SEARCH · Engineering Papers

Results for “particle improvement”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44

All sources NASA NTRS DOE OSTI

NASA NTRS1998

Design of the Experimental Exposure Conditions to Simulate Ionizing Radiation Effects on Candidate Replacement Materials for the Hubble Space Telescope

In this effort, experimental exposure times for monoenergetic electrons and protons were determined to simulate the space radiation environment effects on Teflon components of the Hubble Space Telescope. Although the energy range of the available laboratory particle accelerators was limited, optimal exposure times for 50 keV, 220 keV, 350 keV, and 500 KeV electrons were calculated that produced a dose-versus-depth profile that approximated the full spectrum profile, and were realizable with existing equipment. For the case of proton exposure, the limited energy range of the laboratory accelerator restricted simulation of the dose to a depth of .5 mil. Also, while optimal exposure times were found for 200 keV, 500 keV and 700 keV protons that simulated the full spectrum dose-versus-depth profile to this depth, they were of such short duration that the existing laboratory could not be controlled to within the required accuracy. In addition to the obvious experimental issues, other areas exist in which the analytical work could be advanced. Improved computer codes for the dose prediction- along with improved methodology for data input and output- would accelerate and make more accurate the calculational aspects. This is particularly true in the case of proton fluxes where a paucity of available predictive software appears to exist. The dated nature of many of the existing Monte Carlo particle/radiation transport codes raises the issue as to whether existing codes are sufficient for this type of analysis. Other areas that would result in greater fidelity of laboratory exposure effects to the space environment is the use of a larger number of monoenergetic particle fluxes and improved optimization algorithms to determine the weighting values.

Smith, L. Montgomery↗

DOE OSTI2023

Particle-number fluctuations near the critical point of nuclear matter

Equation of state with the quantum statistics corrections is used for particle-number fluctuations ω of the isotopically symmetric nuclear matter with interparticle van der Waals and Skyrme local density interactions. Here, the fluctuations, ω ∝ 1/K, are analytically derived through the isothermal incompressibility K at first order over a small quantum-statistics parameter. Our approximate analytical results appear to be in good agreement with the results of accurate numerical calculations. These results are also close to those obtained by using more accurate Tolman and Rowlinson expansions of the incompressibility K near the critical point. More general formula for fluctuations ω, improved at the critical point, was obtained for a finite particle-number average $\langle$N$\rangle$ by neglecting, for simplicity, small quantum statistics effects. It is shown that for a large dimensionless parameter, α ∝ K 2 $\langle$N$\rangle$/K", where K" is the second derivative of the incompressibility K as function of the average particle density n, far from the critical point (α >> 1), one finds the traditional asymptote, ω ∝ 1/K, for the fluctuations ω. For a small parameter, α << 1, near the critical point, where K = 0 and α = 0, one obtains another asymptote of ω. These fluctuations, having a maximum near the critical point as function of the average density n, for finite values of $\langle$N$\rangle$ are finite and relatively small, in contrast to the results of the traditional calculations.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

DOE OSTI2024

An improved semi-global intrinsic kinetics model for high temperature carbon oxidation

Measurements of the oxidation rates of various forms of carbon (soot, graphite, coal char) have often shown an unexplained attenuation with increasing temperatures in the vicinity of 2000 K, even when accounting for diffusional transport limitations and gas-phase chemical effects (e.g. CO 2 dissociation). With the development of oxy-fuel combustion approaches for pulverized coal utilization with carbon capture, high particle temperatures are readily achieved in sufficiently oxygen-enriched environments. Here, in this work, a new semi-global intrinsic kinetics model for high temperature carbon oxidation is created by starting with a previously developed 5-step mechanism that was shown to reproduce all major known trends in carbon oxidation, except for its high temperature kinetic falloff, and incorporating a recently discovered surface oxide decomposition step. The predictions of this new model are benchmarked by deploying the kinetic model in a steady-state reacting particle code (SKIPPY) and comparing the simulated results against a carefully measured set of pulverized coal char combustion temperature measurements over a wide range of oxygen concentrations in N 2 and CO 2 environments. The results show that the inclusion of the spontaneous surface oxide decomposition reaction step significantly improves predictions at high particle temperatures. Furthermore, the simulations reveal that O atoms released from the oxide decomposition step enhance the radical pool in the near-surface region and within the particle interior itself. Incorporation of literature rates for O and OH reactions with the carbon surface results in a reduction in the predicted radical pool concentrations and a very minor enhancement of the overall carbon oxidation rate.

