Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “model data volumes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44
All sourcesNASA NTRSDOE OSTI
NASA NTRS2013

Ablator Response Model Development: From Flight Data Back to Fundamental Experiments

The successful Mars atmospheric entry by the Mars Science Laboratory (MSL-Curiosity) combined with the success of the Earth atmospheric entry by the Stardust capsule have established PICA as a major Thermal Protection Systems (TPS) material. We expect that this class of materials will be on the short list selected by NASA for any atmospheric entry missions and that it will be the lead of that list of materials in any planning, feasibility studies or flight readiness studies. In addition to NASAs successes, the Dragon capsule, the successful commercial space vehicle built by SpaceX, uses PICA-X, while the European Space Agency is considering ASTERM for its exploration missions that involve atmospheric entries, both of these materials are of the same family as PICA. In the talk, a high-fidelity model will be detailed and discussed. The model tracks the chemical composition of the gases produced during pyrolysis. As in the conventional models, it uses equilibrium chemistry to determine the recession rate at high temperatures but switches to in-volume finite-rate ablation for lower temperatures. It also tracks the time evolution of the porosity of the material. Progress in implementing this high-fidelity model in a code will be presented. In addition, a set of basic experimental data being supported for model validation will be summarized. The validation process for the model development will be discussed. Preliminary results will be presented for a case where detailed pyrolysis product chemistry is computed. Finally, a wish list for a set of validation experiments will be outlined and discussed.

Mansour, Nagi N.↗
NASA NTRS1981

Applications systems verification and transfer project. Volume 6: Operational applications of satellite snow-cover observations NOAA/NESS support study

Geostationary and polar orbiting satellite data from the National Oceanic and Atmospheric Administration were used to operationally provide field hydrologists with basin snowcover percentages for inclusion in runoff models. Data reduction is accomplished thru the use of optical rectification devices and electronic color density slicers. Over two thousand satellite-derived snow maps covering 30 different basins in the western United States were provided to users. Plans for improving snowmapping techniques on computer interactive systems and by all-digital analysis are presented. A description of the newest generation of NOAA polar orbiters, TIROS-N, and its potential for snowmapping is reviewed. Snowcover percentages for all basins determined between November 1974 and July 1978 are presented in tabular format.

Schneider, S. R.↗
NASA NTRS1980

Cratering flow fields - Implications for the excavation and transient expansion stages of crater formation

Theoretical depths, volumes of excavation, hinge radii, ejection angles and transient structural rim uplifts are calculated, for comparison with experimental and field data from impact and explosion craters, by means of a Maxwell Z-model cratering flow field originating at non-zero depths-of-burst. It is found that the formation of a hinge, about which the coherent ejecta flap rotates at the rim of the transient crater, divides material in the flow field into ejected and downward and outward-driven portions. Ejected material originates from an excavation cavity whose geometry is distinct from that of the transient crater. The shallow depths of excavation both observed in impact and explosion craters and predicted by the Z-model flow fields imply that thickness estimates of such lunar geologic units as the maria basalts, which are determined by assuming that excavation depths are similar to (1) final or (2) transient crater depths, must be reduced by factors of two to three respectively. It is concluded that lunar basin excavation cavities exhibit proportional growth, and have maximum depths of excavation near 0.1 the diameter of the basin transient crater.

Croft, S. K.↗
NASA NTRS1984

Hoop/Column Antenna: RF Verification Model. Volume 1: Test Results

As part of the Large Space System Technology Program, this report, in two volumes, presents the theoretical and experimental results of the RF characteristic of a hoop/column, quad aperture antenna using an RF verification model. To satisfy the primary purposes of the model it provides experimental pattern data for the quad aperture configuration at different reflector edge illumination levels, from which the geometry and edge effects can be assessed, and provides experimental data which can be compared with calculations using various theoretical reflector scattering formulae. It also experimentally determines the effects upon secondary patterns of scale model quartz cables, as used in the hoop/column design, upon secondary patterns in order to assess the importance of developing a scattering theory to predict such effects. In addition, this report contains a comprehensive theoretical study and the experimental pattern results of quad aperture antenna feeds, a discussion of the fundamental affect of parasitic side lobes, their amplitude, and location in space.

