Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “materials design”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Quantum chemically calculated Abraham parameters for quantifying and predicting polymer hydrophobicity

The leakage and accumulation of plastic in the environment is a significant and growing problem with numerous detrimental impacts and has led to a push toward the design and development of more environmentally benign materials. To this end, we have developed a quantum chemistry-based model for predicting the mobility of polymer materials from molecular structure. Hydrophobicity is used as a surrogate for mobility given that hydrophobic interactions drive much of the partitioning of contaminants in and out of various environmentally relevant compartments. To model polymer hydrophobicity, we adjusted a previously developed Quantum Chemically Calculated Abraham Parameter model to calculate Abraham parameters of small molecules from molecular structure information. The resulting model predicted the octanol-water partition coefficient (K OW ) of polymer repeating units with a root mean square error (RMSE) of 0.48 (log scale). Additionally, the hydrophobicity of high molecular weight polymer materials was captured through solubility parameters and Nile red staining experiments from the literature and predicted with RMSEs of 1.21 (J/cc) 0.5 and 3.42 nm, respectively. Finally, to test the environmental applicability of the model, the relative adsorption capacity of three polymers was predicted and used to unify sorption isotherms across multiple sorbates and polymer sorbents.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Rutherford-in-Copper-Channel Conductor for the MARCO Solenoidal Detector Magnet

MARCO will be a superconducting solenoid for a new particle physics detector of the upcoming Electron Ion Collider (EIC) at Brookhaven National Laboratory (NY, USA). The design field at the interaction point is 2.0 T with a nominal current of about 4 kA at 4.5 K. For this magnet, an aluminumstabilized conductor was considered at the very preliminary design phase. After that, since the lack of manufacturers able to deal with aluminum extrusion, copper has been chosen as stabilizer. Thanks to a dedicated design effort, the copper stabilizer and accompanying material choices provided acceptable hadronic interaction length. The conductor is based on a NbTi Rutherford cable that is soldered in a U-shaped copper profile. Here, this paper goes through the definition of the conductor crosssection according to the project requirements and the supplier capabilities. Its characteristics will be detailed and discussed, in particular the RRR and the yield strength of the copper channel needed for protection and mechanics respectively. Finally, a proposal on how to make the joint between two conductors is presented.

Stacchi, Francesco [Commissariat a l'Energie Atomi↗
DOE OSTI2025

Differential absorption of circularly polarized light by a centrosymmetric crystal

Crystalline solids are governed by universal structure-property relationships derived from their crystal symmetry, leading to paradigmatic rules on what properties they can and cannot exhibit. A long-held structure-property relationship is that centrosymmetric crystals cannot differentially absorb circularly polarized light. In this study, we demonstrate the design, synthesis, and characterization of the centrosymmetric material Li 2 Co 3 (SeO 3 ) 4 , which violates this relationship not by defying symmetry-imposed selection rules but by invoking a photophysical process not previously characterized for crystalline solids. This process originates from an interference between linear dichroism and linear birefringence, referred to as LD-LB, and involves strong chiroptical signals that invert upon sample flipping. Here, in addition to enabling a chiroptical response under centrosymmetry, this process opens up photonic engineering opportunities based on crystalline solids.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Cracking the failure of lithium batteries

Lithium batteries that use a solid electrolyte have the potential to improve safety and increase the amount of stored energy . This makes solid-state electrochemical cells a promising option for electric vehicles and wearable devices. However, nonuniform plating or stripping of lithium at the interface between an anode (negative electrode) and the electrolyte during charging and discharging leads to growth of detrimental lithium filaments (dendrites) that short-circuit the battery cell. This problem even occurs when the battery operates at small currents. The underlying mechanism of this failure is not well understood. On page 311 of this issue, Wang et al. (1) report that structural defects accumulate in the lithium metal anode under repeated charging and discharging at a small current. This is similar to mechanical fatigue that is observed over longer periods of intermittent straining of a material. Here, the observation could guide the design of lithium batteries with increased life span.

