Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “parameter sampling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

sPHENIX heavy flavor jet tagging studies in p+p at $\sqrt{s_{NN}}=200~GeV$

Heavy-flavor jets, which are initiated from heavy quarks, are ideal probes for studying flavor dependent parton energy loss. We report on the performance of jet flavor tagging using two Neural Network Machine Learning (ML) models: the Long Short-Term Memory (LSTM) model and an Attention-based Neural Network, in simulations of 200 GeV p + p collisions. The tagging performance of bottom quark initiated jets with both ML models surpasses that of the traditional cut-based method. Technical details, including sample and kinematic variable selections, the machine learning training and testing setup with parameter tuning, and outcome comparisons, will be discussed.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2022

Analyzing rotational bands in odd-mass nuclei using effective field theory and Bayesian methods

We recently developed an Effective Field Theory (EFT) for rotational bands in odd-mass nuclei. Here we use EFT expressions to perform a Bayesian analysis of data on the rotational energy levels of 99 Tc, 155,157 Gd, 159 Dy, 167,169 Er, 167,169 Tm, 183 W, 235 U and 239 Pu. The error model in our Bayesian analysis includes both experimental and EFT truncation uncertainties. It also accounts for the fact that low-energy constants (LECs) at even and odd orders are expected to have different sizes. We use Markov Chain Monte Carlo (MCMC) sampling to explore the joint posterior of the EFT and error-model parameters and show both the LECs and the breakdown scale can be reliably determined. We extract the LECs up to fourth order in the EFT and find that, provided we correctly account for EFT truncation errors in our likelihood, results for lower-order LECs are stable as we go to higher orders. LEC results are also stable with respect to the addition of higher-energy data. We extract the expansion parameter for all the nuclei listed above and find a clear correlation between the extracted and the expected value of the inverse breakdown scale, W, based on the single-particle and vibrational energy scales. However, the W that actually determines the convergence of the EFT expansion is markedly smaller than would be naively expected based on those scales.

EFT↗
DOE OSTI2022

The Influence of 10 Unique Chemical Elements in Shaping the Distribution of Kepler Planets

The chemical abundances of planet-hosting stars offer a glimpse into the composition of planet-forming environments. To further understand this connection, we make the first ever measurement of the correlation between planet occurrence and chemical abundances for ten different elements (C, Mg, Al, Si, S, K, Ca, Mn, Fe, and Ni). Leveraging data from the Apache Point Observatory Galactic Evolution Experiment (APOGEE) and Gaia to derive precise stellar parameters (${\sigma }_{{R}_{\star }}\approx 2.3 \% $, ${\sigma }_{{M}_{\star }}\approx 4.5 \% $) for a sample of 1018 Kepler Objects of Interest, we construct a sample of well-vetted Kepler planets with precisely measured radii (${\sigma }_{{R}_{p}}\approx 3.4 \% $). After controlling for biases in the Kepler detection pipeline and the selection function of the APOGEE survey, we characterize the relationship between planet occurrence and chemical abundance as the number density of nuclei of each element in a star's photosphere raised to a power, β. varies by planet type, but is consistent within our uncertainties across all ten elements. For hot planets (P = 1–10 days), an enhancement in any element of 0.1 dex corresponds to an increased occurrence of ≈20% for super-Earths (Rp = 1–1.9 R⊕) and ≈60% for sub-Neptunes (Rp = 1.9–4 R⊕). Trends are weaker for warm (P = 10–100 days) planets of all sizes and for all elements, with the potential exception of sub-Saturns (Rp = 4–8 R⊕). Finally, we conclude this work with a caution to interpreting trends between planet occurrence and stellar age due to degeneracies caused by Galactic chemical evolution and make predictions for planet occurrence rates in nearby open clusters to facilitate demographics studies of young planetary systems.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

Modeling the Spectral Diversity of Quasars in the Sixteenth Data Release from the Sloan Digital Sky Survey