33 ADVANCED PROPULSION SYSTEMS↗

DOE OSTI2025

Micron Size NaCrO 2 Particles Enable High‐loading Dry‐processed Electrode for Sodium Ion Batteries

Dry-process fabrication using fibrillatable binder is emerging as a promising method to produce high-loading electrodes for energy storage applications, favored by its cost-efficiency and eco-friendliness. While previous studies have demonstrated the advantages of dry process over the traditional slurry method, there remains a gap in understanding how the particle size of active materials influences the mechanical and electrochemical performance of dry electrodes. In this study, four different particle size NaCrO 2 materials (Average size, S-NCO: 0.6 µm, M1-NCO 1.5 µm, M2-NCO: 4.4 µm, and L-NCO: 9.9 µm) are synthesized to investigate the effect of particle size on dry-processed high-loading electrodes. The findings reveal that the larger micron-sized (>4.4 µm) NCO dry films exhibit significantly improved tensile strength and electrochemical performance, primarily ascribed to the low film porosity, abundant inter-particle connection by the binder, comprehensive carbon coverage, and efficient percolation of the conductive pathway. Notably, a full cell incorporated with a high loading (5.2 mAh cm −2 ) and high active material ratio (96.5 wt.%) L-NCO film electrode demonstrates promising cycling stability and rate capability. Furthermore, these results provide valuable insights regarding the design and fabrication of dry-processed electrodes for future energy storage applications.

25 ENERGY STORAGE↗

DOE OSTI2024

Accelerating the Electrochemical Formation of the δ Phase in Manganese-Rich Rocksalt Cathodes

Mn-rich disordered rocksalt materials with Li-excess (DRX) materials have emerged as a promising class of earth-abundant and energy-dense next-generation cathode materials for lithium-ion batteries. Recently, an electrochemical transformation to a spinel-like “δ” phase has been reported in Mn-rich DRX materials, with improved capacity, rate capability, and cycling stability compared with previous DRX compositions. However, this transformation unfolds slowly over the course of cycling, complicating the development and understanding of these materials. In this work, it is reported that the transformation of Mn-rich DRX materials to the promising δ phase can be promoted to occur much more rapidly by electrochemical pulsing at elevated temperature, rate, and voltage. To extend this concept, micron-sized single-crystal DRX particles are also transformed to the δ phase by the same method, possessing greatly improved cycling stability in the first demonstration of cycling for large, single-crystal DRX particles. To shed light on the formation and specific structure of the δ phase, X-ray diffraction, scanning electron nanodiffraction (SEND) and atomic resolution STEM-HAADF are used to reveal a nanodomain spinel structure with minimal remnant disorder.

25 ENERGY STORAGE↗

NASA NTRSDate not supplied

Test Results for the SEA Ice Crystal Detector (ICD) under SLD Conditions at the NASA IRT

The Science Engineering Associates hot-wire Ice Crystal Detector was tested under Appendix C and Supercooled Large Drop Conditions at the NASA Icing Research Tunnel, with the purpose of comparing the measurements to the tunnel LWC calibration, and to test the performance of the mixed-phase retrievals of the probe. The liquid water content measured by the total water content sensor of the probe agreed well with the tunnel calibration over a wide range of MVDs, not unexpectedly since the tunnel was calibrated with a similar Multiwire hot-wire probe. A scale factor difference of about 7% was attributed to the lack of an efficiency correction for the Ice Crystal Detector at smaller median volume diameters, and typical sample area uncertainties of liquid water content devices. In addition, the simultaneous equations that are used to retrieve liquid and ice water contents were tested under liquid and glaciated conditions. Using constant ice and water efficiencies for each wire, the equations were found to produce a large and false ice water content retrieval in large median volume diameter liquid cases. By applying a liquid efficiency to the liquid water content sensor that varied with median volume diameter, retrievals were improved such that false ice water content was less than ±10% of the total water content out to the 460 μm median volume diameter limit of the testing. The probe was also tested in glaciated conditions by freezing out a small median volume diameter spray. Using constant ice efficiencies for the two sensors provided from aircraft measurements, the retrieved ice water content was about 40% higher than expected for the case presented, likely due to the ice efficiencies that were used from aircraft measurements of natural clouds being too low for the tunnel’s glaciated sprays. Application of ice efficiencies that vary with particle size and potentially other parameters will be explored for future improvement of retrievals.

