SEARCH · Engineering Papers

Results for “layered materials”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44

All sources NASA NTRS DOE OSTI

DOE OSTI2023

Model-Based Reconstruction for Multi-Frequency Collimated Beam Ultrasound Systems

Collimated beam ultrasound systems are a technology for imaging inside multi-layered structures such as geothermal wells. These systems work by using a collimated narrow-band ultrasound transmitter that can penetrate through multiple layers of heterogeneous material. A series of measurements can then be made at multiple transmit frequencies. However, commonly used reconstruction algorithms such as Synthetic Aperture Focusing Technique (SAFT) tend to produce poor quality reconstructions for these systems both because they do not model collimated beam systems and they do not jointly reconstruct the multiple frequencies. Here, in this article, we propose a multi-frequency ultrasound model-based iterative reconstruction (UMBIR) algorithm designed for multi-frequency collimated beam ultrasound systems. The combined system targets reflective imaging of heterogeneous, multi-layered structures. For each transmitted frequency band, we introduce a physics-based forward model to accurately account for the propagation of the collimated narrow-band ultrasonic beam through the multi-layered media. We then show how the joint multi-frequency UMBIR reconstruction can be computed by modeling the direct arrival signals, detector noise, and incorporating a spatially varying image prior. Results using both simulated and experimental data indicate that multi-frequency UMBIR reconstruction yields much higher reconstruction quality than either single frequency UMBIR or SAFT.

47 OTHER INSTRUMENTATION↗

DOE OSTI2025

First-Principles Assessment of ZnTe and CdSe as Prospective Tunnel Barriers at the InAs/Al Interface

Majorana zero modes are predicted to emerge in semiconductor/ superconductor interfaces, such as InAs/Al. Majorana modes could be utilized for fault tolerant topological qubits. However, their realization is hindered by materials challenges. The coupling between the superconductor and the semiconductor may be too strong for Majorana modes to emerge, due to effective doping of the semiconductor by the metallic contact. This could be mediated by adding a tunnel barrier of controlled thickness. We use density functional theory (DFT) with Hubbard U corrections, whose values are machine-learned via Bayesian optimization (BO), to assess ZnTe and CdSe as prospective tunnel barriers for the InAs/Al interface. The results of DFT +U(BO) for ZnTe are validated by comparison to angle resolved photoemission spectroscopy (ARPES). We then study bilayer interfaces of the three semiconductors with each other and with Al, as well as trilayer interfaces with a varying number of ZnTe or CdSe layers inserted between InAs and Al. We find that 16 atomic layers of either material completely insulate the InAs from metal induced gap states (MIGS). However, ZnTe and CdSe differ significantly in their band alignment, such that ZnTe forms an effective barrier for electrons, whereas CdSe forms a barrier for holes. Because of Fermi level pinning in the conduction band at the interface, only electron transport is relevant for InAs-based Majorana devices. Therefore, ZnTe is the better choice. Based on the results of our simulations, we suggest conducting experiments with ZnTe barriers in the thickness range of 6–18 atomic layers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2022

Insulated exhaust port liner for a cylinder head assembly of a motor vehicle

An insulated exhaust port liner of a cylinder head assembly for fluidly connecting to an internal combustion engine of a motor vehicle includes a sealing layer. The sealing layer has a first surface defining a passage for fluidly connecting to the internal combustion engine and receiving exhaust gas. The sealing layer further includes a second surface opposite to the first surface. The liner further includes a thermal barrier layer coated onto the second surface of the sealing layer. The thermal barrier layer is a porous non-woven material for supporting the sealing layer on the cylinder head and reducing a transfer of heat from the sealing layer to the cylinder head.

Andruskiewicz, IV, Peter P.↗

DOE OSTI2023

Spin-based detection of terahertz and sub-terahertz electromagnetic radiation

Systems and methods for spin-based detection of electromagnetic radiation at terahertz and sub-terahertz frequencies is provided. The detector can include a heterostructure, a magnetic field generator, and an electrical circuit. The heterostructure can include a first layer formed of an antiferromagnetic material (AFM) in contact with a second layer of a heavy metal (HM) or a topological insulator. The magnetic field generator can generate a magnetic field oriented approximately parallel to an easy axis of the first layer and approximately parallel to a propagation direction of electromagnetic radiation. The circuit can be in electrical communication with the second layer. The first layer can inject a spin current into the second layer in response to receipt of electromagnetic radiation having a sub-terahertz or terahertz frequency. The second layer can convert the injected spin current into a potential difference. The circuit can be configured to output a signal corresponding to the potential difference.

