Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “packing density”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44

Microstructure-Sensitive Uncertainty Quantification for Crystal Plasticity Finite Element Constitutive Models Using Stochastic Collocation Methods

Uncertainty quantification (UQ) plays a major role in verification and validation for computational engineering models and simulations, and establishes trust in the predictive capability of computational models. In the materials science and engineering context, where the process-structure-property-performance linkage is well known to be the only road mapping from manufacturing to engineering performance, numerous integrated computational materials engineering (ICME) models have been developed across a wide spectrum of length-scales and time-scales to relieve the burden of resource-intensive experiments. Within the structure-property linkage, crystal plasticity finite element method (CPFEM) models have been widely used since they are one of a few ICME toolboxes that allows numerical predictions, providing the bridge from microstructure to materials properties and performances. Several constitutive models have been proposed in the last few decades to capture the mechanics and plasticity behavior of materials. While some UQ studies have been performed, the robustness and uncertainty of these constitutive models have not been rigorously established. In this work, we apply a stochastic collocation (SC) method, which is mathematically rigorous and has been widely used in the field of UQ, to quantify the uncertainty of three most commonly used constitutive models in CPFEM, namely phenomenological models (with and without twinning), and dislocation-density-based constitutive models, for three different types of crystal structures, namely face-centered cubic (fcc) copper (Cu), body-centered cubic (bcc) tungsten (W), and hexagonal close packing (hcp) magnesium (Mg). Our numerical results not only quantify the uncertainty of these constitutive models in stress-strain curve, but also analyze the global sensitivity of the underlying constitutive parameters with respect to the initial yield behavior, which may be helpful for robust constitutive model calibration works in the future.

36 MATERIALS SCIENCE↗

Discovery of a Third Transiting Planet in the Kepler-47 Circumbinary System

Of the nine confirmed transiting circumbinary planet systems, only Kepler-47 is known to contain more than one planet. Kepler-47 b (the “inner planet”) has an orbital period of 49.5 days and a radius of about 3 R {sub ⊕}. Kepler-47 c (the “outer planet”) has an orbital period of 303.2 days and a radius of about 4.7 R {sub ⊕}. Here we report the discovery of a third planet, Kepler-47 d (the “middle planet”), which has an orbital period of 187.4 days and a radius of about 7 R {sub ⊕}. The presence of the middle planet allows us to place much better constraints on the masses of all three planets, where the 1σ ranges are less than 26 M {sub ⊕}, between 7–43 M {sub ⊕}, and between 2–5 M {sub ⊕} for the inner, middle, and outer planets, respectively. The middle and outer planets have low bulk densities, with ρ{sub middle}<0.68 g cm{sup −3} and ρ {sub outer} < 0.26 g cm{sup −3} at the 1σ level. The two outer planets are “tightly packed,” assuming the nominal masses, meaning no other planet could stably orbit between them. All of the orbits have low eccentricities and are nearly coplanar, disfavoring violent scattering scenarios and suggesting gentle migration in the protoplanetary disk.

79 ASTRONOMY AND ASTROPHYSICS↗

Fabrication of Microstripline Wiring for Large Format Transition Edge Sensor Arrays

We have developed a process to integrate microstripline wiring with transition edge sensors (TES). The process includes additional layers for metal-etch stop and dielectric adhesion to enable recovery of parameters achieved in non-microstrip pixel designs. We report on device parameters in close-packed TES arrays achieved with the microstrip process including R(sub n), G, and T(sub c) uniformity. Further, we investigate limits of this method of producing high-density, microstrip wiring including critical current to determine the ultimate scalability of TES arrays with two layers of wiring.

Chervenak, James A.↗

Compositions and Methods for Inhibiting Gene Expressions

A combined packing and assembly method that efficiently packs ribonucleic acid (RNA) into virus like particles (VLPs) has been developed. The VLPs can spontaneously assemble and load RNA in vivo, efficiently packaging specifically designed RNAs at high densities and with high purity. In some embodiments the RNA is capable of interference activity, or is a precursor of a RNA capable of causing interference activity. Compositions and methods for the efficient expression, production and purification of VLP-RNAs are provided. VLP-RNAs can be used for the storage of RNA for long periods, and provide the ability to deliver RNA in stable form that is readily taken up by cells.