Air Craft Icing↗

NASA NTRS2021

Test Results for the SEA Ice Crystal Detector (ICD) under SLD Conditions at the NASA IRT

o Aircraft Icing↗

DOE OSTI2023

Resilient GaN-based Power Module with Improved Diagnostic for Future Accelerator

Los Alamos Neutron Science Center (LANSCE) and Dual-Axis Radiographic Hydrodynamic Test facility (DARHT) play a pivotal role in advancing scientific research and national security initiatives. As a premier facility for neutron science, LANSCE and DARHT provide invaluable insights into fundamental research, materials science, nuclear physics, high-energy physics, material science, and medical imaging. Existing (DC) power supply and pulse modulation technologies used in LANSCE and DARHT face limitations in terms of reliability, maintainability, and diagnostics which hinder the progress of these cutting-edge facilities. By proposing improvements to LANL accelerator facilities’ performance and addressing component failure, we aim to enhance scientific outcomes and minimize disruptions, allowing for more efficient and productive research activities while ensuring the continuity of valuable contributions to the user community. This proposal aims to revolutionize (DC) power supply and pulse power systems for future particle accelerators via the development of a resilient GaN-based power module with improved diagnostic and redundant submodules.

43 PARTICLE ACCELERATORS↗

DOE OSTI2022

Layered CAD/CSG geometry for spatially complex radiation transport scenarios

Many spatially complex fission, fusion, and national security Monte Carlo (MC) radiation transport scenarios involve combining computer-aided design (CAD) models with constructive solid geometry (CSG) models. A layered geometry method has been implemented in the Shift MC code to address this need. With layered geometry, multiple CAD and/or CSG models can be clipped, translated, rotated, and placed in overlapping layers to form transport-ready geometries. Here, the utility of this method is demonstrated with two problems: (1) a fixed-source simulation with a layered geometry consisting of a LiDAR-generated CAD model of the Combined Arms Collective Training Facility urban environment overlaid with CSG models of a mock hotel and a detector apparatus, and (2) a k-eigenvalue calculation using a layered geometry model of the Transformational Challenge Reactor consisting of CAD fuel elements placed in a CSG core. Tallied particle flux distributions match expectations, but tracking robustness must be improved prior to general-purpose use.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

DOE OSTI2024

High protonic resistance of hydrocarbon-based cathodes in PEM fuel cells under low humidity conditions: Origin, implication, and mitigation

Hydrocarbon-based electrodes for proton-exchange membrane fuel cells face challenges in closing the performance gap with electrodes based on perfluorosulfonic acid ionomers, particularly under low humidity conditions. Alongside increased oxygen transport resistance and higher kinetic-induced overpotentials, the protonic resistance of these fluorine-free electrodes is the primary hurdle to improved performance. This study systematically investigates the origin and impact of the cathode protonic resistance on fuel cell performance, utilizing sulfonated phenylated polyphenylenes as hydrocarbon ionomers. Electrochemical characterization at low relative humidity (≤50 %) reveal a high protonic resistance arising from both lower conductivity of the hydrocarbon thin film compared to the bulk membrane and increased cathode tortuosity at a gas transport-optimized ionomer to carbon (I/C) ratio of 0.2. The poor protonic resistance at low relative humidities leads to a non-homogeneous current distribution across the thickness of the cathode electrode, resulting in lower catalyst utilization. To address this issue, reducing the thickness of the cathode CL while maintaining a constant Pt loading (i.e., increasing the Pt on carbon ratio) significantly reduces protonic resistance. This improvement compensates for the kinetic disadvantages of highly loaded carbon particles and results in a considerable performance increase by 40 % at 0.75 V under low relative humidities.