Abstract We present a new approach to capturing the broad diversity of emission-line and continuum properties in quasar spectra. We identify populations of spectrally similar quasars through pixel-level clustering on 12,968 high signal-to-noise ratio (S/N) spectra from the Sloan Digital Sky Survey (SDSS) in the redshift range of 1.57 < z < 2.4. Our clustering analysis finds 396 quasar spectra that are not assigned to any population, 15 misclassified spectra, and 6 quasars with incorrect redshifts. We compress the quasar populations into a library of 684 high-S/N composite spectra, anchored in redshift space by the Mg ii emission line. Principal component analysis on the library results in an eigenspectrum basis spanning 1067–4007 Å. We model independent samples of SDSS quasar spectra with the eigenbasis, allowing for a free redshift parameter. Our models achieve a median reduced χ 2 on non–broad absorption line quasar spectra that is reduced by 8.5% relative to models using the eigenspectra from the SDSS spectroscopic pipeline. A significant contribution to the relative improvement is from the ability to reconstruct the range of emission-line variation. The redshift estimates from our model are consistent with the Mg ii emission-line redshift with an average offset that displays 51.4% less redshift-dependent variation relative to the SDSS eigenspectra. Our method for developing quasar spectra models can improve automated classification and predict the intrinsic spectrum in regions affected by intervening absorbers such as Ly α , C iv , and Mg ii , thus benefiting studies of large-scale structure.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

Subgalactic Scaling Relations with T e -based Metallicities of Low-metallicity Regions in Galaxies: Metal-poor Gas Inflow May Have Important Effects?

The scaling relationship is a fundamental probe of the evolution of galaxies. Using the integral field spectroscopic data from the Mapping Nearby Galaxies at Apache Point Observatory survey, we select 1698 spaxels with a significant detection of the auroral emission line [O ιιι]λ4363 from 52 galaxies to investigate the scaling relationships at the low-metallicity end. We find that our sample’s star formation rate is higher and its metallicity is lower in the scaling relationship than the star-forming sequence after removing the contribution of the Fundamental Metallicity Relation. We also find that the stellar ages of our sample are younger (<1 Gyr) and the stellar metallicities are also lower. Morphological parameters from the Deep Learning catalog indicate that our galaxies are more likely to be mergers. These results suggest that their low-metallicity regions may be related to interaction; the inflow of metal-poor gas may dilute the interstellar medium and form new metal-poor stars in these galaxies during interactions.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

A Study on Surface Texture and Wettability of Femtosecond Laser Treated Aluminum Alloys

This research aims to study the effects of femtosecond laser treatment on surface texture and wettability properties. The first portion of this research studies 2024-T3 aluminum alloy concerning surface texture (e.g., roughness), wettability, and surface free energy. SEM images help aid the researchers in detecting minuscule changes in surface texture. Profilometry extracts topographical data from the surface. A contact angle goniometer measures contact angle, which follows the sessile drop method. Owens, Wendt, Rabel, and Kaelble's method calculates the surface free energy in conjunction with the contact angle. Femtosecond laser modification produces relatively uniform surface morphology at the macroscale. When looking at the microscale, surface morphology differs depending on the interplay between material melting and self-assembly, where the surface becomes rougher after laser treatment. Contact angle results show that all but the control sample and sample 7 exhibit hydrophobic behavior, i.e., contact angle >90°, with Sample 1 having the most significant angle of 115°. The effects of laser parameters on surface energy is apparent. More work is needed to establish correlations among these three quantities: contact angle, surface energy, and laser parameters. The second portion of this research studies aluminum alloy 6061 as the subject material with the primary goal of creating a superhydrophobic surface. A central composite design creates the laser surface texturing design of experiments. SEM images help aid the researchers in detecting minuscule changes in surface texture. A 3D optical profiler extracts topographical data from the surface. The sessile drop method incorporates a contact angle goniometer to measure the contact angle. The response surface method builds a second-order polynomial model for the contact angle and obtains optimized parameters to maximize the contact angle. This research shows that laser surface texturing can generate a wide range of surface profiles and roughness values with geometric features ranging from hundreds of μm to submicron. All three laser parameters (pulse energy, pulse duration, repetition rate) affect surface roughness and contact angle to some degree. To quantify the relationship between the contact angle, pulse energy, and pulse repetition rate, a response surface model for Al 6061 is identified and used to find the optimal conditions of E=214 μJ, tp=10 ps, and fp=2427 Hz with a predicted maximum contact angle of 161°. A confirmation experiment produces a contact angle of 168°, in good agreement with the predicted value.

