Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “materials modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44

Computational Investigation of Oxidative Etch Pitting in FiberForm and Its Impact on Material Properties

Oxidation-driven carbon erosion does not occur uniformly but rather through the development of localized etch pits at active surface sites. These active sites form due to atomic defects on the carbon surface, making them significantly more reactive than the surrounding, non-defective areas. As a result, these sites are the first to react during ablation, leading to their removal. This process creates new defects in neighboring atoms, increasing their reactivity and causing localized carbon removal around these active sites. In this way, the highly reactive defective areas serve as nucleation points for the formation and growth of etch pits, which can have adverse effects on structural integrity of FiberForm. To better understand how these etch pits impact the material properties of carbon fiber microstructures, we have developed a new capability within the direct simulation Monte Carlo (DSMC) framework to capture the etch pit formation process. This capability, integrated into the DSMC code SPARTA (Stochastic Parallel Rarefied-gas Time-accurate Analyzer), models material removal in the presence of active sites, leading to the formation of etch pits. The current work focuses on studying the effects of these etch pits on the material properties of FiberForm, a widely used base material in thermal protection systems (TPS). The microstructure of virgin FiberForm, obtained via X-ray microtomography, is imported into SPARTA to generate the ablated geometries with etch pits. These modified microstructures are then analyzed using the Porous Microstructure Analysis (PuMA) software to compute various material properties, including elasticity, thermal conductivity, and permeability. We investigate the variation of these properties due to the complex surface topology changes caused by etch pit formation. Additionally, we compare the effects of pitting with the conventional model of shrinking fibers, traditionally used to simulate the ablation of carbon structures. Significant differences emerge between the two approaches. Consequently, this physically realistic model of material removal through etch pit formation offers improved accuracy in predicting the degradation of carbon-based TPS during oxidation. It also provides insights into other mechanisms, such as spallation, where chunks of material are removed into the flow due to etch pit growth. Ultimately, this model enhances our understanding of failure modes in these materials during ablation.

PuMA↗

American Society of Composites, 32nd Technical Conference

This paper will present a general methodology by which weave draping manufacturing simulation results can be utilized to include the effects of weave draping and scissor angle in a structural multiscale simulation. While the methodology developed is general in nature, this paper will specifically demonstrate the methodology applied to a truncated pyramid, utilizing manufacturing simulation weave draping results from ESI PAM-FORM, and multiscale simulation using Altair Multiscale Designer (MDS) and OptiStruct. From a multiscale simulation perspective, the weave draping manufacturing simulation results will be used to develop a series of woven unit cells which cover the range of weave scissor angles existing within the part. For each unit cell, a multiscale material model will be developed, and applied to the corresponding spatial locations within the structural simulation mesh. In addition, the principal material orientation will be mapped from the wave draping manufacturing simulation mesh to the structural simulation mesh using Altair HyperMesh mapping technology. Results of the coupled simulation will be compared and verified against experimental data of the same available via General Motors (GM) Department of Energy (DOE) project.

42 ENGINEERING↗

Efficient Failure Probability Calculations and Modeling Interface Debonding in TRISO Particles with BISON

This document constitutes completion of the NEAMS milestone, which is titled Demonstrate efficiency improvements in TRISO failure probability calculations and the effect of debonding on fission product transport in TRISO fuel particles in Bison . In this report we present the development of the following: (1) the anisotropic elasticity model of pyrolytic carbon and extended material models using the local coordinate system for aspherical particle geometry; (2) a capability of modeling interface debonding in TRISO particles; and (3) an efficient high-fidelity approach to calculate the failure probability of TRISO particles. Benchmark problems and AGR-2 tests are used to verify the models and demonstrate these new capabilities.

36 MATERIALS SCIENCE↗

Shrinkage-induced deformations and creep of structural concrete: 1-year measurements and numerical prediction

Highlights: • Extensive experimental study on drying shrinkage, creep and microcracking of concrete • All specimens prepared from a single batch of ordinary-strength structural concrete • 1st year of measurements of (not only) non-uniformly drying beams with span up to 3-m • The database is downloadable from free-to-use research data repository • Modified MPS model for concrete creep used in blind prediction of all experiments The material models for creep and shrinkage operating on the material point level in FEM are usually intended for challenging complex applications and structures, where the average cross-sectional approach does not suffice. The identification of the growing number of material parameters induced by increasing model capabilities relies on very specific and narrow-oriented yet interconnected experiments which are scarce. The presented comprehensive experiments aim to provide a clearer image of the complicated interaction among the basic phenomena: drying, shrinkage, creep, and microcracking. The cornerstone of this ongoing research is a unique set of 30 partially-sealed unreinforced concrete beams with span 1.75–3.0 m subjected to drying. To minimize material variation, all specimens in this study were cast from a single batch of ordinary strength structural concrete with slag-blended binder. The resulting experimental database will be suitable both for validation and development of the constitutive models.

