SEARCH · Engineering Papers

Results for “map improvement”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44

All sources NASA NTRS DOE OSTI

NASA NTRS2010

Multiple Spectral-Spatial Classification Approach for Hyperspectral Data

A .new multiple classifier approach for spectral-spatial classification of hyperspectral images is proposed. Several classifiers are used independently to classify an image. For every pixel, if all the classifiers have assigned this pixel to the same class, the pixel is kept as a marker, i.e., a seed of the spatial region, with the corresponding class label. We propose to use spectral-spatial classifiers at the preliminary step of the marker selection procedure, each of them combining the results of a pixel-wise classification and a segmentation map. Different segmentation methods based on dissimilar principles lead to different classification results. Furthermore, a minimum spanning forest is built, where each tree is rooted on a classification -driven marker and forms a region in the spectral -spatial classification: map. Experimental results are presented for two hyperspectral airborne images. The proposed method significantly improves classification accuracies, when compared to previously proposed classification techniques.

Tarabalka, Yuliya↗

NASA NTRS2011

A Background Noise Reduction Technique Using Adaptive Noise Cancellation for Microphone Arrays

Background noise in wind tunnel environments poses a challenge to acoustic measurements due to possible low or negative Signal to Noise Ratios (SNRs) present in the testing environment. This paper overviews the application of time domain Adaptive Noise Cancellation (ANC) to microphone array signals with an intended application of background noise reduction in wind tunnels. An experiment was conducted to simulate background noise from a wind tunnel circuit measured by an out-of-flow microphone array in the tunnel test section. A reference microphone was used to acquire a background noise signal which interfered with the desired primary noise source signal at the array. The technique s efficacy was investigated using frequency spectra from the array microphones, array beamforming of the point source region, and subsequent deconvolution using the Deconvolution Approach for the Mapping of Acoustic Sources (DAMAS) algorithm. Comparisons were made with the conventional techniques for improving SNR of spectral and Cross-Spectral Matrix subtraction. The method was seen to recover the primary signal level in SNRs as low as -29 dB and outperform the conventional methods. A second processing approach using the center array microphone as the noise reference was investigated for more general applicability of the ANC technique. It outperformed the conventional methods at the -29 dB SNR but yielded less accurate results when coherence over the array dropped. This approach could possibly improve conventional testing methodology but must be investigated further under more realistic testing conditions.

Spalt, Taylor B.↗

NASA NTRS2012

Improving the Accuracy of the AFWA-NASA (ANSA) Blended Snow-Cover Product over the Lower Great Lakes Region

The Air Force Weather Agency (AFWA) -- NASA blended snow-cover product, called ANSA, utilizes Earth Observing System standard snow products from the Moderate- Resolution Imaging Spectroradiometer (MODIS) and the Advanced Microwave Scanning Radiometer for EOS (AMSR-E) to map daily snow cover and snow-water equivalent (SWE) globally. We have compared ANSA-derived SWE with SWE values calculated from snow depths reported at ~1500 National Climatic Data Center (NCDC) co-op stations in the Lower Great Lakes Basin. Compared to station data, the ANSA significantly underestimates SWE in densely-forested areas. We use two methods to remove some of the bias observed in forested areas to reduce the root-mean-square error (RMSE) between the ANSA- and station-derived SWE. First, we calculated a 5- year mean ANSA-derived SWE for the winters of 2005-06 through 2009-10, and developed a five-year mean bias-corrected SWE map for each month. For most of the months studied during the five-year period, the 5-year bias correction improved the agreement between the ANSA-derived and station-derived SWE. However, anomalous months such as when there was very little snow on the ground compared to the 5-year mean, or months in which the snow was much greater than the 5-year mean, showed poorer results (as expected). We also used a 7-day running mean (7DRM) bias correction method using days just prior to the day in question to correct the ANSA data. This method was more effective in reducing the RMSE between the ANSA- and co-op-derived SWE values, and in capturing the effects of anomalous snow conditions.