Angell, Dakota↗
DOE OSTI2024

A Deep Learning-Driven Sampling Technique to Explore the Phase Space of an RNA Stem-Loop

The folding and unfolding of RNA stem-loops are critical biological processes; however, their computational studies are often hampered by the ruggedness of their folding landscape, necessitating long simulation times at the atomistic scale. Here, we adapted DeepDriveMD (DDMD), an advanced deep learning-driven sampling technique originally developed for protein folding, to address the challenges of RNA stem-loop folding. Although tempering- and order parameter-based techniques are commonly used for similar rare-event problems, the computational costs or the need for a priori knowledge about the system often present a challenge in their effective use. DDMD overcomes these challenges by adaptively learning from an ensemble of running MD simulations using generic contact maps as the raw input. DeepDriveMD enables on-the-fly learning of a low-dimensional latent representation and guides the simulation toward the undersampled regions while optimizing the resources to explore the relevant parts of the phase space. We showed that DDMD estimates the free energy landscape of the RNA stem-loop reasonably well at room temperature. Our simulation framework runs at a constant temperature without external biasing potential, hence preserving the information on transition rates, with a computational cost much lower than that of the simulations performed with external biasing potentials. Here, we also introduced a reweighting strategy for obtaining unbiased free energy surfaces and presented a qualitative analysis of the latent space. This analysis showed that the latent space captures the relevant slow degrees of freedom for the RNA folding problem of interest. Finally, throughout the manuscript, we outlined how different parameters are selected and optimized to adapt DDMD for this system. We believe this compendium of decision-making processes will help new users adapt this technique for the rare-event sampling problems of their interest.

Gupta, Ayush↗
DOE OSTI2021

Startup Test Plan and Predictions for Highly Enriched Uranium to Low-Enriched Uranium Fuel Conversion at the University of Missouri Research Reactor

Nonpower reactors licensed by the U.S. Nuclear Regulatory Commission require a startup test plan as part of any facility modification to verify operability prior to resumption of operations. In order to support conversion of the University of Missouri Research Reactor from the use of highly enriched uranium to low-enriched uranium (LEU) fuel, a startup test plan has been devised to measure certain reactor physics parameters for the initial all-fresh LEU core licensing documentation that will be submitted. These parameters include the approach to critical, primary coolant void coefficient of reactivity, flux trap void coefficient of reactivity, determination of flux trap sample reactivity worth, radial and axial thermal neutron flux mapping, control blade worth calibration, primary and pool coolant temperature coefficient of reactivity, and flux mapping of experimental positions. Here, predictions for these parameters made using the Monte Carlo N-Particle Version 5 (MCNP5) radiation transport code are reported. These predictions will support the startup tests by providing a baseline set of expectations and additional insight into the performance of the LEU core.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2024

High-Throughput Microstructural Characterization and Process Correlation Using Automated Electron Backscatter Diffraction