Williams, Loren D.↗

Rheological Behaviour, Mechanical Properties and Processability of Biodegradable Polymer Systems for Film Blowing

Films for agricultural or packaging applications are typically made of low density polyethylene (LDPE). They are produced through the film blowing process, which requires the use of polymers with suitable rheological properties. Furthermore, the short shelf-life which is often related to many packed products leads to huge amounts of plastic-based wastes. This suggests the use of biodegradable and/or compostable polymers in replacement for traditional ones. To this regard, only few data exist on the rheological properties of biodegradable polymers undergoing film blowing processing. In this work, a detailed investigation on the rheological, mechanical and processability behaviour of some biodegradable polymers (originating from MaterBi{sup ®} and Bioflex{sup ®} commercial groups) was carried out, in order to assess their suitability to industrial-scale film blowing by direct comparison with a traditional non-biodegradable polymer (LDPE). Rheological tests under shear and non-isothermal elongational flow allowed to find out the two most suitable polymer grades. The film blowing production operations at different draw and blow-up ratios (from 2.5 to 3.5) showed that the two samples are suitable for industrial scale operations. Results from tensile and impact tests indicated that the two selected polymers exhibit significantly different mechanical properties (up to 10–15%).

36 MATERIALS SCIENCE↗

Adsorption and self-assembled structures of sexithiophene on the Si(111)-√(3)×√(3)-Ag surface

The adsorption and self-assembled structures of α-sexithiophene (α-6T) have been investigated on a Si(111)-Ag surface using scanning tunneling microscopy (STM), low-energy electron diffraction, and density functional theory calculations. The adsorbed α-6T molecules are arranged into unidirectional molecular rows with a side-by-side orientation. The molecular rows reveal three kinds of appearances in the filled-state STM images, which reflect the distinct adsorption sites. From tunneling spectroscopy, we find that the filled-state STM images of α-6T should be influenced by the surface states of Si(111)-Ag. At one monolayer coverage, sequentially ordering of the triple molecular rows results in the close-packed arrangement of the α-6T overlayer.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Characterization of ceramic fuel powder packing fractions to support INFLUX

Triply periodic minimal surface (TPMS)-based structures show marked potential in novel nuclear reactor fuel designs, as their high surface area-to-volume ratio increases the efficiency of heat transfer out of the fuel, enabling safer, more innovative reactor designs. This milestone report addresses the role of dUO 2 powder processing route on the fill behavior of TPMS-based cladding shells to understand and advance the feasibility of manufacturing TPMS-based nuclear fuel forms. dUO 2 powder was processed through either a dry granulation route, varying consolidation pressure, or through milling, varying milling time, milling method and milled size distribution. The lowest tapped bulk densities (TBD), but best powder flowabilities, were obtained when testing unprocessed dUO 2 powder which was prone to self-agglomeration and formed low-density spheroids. The highest TBD and lowest flowabilities were obtained when using powder produced by hammer-milling dUO 2 powder to pass through a 200-mesh sieve, which led to particles with angular morphologies. Powder produced by dry granulation exhibited TBD that varied according to the consolidation pressure used to form the initial pellets and exhibited improved flowabilities when compared to hammer-milled material. Because of the large span of granule sizes formed as well as the irregular shape associated with the granules, a packing fraction of 0.69 was achieved, exceeding the analytical solution for random close packing of mono-sized spheres. TPMS polymer shells were loaded with unprocessed, granulated, and hammer-milled dUO 2 powders, and their qualitative packing behaviors were analyzed using x-ray computed tomography (xCT). TBDs calculated after loading TPMS polymer shells were 10-20% lower when compared to tapped bulk density measurements taken in a glass graduated cylinder, indicating a non-trivial impact on the tapped bulk density of either the TPMS channel size, TPMS channel surface material, powder cohesiveness, or a combination of the two parameters. A metallic zircaloy-4 TPMS shell will be loaded with hammer-milled dUO 2 powder upon receipt of the shell from Oak Ridge National Laboratory (ORNL) and shipped to Idaho National Labs (INL) for subsequent hot isostatic pressing (HIP) densification experiments.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Scalable Solution-Processed Electrolyte Membranes with Optimized Microstructure for High-Performance Protonic Ceramic Electrochemical Cells