Shi, Jing↗

DOE OSTI2024

Uncovering the predictive pathways of lithium and sodium interchange in layered oxides

Ion exchange is a powerful method to access metastable materials with advanced functionalities for energy storage applications. However, high concentrations and unfavourably large excesses of lithium are always used for synthesizing lithium cathodes from parent sodium material, and the reaction pathways remain elusive. Here, using layered oxides as model materials, we demonstrate that vacancy level and its corresponding lithium preference are critical in determining the accessible and inaccessible ion exchange pathways. Taking advantage of the strong lithium preference at the right vacancy level, we establish predictive compositional and structural evolution at extremely dilute and low excess lithium based on the phase equilibrium between Li 0.94 CoO 2 and Na 0.48 CoO 2 . Such phase separation behaviour is general in both surface reaction-limited and diffusion-limited exchange conditions and is accomplished with the charge redistribution on transition metals. Guided by this understanding, we demonstrate the synthesis of Na y CoO 2 from the parent Li x CoO 2 and the synthesis of Li 0.94 CoO 2 from Na y CoO 2 at 1-1,000 Li/Na (molar ratio) with an electrochemical assisted ion exchange method by mitigating the kinetic barriers. Our study opens new opportunities for ion exchange in predictive synthesis and separation applications. Ion exchange is a powerful method to access metastable materials for energy storage, but identifying lithium and sodium interchange in layered oxides remains challenging. Using such model materials, vacancy level and corresponding lithium preference are shown to be crucial for ion exchange pathway accessibility.

25 ENERGY STORAGE↗

DOE OSTI2024

Selected Area Manipulation of MoS 2 via Focused Electron Beam-Induced Etching for Nanoscale Device Editing

Here we demonstrate direct-write patterning of single and multilayer MoS 2 via a focused electron beam-induced etching (FEBIE) process mediated with the XeF 2 precursor. MoS 2 etching is performed at various currents, areal doses, on different substrates, and characterized using scanning electron and atomic force microscopies as well as Raman and photoluminescence spectroscopies. Scanning transmission electron microscopy reveals a sub-40 nm etching resolution and the progression of point defects and lateral etching of the consequent unsaturated bonds. The results confirm that the electron beam-induced etching process is minimally invasive to the underlying material in comparison to ion beam techniques, which damage the subsurface material. Single-layer MoS 2 field-effect transistors are fabricated, and device characteristics are compared for channels that are edited via the selected area etching process. The source–drain current at constant gate and source–drain voltage scale linearly with the edited channel width. Moreover, the mobility of the narrowest channel width decreases, suggesting that backscattered and secondary electrons collaterally affect the periphery of the removed area. Focused electron beam doses on single-layer transistors below the etching threshold were also explored as a means to modify/thin the channel layer. The FEBIE exposures showed demonstrative effects via the transistor transfer characteristics, photoluminescence spectroscopy, and Raman spectroscopy. While strategies to minimize backscattered and secondary electron interactions outside of the scanned regions require further investigation, here, we show that FEBIE is a viable approach for selective nanoscale editing of MoS 2 devices.

36 MATERIALS SCIENCE↗

DOE OSTI2022

Effect of the grain arrangements on the thermal stability of polycrystalline nickel-rich lithium-based battery cathodes

One of the most challenging aspects of developing high-energy lithium-based batteries is the structural and (electro)chemical stability of Ni-rich active cathode materials at thermally-abused and prolonged cell cycling conditions. Here, we report in situ physicochemical characterizations to improve the fundamental understanding of the degradation mechanism of charged polycrystalline Ni-rich cathodes at elevated temperatures (e.g., ≥ 40 °C). Using multiple microscopy, scattering, thermal, and electrochemical probes, we decouple the major contributors for the thermal instability from intertwined factors. Our research work demonstrates that the grain microstructures play an essential role in the thermal stability of polycrystalline lithium-based positive battery electrodes. We also show that the oxygen release, a crucial process during battery thermal runaway, can be regulated by engineering grain arrangements. Furthermore, the grain arrangements can also modulate the macroscopic crystallographic transformation pattern and oxygen diffusion length in layered oxide cathode materials.

