Spacecraft S-band 10-100 W RF amplifier tubes
Spacecraft S band power amplifier TWT electrical, environmental and life tests under saturated conditions
SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Spacecraft S band power amplifier TWT electrical, environmental and life tests under saturated conditions
Mercury bombardment ion thrustor life test in space environment onboard space electric rocket test /SERT/ satellite, describing passive satellite thermal control system design
Mariner Mars 1971 gimbal actuator design and life test for autopilot system using hypergolic bipropellant rocket engine
Concentric tube resistojet life tested on hydrogen and ammonia propellants for use with biowaste propellants
Table yields best linear invariant /BLI/ estimates for log of reliable life under censored life tests, permitting reliability estimations in failure analysis of items with multiple flaws. These BLI estimates have uniformly smaller expected loss than Gauss-Markov best linear unbiased estimates.
Accelerated life test models, criteria for model selection, and extrapolation in overstress models
Performance and life tests of nonfueled and UO2-fueled cylindrical thermionic converter
Service and shelf life tests of radiation survey meter and personal radiation dosimeter battery packs used on Apollo spacecraft
SNAP 19 TAGS thermoelectric generator life tests at high temperature in Ar, predicting long term performance including thermoelectric material and isotope fuel decay effects
The development and fabrication of a quantity of long life magnetic tape with properties selected specifically for unattended operation in spacecraft tape recorders was studied. A detailed analytical consideration of various binder systems was undertaken. This included the chemical aspects of the binders, cohesion and adhesion effects, stability and the mechanical and physical properties. The ability to form free films of these polymers and their combination with various oxide loadings and other additives allowed a rapid selection of four polymer candidates for a five year magnetic tape. Samples were evaluated under actual running conditions which included physical, magnetic, and extensive life testing. These sample tapes withstood 50,000 bidirectional tape passes under fairly harsh operating conditions.
Supposedly long-lived nickel-cadmium batteries often fail due to severe gassing on charge. In order to increase the lives of such cells attempts are being made to construct nongassing positive and negative electrodes. The gassing characteristics of both electrodes in negative limited cells were determined as a function of charge rate, charge temperature, and loading. Cycle life tests, up to 70 cycles, of some of the cells show they operate in a nongassing manner with very low degradation rates.
Service life tests of LC-8 and LC-9 carbide-fueled thermionic converters are discussed. Post operational tests of the converters to show emitter diametric change, microstructures of cladding and fuel, and analysis of fuel composition are described. The fabrication and performance of high temperature thermocouples used in the test procedures are included.
The use of microchannel plates as focal plane readout devices and the evaluation of mirrors for X-ray telescopes applied to stellar X-ray imaging is discussed. The microchannel plate outputs were either imaged on a phosphor screen which was viewed by a low light level vidicon or on a wire array which was read out by digitally processing the output of a charge division network attached to the wires. A service life test which was conducted on two image intensifiers is described.
Description of the thrusting performance of a 10-mlb thrust, concentric-tubes biowaste resistojet, which was life tested on hydrogen and ammonia propellants for 8000 hours. Thrusting performance is presented for H2, H2O, CH4, and CO2 as well as typical biopropellant mixtures CO2-CH4, H2O-CH4 and CO2-H2O. Using Pt-Ir alloy heater tubes, 235 and 575 seconds were obtained for water and hydrogen propellants. Overall total power efficiencies were 66%, which includes losses for a preevaporator close-coupled for the water tests. Vibration to 1.0 sq q/Hz with an overall G rms of 36, shock at 30 g's and acceleration to 8 g's simulating a launch were passed by the thrustor.
For life testing procedures, a Bayesian analysis is developed with respect to a random intensity parameter in the Poisson distribution. Bayes estimators are derived for the Poisson parameter and the reliability function based on uniform and gamma prior distributions of that parameter. A Monte Carlo procedure is implemented to make possible an empirical mean-squared error comparison between Bayes and existing minimum variance unbiased, as well as maximum likelihood, estimators. As expected, the Bayes estimators have mean-squared errors that are appreciably smaller than those of the other two.
The framework of a new method is outlined for treating creep-fatigue behavior of metals. Inelastic strain-ranges are partitioned into the components of (1) completely reversed plasticity, (2) tensile plasticity reversed by compressive creep, or tensile creep reversed by compressive plasticity, and (3) completely reversed creep. Each of these components is shown to be related to cyclic life by a Manson-Coffin type power-law equation. A linear life fraction rule is used to combine the damaging effects of the individual components enabling the prediction of life. Test results are presented for a 2.25 Cr-1 Mo steel as well as limited information for a Type 316 stainless steel.
A program was initiated to develop improved types of terminal seals for aerospace Ni-Cd batteries. The approach used has not involved attempts, such as employed elsewhere, to improve the ceramic-to-metal seal that is now extensively employed for this application. Rather the approach has been directed toward the development and evaluation of new types of seals. Of prime interest in this initial investigation has been the Ziegler type of compression seal and in particular the injection molded version developed by the Bell Telephone Laboratories (BTL). A number of these units were designed, fabricated, and evaluated on an accelerated life test under a simulated battery environment. Results have shown that there are no major problems involved in scaling up the BTL small-size (5-amp) seal to a larger size (up to 50-amp) seal suitable for most JPL flight batteries. Five out of five such seals successfully completed over 10 months of continuous thermal cycling without developing any leaks greater than 1.8 x to 10 to the minus 9th power atm-cc-He/s.
Major achievements and accomplishments are reported for the Physiology of Chimpanzees in Orbit Program. Scientific studies relate to behavior and physiology, and engineering studies cover telemetry, behavioral training, systems tests, life support subsystems, and program plan.