Hall, Dorothy K.↗

NASA NTRS2013

Mapping the Daily Progression of Large Wildland Fires Using MODIS Active Fire Data

High temporal resolution information on burned area is a prerequisite for incorporating bottom-up estimates of wildland fire emissions in regional air transport models and for improving models of fire behavior. We used the Moderate Resolution Imaging Spectroradiometer (MODIS) active fire product (MO(Y)D14) as input to a kriging interpolation to derive continuous maps of the evolution of nine large wildland fires. For each fire, local input parameters for the kriging model were defined using variogram analysis. The accuracy of the kriging model was assessed using high resolution daily fire perimeter data available from the U.S. Forest Service. We also assessed the temporal reporting accuracy of the MODIS burned area products (MCD45A1 and MCD64A1). Averaged over the nine fires, the kriging method correctly mapped 73% of the pixels within the accuracy of a single day, compared to 33% for MCD45A1 and 53% for MCD64A1.

Aqua↗

NASA NTRS2015

An Overview of Production and Validation of the SMAP Passive Soil Moisture Product

The Soil Moisture Active Passive (SMAP) mission is an L-band mission scheduled for launch in Jan. 2015. The SMAP instruments consist of a radar and a radiometer to obtain complementary information from space for soil moisture and freeze/thaw state research and applications. By utilizing novel designs in antenna construction, retrieval algorithms, and acquisition hardware, SMAP provides a capability for global mapping of soil moisture and freeze/thaw state with unprecedented accuracy, resolution, and coverage. This improvement in hydrosphere state measurement is expected to advance our understanding of the processes that link the terrestrial water, energy and carbon cycles, improve our capability in flood prediction and drought monitoring, and enhance our skills in weather and climate forecast. For swath-based soil moisture measurement, SMAP generates three operational geophysical data products: (1) the radiometer-only soil moisture product (L2_SM_P) posted at 36-kilometer resolution, (2) the radar-only soil moisture product (L2_SM_A) posted at 3-kilometers resolution, and (3) the radar-radiometer combined soil moisture product (L2_SM_AP) posted at 9-kilometers resolution. Each product draws on the strengths of the underlying sensor(s) and plays a unique role in hydroclimatological and hydrometeorological applications. A full suite of SMAP data products is given in Table 1.

passive microwave↗

NASA NTRSDate not supplied

Eye Glance Behaviors of Ground Control Station Operators in a Simulated Urban Air Mobility Environment

Research into concepts such as advanced air mobility (AAM) and urban air mobility (UAM) offers an opportunity for successfully and safely adding new classes of vehicles into the National Airspace System. However, a need exists for research into the human factors associated with these concepts. In this paper, we evaluate the gaze behaviors of three remote ground control station operators (GCSOs) conducting simulated UAM operations. The participants monitored and controlled an unmanned aircraft system (UAS) from pre-flight to landing using ground control station (GCS) software across nine scenarios within a remote UAS operations center at NASA Langley Research Center (LaRC). As this work was exploratory, descriptive statistics were calculated to provide some initial insight into GCSO gaze patterns associated with the GCS display. Scenarios that required the operator to directly interact with an airspace scheduling system off-screen resulted in fewer on-screen glances than scenarios that did not include direct interactions with the off-screen system. After investigating several areas of interest (AOIs) within the GCS display, participants primarily viewed three AOIs: the map, vehicle status, and operations checklist. The results yielded several GCS design and operational improvement recommendations to include: (a) adding altitude information to the vehicle icon, (b) adding additional traffic information, and (c) including additional GCS training, to reduce the need to scan an operations checklist, which would allow allocation of visual attention towards other AOIs.