25 ENERGY STORAGE↗
DOE OSTI2025

3D printable silicone compositions exhibiting high toughness and low durometer

3D printable silicones can be designed with varying crosslink density, network structures, and types of reinforcing additives. Within this design space, one may tailor the uncured material’s rheology and mechanical response to access a wide range of potential applications. However, printable, low modulus silicones, particularly those applicable to direct ink write, are underreported in published literature. To address the need for higher performance, low modulus silicones with demonstrated printability, a new set of ca. 20–50 Shore A hardness silicone elastomers exhibiting ca. 7 MPa ultimate tensile strength and ca. 400–1200% elongation at break is presented. Mechanical properties were analyzed, providing insight to the effects of formulation constituents on mechanical properties. Cyclic mechanical testing of the silicone formulations was also performed, and the energy loss and permanent set throughout cycling were determined. In conclusion, printed structures demonstrate the feasibility of these new silicones as durable frameworks for novel soft device applications.

36 MATERIALS SCIENCE↗
DOE OSTI2025

EDX ClaiMM

EDX ClaiMM is a centralized data & analytical platform designed to revolutionize U.S. critical minerals and materials (CMM) activities. By providing a robust digital infrastructure, ClaiMM will accelerate the combination, leveraging, and rapid utilization of vital data, advanced tools, and cutting-edge research advancements in CMM. This adaptive digital research hub connects the CMM community to essential knowledge products and offers access to interoperable datasets, databases, models, software, and tools from the National Energy Technology’s (NETL’s) Energy Data eXchange (EDX) and other authoritative sources, serving both public and private sectors. EDX ClaiMM delivers AI-informed solutions to address fundamental knowledge gaps and fosters the innovation of new techniques for enhanced characterization and recovery of CMMs within the U.S. By leveraging cloud-hosted, scalable digital infrastructure, ClaiMM meets public–private applied energy needs. It equips the CMM community with priority digital resources that harness on-site and cloud compute capabilities, enabling big data storage, advanced processing, analytics, and visualization.

Critical Materials; Critical Minerals; Rare Earth ↗
DOE OSTI2025

TIGER, A thermodynamics Equilibrium Tool for Explosives Update: Improved Solver

The thermodynamic equilibrium code known as TIGER has been in use since the 1970s and is designed to calculate the performance of energetic materials during detonation at high temperatures and pressures. The original TIGER code utilized a limited database consisting of 12 gaseous and 3 condensed constituents, which were composed of the elements carbon (C), hydrogen (H), nitrogen (N), oxygen (O), and aluminum (Al). In contrast, the more modern JCZS3 database features a significantly larger dataset, including 756 gaseous species, 189 positive and negative ions, and 496 condensed constituents derived from 62 different elements. While this expanded product species database allows for the exploration of a broader range of problems relevant to our laboratory, it also introduces challenges related to convergence, particularly when both liquid and solid species coexist under a vapor dome. In this work, we present an improved TIGER solution technique aimed at accurately determining the equilibrium state for systems that can produce a diverse array of products, including both solid and liquid condensed species. This report presents the status of the TIGER solver as of the end of FY25. Ongoing efforts are focused on enhancing the solver, and the report outlines several planned improvements. We anticipate that further developments will require additional documentation in the future.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Low-Mass and High-Efficiency Engine for Medium-Duty Truck Applications

This collaborative multi-year advanced engine technology project summarized in the report is to develop low mass and high efficiency medium-duty truck engine. The project was proposed as a large-scale engine design and demonstration enabled by an advanced materials and manufacturing development program, with a comprehensive plan spanning a period of four years (two phases).

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2025

Observation-Based Constraints on the Condensational Growth of Marine Aerosol Particles to Cloud Condensation Nuclei in the Eastern North Atlantic

This report describes the results from a field project in the Eastern North Atlantic (Aerosol Growth in the Eastern North Atlantic; AGENA) that was designed to determine the source of condensable material that contributes to the growth of Aitken-mode aerosol particles to CCN in the remote marine boundary layer at the ARM Eastern North Atlantic (ENA) location.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Optical-Gating of Spin-based Quantum States (Final Report)