The need to optimize the processing conditions of additively manufactured (AM) metals and alloys has driven advances in throughput capabilities for material property measurements such as tensile strength or hardness. High-throughput (HT) characterization of AM metal microstructure has fallen significantly behind the pace of property measurements due to intrinsic bottlenecks associated with the artisan and labor-intensive preparation methods required to produce highly polished surfaces. This inequality in data throughput has led to a reliance on heuristics to connect process to structure or structure to properties for AM structural materials. In this study, we show a transformative approach to achieve laser powder bed fusion (LPBF) printing, HT preparation using dry electropolishing and HT electron backscatter diffraction (EBSD). This approach was used to construct a library of > 600 experimental EBSD sample sets spanning a diverse range of LPBF process conditions for AM Kovar. This vast library is far more expansive in parameter space than most state-of-the-art studies, yet it required only approximately 10 labor hours to acquire. Build geometries, surface preparation methods, and microscopy details, as well as the entire library of >600 EBSD data sets over the two sample design versions, have been shared with intent for the materials community to leverage the data and further advance the approach. Using this library, we investigated process–structure relationships and uncovered an unexpected, strong dependence of microstructure on location within the build, when varied, using otherwise identical laser parameters.

Characterization and Analytical Technique↗
DOE OSTI2022

Stringent σ8 constraints from small-scale galaxy clustering using a hybrid MCMC + emulator framework

ABSTRACT We present a novel simulation-based hybrid emulator approach that maximally derives cosmological and Halo Occupation Distribution (HOD) information from non-linear galaxy clustering, with sufficient precision for DESI Year 1 (Y1) analysis. Our hybrid approach first samples the HOD space on a fixed cosmological simulation grid to constrain the high-likelihood region of cosmology + HOD parameter space, and then constructs the emulator within this constrained region. This approach significantly reduces the parameter volume emulated over, thus achieving much smaller emulator errors with fixed number of training points. We demonstrate that this combined with state-of-the-art simulations result in tight emulator errors comparable to expected DESI Y1 LRG sample variance. We leverage the new abacussummit simulations and apply our hybrid approach to CMASS non-linear galaxy clustering data. We infer constraints on σ8 = 0.762 ± 0.024 and fσ8(zeff = 0.52) = 0.444 ± 0.016, the tightest among contemporary galaxy clustering studies. We also demonstrate that our fσ8 constraint is robust against secondary biases and other HOD model choices, a critical first step towards showcasing the robust cosmology information accessible in non-linear scales. We speculate that the additional statistical power of DESI Y1 should tighten the growth rate constraints by at least another 50–60 ${{\ \rm per\ cent}}$, significantly elucidating any potential tension with Planck. We also address the ‘lensing is low’ tension, which we find to be in the same direction as a potential tension in fσ8. We show that the combined effect of a lower fσ8 and environment-based bias accounts for approximately $50{{\ \rm per\ cent}}$ of the discrepancy.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2023

Optimal PMU design based on sampling model and sensitivity analysis

The precise measurements of the synchrophasor and frequency from phasor measurement units (PMUs) are widely used in power grid applications. With the improvement of the technique, applications always require stable dynamic performance and higher accuracy for the synchrophasor and frequency measurements, which is challenging for PMU development. To evaluate the contribution of PMU hardware to measurement accuracy, this paper proposes a general-purpose sampling model to analyze the measurement error. In the proposed sampling model, a strict mathematical derivation is derived, where its error is purely determined by the parameters of the PMU hardware. The sensitivity analysis is carried out by three methods, including mathematical analysis, computer simulation, and variance-based sensitivity analysis. Through the sensitivity analysis, this paper establishes the systematic formulation and the inclusion of synchrophasor, frequency, and ROCOF. Experimental results based on the real-world testbench involving distribution-level PMUs match the mathematical analysis conclusion, which verifies the correctness of the general-purpose sampling model. Furthermore, a strategy for the optimal PMU design is proposed, which could guide PMU design in the future.