25 ENERGY STORAGE↗

DOE OSTI2025

High performance porous Si anode enabled by an organic-solvent assisted etching process

Silicon (Si) is a promising anode for the next generation of lithium-ion batteries, but its large volume changes (~300 %) during cycling hindered its practical applications. One method to improve its stability is to etch micron sized Si/SiO 2 particles to form porous Si (p-Si) and accommodate volume changes internally. However, the conventional HF etching method generates excess gas/heat and is difficult to scale up. Herein, we developed an organic-solvent-assisted HF etching process (O-HF) using a mixture of benzene and saturated HF aqueous solution. The organic solvent can be preferentially absorbed on the surface of Si/SiO 2 powder so etching rate of SiO 2 can be controlled to avoid rapid gas/heat generation. This method can also prevent over-etching of Si by minimizing direct contact/react between water and newly exposed Si. Si||NMC622 cells using carbon coated p-Si particles prepared by optimized O-HF etching process demonstrate a capacity retention of 82.0 % after 500 cycles, which is much better than those prepared by conventional HF etching (73.7 %). The thickness of Si anode increases only ~10 % during the initial lithiation, which is comparable with those of graphite anode. In conclusion, the O-HF etching strategy developed in this work can also be applied to the etching of a broad range of materials.

HF etching↗

DOE OSTI2026

RU-net for automatic characterization of TRISO fuel cross sections

During irradiation, phenomena such as kernel swelling and buffer densification may impact the performance of tristructural isotropic (TRISO) particle fuel. Post-irradiation microscopy is often used to identify these irradiation-induced morphologic changes. However, each fuel compact generally contains thousands of TRISO particles. Manually performing the work to get statistical information on these phenomena is cumbersome and subjective. Here, to reduce the subjectivity inherent in that process and to accelerate data analysis, we used convolutional neural networks (CNNs) to automatically segment cross-sectional images of microscopic TRISO layers. CNNs are a class of machine-learning algorithms specifically designed for processing structured grid data. They have gained popularity in recent years due to their remarkable performance in various computer vision tasks, including image classification, object detection, and image segmentation. In this research, we generated a large irradiated TRISO layer dataset with more than 2,000 microscopic images of cross-sectional TRISO particles and the corresponding annotated images. Based on these annotated images, we used different CNNs to automatically segment different TRISO layers. These CNNs include RU-Net (developed in this study), as well as three existing architectures: U-Net, Residual Network (ResNet), and Attention U-Net. The preliminary results show that the model based on RU-Net performs best in terms of Intersection over Union (IoU). Using CNN models, we can expedite the analysis of TRISO particle cross sections, significantly reducing the manual labor involved and improving the objectivity of the segmentation results.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

DOE OSTI2021

Test beam characterization of sensor prototypes for the CMS Barrel MIP Timing Detector

The MIP Timing Detector will provide additional timing capabilities for detection of minimum ionizing particles (MIPs) at CMS during the High Luminosity LHC era, improving event reconstruction and pileup rejection. The central portion of the detector, the Barrel Timing Layer (BTL), will be instrumented with LYSO:Ce crystals and Silicon Photomultipliers (SiPMs) providing a time resolution of about 30 ps at the beginning of operation, and degrading to 50-60 ps at the end of the detector lifetime as a result of radiation damage. In this work, we present the results obtained using a 120 GeV proton beam at the Fermilab Test Beam Facility to measure the time resolution of unirradiated sensors. A proof-of-concept of the sensor layout proposed for the barrel region of the MTD, consisting of elongated crystal bars with dimensions of about 3×3×57 mm3 and with double-ended SiPM readout, is demonstrated. This design provides a robust time measurement independent of the impact point of the MIP along the crystal bar. We tested LYSO:Ce bars of different thickness (2, 3, 4 mm) with a geometry close to the reference design and coupled to SiPMs manufactured by Hamamatsu and Fondazione Bruno Kessler. The various aspects influencing the timing performance such as the crystal thickness, properties of the SiPMs (e.g. photon detection efficiency), and impact angle of the MIP are studied. A time resolution of about 28 ps is measured for MIPs crossing a 3 mm thick crystal bar, corresponding to a most probable value (MPV) of energy deposition of 2.6 MeV, and of 22 ps for the 4.2 MeV MPV energy deposition expected in the BTL, matching the detector performance target for unirradiated devices.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