Croswell, W. F.↗
NASA NTRS1991

Transonic and supersonic Euler computations of vortex-dominated flow fields about a generic fighter

Flow fields about a generic flighter model were computed using FL057, a 3-D, finite volume Euler code. Computed pressure coefficients, forces, and moments at several Mach numbers (0.6, 0.8, 1.2, 1.4, and 1.6) are compared with wind tunnel data over a wide range of angles of attack in order to determine the applicability of the code for the analysis of fighter configurations. Two configurations were studied, a wing-body and a wing-body-chine. FL057 predicted pressure distributions, forces, and moments well at low angles of attack, at which the flow was fully attached. The FL057 predictions were also accurate for some test conditions once the leading edge vortex became well established. At the subsonic speeds, FL057 predicted vortex breakdown earlier than that seen in the experimental results. Placing the chine on the forebody delayed the onset of bursting and improved the correlation between numerical and experimental data at the subsonic conditions.

Goodsell, Aga M.↗
NASA NTRS1995

SRM Internal Flow Tests and Computational Fluid Dynamic Analysis: Cold Flow Analyses and CFD Analysis Capability Development - Volume 4

An evaluation of the effect of model inlet air temperature drift during a test run was performed to aid in the decision on the need for and/or the schedule for including heaters in the SRMAFTE. The Sverdrup acceptance test data was used to determine the drift in air temperature during runs over the entire range of delivered flow rates and pressures. The effect of this temperature drift on the model Reynolds number was also calculated. It was concluded from this study that a 2% change in absolute temperature during a test run could be adequately accounted for by the data analysis program. A handout package of these results was prepared and presented to ED35 management.

Source record↗
NASA NTRS2002

Probabilistic Life and Reliability Analysis of Model Gas Turbine Disk

In 1939, W. Weibull developed what is now commonly known as the "Weibull Distribution Function" primarily to determine the cumulative strength distribution of small sample sizes of elemental fracture specimens. In 1947, G. Lundberg and A. Palmgren, using the Weibull Distribution Function developed a probabilistic lifing protocol for ball and roller bearings. In 1987, E. V. Zaretsky using the Weibull Distribution Function modified the Lundberg and Palmgren approach to life prediction. His method incorporates the results of coupon fatigue testing to compute the life of elemental stress volumes of a complex machine element to predict system life and reliability. This paper examines the Zaretsky method to determine the probabilistic life and reliability of a model gas turbine disk using experimental data from coupon specimens. The predicted results are compared to experimental disk endurance data.

Holland, Frederic A.↗
NASA NTRS2004

Grid Enabled Geospatial Catalogue Web Service

Geospatial Catalogue Web Service is a vital service for sharing and interoperating volumes of distributed heterogeneous geospatial resources, such as data, services, applications, and their replicas over the web. Based on the Grid technology and the Open Geospatial Consortium (0GC) s Catalogue Service - Web Information Model, this paper proposes a new information model for Geospatial Catalogue Web Service, named as GCWS which can securely provides Grid-based publishing, managing and querying geospatial data and services, and the transparent access to the replica data and related services under the Grid environment. This information model integrates the information model of the Grid Replica Location Service (RLS)/Monitoring & Discovery Service (MDS) with the information model of OGC Catalogue Service (CSW), and refers to the geospatial data metadata standards from IS0 19115, FGDC and NASA EOS Core System and service metadata standards from IS0 191 19 to extend itself for expressing geospatial resources. Using GCWS, any valid geospatial user, who belongs to an authorized Virtual Organization (VO), can securely publish and manage geospatial resources, especially query on-demand data in the virtual community and get back it through the data-related services which provide functions such as subsetting, reformatting, reprojection etc. This work facilitates the geospatial resources sharing and interoperating under the Grid environment, and implements geospatial resources Grid enabled and Grid technologies geospatial enabled. It 2!so makes researcher to focus on science, 2nd not cn issues with computing ability, data locztic~, processir,g and management. GCWS also is a key component for workflow-based virtual geospatial data producing.