42 ENGINEERING↗
DOE OSTI2024

Understanding vortex dynamics in CaK(Fe,Ni) 4 As 4 and Ba(Fe,Co) 2 As 2 single crystals under the influence of random point disorder

We report on the influence of doping on vortex dynamics in 3 MeV proton-irradiated single crystals of CaK(Fe 1–x Ni x ) 4 As 4 (1144, x = 0.015, 0.025, and 0.03) and Ba(Fe 1–x Co x ) 2 As 2 (x = 0.04, 0.062, 0.066 and 0.074). Non-irradiated crystals of the 1144 system display superconducting critical temperatures ranging from 31 K for x = 0.015–20.5 K, as doping increases to 0.03. On the other hand, pristine crystals of the 122 system show T c values between 14.6 and 23.6 K, with the maximum T c occurring at intermediate doping levels. The fluence was set at 3 × 10 16 p cm –2 , resulting in a decrease in the T c by around 1.5 K for all samples and significantly affecting the vortex dynamics by reducing the flux creep relaxation compared to previously reported values for unirradiated crystals. Parameters such as vortex pinning energy U 0 and the glassy exponent μ dependencies on doping and magnetic field strength are identified. For the 1144 system, U 0 reaches values approaching 500 K for small fields in samples with T c = 29.3 K (x = 0.015), systematically decreasing to around 200 K as T c falls below 20 K. Furthermore, U 0 decreases as the field increases to 3 T for the same sample, varying from approximately 250 K to 100 K as T c decreases. These changes are typically accompanied by modifications in μ, gradually increasing from values around 1 towards 1.5, corresponding to small bundle relaxation in the collective creep theory. Despite differences in the substitutional disorder and magnetic phase diagram with respect to the 1144 system, the results for 122 single crystals follow a similar tendency in which U 0 usually reduces and μ increase rise as the applied magnetic field is increased. Due to moderate U 0 in these systems (few hundreds of kelvins), the resulting decay of persistent current at liquid helium temperatures is primarily determined by a balance between U 0 and bundle size contribution. Furthermore, these findings provide valuable insights for potential applications of these systems, particularly in the context of intrinsic superconducting parameters and the resulting pinning landscape.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Implementing Faraday effect measurement constraints into the Grad–Shafranov equilibrium fitting code EFIT

A new tool for the exploration and diagnosis of the internal magnetic field of plasmas in the DIII-D tokamak in the form of a constraint on the EFIT (Equilibrium Fitting) Grad–Shafranov code based on the Faraday-effect Radial Interferometer-Polarimeter (RIP) diagnostic is presented, including description, verification, and sample application. The physics underlying the diagnostic and its implementation into EFIT are discussed, and the results showing the verification of the model are given, and the model’s limitations are discussed. The influence of the diagnostic’s input on the resulting equilibrium parameters is characterized. Furthermore, the effect of electron density profile refinement is evaluated and found to be negligible. A sample application of the diagnostic is shown, indicating that the RIP constraint has similar effects on the equilibrium as motional Stark effect constraints do.

47 OTHER INSTRUMENTATION↗
DOE OSTI2022

SDSS-IV MaStar: Stellar parameter determination with continuum-supplemented full-spectrum fitting

We present a stellar parameter catalog built to accompany the MaStar Stellar Library, which is a comprehensive collection of empirical, medium-resolution stellar spectra. We constructed this parameter catalog by using a multicomponent χ 2 fitting approach to match MaStar spectra to models generated by interpolating the ATLAS9-based BOSZ model spectra. The total χ 2 for a given model is defined as the sum of components constructed to characterize narrow-band features of observed spectra (e.g., absorption lines) and the broadband continuum shape separately. Extinction and systematics due to flux calibration were taken into account in the fitting. The χ 2 distribution for a given region of model space was sampled using a Markov chain Monte Carlo (MCMC) algorithm, the data from which were then used to extract atmospheric parameter estimates (T eff , log g, [Fe/H], and [α/Fe]), their corresponding uncertainties, and direct extinction measurements. Two methods were used to extract parameters and uncertainties: one that accepts the MCMC’s prescribed minimum-χ 2 result, and one that uses Bayesian inference to compute a likelihood-weighted mean from the χ 2 distribution sampled by the MCMC. Results were evaluated for internal consistency using repeat observations where available and by comparing them with external data sets (e.g., APOGEE-2 and Gaia DR2). Our spectral-fitting exercise reveals possible deficiencies in current theoretical model spectra, illustrating the potential power of MaStar spectra for helping to improve the models. This paper represents an update to the parameters that were originally presented with SDSS-IV DR17. The MaStar parameter catalog containing our BestFit results is available on the SDSS-IV DR17 website as part of version 2 of the MaStar stellar parameter value-added catalog.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2024