36 MATERIALS SCIENCE↗

DOE OSTI2024

Generation of out-of-plane ferroelectric behavior in a one-atom-thick monolayer

Ferroelectricity with out-of-plane polarization has so far been found in several two-dimensional (2D) materials, including monolayers comprising three to five planes of atoms, e.g. α-In 2 Se 3 and MoTe 2 . Here, we explore the generation of out-of-plane polarization within a one-atom-thick monolayer material, namely hexagonal boron nitride. We performed density-functional-theory calculations to explore inducing ferroelectric-like distortions through incorporation of isovalent substitutional impurities that are larger than the host atoms. This disparity in bond lengths causes a buckling of the h-BN, either up or down, which amounts to a dipole with two equivalent energies and opposing orientations. We tested several impurities to explore the magnitude of the induced dipole and the switching energy barrier for dipole inversion. The effects of strain, dipole–dipole interactions, and vertical heterostructures with graphene are further explored. Our results suggest a highly-tunable system with ground state antiferroelectricity and metastable ferroelectricity. Finally, we expect that this work will help foster new ways to include functionality in layered 2D-material-based applications.

36 MATERIALS SCIENCE↗

DOE OSTI2021

Biocompatible Electrostatic Layered Systems for Viral Elimination in the Nose/Throat

An anti-viral coating for the nose & throat is needed to quickly address the spread of COVID-19 infections and to aid future pandemics. Current nasal delivery systems are typically a 1-spray homogenous solution, which is convenient but may not be as efficient or durable as a multi-spray solution that contains a binding layer to anchor the anti-viral components. Many of the current nasal solutions being investigated to aid in pandemic response have solution-based mechanisms of action and are quickly cleared from the nose/mouth limiting their efficacy lifetime. A multi-spray approach utilizing strong intermolecular forces between polymeric materials and anti-viral agents to provide a robust biocompatible coating is expected to have increased physical and chemical properties to combat viral infection. This work evaluated which tailored biocompatible materials are needed to generate a layered system to combat viral infection. This layered system takes advantage of electrostatic interactions to bind anti-viral components, shown in Figure 1. Proof of concept success was demonstrated through cell toxicity studies and anti-viral assays on both the individual layer components and the complete layered system. Project work began with chemical modifications of Xantham Gum to hydrolyzing xanthan gum to give a negatively charged polymer with varying degrees of ionic character and investigate bonding efficiencies. However, this was abandoned in favor of comparing COTS available materials listed in Table 1 (Results section). Concentration and adhesion studies were performed on layers created using the listed polymeric materials and anti-viral agents. Finally, biocompatibility of materials, layers, and coating system were confirmed through cytotoxicity studies and the efficacy of the anti-viral properties tested with phi6 bacteriophage as a SARS-CoV2 surrogate.

36 MATERIALS SCIENCE↗

DOE OSTI2022

Two-dimensional parametric design of short pulse laser driven iron opacity experiments

High intensity short pulse lasers are commonly used to create high temperature and high density plasmas. These plasmas are used to study fundamental properties such as the equation of state and opacity. The targets often use small-diameter, thin buried layers of the materials of interest, surrounded by a tamper of low atomic number material such as plastic. Computational modeling is used to design and interpret experiments with short pulse lasers. Most of the modeling to date has assumed one-dimensional plane-parallel geometry. In this paper, the effects of radial gradients in the irradiation of thin planar targets are studied with one- and two-dimensional radiation/hydrodynamic simulations. It is found that the main effect of radial gradients is the averaging of plasma conditions and x-ray emission over the pattern of irradiation. Additionally, differences between one- and two-dimensional simulations arise because the plasma conditions and x-ray emission are, in general, nonlinear functions of the temperature of the plasma and thereby also nonlinear functions of the irradiation intensity. The differences increase with the ratio of the buried layer radius to the laser spot radius. The root mean square difference in the inferred iron L-shell opacity is less than 30% when the ratio is less than 1.0 and about 70% when the ratio is 1.5.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2025

FCET Solid Oxide Fuel Cell Testing and Development (CRADA 526) (Final Report)