Chen, Ai-Jun↗
NASA NTRS2012

Simulation of a Cold Gas Thruster System and Test Data Correlation

During developmental testing of the Ascent Abort 1 (AA-1) cold gas thruster system, unexpected behavior was detected. Upon further review the design as it existed may not have met the requirements. To determine the best approach for modifying the design, the system was modeled with a dynamic fluid analysis tool (EASY5). The system model consisted of the nitrogen storage tank, pressure regulator, thruster valve, nozzle, and the associated interconnecting line lengths. The regulator and thruster valves were modeled using a combination of the fluid and mechanical modules available in EASY5. The simulation results were then compared against actual system test data. The simulation results exhibited behaviors similar to the test results, such as the pressure regulators response to thruster firings. Potential design solutions were investigated using the analytical model parameters, including increasing the volume downstream of the regulator and increasing the orifice area. Both were shown to improve the regulator response.

Hauser, Daniel M.↗
NASA NTRS2014

Earth Science Data Analysis in the Era of Big Data

Anyone with even a cursory interest in information technology cannot help but recognize that "Big Data" is one of the most fashionable catchphrases of late. From accurate voice and facial recognition, language translation, and airfare prediction and comparison, to monitoring the real-time spread of flu, Big Data techniques have been applied to many seemingly intractable problems with spectacular successes. They appear to be a rewarding way to approach many currently unsolved problems. Few fields of research can claim a longer history with problems involving voluminous data than Earth science. The problems we are facing today with our Earth's future are more complex and carry potentially graver consequences than the examples given above. How has our climate changed? Beside natural variations, what is causing these changes? What are the processes involved and through what mechanisms are these connected? How will they impact life as we know it? In attempts to answer these questions, we have resorted to observations and numerical simulations with ever-finer resolutions, which continue to feed the "data deluge." Plausibly, many Earth scientists are wondering: How will Big Data technologies benefit Earth science research? As an example from the global water cycle, one subdomain among many in Earth science, how would these technologies accelerate the analysis of decades of global precipitation to ascertain the changes in its characteristics, to validate these changes in predictive climate models, and to infer the implications of these changes to ecosystems, economies, and public health? Earth science researchers need a viable way to harness the power of Big Data technologies to analyze large volumes and varieties of data with velocity and veracity. Beyond providing speedy data analysis capabilities, Big Data technologies can also play a crucial, albeit indirect, role in boosting scientific productivity by facilitating effective collaboration within an analysis environment. To illustrate the effects of combining a Big Data technology with an effective means of collaboration, we relate the (fictitious) experience of an early-career Earth science researcher a few years beyond the present, interlaced and contrasted with reminiscences of its recent past (i.e., the present).

Kuo, K.-S.↗
NASA NTRS2015

Demonstration of Hybrid Multilayer Insulation for Fixed Thickness Applications

Once on orbit, high performing insulation systems for cryogenic systems need just as good radiation (optical) properties as conduction properties. This requires the use of radiation shields with low conductivity spacers in between. By varying the height and cross-sectional area of the spacers between the radiation shields, the relative radiation and conduction heat transfers can be manipulated. However, in most systems, there is a fixed thickness or volume allocated to the insulation. In order to understand how various combinations of different multilayer insulation (MLI) systems work together and further validate thermal models of such a hybrid MLI set up, test data is needed. The MLI systems include combinations of Load Bearing MLI (LB-MLI) and traditional MLI. To further simulate the space launch vehicle case wherein both ambient pressure and vacuum environments are addressed, different cold-side thermal insulation substrates were included for select tests.