This project developed a generalizable strategy for optical control of spin-based quantum states through the Photoisomerization-Induced Spin–Charge Excited State (PISCES) process, in which a photochromic spirooxazine ligand bound to an electronically bistable metal complex enables reversible, room-temperature optical switching of spin states in both dilute matrices and the solid state. A multidisciplinary team integrated synthesis, spectroscopy, theory, and surface science to establish design principles for opto-spintronic quantum materials. Systematic structure–property studies across four spirooxazine series revealed that donor–π–acceptor interactions govern thermal isomerization, which proceeds via a rotational pathway. Pulsed EPR measurements demonstrated millisecond-scale coherence times in cobalt-dioxolene-spirooxazine complexes, establishing their promise as optically addressable molecular qubits; the approach was extended to Cu(II), Ni(II), and lanthanide complexes, including optical modulation of zero-field splittings and clock transitions. Two-dimensional IR spectroscopy resolved picosecond ground-state population exchange dynamics, while ab initio calculations elucidated photoisomerization mechanisms and parametrized Hamiltonians for spin relaxation and decoherence. Toward device integration, the team fabricated 2D polymer scaffolds for covalent qubit organization, developed tip-enhanced Raman imaging of molecular monolayers, and demonstrated optical gating of gate voltage in spirooxazine-graphene field-effect transistors. The project produced numerous publications, dissertations, and presentations, and trained over 30 researchers.

2D polymers↗
DOE OSTI2024

Beyond the Hype: Navigating the Promise and Pitfalls of Multi-Modal Models for Materials Science

Multi-modal models offer great potential for accelerating discovery in materials and chemical systems, but their adoption raises crucial questions: What materials science challenges are best addressed by multi-modal approaches? How do we weigh the benefits against the resource investment required for multi-modal data acquisition? And critically, how can we optimize experimental workflows to leverage these models effectively? In this presentation, I will delve into the development of multi-modal characterization and analytics, focusing on their application in the demanding fields of next-generation microelectronics and energy storage materials. I will share challenges encountered in designing these workflows, highlighting lessons learned and posing questions that remain unanswered.

AI↗
DOE OSTI2025

Clean Energy for the Battery-to-EV Supply Chain: A Roadmap for Indonesia - Summary Brief

Indonesia has a unique opportunity to support the clean energy transition, enhance energy security, and spur economic growth with local battery manufacturing, bridging from the material supply all the way to pack designs and, ultimately, the manufacturing of electric cars. Following the elevation of United States and Indonesia relations to a Comprehensive Strategic Partnership, leaders of both countries highlighted the importance of Net Zero World support for Indonesia's energy transition, including collaboration on low-carbon battery supply chains. In support of this agreement, Net Zero World has partnered with Indonesia's Ministry of Energy and Mineral Resources and other Indonesian partners to chart actionable steps for establishing a clean, resilient battery supply chain and circular economy. This partnership aims to position Indonesia as a regional leader in clean energy and can help attract investment in the domestic battery and electric vehicle (EV) sectors.

batteries↗
DOE OSTI2025

Innovative PLC Design for Optimized Potable Water Managment

My project here at Idaho National Laboratory (INL) was to work on Potable Water PLC Design (Programmable Logic Controllers). I was tasked in making a new panel design for the PLC system that will be moved from TRA BLDG 696 to TRA BLDG 608. This design needed to be updated since the old PLC system being about 20 years old. The manufacturer of the MicroLogix 1200 life expectancy showed it to be 10-20 years, and the system was discontinued in 2017. The new system we implemented was called CompactLogix Controller 5380, along with a new 24 VDC/10 Amp Power Supply. I made a design using Microsoft Visio, with the new material. But we needed to add it onto an Aluminum Panel that the system will be mounted onto, we need Unistrut’s for the aluminum panel to be mounted to. Some of the material we will still be using, like the R1 Alarm Relay, will be moving with the PLC system. The rest of the material will be new supplies that need to be updated systems, which the site is waiting for to complete the PLC system.

47 - OTHER INSTRUMENTATION↗
DOE OSTI2026

Hierarchical Epoxy Structures via Tunable Polymerization-Induced Phase Separation Combined with Additive Manufacturing

Polymerization-induced phase separation (PIPS) allows for the control of thermoset morphologies and properties, enabling the tuning of domain sizes and thermomechanical response. However, its use in generating substructural features in additively manufactured materials has been limited. In this work, we combine epoxy PIPS with UV curable acrylate and rheological modifiers to print nano- to macro-phase separating materials via a two-step, dual-cure approach. This method enables direct ink write printing of hierarchical structures with both controlled morphologies through phase separation and macroscale architecture through print design. We find that formulations for phase-separating materials require judicious incorporation of additives to enable printability and to provide sufficient green strength. Atomic force microscopy-nano infrared mapping reveals tunable, reticulated nano- to micron-scale domains of the resultant multiphase materials and their morphology changes due to additives, resulting in alterations to thermomechanical and tensile properties. Shape memory behavior is also demonstrated through multimaterial additive manufacturing of epoxies with functionally graded internal morphology using active mixing techniques, highlighting this method’s ability to fabricate complex architectures with controlled morphologies and thermomechanical response.

