Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “millimeter wave”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44

High-gain step-profiled integrated diagonal horn-antennas

A new step-profiled integrated-horn antenna is proposed. The antenna allows gains in the range of 17-20 dB to be achieved using standard (100) silicon wafers. The antenna is diagonally fed and exhibits very good circular symmetry within the 10-dB beamwidth. It has a fundamental Gaussian coupling efficiency of 83 percent. It is demonstrated that the profiled antenna has a radiation pattern similar to that of its smooth envelope horn, provided that the discontinuity between successive wafers does not exceed 0.15 lambda. The integrated stepped-profile horn performs much better than a corresponding smooth 70 deg flare-angle integrated horn of the same aperture size. The integrated step-profile horn is very well-suited for radio-astonomical and remote-sensing millimeter-wave imaging arrays requiring a large number of focal-plane elements.

Eleftheriades, George V.↗

Nb/Al-Al2O3/Nb junctions with inductive tuning elements for a very low noise 205-250 GHz heterodyne receiver

The superconductor-insulator-superconductor (SIS) junction is the most sensitive nonlinear element for millimeter-wave heterodyne detection. An Nb/Al-Al203/Nb junction fabrication process has been developed which allows the use of planar tuning circuits integrated with the junctions. These tuning elements permit the use of junctions with relatively large areas and small current densities with excellent results. Recent measurements have yielded a double sideband receiver noise temperature less than 50 K from 205 to 240 GHz and 44 K at 230 GHz. This Nb/Al-Al203/Nb trilayer technology is also being extended to the fabrication of sub-square-micron area planar junctions for submillimeter-wavelengths.

Lichtenberger, Arthur W.↗

The structure, stability, and global distribution of Io's atmosphere

The paper reports on high-resolution millimeter-wave spectroscopic observations of Io carried out in 1990 and 1991 which allowed the first unambiguous ground-based detection of SO2 in Io's atmosphere. A reassessment of the IRIS-Voyager observations of the nu3 band of SO2 is presented, and it is shown that non-LTE effects are important in the formation of this band. It is thus concluded that the global SO2 atmosphere observed from earth has characteristics (pressure, temperature) similar to those observed at Loki by Voyager. The paper concludes with a simple thermal model of Io's lower atmosphere and a discussion of new upper limits that can be placed on the presence of H2S, SO, and CO in Io's atmosphere.

Lellouch, Emmanuel↗

A high temperature superconductivity communications flight experiment

The proposed high temperature superconductivity (HTSC) millimeter-wave communications flight experiment from the payload bay of the Space Shuttle Orbiter to the Advanced Communications Technology Satellite (ACTS) in geosynchronous orbit is described. The experiment will use a Ka-band HTSC phased array antenna and front-end electronics to receive a downlink communications signal from the ACTS. The discussion covers the system configuration, a description of the ground equipment, the spacecraft receiver, link performance, thermal loading, and the superconducting antenna array.

Ngo, P.↗

Submillimeter sources for radiometry using high power Indium Phosphide Gunn diode oscillators

A study aimed at developing high frequency millimeter wave and submillimeter wave local oscillator sources in the 60-600 GHz range was conducted. Sources involved both fundamental and harmonic-extraction type Indium Phosphide Gunn diode oscillators as well as varactor multipliers. In particular, a high power balanced-doubler using varactor diodes was developed for 166 GHz. It is capable of handling 100 mW input power, and typically produced 25 mW output power. A high frequency tripler operating at 500 GHz output frequency was also developed and cascaded with the balanced-doubler. A dual-diode InP Gunn diode combiner was used to pump this cascaded multiplier to produce on the order of 0.5 mW at 500 GHz. In addition, considerable development and characterization work on InP Gunn diode oscillators was carried out. Design data and operating characteristics were documented for a very wide range of oscillators. The reliability of InP devices was examined, and packaging techniques to enhance the performance were analyzed. A theoretical study of a new class of high power multipliers was conducted for future applications. The sources developed here find many commercial applications for radio astronomy and remote sensing.