Cryogenic Fluid Management↗
NASA NTRSDate not supplied

Characterization of Slosh Damping for Ortho-Grid and Iso-Grid Internal Tank Structures

Grid stiffened tank structures such as Ortho-Grid and Iso-Grid are widely used in cryogenic tanks for providing stiffening to the tank while reducing mass, compared to tank walls of constant cross-section. If the structure is internal to the tank, it will positively affect the fluid dynamic behavior of the liquid propellant, in regard to fluid slosh damping. As NASA and commercial companies endeavor to explore the solar system, vehicles will by necessity become more mass efficient, and design margin will be reduced where possible. Therefore, if the damping characteristics of the Ortho-Grid and Iso-Grid structure is understood, their positive damping effect can be taken into account in the systems design process. Historically, damping by internal structures has been characterized by rules of thumb and for Ortho-Grid, empirical design tools intended for slosh baffles of much larger cross-section have been used. There is little or no information available to characterize the slosh behavior of Iso-Grid internal structure. Therefore, to take advantage of these structures for their positive damping effects, there is much need for obtaining additional data and tools to characterize them. Recently, the NASA Marshall Space Flight Center conducted both sub-scale testing and computational fluid dynamics (CFD) simulations of slosh damping for Ortho-Grid and Iso-Grid tanks for cylindrical tanks containing water. Enhanced grid meshing techniques were applied to the geometrically detailed and complex Ortho-Grid and Iso-Grid structures. The Loci-STREAM CFD program with the Volume of Fluid Method module for tracking and locating the water-air fluid interface was used to conduct the simulations. The CFD simulations were validated with the test data and new empirical models for predicting damping and frequency of Ortho-Grid and Iso-Grid structures were generated.

Douglas G. Westra↗
NASA NTRS2017

Imaging Systems for Size Measurements of Debrisat Fragments

The overall objective of the DebriSat project is to provide data to update existing standard spacecraft breakup models. One of the key sets of parameters used in these models is the physical dimensions of the fragments (i.e., length, average-cross sectional area, and volume). For the DebriSat project, only fragments with at least one dimension greater than 2 mm are collected and processed. Additionally, a significant portion of the fragments recovered from the impact test are needle-like and/or flat plate-like fragments where their heights are almost negligible in comparison to their other dimensions. As a result, two fragment size categories were defined: 2D objects and 3D objects. While measurement systems are commercially available, factors such as measurement rates, system adaptability, size characterization limitations and equipment costs presented significant challenges to the project and a decision was made to develop our own size characterization systems. The size characterization systems consist of two automated image systems, one referred to as the 3D imaging system and the other as the 2D imaging system. Which imaging system to use depends on the classification of the fragment being measured. Both imaging systems utilize point-and-shoot cameras for object image acquisition and create representative point clouds of the fragments. The 3D imaging system utilizes a space-carving algorithm to generate a 3D point cloud, while the 2D imaging system utilizes an edge detection algorithm to generate a 2D point cloud. From the point clouds, the three largest orthogonal dimensions are determined using a convex hull algorithm. For 3D objects, in addition to the three largest orthogonal dimensions, the volume is computed via an alpha-shape algorithm applied to the point clouds. The average cross-sectional area is also computed for 3D objects. Both imaging systems have automated size measurements (image acquisition and image processing) driven by the need to quickly and accurately measure tens of thousands of debris fragments. Moreover, the automated size measurement reduces potential fragment damage/mishandling and ability for accuracy and repeatability. As the fragment characterization progressed, it became evident that the imaging systems had to be revised. For example, an additional view was added to the 2D imaging system to capture the height of the 2D object. This paper presents the DebriSat project's imaging systems and calculation techniques in detail; from design and development to maturation. The experiences and challenges are also shared.