Urban Air Mobility↗

NASA NTRS2023

InVEST Urban Development: Incorporating Earth Observation Data into the Integrated Valuation of Ecosystem Services and Tradeoffs (InVEST) Urban Flood Risk Mitigation Model Python API

Urban flooding poses as one of the biggest issues for cities today as its impacts are amplified by both climate change and urbanization. The Natural Capital Project’s Integrated Valuation of Ecosystem Services and Tradeoffs (InVEST) Urban Flood Risk Mitigation (UFRM) model, which benefits from its simplicity and robustness, is commonly used in NASA DEVELOP projects for disaster mitigation, urban planning, and environmental justice issues. While the InVEST UFRM model was able to produce the surface water runoff and retention map sufficient for the scopes of past projects, the model’s accuracy and spatial variability need improvement. Since the current InVEST UFRM model employs constant rainfall depth for all pixels in the area of interest (AOI), the model suffers from inaccurately estimating rainfall depth, runoff volume, and flood depth. Therefore, we adapted the model so that satellite-based precipitation raster datasets (i.e., Integrated Multi-satellitE Retrievals for Global Precipitation Measurement [GPM IMERG]) can be used instead of a single constant value. We simulated the flood events on August 21st and August 22nd, 2017, in Wyandotte County, Kansas using both our modified and the original InVEST UFRM model and then compared the results after incorporating rainfall raster into the model. Areas with developed land on the land use map predicted moderate to high flood volume in the original volume regardless of the actual amount of precipitation. The modified model considered the rainfall depth’s spatial variation achieving less overestimation of flood runoff and volume at low-to-moderate rainfall area.

Urban flooding↗

DOE OSTI2023

Integrating AlphaFold and deep learning for atomistic interpretation of cryo-EM maps

Abstract Interpretation of cryo-electron microscopy (cryo-EM) maps requires building and fitting 3D atomic models of biological molecules. AlphaFold-predicted models generate initial 3D coordinates; however, model inaccuracy and conformational heterogeneity often necessitate labor-intensive manual model building and fitting into cryo-EM maps. In this work, we designed a protein model-building workflow, which combines a deep-learning cryo-EM map feature enhancement tool, CryoFEM (Cryo-EM Feature Enhancement Model) and AlphaFold. A benchmark test using 36 cryo-EM maps shows that CryoFEM achieves state-of-the-art performance in optimizing the Fourier Shell Correlations between the maps and the ground truth models. Furthermore, in a subset of 17 datasets where the initial AlphaFold predictions are less accurate, the workflow significantly improves their model accuracy. Our work demonstrates that the integration of modern deep learning image enhancement and AlphaFold may lead to automated model building and fitting for the atomistic interpretation of cryo-EM maps.

59 BASIC BIOLOGICAL SCIENCES↗

NASA NTRS1988

Preliminary analysis of Airborne Visible/Infrared Imaging Spectrometer (AVIRIS) for mineralogic mapping at sites in Nevada and Colorado

Airborne Visible/Infrared Imaging Spectrometer (AVIRIS) data for sites in Nevada and Colorado were evaluated to determine their utility for mineralogical mapping in support of geologic investigations. Equal energy normalization is commonly used with imaging spectrometer data to reduce albedo effects. Spectra, profiles, and stacked, color-coded spectra were extracted from the AVIRIS data using an interactive analysis program (QLook) and these derivative data were compared to Airborne Imaging Spectrometer (AIS) results, field and laboratory spectra, and geologic maps. A feature extraction algorithm was used to extract and characterize absorption features from AVIRIS and laboratory spectra, allowing direct comparison of the position and shape of absorption features. Both muscovite and carbonate spectra were identified in the Nevada AVIRIS data by comparison with laboratory and AIS spectra, and an image was made that showed the distribution of these minerals for the entire site. Additional, distinctive spectra were located for an unknown mineral. For the two Colorado sites, the signal-to-noise problem was significantly worse and attempts to extract meaningful spectra were unsuccessful. Problems with the Colorado AVIRIS data were accentuated by the IAR reflectance technique because of moderate vegetation cover. Improved signal-to-noise and alternative calibration procedures will be required to produce satisfactory reflectance spectra from these data. Although the AVIRIS data were useful for mapping strong mineral absorption features and producing mineral maps at the Nevada site, it is clear that significant improvements to the instrument performance are required before AVIRIS will be an operational instrument.