Deo, Naresh C.↗

Communications system evolutionary scenarios for Martian SEI support

In the Space Exploration Initiative (SEI) mission scenarios, expanding human presence is the primary driver for high data rate Mars-Earth communications. To support an expanding human presence, the data rate requirement will be gradual, following the phased implementation over time of the evolving SEI mission. Similarly, the growth and evolution of the space communications infrastructure to serve this requirement will also be gradual to efficiently exploit the useful life of the installed communications infrastructure and to ensure backward compatibility with long-term users. In work conducted over the past year, a number of alternatives for supporting high data rate Mars-Earth communications have been analyzed with respect to their compatibility with gradual evolution of the space communications infrastructure. The alternatives include RF, millimeter wave (MMW), and optical implementations, and incorporate both surface and space-based relay terminals in the Mars and Earth regions. Each alternative is evaluated with respect to its ability to efficiently meet a projected growth in data rate over time, its technology readiness, and its capability to satisfy the key conditions and constraints imposed by evolutionary transition. As a result of this analysis, a set of attractive alternative communications architectures have been identified and described, and a road map is developed that illustrates the most rational and beneficial evolutionary paths for the communications infrastructure.

Kwong, Paulman W.↗

An investigation of air transportation technology at the Massachusetts Institute of Technology, 1991-1992

There are two completed projects and five new or continuing research activities under the sponsorship of the FAA/NASA Joint University Program as the 1991-92 period ends. A brief summary of some of the continuing research projects is provided. The active research projects are: (1) extensions for the FASA (Final Approach Spacing Advisory) System; (2) radar tracking around a turn; (3) impact of advanced technologies of single pilot IFR operations; (4) system and human limitations in millimeter wave and infrared synthetic vision systems; and (5) differences in party line information usage by operational user groups.

Simpson, Robert W.↗

RLE progress report no. 133, 1 January - 31 December 1990

Activities of the Research Laboratory of Electronics at MIT are summarized. NASA-sponsored research in the area of synthetic aperture radar image interpretation and simulation is described. Other government-sponsored and industry-sponsored studies are also described which address the following topics: microwave and millimeter wave integrated circuits, high-speed integrated circuit interconnects, Instrument Landing System/Microwave Landing System frequency management assessment, and superconducting electronics.

Allen, Jonathan↗

ETS-5, ETS-6, and COMETS projects in Japan

Three satellite communication projects now in progress in Japan are described. The first is a project to establish a telecommunication network for tele-education, TV conference, and tele-medicine in the Asia-Pacific region by using the Japan's Engineering Test Satellite-5 (ETS-5). The second is a project of the ETS-6 satellite, to be launched in 1993, for inter-satellite communication, mobile and fixed communication, and millimeter wave personal communication experiments. The third is a project of the Communications and Broadcasting Engineering Test Satellite (COMETS), to be launched in 1997, for advanced mobile satellite communication, inter-satellite link, and advanced broadcasting experiments at higher frequencies.

Iida, Takashi↗

Quasi-optical antenna-mixer-array design for terahertz frequencies

A new quasi-optical antenna-mixer-array design for terahertz frequencies is presented. In the design, antenna and mixer are combined into an entity, based on the technology in which millimeter-wave horn antenna arrays have been fabricated in silicon wafers. It consists of a set of forward- and backward-looking horns made with a set of silicon wafers. The front side is used to receive incoming signal, and the back side is used to feed local oscillator signal. Intermediate frequency is led out from the side of the array. Signal received by the horn array is picked up by antenna probes suspended on thin silicon-oxynitride membranes inside the horns. Mixer diodes will be located on the membranes inside the horns. Modeling of such an antenna-mixer-array design is done on a scaled model at microwave frequencies. The impedance matching, RF and LO isolation, and patterns of the array have been tested and analyzed.