36 MATERIALS SCIENCE↗

Digital Twin Model for Advanced Manufacture of a Rotating Detonation Engine Injector

A digital twin material model (DTMM) of an additive manufacturing (AM) process was created to advance the state of the art in rotating detonation engine (RDE) injector design. Current RDE injectors are designed with large pressure drops, enabling a stable and repeatable combustion process. However, this comes at the cost of system efficiency. For the technology to transition to commercial fossil-based power generation, it is important to develop injectors with reduced flow losses. Low-loss injectors are difficult to design and manufacture with conventional manufacturing techniques. AM enables new design options, but the AM manufacturing process must be thoroughly understood to result in a robust design. A DTMM provides the necessary insight by defining the cause-effect relationships between process parameters, microstructure features, and properties. Therefore, a DTMM to support the design and manufacturing process was developed and applied to the design of a new additively manufactured low-loss injector. The injector combustion behavior was characterized through hot-fire tests, and mechanical performance was compared to the DTMM predictions. The two project goals were the successful development of the DTMM and the demonstration of an improved RDE injector design. The RDE injector design and DTMM developments occurred on parallel but dependent paths. The injector was designed to reduce pressure drop by increasing the cross-sectional flow area ratio between the injector air passages and the combustor annulus. This resulted in less structural material, raising the concern that thin members would be susceptible to high-cycle fatigue (HCF) under the periodic loading inherent to an RDE. It was most important for the DTMM to predict behavior in these features; therefore, the injector design concept guided the material thicknesses used in fatigue tests. The DTMM development started by manufacturing a series of coupons over the range of possible AM process variations. A design-of-experiment approach was used to select which process variable combinations gave the most efficient coverage relevant to the injector design space. The microstructure in each of these coupons was characterized, and then computational methods were used to create a numerical model of the correlation between process variables and microstructure. Next, a set of HCF samples were tested to calibrate existing models that map microstructure to HCF performance. Together, these two links formed the DTMM that calculates HCF behavior from AM process variables. Two injector prototypes were additively manufactured. The first injector design strategy aggressively pursued low-loss performance by substantially increasing the oxidizer flow area. The combination of manufacturing lead times and the fatigue testing schedule meant that the DTMM was not available when building this first prototype. Therefore, its process parameters were chosen based on a manual review of the available coupon data. This prototype was built successfully and evaluated in 58 combustion tests. Sustained detonation was achieved with remarkably reduced pressure loss, and some tests even displayed pressure loss characteristics similar to conventional gas turbine combustors. This achieved the project goal of improving RDE injector design. The second injector was manufactured according to the optimized parameters predicted by the DTMM. The flow area modifications of this injector were less aggressive than the first injector since demonstrating low pressure loss was not an objective of the second hot-fire test series. Rather, the test objective was to cause high cycle fatigue failure in the part due to periodic loading from the rotating detonation wave. The observed number of cycles to failure was to be compared to the number predicted by the DTMM and thereby assess the utility of the DTMM in component design. However, the required level of vibration was not obtained during combustion. Therefore, high cycle fatigue was not experienced in the hot-fire tests of the second injector. Fatigue data was obtained by further testing the second injector in a conventional HCF test apparatus. The injector demonstrated HCF strength above the DTMM prediction. In fact, it did not fail and testing was only discontinued due to reaching the end of the period of performance. This points to some success in the project’s primary goal of successfully developing and applying the DTMM to a component design. Implementing the DTMM recommendations for optimal processing parameters led to a part with acceptable properties. The DTMM was also shown to be an efficient correlator of data and to provide insight into the relationship between process settings, microstructure, and property performance. However, the failure of the DTMM prediction to match the experimental result of the injector fatigue test also points to the need to include significantly more data in the model development. In this project, coupons made with identical processing parameters exhibited drastically different properties from each other and from the injector part, which clearly influences the accuracy of a model that predicts performance based on parameters. Uncertainties in the build process must be quantified to develop more robust models. A denser and broader matrix of coupon process and geometry variations, several repeated builds of every point, more in-situ build process measurements, and direct observation of tensile and HCF sample microstructure (as opposed to separate microstructure specimens) are recommendations to improve future AM modeling efforts.