Tracing back the birth environments of Type Ia supernova progenitor stars: a pilot study based on 44 early-type host galaxies

The environmental dependence of Type Ia supernova (SN Ia) luminosities is well established, and efforts are being made to find its origin. Previous studies typically use the currently observed status of the host galaxy. However, given the delay time between the birth of the progenitor star and the SN Ia explosion, the currently observed status may differ from the birth environment of the SN Ia progenitor star. In this paper, employing the chemical evolution and accurately determined stellar population properties of 44 early-type host galaxies, we, for the first time, estimate the SN Ia progenitor star birth environment, specifically [Fe/H] Birth and [α/Fe] Birth . We show that [α/Fe] Birth has a $30.4^{\text{+10.6}}_{-10.1}{{\ \rm per\ cent}}$ wider range than the currently observed [α/Fe] Current , while the range of [Fe/H] Birth is not statistically different ($17.9^{\text{+26.0}}_{-27.1}{{\ \rm per\ cent}}$) to that of [Fe/H] Current . The birth and current environments of [Fe/H] and [α/Fe] are sampled from different populations (p-values of the Kolmogorov–Smirnov test <0.01). We find that light-curve fit parameters are insensitive to [Fe/H] Birth (<0.9σ for the non-zero slope), while a linear trend is observed with Hubble residuals (HRs) at the 2.4σ significance level. With [α/Fe] Birth , no linear trends (<1.1σ) are observed. Interestingly, we find that [α/Fe] Birth clearly splits the SN Ia sample into two groups: SN Ia exploded in [α/Fe] Birth -rich or [α/Fe ]Birth -poor environments. SNe Ia exploded in different [α/Fe] Birth groups have different weighted-means of light-curve shape parameters: 0.81 ± 0.33 (2.5σ). They are thought to be drawn from different populations (p-value = 0.01). Regarding SN Ia colour and HRs, there is no difference (<1.0σ) in the weighted-means and distribution (p-value > 0.27) of each [α/Fe] Birth group.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2026

The Art of Automation: Translating Electron Microscopy Workflows Into Automated Processes

Acquiring data using a scanning transmission electron microscope (STEM) is a complex, multi-step process. The intricacy of the process depends on the type of sample, composition of the material, desired results of the experiment, resolution requirement and other experimental factors. Each experiment presents unique complications, such as sample drift and contamination, that the microscopist must consider when acquiring data. All these challenges are handled fluidly and expertly by experienced microscopists, but to reach new levels of innovation in material development, including greater reproducibility, throughput, and precision, the automation of these workflows is essential. The initial phase of this work involved translating intuition-based workflows into discrete, programmable steps. Some common key stages in STEM workflows are the initial tuning, scanning the sample for areas of interest, and then acquiring the data. Each stage can be broken further into specific parameter adjustments, such as aberration correction and dwell time optimization, depending on the experiment. When deconstructing various experiments each step was assessed for automation feasibility based on the amount of real time operator decisions. There are steps that lend themselves to automation more readily than others, such as course focusing and sample screening, but there is potential for full automation of all stages with time. As an initial step, an automated montage routine was developed, allowing for the efficient acquisition of large portions of the sample without requiring continuous intervention from the operator. The automation of this small process of the procedure demonstrates the value of this capability. A major challenge in automation arises from discrepancies between commanded, reported and actual stage movements. Using systematic tests, stage movement was quantified. This error can be corrected algorithmically for more accurate workflows in the future. Expanding automation capabilities would result in larger, more efficient data acquisition which allows for more robust statistical analysis. Additionally, this work lays the groundwork for a closed loop system where machine learning algorithms would intake automatically acquired data and make real time decisions. By progressively automating this instrument, this work establishes the foundation for fully automated experimentation in transmission electron microscopy.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2021