Guo, Yong↗

Embedding impedance approximations in the analysis of SIS mixers

Future millimeter-wave radio astronomy instruments will use arrays of many SIS receivers, either as focal plane arrays on individual radio telescopes, or as individual receivers on the many antennas of radio interferometers. Such applications will require broadband integrated mixers without mechanical tuners. To produce such mixers, it will be necessary to improve present mixer design techniques, most of which use the three-frequency approximation to Tucker's quantum mixer theory. This paper examines the adequacy of three approximations to Tucker's theory: (1) the usual three-frequency approximation which assumes a sinusoidal LO voltage at the junction, and a short-circuit at all frequencies above the upper sideband; (2) a five-frequency approximation which allows two LO voltage harmonics and five small-signal sidebands; and (3) a quasi five-frequency approximation in which five small-signal sidebands are allowed, but the LO voltage is assumed sinusoidal. These are compared with a full harmonic-Newton solution of Tucker's equations, including eight LO harmonics and their corresponding sidebands, for realistic SIS mixer circuits. It is shown that the accuracy of the three approximations depends strongly on the value of omega R(sub N)C for the SIS junctions used. For large omega R(sub N)C, all three approximations approach the eight-harmonic solution. For omega R(sub N)C values in the range 0.5 to 10, the range of most practical interest, the quasi five-frequency approximation is a considerable improvement over the three-frequency approximation, and should be suitable for much design work. For the realistic SIS mixers considered here, the five-frequency approximation gives results very close to those of the eight-harmonic solution. Use of these approximations, where appropriate, considerably reduces the computational effort needed to analyze an SIS mixer, and allows the design and optimization of mixers using a personal computer.

Kerr, A. R.↗

Planar doped barrier subharmonic mixers

The Planar Doped Barrier (PDB) diode is a device consisting of a p(+) doping spike between two intrinsic layers and n(+) ohmic contacts. This device has the advantages of controllable barrier height, diode capacitance and forward to reverse current ratio. A symmetrically designed PDB has an anti-symmetric current vs. voltage characteristic and is ideal for use as millimeter wave subharmonic mixers. We have fabricated such devices with barrier heights of 0.3, 0.5 and 0.7 volts from GaAs and InGaAs using a multijunction honeycomb structure with junction diameters between one and ten microns. Initial RF measurements are encouraging. The 0.7 volt barrier height 4 micron GaAs devices were tested as subharmonic mixers at 202 GHz with an IF frequency of 1 GHz and had 18 dB of conversion loss. The estimated mismatch loss was 7 dB and was due to higher diode capacitance. The LO frequency was 100.5 GHz and the pump power was 8 mW.

Lee, T. H.↗

Earth to space power beaming: A new NASA technology initiative

Laser power beaming from the Earth's surface is an innovative and potentially cost-effective option for reliably providing electrical power for applications such as space transportation, Earth-orbiting satellites, and lunar development. The maturation of laser power beaming technology can support low power applications such as upgraded conventional communications satellites in the present decade. Power beaming systems to support extensive lunar base operations that may consume extremely large amounts of power can be implemented early in the 21st century. The synergistic advantages of high-thrust, high specific-impulse electric propulsion may make enhanced, low cost space logistics an area of unique significance for laser power beaming. Economic forces will continue as a driving factor in the selection of major system elements for both commercial applications as well as the avant-garde national space missions envisioned for the 21st century. As a result, the implementation of laser power beaming systems will only take place if they can demonstrate clear economic benefits without sacrificing performance, personnel safety, or the environment. Similarly, the development activities that are a necessary precursor to any operational system will take place only if key industry and government leaders perceive laser power beaming systems as an achievable goal with realistic payoffs in comparison to competing energy options. This paper summarizes NASA's current research to evaluate laser power beaming systems as they apply to applications of greatest interest, and it includes a summary of the current laser power beaming program within the NASA Headquarters Office of Aeronautics and Space Technology. This research effort will quantify some key technical certainties and uncertainties pertaining to laser power beaming systems appropriate for space applications as well as establish a path of development that includes maturation of key technology components for reliable laser and millimeter wave power beaming systems during the 1990's. The program is known as 'SELENE', an acronym for Space Laser Energy.