Proton-conducting electrochemical cells (PCECs) are promising for efficient hydrogen production, but achieving dense, uniform, thin electrolyte layers remains a key challenge, particularly for scalable fabrication. Here, we present a solution-processed deposition approach with a mechanistically optimized slurry for uniform electrolyte formation. By tailoring particle size distribution, solid loading, and solvent/additive balance, we regulated wetting behavior and evaporation kinetics of the electrolyte slurry to promote homogeneous electrolyte particle packing. These features facilitate tight grain boundary contact and early stage neck growth during sintering, eliminating residual porosity, and improving mechanical integrity. The resulting ∼15 μm thick electrolyte shows high density, strong electrode adhesion, and stable interfaces outperforming the previously reported spray-based fabricated electrolyte by about 31% at 600 °C in FC mode. Single cells deliver 0.962 W cm –2 at 600 °C in fuel cell mode and 1.31 A cm –2 at 1.3 V in electrolysis mode, maintaining robust performance over 100 h with negligible degradation (≤0.02% h –1 ) in each mode. Scale-up to 2.5 cm diameter substrates confirmed reproducible densification and geometric stability. This work demonstrates a cost-effective, scalable route where control over particle-fluid interactions and drying dynamics enables a superior electrolyte microstructure and high PCEC performance.

dense microstructure↗

Atomic-Scale Imaging Reveals Polar-π Interactions in Two-Dimensional Molecular Superlattices

Controlling coassembly of synthetic oligomers into binary superlattices at the atomic level is challenging. Here, we report a strategy for programming polar-π interactions in oligomeric peptoids, a class of sequence-defined peptidomimetics, facilitating the formation of homogeneous two-dimensional (2D) superlattices. N-2-phenylethyl and N-(2-perfluorophenyl)ethyl side chains, similar in size, but with contrasting electrostatic characteristics, were introduced at defined sequence positions to generate favorable dipolar aromatic interactions. The resulting nanosheets exhibit different crystal motifs depending on the side chain interactions: systems containing only one type of aromatic side chain form a parallel V-shaped motif driven by π-π interactions, whereas a combination of both types of aromatic side chains, either within one backbone or through the coassembly of two distinct peptoids, adopt an antiparallel V-shaped superlattice with higher thermal stability, driven by polar-π interactions. Cryogenic transmission electron microscopy directly resolved the packing arrangement of perfluorophenyl and phenyl rings in individual nanosheet superlattices, confirming that intermolecular polar-π interaction dominates the superlattice motifs and increases lattice stability. Molecular dynamics simulations and density functional theory calculations further substantiate the energetic favorability of polar-π interactions over π-π interactions, rationalizing the formation of homogeneous superlattices with enhanced thermal stability. Our discoveries establish a design principle for binary coassembly using sequence-defined oligomers, which enables control over unit cell geometry, lattice stability, and molecular registration through aromatic side chain polarization and sequence control. This ability to program atomic-scale binary superlattices opens new avenues for designing functional 2D soft materials.

Lee, Yen Jea [Lawrence Berkeley National Laborator↗

CoP as an Acid-Stable Active Electrocatalyst for the Hydrogen-Evolution Reaction: Electrochemical Synthesis, Interfacial Characterization and Performance Evaluation

Films of CoP have been electrochemically synthesized, characterized, and evaluated for performance as a catalyst for the hydrogen-evolution reaction (HER). The film was synthesized by cathodic deposition from a boric acid solution of Co 2+ and H 2 PO 2 – on copper substrates followed by operando remediation of exogenous contaminants. The films were characterized structurally and compositionally by scanning-electron microscopy, energy-dispersive X-ray spectroscopy, X-ray photoelectron spectroscopy, and Raman spectrophotometry. The catalytic activity was evaluated by cyclic voltammetry and chronopotentiometry. Surface characterization prior to electrocatalysis indicated that the film consisted of micrometer-sized spherical clusters located randomly and loosely on a slightly roughened surface. The composition of both the clusters and surface consisted of cobalt in the metallic, phosphide, and amorphous-oxide forms (CoO·Co 2 O 3 ) and of phosphorus as phosphide and orthophosphate. The orthophosphate species, produced by air-oxidation, were eliminated upon HER electrocatalysis in sulfuric acid. The operando film purification yielded a functional electrocatalyst with a Co:P stoichiometric ratio of 1:1. After the HER, the surface was densely packed with micrometer-sized, mesa-like particles whose tops were flat and smooth. The CoP eletrodeposit exhibited an 85 mV overvoltage (η) for the HER at a current density of 10 mA cm –2 and was stable under operation in highly acidic solution, with an increase in η of 18 mV after 24 h of continuous operation. In conclusion, the comparative HER catalytic performance of CoP, film or nanoparticles, is as follows: ηPt < ηCoP film = ηCoP NP, ηNi 2 P < ηCoSe 2 < ηMoS 2 < ηMoSe 2 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