20 FOSSIL-FUELED POWER PLANTS↗

Application of Electronics Packaging Fundamentals to Photovoltaic Interconnects and Packaging

The energy capacity of photovoltaic (PV) installations worldwide has increased significantly in the last decade, increasing the demand for rigorous investigation of the physical phenomena causing degradation and failures in PV modules. As PV reliability science develops, established methods and approaches from longer-standing industries can inform and expedite PV reliability advances. This work demonstrates how thermomechanical solder bond fatigue models derived for electronics packaging applications can be applied to both standard and emerging PV interconnect designs. This expertise cannot be directly translated to PV however, as target PV module lifetimes are significantly longer than most electronics and the modules must withstand the natural climate wherever they are deployed. Verification of analytical reliability models is then an additional challenge, due to model size, test time, and climate variability. Furthermore, unconventional materials, such as low-temperature solders, are now being integrated into PV designs, for which appropriate material models must be selected and material parameters derived. In this paper, the current state of PV interconnect research is explored, with an emphasis on the experimental and simulation approaches and models being used for this work. Recent results for standard module architectures as well as emerging interconnect schemes are discussed.

14 SOLAR ENERGY↗

A position-aware linear solid constitutive model for peridynamics

A position-aware linear solid (PALS) peridynamic constitutive model is proposed for isotropic elastic solids. The PALS model addresses problems that arise, in ordinary peridynamic material models such as the linear peridynamic solid (LPS), due to incomplete neighborhoods near the surface of a body. We improved model behavior in the vicinity of free surfaces through the application of two influence functions that correspond, respectively, to the volumetric and deviatoric parts of the deformation. Furthermore, the model is position-aware in that the influence functions vary over the body and reflect the proximity of each material point to free surfaces. Demonstration calculations on simple benchmark problems show a sharp reduction in error relative to the LPS model.

36 MATERIALS SCIENCE↗

Inelastic equation of state for solids

In this study, a complete inelastic equation of state (IEOS) for solids is developed based on a superposition of thermodynamic energy potentials. The IEOS allows for a tensorial stress state by including an isochoric hyperelastic Helmholtz potential in addition to the zero-kelvin isotherm and lattice vibration energy contributions. Inelasticity is introduced through the nonlinear equations of finite strain plasticity which utilize the temperature dependent Johnson–Cook yield model. Material failure is incorporated into the model by a coupling of the damage history variable to the energy potentials. The numerical evaluation of the IEOS requires a nonlinear solution of stress, temperature and history variables associated with elastic trial states for stress and temperature. The model is implemented into the ALEGRA shock and multi-physics code and the applications presented include single element deformation paths, the Taylor anvil problem and an energetically driven thermo-mechanical problem.

42 ENGINEERING↗

Modeling Extreme Deformations in Lithium Ion Batteries

A simultaneously coupled modeling approach to study the electrochemical and thermal behavior of lithium-ion batteries under large mechanical deformation has been developed. The thermo-electrochemical pseudo-2D (P2D) battery model is coupled with a mechanical material model. Mechanical, thermal, and electrochemical models are implemented as user-defined sub-routines in the commercial multi-physics code LS-DYNA. The mechanical strain experienced by anode, cathode and separator results in thickness and porosity changes in each layer which in turn influences electrochemical behavior. The evolution of concentration profiles and cell potential are studied under different mechanical loading conditions. Internal short-circuits caused by mechanical deformation and corresponding physical behaviors are also elucidated. We discuss the competing effects of improved transport at higher temperature due to the internal short-circuit versus a drop in the effective ionic conductivity and electrolyte diffusivity due to mechanical deformation.

47 OTHER INSTRUMENTATION↗

Dynamics, Radiation, and Overall Energy Budget of Earthquake Rupture With Coseismic Off-Fault Damage

Earthquake ruptures dynamically activate coseismic off–fault damage around fault cores. Systematic field observation efforts have shown the distribution of off–fault damage around main faults, while numerical modeling using elastic–plastic off–fault material models have demonstrated the evolution of coseismic off–fault damage during earthquake ruptures. Laboratory–scale microearthquake experiments have pointed out the enhanced high–frequency radiation due to the coseismic off–fault damage. However, the detailed off–fault fracturing mechanisms, subsequent radiation, and its contribution to the overall energy budget remain to be fully understood because of limitations of current observational techniques and model formulations. Here, we constructed a new physics–based dynamic earthquake rupture modeling framework, based on the combined finite–discrete element method, to investigate the fundamental mechanisms of coseismic off–fault damage, and its effect on the rupture dynamics, the radiation and the overall energy budget. We conducted a 2–D systematic case study with depth and showed the mechanisms of dynamic activation of the coseismic off–fault damage. We found the decrease in rupture velocity and the enhanced high–frequency radiation in near field due to the coseismic off–fault damage. We then evaluated the overall energy budget, which shows a significant contribution of the coseismic off–fault damage to the overall energy budget even at depth, where the damage zone width becomes narrower. Here, the present numerical framework for the dynamic earthquake rupture modeling thus provides new insights into earthquake rupture dynamics with the coseismic off–fault damage.