Rather, John D. G.↗

94 GHz integrated horn monopulse antennas

A monolithic azimuthal monopulse antenna for 94 GHz applications has been developed. The structure consists of a single dipole suspended in one plane of an integrated horn cavity to obtain the sum pattern, and an antiparallel pair of dipoles suspended in a different plane of the same horn cavity to achieve the difference pattern. Pattern measurements of microwave models and on the millimeter-wave antennas show good agreement with theory and exhibit symmetry with a sharp -30 dB null at broadside for the difference antenna. Microwave model measurements show input impedances close to 50 Ohms, with greater than -25 dB isolation between sum and difference antennas across a 10 percent bandwidth.

Ling, Curtis C.↗

A wavefront compensation approach to segmented mirror figure control

We consider the 'figure-control' problem for a spaceborn sub-millimeter wave telescope, the Precision Segmented Reflector Project Focus Mission Telescope. We show that performance of any figure control system is subject to limits on the controllability and observability of the quality of the wavefront. We present a wavefront-compensation method for the Focus Mission Telescope which uses mirror-figure sensors and three-axis segment actuator to directly minimize wavefront errors due to segment position errors. This approach shows significantly better performance when compared with a panel-state-compensation approach.

Redding, David↗

Numerical sensitivity analysis of passive EHF and SMMW channels to tropospheric water vapor, clouds, and precipitation

Potential uses of specific extremely High Frequency (EHF) and Sub-Millimeter-Wave (SMMW) channels at 90, 166, 183, 220, 325, 340, and 410 GHz for passive spaceborne remote sensing of the troposphere and lower stratosphere are investigated using an iterative numerical radiative transfer model. Collectively, these channels offer potential for high spatial resolution imaging using diffraction-limited apertures of practical size, along with the ability to profile water vapor, map precipitation beneath optically opaque cloud cover, and to measure nonprecipitating cloud (e.g., cirrus) parameters. A widely-spaced set of EHF and SMMW channels can yield observable degrees of freedom related to clouds and precipitation not available by exclusively using the more thoroughly studied microwave channels below 183 GHz. A new passive airborne imaging instrument for tropospheric meteorological sensing is described.

Gasiewski, A. J.↗

Mixed application MMIC technologies - Progress in combining RF, digital and photonic circuits

Approaches for future 'mixed application' monolithic integrated circuits (ICs) employing optical receive/transmit, RF amplification and modulation and digital control functions are discussed. We focus on compatibility of the photonic component fabrication with conventional RF and digital IC technologies. Recent progress at Honeywell in integrating several parts of the desired RF/digital/photonic circuit integration suite required for construction of a future millimeter-wave optically-controlled phased-array element are illustrated.

Swirhun, S.↗

Comparative study of bolometric and non-bolometric switching elements for microwave phase shifters

The performance of semiconductor and high critical temperature superconductor switches is compared as they are used in delay-line-type microwave and millimeter-wave phase shifters. Such factors as their ratios of the off-to-on resistances, parasitic reactances, power consumption, speed, input-to-output isolation, ease of fabrication, and physical dimensions are compared. Owing to their almost infinite off-to-on resistance ratio and excellent input-to-output isolation, bolometric superconducting switches appear to be quite suitable for use in microwave phase shifters; their only drawbacks are their speed and size. The SUPERFET, a novel device whose operation is based on the electric field effect in high critical temperature ceramic superconductors is also discussed. Preliminary results indicate that the SUPERFET is fast and that it can be scaled; therefore, it can be fabricated with dimensions comparable to semiconductor field-effect transistors.

Tabib-Azar, Massood↗