Kruse, Fred A.↗

NASA NTRS2021

Challenges to Aboveground Biomass Prediction from Waveform Lidar

Accurate accounting of aboveground biomass density (AGBD) is crucial for carbon cycle, biodiversity, and climate change science. The Global Ecosystem Dynamics Investigation (GEDI), which maps global AGBD from waveform lidar, is the first of a new generation of Earth observation missions designed to improve carbon accounting. This paper explores the possibility that lidar waveforms may not be unique to AGBD—that forest stands with different AGBD may produce highly similar waveforms—and we hypothesize that non-uniqueness may contribute to the large uncertainties in AGBD predictions. Our analysis integrates simulated GEDI waveforms from 428 in situ stem maps with output from an individual-based forest gap model, which we use to generate a database of potential forest stands and simulate GEDI waveforms from those stands. We use this database to predict the AGBD of the 428 in situ stem maps via two different methods: a linear regression from waveform metrics, and a waveform-matching approach that accounts for waveform-AGBD non-uniqueness. We find that some in situ waveforms are more unique to AGBD than others, which notably impacts AGBD prediction uncertainty (7–411 Mg ha−1, average of 167 Mg ha−1). We also find that forest structure complexity may influence the non-uniqueness effect; stands with low structural complexity are more unique to AGBD than more mature stands with multiple cohorts and canopy layers. These findings suggest that the non-uniqueness phenomena may be introduced by the measuring characteristics of waveform lidar in combination with how forest structure manifests at small scales, and we discuss how this complexity may complicate uncertainty estimation in AGBD prediction. This analysis suggests a limit to the accuracy and precision of AGBD predictions from lidar waveforms seen in empirical studies, and underscores the need for further exploration of the relationships between lidar remote sensing measurements, forest structure, and AGBD.

GEDI↗

DOE OSTI2022

Three-dimensional (3D) velocity map imaging: from technique to application

The velocity map imaging (VMI) technique was first introduced by Eppink and Parker in 1997, as an improvement to the original ion imaging method by Houston and Chandler in 1987. The method has gained huge popularity over the past two decades and has become a standard tool for measuring high-resolution translational energy and angular distributions of ions and electrons. VMI has evolved gradually from 2D momentum measurements to 3D measurements with various implementations and configurations. The most recent advancement has brought unprecedented 3D performance to the technique in terms of resolutions (both spatial and temporal), multi-hit capability as well as acquisition speed while maintaining many attractive attributes afforded by conventional VMI such as being simple, cost-effective, visually appealing and versatile. Here, in this tutorial, we will discuss many technical aspects of the recent advancement and its application in probing correlated chemical dynamics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

NASA NTRS1971

The development of an earth resources information system using aerial photographs and digital computers

Analytical photogrammetry demonstrated that automatic three dimensional mapping of forest terrain was technically feasible. The examples were black and white photography at scales of 1:10,000 and 1:24,000. The major improvement in terrain modelling was the addition of the capability of joining small quadrangles together to form one large model about equal to the effective area of the pair of photographs. Improvements of somewhat lesser importance include: (1) the use of up to 16 grey levels; (2) the elimination of several coordinate transformations; and (3) the annotation of three-tone hysocline maps with elevations.