58 GEOSCIENCES↗

Nature of charge density wave in kagome metal ScV6Sn6

Abstract Recently, kagome lattice materials have emerged as a new model material platform for discovering and engineering novel quantum phases of matter. In this work, we elucidate the driving mechanism of the $$\sqrt{{{3}}}$$ 3 × $$\sqrt{{{3}}}$$ 3 charge order in a newly discovered kagome metal ScV 6 Sn 6 . Through multimodal investigations combining angle-resolved photoemission spectroscopy, phonon dispersion calculations, and phase diagram study, we identify the central role of unstable planar Sn and Sc phonon modes, while the electronic instability and van Hove singularities originating from the V kagome lattice have a marginal influence. Our results highlight that the $$\sqrt{{{3}}}$$ 3 × $$\sqrt{{{3}}}$$ 3 charge order in ScV 6 Sn 6 is fundamentally distinguished from the electronically driven 2 × 2 charge order in the canonical kagome system AV 3 Sb 5 , uncovering a new mechanism to induce symmetry-breaking phase transition in kagome lattice materials.

36 MATERIALS SCIENCE↗

Nanocrystalline iron oxide based electroactive materials in lithium ion batteries: the critical role of crystallite size, morphology, and electrode heterostructure on battery relevant electrochemistry

The importance of crystallite size control and direct synthesis of materials with desirable properties is broadly applicable for the rational design and development of new active materials for energy storage. Recently, the use of nanoparticles and crystallite size control has redefined electrode design strategies, due in part to the large surface area/volume ratios providing more pathways for ion movement within the bulk electrode. This review is structured primarily as a case study, where reports involving a specific densely structured iron oxide, magnetite, Fe 3 O 4 , and its use as an electrode in LIBs are used as examples. Due to the high theoretical capacity (924 mA h g –1 ), and opportunity for implementation of a low cost electrode material, magnetite was selected as the model material for this review. Notably, crystallite size, morphology, and electrode heterostructure can all play a critical role in battery relevant electrochemistry, particularly for crystallographically dense materials such as Fe 3 O 4 . Several examples of Fe 3 O 4 based composites are described, incorporating different types of conductive materials such as carbons as part of the structure. Further, this review also provides a brief introduction to a newer iron oxide based material with a 2D layered structure, silver ferrite, where crystallite size control was synthetically achieved. By focusing on two specific iron oxide based nanoscale inorganic materials, this review highlights and distinguishes the contributions of electroactive material crystallite size, morphology and electrode heterostructure to electrochemical behavior, facilitating the future development of next generation of battery electrodes.

25 ENERGY STORAGE↗

Field-tuned ferroquadrupolar quantum phase transition in the insulator TmVO 4

We report results of low-temperature heat-capacity, magnetocaloric-effect, and neutron-diffraction measurements of TmVO 4 , an insulator that undergoes a continuous ferroquadrupolar phase transition associated with local partially filled 4 f orbitals of the thulium (Tm 3 + ) ions. The ferroquadrupolar transition, a realization of Ising nematicity, can be tuned to a quantum critical point by using a magnetic field oriented along the c axis of the tetragonal crystal lattice, which acts as an effective transverse field for the Ising-nematic order. In small magnetic fields, the thermal phase transition can be well described by using a semiclassical mean-field treatment of the transverse-field Ising model. However, in higher magnetic fields, closer to the field-tuned quantum phase transition, subtle deviations from this semiclassical behavior are observed, which are consistent with expectations of quantum fluctuations. Although the phase transition is driven by the local 4 f degrees of freedom, the crystal lattice still plays a crucial role, both in terms of mediating the interactions between the local quadrupoles and in determining the critical scaling exponents, even though the phase transition itself can be described via mean field. In particular, bilinear coupling of the nematic order parameter to acoustic phonons changes the spatial and temporal fluctuations of the former in a fundamental way, resulting in different critical behavior of the nematic transverse-field Ising model, as compared to the usual case of the magnetic transverse-field Ising model. Our results establish TmVO 4 as a model material and electronic nematicity as a paradigmatic example for quantum criticality in insulators.