DOE OSTI2021

Improvements to the macroscopic-microscopic approach of nuclear fission

The well-established macroscopic-microscopic (mac-mic) description of nuclear fission enables the prediction of fission-fragment yields for a broad range of fissioning systems. In this work, we present several key enhancements to this approach. We improve upon the microscopic sector of nuclear potential-energy surfaces by magnifying the resolution of the Lipkin-Nogami equations and strengthening the Strutinsky procedure, thus reducing spurious effects from the continuum. We further present a novel deterministic method for calculating fission dynamics under the assumption of strongly damped nucleonic motion. Our technique directly determines the evolution of the scissioned shape distribution according to the number of random-walk steps rather than the statistical accumulation of fission events. We show that our new technique is equivalent to the Metropolis random walk pioneered over the past decade by Randrup and colleagues. It further improves upon it because we remove the need for altering the nuclear landscape via a biased potential. With our final improvement, we calculate fission fragments mass and charge distributions using particle number projection, which affords the simultaneous calculation of both mass- and charge-yield distributions. Fission fragments are thus calculated from the quantum-mechanical A -body states of the potential-energy surface rather than from the collective mass asymmetry variable α g of the finite-range liquid-drop model used in past work. We highlight the success of our enhancements by predicting the odd-even staggering and the charge polarization for the neutron-induced fission of 233 U and 235 U .

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

DOE OSTI2022

Models of ultraheavy dark matter visible to macroscopic mechanical sensing arrays

In recent years, the sensitivity of optomechanical force sensors has improved leading to increased interest in using these devices as particle detectors. In this study we consider scenarios where dark matter with mass close to the Planck scale may be probed by a large array of optomechanical accelerometers. We motivate a macroscopic mechanical search for ultraheavy dark matter, exemplified by the efforts of the Windchime Collaboration, by providing a survey of the model space that would be visible to such a search. We consider two classes of models, one that invokes a new long-range unscreened force and another that is only gravitationally interacting. We identify significant regions of well-motivated, potentially visible parameter space for versatile models such as Q-balls, composite dark matter, relics of gravitational singularities, and gravitationally produced ultraheavy particles.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2021

Granular Flow

LIGGGHTS-INL is a capability-extended version of LIGGGHTS. LIGGGHTS is an Open Source Discrete Element Method Particle Simulation Software (https://www.cfdem.com/media/DEM/docu/Manual.html). LIGGGHTS stands for LAMMPS improved for general granular and granular heat transfer simulations. LAMMPS is a classical molecular dynamics simulator. It is widely used in the field of Molecular Dynamics (https://lammps.sandia.gov/doc/Manual.html). Thanks to physical and algorithmic analogies, LAMMPS is a very good platform for DEM simulations. LAMMPS offers a GRANULAR package to perform these kinds of simulations. LIGGGHTS aims to improve those capability with the goal to apply it to industrial applications.

Xia, Yidong↗

DOE OSTI2024

Bayesian optimization scheme for the design of a nanofibrous high power target

High Power Targetry (HPT) R&D is critical in the context of increasing beam intensity and energy for next generation accelerators. Many target concepts and novel materials are being developed and tested for their ability to withstand extreme beam environments; the HPT R&D Group at Fermilab is developing an electrospun nanofiber material for this purpose. The performance of these nanofiber targets is sensitive to their construction parameters, such as the packing density of the fibers. Lowering the density improves the survival of the target, but reduces the secondary particle yield. Optimizing the lifetime and production efficiency of the target poses an interesting design problem, and in this paper we study the applicability of Bayesian optimization to its solution. We first describe how to encode the nanofiber target design problem as the optimization of an objective function, and how to evaluate that function with computer simulations. We then explain the optimization loop setup. Thereafter, we present the optimal design parameters suggested by the algorithm, and close with discussions of limitations and future refinements.

43 PARTICLE ACCELERATORS↗

DOE OSTI2021

Gravity loop integrands from the ultraviolet

We demonstrate that loop integrands of (super-)gravity scattering amplitudes possess surprising properties in the ultraviolet (UV) region. In particular, we study the scaling of multi-particle unitarity cuts for asymptotically large momenta and expose an improved UV behavior of four-dimensional cuts through seven loops as compared to standard expectations. For N=8 supergravity, we show that the improved large momentum scaling combined with the behavior of the integrand under BCFW deformations of external kinematics uniquely fixes the loop integrands in a number of non-trivial cases. In the integrand construction, all scaling conditions are homogeneous. Therefore, the only required information about the amplitude is its vanishing at particular points in momentum space. This homogeneous construction gives indirect evidence for a new geometric picture for graviton amplitudes similar to the one found for planar N=4 super Yang-Mills theory. We also show how the behavior at infinity is related to the scaling of tree-level amplitudes under certain multi-line chiral shifts which can be used to construct new recursion relations.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