Amidon, E. L.↗

DOE OSTI2022

Mapping the Universe in hydrogen deuteride

Hydrogen deuteride (HD) is prevalent in a wide variety of astrophysical environments, and measuring its large-scale distribution at different epochs can, in principle, provide information about the properties of these environments. In this paper we explore the prospects for accessing this distribution using line-intensity mapping of emission from the lowest rotational transition in HD, focusing on observations of the epoch of reionization (z~6–10) and earlier. We find the signal from the epoch of reionization to be most promising, through cross correlations within existing [CII] intensity mapping surveys. While the signal we predict is out of reach for current-generation projects, planned future improvements should be able to detect reionization-era HD without any additional observations, and would help to constrain the properties of the star-forming galaxies thought to play a key role in reionization. We also investigate several avenues for measuring HD during “cosmic dawn” (z~10–30), a period in which HD could provide one of the only complementary observables to 21 cm intensity maps. We conclude that existing and planned facilities are poorly matched to the specifications desirable for a significant detection, though such a measurement may be achievable with sustained future effort. Finally, we explain why HD intensity mapping of the intergalactic medium during the cosmic dark ages (z≳30) appears to be out of reach of any conceivable experiment.

79 ASTRONOMY AND ASTROPHYSICS↗

NASA NTRSDate not supplied

New York Ecological Forecasting: Utilizing NASA Earth Observations to Map Ash Distribution and Inform Emerald Ash Borer Control

Since their first sightings in the U.S. in 2002, emerald ash borer beetles (Agrilus planipennis; EAB) have killed millions of native ash (Fraxinus spp.) trees across 35 states. Infected ash stands frequently exhibit complete mortality, with the predicted result being the functional extinction of native ash in U.S. forests. In August of 2020, EAB was discovered in the 6.1-million-acre Adirondack Park. The team’s partners at the Adirondack Park Invasive Plant Program (APIPP) desired ash tree distribution and EAB susceptibility information to help improve EAB bio-control efficiency and apply the methodology to future invasive programs. To assist, the team mapped ash tree distribution using NASA Earth observations from Landsat 7 Enhanced Thematic Mapper Plus (ETM+) and Shuttle Radar Topography Mission (SRTM), along with hyperspectral imagery from the Airborne Visible/Infrared Imaging Spectrometer (AVIRIS). Field data from the Monitoring and Managing Ash (MaMA) project, iMapInvasives and iNaturalist databases, and the New York State Department of Environmental Conservation (NYSDEC) provided ground truthing for mapping and modeling. Results indicate that for ash detection, the team’s Spectral Angle Mapping (SAM) hyperspectral classification is slightly more sensitive but less accurate than multispectral Random Forest (RF) classification, though neither method was above a ~20% detection rate. End products include maps of ash extent derived from both imagery types, a model forecasting future spread scenarios based on current EAB presence, and outreach materials. These products inform APIPP’s management decisions and facilitate public awareness of EAB’s threat to communities within the region.

Liam Megraw↗

NASA NTRS1981

Synergistic relationships among remote-sensing and geophysical media: Geological and hydrological applications

Skylab photographs, side-looking radar imagery, published soil maps, topographic maps, conventional aerial photography as well as LANDSAT imagery under wet and dry changes for several years were analyzed over selected areas in Minnesota to test their usefulness in detecting near-surface ground water. Results show that optical density read from LANDSAT data is not a reliable discriminator of depth to shallow ground water when one band of one scene is used alone, and is little improved when several bands of several scenes are used synergistically. The method is enhanced if information from soil maps is included in the analysis, especially for discriminating boggy ground from better drained areas. It appears, however, that in areas where soil maps and good topographic maps already exist, the depth to ground water can be predicted from those media as well as (if not better than) it can be predicted from remote imagery. The LANDSAT method used demonstrated no capability for recognizing deeper categories of ground water.