Data Report on Post-Irradiation Dimensional Change of AGC-1 Samples

This report documents the measured post irradiation dimensional change in the AGC-1 samples. The AGC-1 capsule is the first in six planned irradiation capsules comprising the Advanced Graphite Creep (AGC) test series. AGC-1 irradiation began September 5, 2009 in the Advanced Test Reactor (ATR) and was completed on January 8, 2011. The capsule was cooled for 3 months in the ATR Canal, and then shipped to MFC in April 2011 for disassembly and sample extraction. After extraction the samples were shipped to the INL Research Center (IRC) for initial post-irradiation examination (PIE) and storage in the irradiated graphite vault. The AGC-1 capsule design contained “matched pair” samples to ascertain the irradiation-induced dimensional changes and levels of creep experienced in different graphite types. The irradiation-induced dimensional changes and creep levels are determined by comparing the total dimensional change for stressed and unstressed samples of the same type of graphite exposed to the same dose levels and at similar temperatures. Under irradiation creep (i.e. permanent strain due to irradiation, stress, and temperature) the stressed samples should demonstrate more dimensional change than the unstressed samples. This additional dimensional change in the stressed samples is designated as “irradiation-induced creep” in graphite. The data are further presented using the parameters influencing dimensional change in graphite; levels of induced stress, temperature, graphite type, and dose. However, the AGC-1 post-irradiation examination is a significant endeavor and this data report serves to provide irradiation-induced dimensional change data for AGC capsule design refinement as well as a status on the progress of the PIE activities. The dimensional changes of both the samples and graphite body are very important to the design of the future AGC capsules (AGC-3 through AGC-6) and are provided as soon as the data are available in order to determine whether design changes to the next capsule are required. A complete evaluation of the irradiation-induced dimensional change data will be performed for a final AGC-1 PIE report that will include full analysis of pre- and post-irradiation data, with verified AGC-1 irradiation conditions of temperature and dose.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2025

Quantitative Modeling of High-Energy Electron Scattering in Thick Samples Using Monte Carlo Techniques

Cryo-electron microscopy (cryo-EM) is a powerful tool for imaging biological samples but is typically limited by sample thickness, which is restricted to a few hundred nanometers depending on the electron energy. However, there is a growing need for imaging techniques capable of studying biological samples up to 10 µm in thickness while maintaining nanoscale resolution. This need motivates the use of mega-electron-volt scanning transmission electron microscopy (MeV-STEM), which leverages the high penetration power of MeV electrons to generate high-resolution images of thicker samples. In this study, we employ Monte Carlo simulations to model electron–sample interactions and explore the signal decay of imaging electrons through thick specimens. By incorporating material properties, interaction cross-sections for energy loss, and experimental parameters, we investigate the relationship between the incident and transmitted beam intensities. Key factors such as detector collection angle, convergence semi-angle, and the material properties of samples were analyzed. Our results demonstrate that the relationship between incident and transmitted beam intensities follows the Beer–Lambert law over thicknesses ranging from a few microns to several tens of microns, depending on material composition, electron energy, and collection angles. The linear depth of silicon dioxide reaches 3.9 µm at 3 MeV, about 6 times higher than that at 300 keV. Meanwhile, the linear depth of amorphous ice reaches 17.9 µm at 3 MeV, approximately 11.5 times higher than that at 300 keV. These findings are crucial for advancing the study of thick biological and semiconductor samples using MeV-STEM.

36 MATERIALS SCIENCE↗