Pacific Northwest National Laboratory (PNNL) tested electrolyte coatings from Fuel Cell Enabling Technologies, Inc. (FCET) for use in solid oxide fuel cells (SOFCs). The key technology held by FCET is a process to deposit thin layers of oxide materials, less than 1 μm in thickness. The range of possible materials that can be deposited with their method is broad, but this project focused on the gadolinium-doped ceria (GDC) and yttria-stabilized zirconia (YSZ) electrolytes for SOFCs. Thin, gas tight electrolyte membranes have been a long-sought target in SOFC research. The thinner the electrolyte, the lower the cell resistance, and the higher performance of the cell (or the lower the operating temperature). A YSZ thickness of 1 μm would be a step change from the state-of-the-art, tape-cast electrolytes (~10 μm). An in-house prototype SOFC stack from FCET was first tested. The sealing geometry of the prototype stack was determined to be problematic, and testing shifted to button cells. Anode-supported solid oxide electrolysis cell (SOEC) button cells without an electrolyte layer were produced at PNNL and sent to FCET for coating with electrolyte. Three cells were tested with a gadolinium-doped ceria (GDC) electrolyte applied via spin coating. GDC was chosen for its conductivity at lower temperatures than YSZ. All three cells failed during initial reduction under hydrogen at 600°C. Testing then shifted to YSZ, which is the standard SOFC electrolyte. Several button cells were coated with YSZ and examined with scanning electron microscopy (SEM). A promising coating of ~1 mm thickness was observed under SEM. A similarly coated button cell was tested and failed similarly to previous tests during reduction at 600°C. The YSZ coating appeared dense and uniform in SEM analysis. The roughness of the underlying Ni/YSZ anode is on the order of 1 μm, and that may have compromised the gas-tightness of the coating. Further development is warranted to understand and refine the coating process. Thin YSZ applied via this spin-coating technique could be used as a low-cost, drop-in replacement in large-scale SOFC manufacturing processes, improving cell performance and lowering the cost per watt of SOFCs.

30 DIRECT ENERGY CONVERSION↗

DOE OSTI2024

Multifunctional Nanofiber Reinforcement for Improved Thermomechanical and Chemical Stability of Perovskite Solar Cells

This project focused on the development of metal halide perovskite-polymeric nanofiber nanocomposites for robust and efficient solar cells. Metal halide perovskite solar cells are a potentially disruptive technology with high efficiencies and low-cost solution processability amenable with roll-to-roll fabrication of flexible devices. However, perovskites exhibit extreme brittleness, high internal film stresses, and chemical instabilities that significantly limit service lifetimes under normal operating conditions. To date, most work addressing these shortcomings has been focused on encapsulating devices between thick layers of rigid materials such as glass, which increases the total weight and cost of devices. Furthermore, these rigid and heavy encapsulants do not translate well to emerging solar markets vital for national security, including integrated mobile power, emergency deployments for disaster relief and military engagement, and lightweight power for space. It is therefore critical to improve the thermomechanical and chemical stability of perovskite devices in a way that is compatible with flexible and lightweight substrates. In this project, we integrated nylon-6,6 nanofibers into MAPbI3 to mechanically reinforce the perovskite, demonstrating films that exhibited fracture energies 5-fold greater than pristine MAPbI3 while also maintaining similar power conversion efficiencies due to beneficial light scattering effects from the polymeric nanofibers. These results required successful development of approaches to control the deposition thickness of nanofiber mats down to 100s of nanometers, and to ensure the polymer nanofibers did not inhibit charge transport to the at the perovskite-transport layer interface.

14 SOLAR ENERGY↗

DOE OSTI2024

Uncovering the phonon spectra and lattice dynamics of plastically deformable InSe van der Waals crystals

Stacking two-dimensional (2D) van der Waals (vdW) materials in a layered bulk structure provides an appealing platform for the emergence of exotic physical properties. As a vdW crystal with exceptional plasticity, InSe offers the opportunity to explore various effects arising from the coupling of its peculiar mechanical behaviors and other physical properties. Here, we employ neutron scattering techniques to investigate the correlations of plastic interlayer slip, lattice anharmonicity, and thermal transport in InSe crystals. Not only are the interlayer slip direction and magnitude well captured by shifts in the Bragg reflections, but we also observe a deviation from the expected Debye behaviour in the heat capacity and lattice thermal conductivity. Combining the experimental data with first-principles calculations, we tentatively attribute the observed evidence of strong phonon-phonon interactions to a combination of a large acoustic-optical frequency resonance and a nesting effect. These findings correlate the macroscopic plastic slip and the microscopic lattice dynamics, providing insights into the mechano-thermo coupling and modulation in 2D vdW materials.