36 MATERIALS SCIENCE↗

Fracture Analysis of Cohesive Zone Models for Modeling Residual Stress Induced Delamination in Composite Structures

A fracture study of coupon-scale composite cylinders with embedded defects was conducted with an objective to assess and validate a modeling approach using two available cohesive material models. The study included experimental and simulation evaluations of initiation of crack growth and progression. Interrupted thermal experiments used acoustic emissions monitoring to identify the onset of crack progression during each cooling interval and ultrasonic scanning provided images of defect growth. Verification, validation, and uncertainty quantification (VVUQ) processes were performed in the assessment of the simulation predicted temperature at which crack propagation begins (quantity of interest). The Sobol sensitivity analysis identified the hoop direction elastic modulus in the carbon fiber reinforced polymer (CFRP) plies as the most influential parameter for simulations using both cohesive models, accounting for at least 70% of the variation in the temperature at crack propagation. The UQ temperature range for the Tvergaard-Hutchinson model was higher (more conservative) than the experimental acoustic measurement indicators of crack progression, while the temperature range for the Thouless-Parmigiani model enveloped the experimental data points for the primary defect size of 0.75 x 1 in. The simulations could not capture the stable crack growth indicated in the experiments. This is likely due to the models’ inability to represent anisotropic fracture toughness attributed to the structure of the orthotropic fiber weave in a woven composite laminate.

42 ENGINEERING↗

Physical concepts in the development of constitutive equations

Proposed viscoplastic material models include in their formulation observed material response but do not generally incorporate principles from thermodynamics, statistical mechanics, and quantum mechanics. Numerous hypotheses were made for material response based on first principles. Many of these hypotheses were tested experimentally. The proposed viscoplastic theories and the experimental basis of these hypotheses must be checked against the hypotheses. The physics of thermodynamics, statistical mechanics and quantum mechanics, and the effects of defects, are reviewed for their application to the development of constitutive laws.

Cassenti, B. N.↗

Dendritic solidification of alloys in low gravity

The effect of low gravity during solidification on primary and secondary dendrite spacings is investigated. Dendritic spacing data for iron-carbon-type alloys and superalloys which were directionally solidified during aircraft low-g trajectories are examined. The low-g data data are compared with data for metal model materials and binary alloys, and theoretical models to explain the dendritic spacing are considered.

Curreri, P. A.↗

Special Considerations in Selection of Fabric Film Laminates for Use in Inflatable Structures

Inflatable structures are gaining wide support in planetary scientific missions as well as commercial applications. For such applications a new class of fabric/film laminates is being considered for use as a structural gas envelope. The emerging composite materials are a result of recent advances in the manufacturing of lightweight, high strength fibers, fabrics and scrims. The lamination of these load-carrying members with the proper gas barriers results in a wide range of materials suitable for various loading and environmental conditions. Polyester-based woven fabrics laminated to thin homogenous film of polyester are an example of this class. This fabric/film laminate is being considered for the development of a material suitable for building large gas envelopes for use in the NASA ultra long duration balloon program (ULDB). Compared to commercial homogenous films, the material provides relatively high strength to weight ratio as well as better resistance to crack and tear propagation, The mechanical, creep and viscoelastic properties of these fabric film laminates have been studied to form a material model. Preliminary analysis indicates that the material is highly viscoelastic. The mechanical properties of this class of materials will be discussed in some details.

Said, Magdi A.↗

Nonlinear Seismic Correlation Analysis of the JNES/NUPEC Large-Scale Piping System Tests.

The Japan Nuclear Energy Safety Organization/Nuclear Power Engineering Corporation (JNES/NUPEC) large-scale piping test program has provided valuable new test data on high level seismic elasto-plastic behavior and failure modes for typical nuclear power plant piping systems. The component and piping system tests demonstrated the strain ratcheting behavior that is expected to occur when a pressurized pipe is subjected to cyclic seismic loading. Under a collaboration agreement between the US and Japan on seismic issues, the US Nuclear Regulatory Commission (NRC)/Brookhaven National Laboratory (BNL) performed a correlation analysis of the large-scale piping system tests using derailed state-of-the-art nonlinear finite element models. Techniques are introduced to develop material models that can closely match the test data. The shaking table motions are examined. The analytical results are assessed in terms of the overall system responses and the strain ratcheting behavior at an elbow. The paper concludes with the insights about the accuracy of the analytical methods for use in performance assessments of highly nonlinear piping systems under large seismic motions.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