NEUTRONICS STUDIES OF URANIUM-BASED FULLY CERAMIC MICRO-ENCAPSULATED FUEL FOR PWRs

This study evaluates the core neutronics and fuel cycle characteristics that result from employing uranium-based fully ceramic micro-encapsulated (FCM) fuel in a pressurized water reactor (PWR). Specific PWR bundle designs with FCM fuel have been developed, which by virtue of their TRISO particle based elements, are expected to safely reach higher fuel burnups while also increasing the tolerance to fuel failures. The SCALE 6.1 code package, developed and maintained at ORNL, was the primary software employed to model these designs. Analysis was performed using the SCALE double-heterogeneous (DH) fuel modeling capabilities. For cases evaluated with the NESTLE full-core three-dimensional nodal simulator, because the feature to perform DH lattice physics branches with the SCALE/TRITON sequence is not yet available, the Reactivity-Equivalent Physical Transformation (RPT) method was used as workaround to support the full core analyses. As part of the fuel assembly design evaluations, fresh feed lattices were modeled to analyze the within-assembly pin power peaking. Also, a color-set array of assemblies was constructed to evaluate power peaking and power sharing between a once-burned and a fresh feed assembly. In addition, a parametric study was performed by varying the various TRISO particle design features; such as kernel diameter, coating layer thicknesses, and packing fractions. Also, other features such as the selection of matrix material (SiC, Zirconium) and fuel rod dimensions were perturbed. After evaluating different uranium-based fuels, the higher physical density of uranium mononitride (UN) proved to be favorable, as the parametric studies showed that the FCM particle fuel design will need roughly 12% additional fissile material in comparison to that of a standard UO2 rod in order to match the lifetime of an 18-month PWR cycle. Neutronically, the FCM fuel designs evaluated maintain acceptable design features in the areas of fuel lifetime, temperature coefficients of reactivity, as well as pin cell and assembly peaking factors. Key Words: FCM, TRISO, Uranium Mononitride, PWR

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Neutronics studies of uranium-based fully ceramic micro-encapsulated fuel for PWRs

This study evaluates the core neutronics and fuel cycle characteristics using uranium-based fully ceramic micro-encapsulated (FCM) fuel in a pressurized water reactor (PWR). Specific PWR assembly designs with FCM fuel have been developed, which by virtue of their TRISO particle-based elements are expected to achieve higher fuel burnups while also increasing the tolerance to fuel failures. The SCALE 6.1 code package, developed and maintained at ORNL, was the primary software used to model the assembly designs. Analysis was performed using the SCALE double-heterogeneous (DH) fuel modeling capabilities; however, the Reactivity-Equivalent Physical Transformation (RPT) method was used for lattice calculations due to the long run times associated with the SCALE DH capability. In order to understand the impact on reactivity and reactor operating cycle length, a parametric study was performed by varying TRISO particle design features, such as kernel diameter, coating layer thicknesses, and packing fraction. Also, other features such as the selection of matrix material (SiC, zirconium) and fuel rod dimensions were studied. After evaluating different uranium-based fuels, the higher compound density of uranium mononitride (UN) proved to be favorable, as the parametric studies showed that the FCM particle fuel design will need roughly 12% additional fissile material in comparison to that of a standard UO{sub 2} rod in order to match the lifetime of an 18-month PWR cycle. Neutronically, the FCM fuel designs evaluated maintain acceptable design features in the areas of fuel lifetime and temperature coefficients of reactivity, as well as pin cell and assembly peaking factors. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Packing Structure of Poly(3-hexylthiophene) Crystal: Ab Initio and Molecular Dynamics Studies

We present a theoretical study of the stacking properties of poly(3-hexylthiophene) (P3HT) and its effect on the electronic and transport properties. Our study is based on ab initio density functional calculations including van der Waals interactions and molecular dynamics simulations. Our calculations provide detailed information of the atomic structures and the formation mechanisms of the particular stacking structures. We found the most stable stacking structure produces a relatively small hole effective mass in the stacking direction, which allows large interchain mobility.