Shiotani, B.↗
NASA NTRS2020

The Role of Declining Snow Cover in the Desiccation of the Great Salt Lake, Utah, using MODIS Data

The Great Salt Lake (GSL) in Utah has been shrinking since the middle of the 19th Century, leading to decreased area and volume, and increased salinity. We use satellite data products from the Terra and Aqua MODerate-resolution Imaging Spectroradiometer (MODIS) and the Landsat-7 and -8 satellites, along with meteorological and streamflow data, and modeled data products to study the relationship between changing snow-cover conditions and the decline of the GSL since 2000 in the context of the historical record of lake levels. The GSL basin includes much of the snow-dominated Wasatch and Uinta mountain ranges to the east of the lake. Snowmelt feeds the Bear, Jordan, and Weber rivers which are the three main rivers that flow into the lake. Snowmelt-timing maps, derived from a new MODIS standard snow-cover product, MOD10A1F, show that snow melted ~9.5 days earlier in the GSL basin during the study period, extending from 2000 – 2018. Air temperatures derived from 26 meteorological stations and surface temperatures measured by the Aqua MODIS land-surface temperature (LST) products, MYD21A1D and MYD21A1N, show trends of increasing temperature of ~0.94°C (a=0.05), and ~2.18°C, respectively, with most of the LST trends in the GSL basin being statistically significant (a=0.05). Increasing air temperatures in the basin have led to less precipitation falling as snow, lower snow depth (by ~34.5 mm (=0.01)) and snow-water equivalent (0.02 mm (a=0.01)), and earlier snowmelt. Also during the study period, Global Land surface Evaporation Amsterdam Model data show evaporation increasing by ~3.2 mm/yr, with trends in much of the basin being statistically significant (a=0.05). Trends calculated from the various products are generally in agreement indicating higher temperatures, greater evaporation, less snowfall and snow-on-the ground, and earlier snowmelt. Earlier snowmelt contributes to increasing evaporative loss from water flowing toward the lake. Furthermore, a lower mountain snowpack and less precipitation falling as snow (versus rain) is associated with lower stream discharge even if overall precipitation stays the same. The surface-water temperature of the GSL also increased over the study period by ~ 0.69°C, according to the MODIS LST data products, and the surface-water elevation of the lake dropped by ~1.7 m between 2000 and 2018 based on United States Geological Survey measurements, and the areal extent of the lake decreased by ~901 km2 as measured using Landsat imagery. Desiccation of the lake is associated with deleterious effects on wildlife, recreational activities, and some local industries. And, importantly, an expanding lake bed can also fuel dust storms that promote dangerous air quality along the Wasatch Front. This work elucidates the key role that satellite remote sensing can play in documenting earlier snowmelt and other changes in the GSL basin that influence the ongoing decline of the Great Salt Lake.

Dorothy K Hall↗
NASA NTRSDate not supplied

Parameterization of Vertical Cloud Distribution from C3M and MERRA Data Using ML Method

Clouds play a key role in regulating the hydrological cycle and the Earth's radiative energy budget. However, global climate models (GCMs) with a horizontal grid spacing on the order of 100 km have limitations in representing sub-grid cloud dynamics with spatial scales on the order of 1 km, leading to potential uncertainties in cloud radiative feedback on the global scale. In our research, we will leverage the capabilities of Deep Machine Learning (DML) methods to construct parameterizations of sub-grid volumetric cloud fraction (VCF), which is the frequency of occurrence on a grid volume accumulated in the horizontal and vertical directions. Our investigation delves into the intricate relationship between VCF obtained from the NASA CALIPSO-CloudSat-CERES-MODIS (CCCM) satellite observation data and 3-D MERRA-2 reanalysis meteorological profiling data (e.g., wind, relative humidity, temperature). Through a comprehensive one-year data training utilizing the Sequence to Sequence DML method, we have successfully disentangled the complicated cloud formation dynamics across diverse meteorological conditions through a day-to-day analysis framework. Preliminary findings reveal promising statistical agreements in geographical and vertical distributions and seasonal variations of volumetric cloud fraction between ML prediction and satellite measurements. These results underscore the aptitude of our DML model to discern underlying cloud physical processes and accurately represent sub-grid cloud formation dynamics. Additionally, we have also employed trained neural network to analyze uncertainties arising from errors in meteorological data, further enhancing the robustness of our VCF parameterization.