Van Meter, Kylie E [Organic Materials Science, San↗
DOE OSTI2025

Design Optimization of a Criticality Experiment for the Molten Chloride Reactor Experiment Facility

Neutronics simulations of Molten Chloride Fast Reactors have quantifiable biases that arise from nuclear data, modeling choices, or numerical methods. The multiphysics nature of molten salt reactors makes it challenging to disentangle neutronics modeling biases from biases originating from other physical phenomena. In comparison to a mock-up reactor, criticality experiments can specifically assess the neutronics modeling bias while limiting multiphysics effects. The criticality experiment must be neutronically representative of the full-scale reactor to be valuable. Here, in this paper, we describe the design of a criticality experiment to validate only the neutronics of TerraPower’s Molten Chloride Reactor Experiment (MCRE) and its criticality safety upset scenarios. The proposed experiment uses different chlorine-containing materials to maximize its similarity to the MCRE. The design process uses a constrained Bayesian optimization algorithm to investigate different objective functions that use covariance information for 35 Cl nuclear data. The experiments could reduce the nuclear data–induced uncertainty in k eff of the MCRE from 2161 to 886 pcm. They would also increase the upper subcritical limit of the MCRE criticality safety upset scenario from 0.94101 to 0.94476 when using the WHISPER analysis framework.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2025

High entropy alloys as catalysts: A focused review

A brief literature review of recent experimental and computational efforts on the use of high entropy alloys (HEAs) as catalysts is presented, while also sharing some perspectives and future insights. To fully broach the vast compositional possibilities of HEA materials, integrating computational modeling with high-throughput experimental synthesis and validation is necessary to accelerate their design and development. Once identified, specific HEAs can be a class of materials for the next generation of catalysts when addressing global challenges related to energy independence, commodity chemical production, environmental remediation, abating emissions, and modernized domestic supply chain resilience.

42 - ENGINEERING↗
DOE OSTI2026

Mechanical behaviour of additively manufactured metals

Additive manufacturing is reshaping the production of engineering components in diverse industries, such as the automotive, aerospace, defense, and biomedical sectors, by offering unprecedented design flexibility. The non-equilibrium processing conditions of additive manufacturing generate materials with unique microstructures and tailored mechanical properties that are often unattainable through conventional routes. This review focuses on recent advances in additively manufactured metals that demonstrate distinctive mechanical behaviors, including strength-ductility synergy, microstresses and gradient plasticity, fracture and fatigue resistance, and high-temperature creep performance. Here, we examine the mechanisms and micromechanical effects arising from the heterogeneous microstructures fabricated by additive manufacturing, to guide the design of a wide range of high-performance structural materials. Furthermore, we discuss critical research needs and emerging opportunities in process control, alloy design, advanced characterization, high-fidelity computational modeling, and machine learning aimed at achieving exceptional mechanical properties in additively manufactured metals.

Additive Manufacturing↗
DOE OSTI2025

Artificial Intelligence and Multiscale Modeling for Sustainable Biopolymers and Bioinspired Materials

Abstract Biopolymers and bioinspired materials contribute to the construction of intricate hierarchical structures that exhibit advanced properties. The remarkable toughness and damage tolerance of such multilevel materials are conferred through the hierarchical assembly of their multiscale (i.e., atomistic to macroscale) components and architectures. Here, the functionality and mechanisms of biopolymers and bio‐inspired materials at multilength scales are explored and summarized, focusing on biopolymer nanofibril configurations, biocompatible synthetic biopolymers, and bio‐inspired composites. Their modeling methods with theoretical basis at multiple lengths and time scales are reviewed for biopolymer applications. Additionally, the exploration of artificial intelligence‐powered methodologies is emphasized to realize improvements in these biopolymers from functionality, biodegradability, and sustainability to their characterization, fabrication process, and superior designs. Ultimately, a promising future for these versatile materials in the manufacturing of advanced materials across wider applications and greater lifecycle impacts is foreseen.

Wang, Xing Quan [Department of Mechanical Engineer↗