Chemistry↗

Assembling Bare Au Nanoparticles at Positively Charged Templates

In-situ X-ray reflectivity (XRR) and grazing incidence X-ray small-angle scattering (GISAXS) reveal that unfunctionalized (bare) gold nanoparticles (AuNP) spontaneously adsorb to a cationic lipid template formed by a Langmuir monolayer of DPTAP (1,2-dihexadecanoyl-3-trimethylammonium-propane) at vapor/aqueous interfaces. Analysis of the XRR yields the electron density profile across the chargedinterfaces along the surface normal showing the AuNPs assemble with vertical thickness comparable to the particle size. The GISAXS analysis indicates that the adsorbed mono-particle layer exhibits shortrange in-plane correlations. By contrast, single-stranded DNA-functionalized AuNPs, while attracted to the positively charged surface (more efficiently with the addition of salt to the solution), display less in-plane regular packing compared to bare AuNPs.

Wang, Wenjie↗

First-principles study on the mechanical and thermodynamic properties of MoNbTaTiW

Refractory high-entropy alloys (RHEAs) are emerging as new materials for high temperature structural applications because of their stable mechanical and thermal properties at temperatures higher than 2273 K. In this study, the mechanical properties of MoNbTaTiW REDEA are examined by applying calculations based on first-principles density functional theory (DFT) and using a large unit cell with 100 randomized atoms. The phase calculation of MoNbTaTiW with CALPHAD method shows the existence of a stable body-centered cubic structure at a high temperature and a hexagonal closely packed phase at a low temperature. The predicted phase, shear modulus, Young’s modulus, Poisson’s ratio, and hardness values are consistent with available experimental results. The linear thermal expansion coefficient, vibrational entropy, and vibrational heat capacity of MoNbTaTiW RHEA are investigated in accordance with Debye-Grüneisen theory. These results may provide a basis for future research related to the application of RHEAs.

36 MATERIALS SCIENCE↗

High pressure thermoelasticity and sound velocities of Fe-Ni-Si alloys

The Earth's iron-dominant core is known to contain nickel from cosmochemical analysis and some amount of light elements from geophysical constraints on density and seismic wave velocities. Although there have been several studies to constrain thermoelastic properties of iron-alloys, there has been no systematic study on the effects of nickel and light elements on properties of iron using the same experimental methods and data analysis approach. We conducted nuclear resonant inelastic X-ray scattering and X-ray diffraction experiments on body-centered cubic and hexagonal close-packed (hcp) Fe 0.91 Ni 0.09 and Fe 0.8 Ni 0.1 Si 0.1 up to 104 GPa and 86 GPa, respectively, and compare to similar measurements conducted on hcp-Fe up to 171 GPa. Specifically, we determine the Debye sound velocity from the low-energy transfer region of the (partial) phonon density of states (DOS) using the equation of state determined for each material and a new approach which utilizes information criteria and probability distributions. Nickel decreases the shear velocity of iron, while 10 at% Si has little to no effect on the shear velocity of Fe 0.91 Ni 0.09 . We observe that the shape of the phonon DOS of these alloys remains similar with increasing pressure. In the measured compression range, we therefore apply a generalized scaling law to describe the volume dependence of the phonon DOS and find that the vibrational Grüneisen parameters of hcp-Fe 0.91 Ni 0.09 are nearly indistinguishable from those hcp-Fe and those for Fe 0.8 Ni 0.1 Si 0.1 trend lower. From the vibrational free energy, we constrain the harmonic vibrational component of thermal pressure, which shows a significant positive deviation from theoretical calculations of hcp-Fe at pressures and temperatures of Earth's core. Collectively, our results demonstrate that the effects of nickel should be considered when modeling iron-rich planetary cores.

36 MATERIALS SCIENCE↗