Shan Zeng↗
NASA NTRS1995

Theoretical and experimental models of the diffuse radar backscatter from Mars

The general objective for this work was to develop a theoretically and experimentally consistent explanation for the diffuse component of radar backscatter from Mars. The strength, variability, and wavelength independence of Mars' diffuse backscatter are unique among our Moon and the terrestrial planets. This diffuse backscatter is generally attributed to wavelength-scale surface roughness and to rock clasts within the Martian regolith. Through the combination of theory and experiment, the authors attempted to bound the range of surface characteristics that could produce the observed diffuse backscatter. Through these bounds they gained a limited capability for data inversion. Within this umbrella, specific objectives were: (1) To better define the statistical roughness parameters of Mars' surface so that they are consistent with observed radar backscatter data, and with the physical and chemical characteristics of Mars' surface as inferred from Mariner 9, the Viking probes, and Earth-based spectroscopy; (2) To better understand the partitioning between surface and volume scattering in the Mars regolith; (3) To develop computational models of Mars' radio emission that incorporate frequency dependent, surface and volume scattering.

England, A. W.↗
NASA NTRS1993

Observation of pressure ridges in SAR images of sea ice: Scattering theory and comparison with observations

Ridges and keels (hummocks and bummocks) in sea ice flows are important in sea ice research for both scientific and practical reasons. Sea ice movement and deformation is driven by internal and external stresses on the ice. Ridges and keels play important roles in both cases because they determine the external wind and current stresses via drag coefficients. For example, the drag coefficient over sea ice can vary by a factor of several depending on the fluid mechanical roughness length of the surface. This roughness length is thought to be strongly dependent on the ridge structures present. Thus, variations in ridge and keel structure can cause gradients in external stresses which must be balanced by internal stresses and possibly fracture of the ice. Ridging in sea ice is also a sign of fracture. In a practical sense, large ridges form the biggest impediment to surface travel over the ice or penetration through sea ice by ice-strengthened ships. Ridges also play an important role in the damage caused by sea ice to off-shore structures. Hence, observation and measurement of sea ice ridges is an important component of sea ice remote sensing. The research reported here builds on previous work, estimating the characteristics of ridges and leads in sea ice from SAR images. Our objective is to develop methods for quantitative measurement of sea ice ridges from SAR images. To make further progress, in particular, to estimate ridge height, a scattering model for ridges is needed. Our research approach for a ridge scattering model begins with a survey of the geometrical properties of ridges and a comparison with the characteristics of the surrounding ice. For this purpose we have used airborne optical laser (AOL) data collected during the 1987 Greenland Sea Experiment. These data were used to generate a spatial wavenumber spectrum for height variance for a typical ridge - the typical ridge is the average over 10 large ridges. Our first-order model radar scattering includes both the quasi-specular and Bragg resonant scatter mechanisms. This model is extended to include contributions from volume scatter and scatter from discrete objects. Geometrical characteristics from the AOL survey and model calculations imply that for radar wavelengths and observation geometries that are dominated by the quasi-specular scattering mechanism radar backscatter from a ridge is a measure of peak ridge height. We present scattering model results and compare them with ridges observed during the LEADEX experiment of March-April 1992 when both X, C, and L-band aircraft SAR and the ERS-1 satellite SAR observed a region in the Beaufort Sea near 86 deg N, 10 deg W. Data were also collected documenting ridge characteristics on the surface. The surface data are used to generate a SAR signature via the scattering model described above. The predicted SAR signatures compare well with the SAR observations.

Vesecky, J. F.↗