Southwick, D. L.↗

NASA NTRS1971

Automatic Computer Mapping of Terrain

Computer processing of 17 wavelength bands of visible, reflective infrared, and thermal infrared scanner spectrometer data, and of three wavelength bands derived from color aerial film has resulted in successful automatic computer mapping of eight or more terrain classes in a Yellowstone National Park test site. The tests involved: (1) supervised and non-supervised computer programs; (2) special preprocessing of the scanner data to reduce computer processing time and cost, and improve the accuracy; and (3) studies of the effectiveness of the proposed Earth Resources Technology Satellite (ERTS) data channels in the automatic mapping of the same terrain, based on simulations, using the same set of scanner data. The following terrain classes have been mapped with greater than 80 percent accuracy in a 12-square-mile area with 1,800 feet of relief; (1) bedrock exposures, (2) vegetated rock rubble, (3) talus, (4) glacial kame meadow, (5) glacial till meadow, (6) forest, (7) bog, and (8) water. In addition, shadows of clouds and cliffs are depicted, but were greatly reduced by using preprocessing techniques.

Smedes, H. W.↗

NASA NTRS1993

Geostatistical evaluation of satellite radar altimetry for high-resolution mapping of Lambert Glacier, Antarctica

The potential of satellite radar altimetry for high-resolution mapping of Antarctic ice streams is evaluated, using retracked and slope-corrected data from the Lambert Glacier and Amery Ice Shelf area, East Antarctica, acquired by Geosat during the Exact Repeat Mission (ERM), 1986-89. The map area includes lower Lambert Glacier north of 72.18 deg S, the southern Amery Ice Shelf, and the grounded inland ice sheet on both sides. The Geosat ERM altimetry is found to provide substantially more complete coverage than the 1978 Seasat altimetry, due to improved tracking. Variogram methods are used to estimate the noise levels in the data as a function of position throughout the map area. The spatial structure in the data is quantified by constructing experimental variograms using altimetry from the area of the grounding zone of Lambert Glacier, which is the area chiefly of interest in this topographically complex region. Kriging is employed to invert the along-track height measurements onto a fine-scale 3 km grid. The unsmoothed along-track Geosat ERM altimetry yields spatially continuous maps showing the main topographic features of lower Lambert Glacier, upper Amery Ice Shelf and the adjacent inland ice sheet. The probable position of the grounding line of Lambert Glacier is identified from a break in slope at the grounded ice/floating ice transition. The approximate standard error of the kriged map is inferred from the data noise levels.

Herzfeld, Ute C.↗

NASA NTRS2024

High-Resolution Mapping of Nitrogen Oxide Emissions in Large US Cities From TROPOMI Retrievals of Tropospheric Nitrogen Dioxide Columns

Satellite-derived spatiotemporal patterns of nitrogen oxide (NO x ) emissions can improve accuracy of emission inventories to better support air quality and climate research and policy studies. In this study, we develop a new method by coupling the chemical transport Model-Independent SATellite-derived Emission estimation Algorithm for Mixed-sources (MISATEAM) with a divergence method to map high-resolution NO x emissions across US cities using TROPOspheric Monitoring Instrument (TROPOMI) tropospheric nitrogen dioxide (NO 2 ) retrievals. The accuracy of the coupled method is validated through application to synthetic NO 2 observations from the NASA-Unified Weather Research and Forecasting (NU-WRF) model, with a horizontal spatial resolution of 4 km × 4 km for 33 large and mid-size US cities. Validation reveals excellent agreement between inferred and NU-WRF-provided emission magnitudes (R= 0.99, normalized mean bias, NMB = −0.01) and a consistent spatial pattern when comparing emissions for individual grid cells (R=0.88 ± 0.06). We then develop a TROPOMI-based database reporting annual emissions for 39 US cities at a horizontal spatial resolution of 0.05° × 0.05° from 2018 to 2021. This database demonstrates a strong correlation (R= 0.90) with the National Emission Inventory (NEI) but reveals some bias (NMB = −0.24). There are noticeable differences in the spatial patterns of emissions in some cities. Our analysis suggests that uncertainties in TROPOMI-based emissions and potential misallocation of emissions and/or missing sources in bottom-up emission inventories both contribute to these differences.

NOx emissions↗