36 MATERIALS SCIENCE↗

DOE OSTI2024

Increased accuracy and signal-to-noise ratio through recent improvements in infra-red video bolometer fabrication and calibration

The infra-red video bolometer (IRVB) is a diagnostic equipped with an infra-red camera that measures the total radiated power in thousands of lines of sight within a large field of view. Recently validated in MAST-U [Fderici et al., Rev. Sci. Instrum. 94, 033502 (2023)], it offers a high spatial resolution map of the radiated power in the divertor region, where large gradients are expected. The IRVB’s sensing element comprises a thin layer of high Z absorbing material, typically platinum, usually coated with carbon to reduce reflections [Peterson et al., Rev. Sci. Instrum. 79, 10E301 (2008)].Here, the possibility of using a relatively inert material such as titanium, is explored that can be produced in layers up to 1 μm compared to 2.5 μm for Pt and then coat it with Pt of the desired thickness (0.3 μm per side here) and carbon. This leads to a higher temperature signal (about 3 times) and better spatial resolution (about 4 times), resulting in higher accuracy in the measured power [Peterson et al., Rev. Sci. Instrum. 79, 10E301 (2008)]. This assembly is also expected to improve foil uniformity, as the Pt layer is obtained via deposition rather than mechanical processes [Mukai et al., Rev. Sci. Instrum. 87, 2014 (2016)].Given its multi-material composition, measuring the thermal properties of the foil assembly is vital. Various methods using a calibrated laser as a heat source have been developed, analyzing the temperature profile shape [Sano et al., Plasma and Fusion Res. 7, 2405039 (2012)] and [Mukai et al., Rev. Sci. Instrum. 89, 10E114 (2018)] or fitting the calculated laser power for different intensities and frequencies [Fderici et al., Rev. Sci. Instrum. 94, 033502 (2023)]. Here, a simpler approach is presented, which relies on analyzing the separate components of the foil heat equation for a single laser exposure in a given area. This can then be iterated over the entire foil to capture local deviations.

Magnetic Fusion Energy↗

DOE OSTI2020

Mitigating leaks in membranes

Two-dimensional material based filters, their method of manufacture, and their use are disclosed. In one embodiment, a membrane may include an active layer including a plurality of defects and a deposited material associated with the plurality of defects may reduce flow therethrough. Additionally, a majority of the active layer may be free from the material. In another embodiment, a membrane may include a porous substrate and an atomic layer deposited material disposed on a surface of the porous substrate. The atomic layer deposited material may be less hydrophilic than the porous substrate and an atomically thin active layer may be disposed on the atomic layer deposited material.

36 MATERIALS SCIENCE↗

DOE OSTI2023

Mitigating leaks in membranes

Karnik, Rohit N.↗

DOE OSTI2022

Enabling high energy lithium metal batteries via single-crystal Ni-rich cathode material co-doping strategy

High-capacity Ni-rich layered oxides are promising cathode materials for secondary lithium-based battery systems. However, their structural instability detrimentally affects the battery performance during cell cycling. Here, we report an Al/Zr co-doped single-crystalline LiNi<:sub>0.88 Co 0.09 Mn 0.03 O 2 (SNCM) cathode material to circumvent the instability issue. We found that soluble Al ions are adequately incorporated in the SNCM lattice while the less soluble Zr ions are prone to aggregate in the outer SNCM surface layer. The synergistic effect of Al/Zr co-doping in SNCM lattice improve the Li-ion mobility, relief the internal strain, and suppress the Li/Ni cation mixing upon cycling at high cut-off voltage. These features improve the cathode rate capability and structural stabilization during prolonged cell cycling. In particular, the Zr-rich surface enables the formation of stable cathode-electrolyte interphase, which prevent SNCM from unwanted reactions with the non-aqueous fluorinated liquid electrolyte solution and avoid Ni dissolution. To prove the practical application of the Al/Zr co-doped SNCM, we assembled a 10.8 Ah pouch cell (using a 100 μm thick Li metal anode) capable of delivering initial specific energy of 504.5 Wh kg- 1 at 0.1 °C and 25 °C.

25 ENERGY STORAGE↗

DOE OSTI2022

Discovery of Graphene-Water Membrane Structure: Toward High-Quality Graphene Process

It is widely accepted that solid-state membranes are indispensable media for the graphene process, particularly transfer procedures. But these membranes inevitably bring contaminations and residues to the transferred graphene and consequently compromise the material quality. This study reports a newly observed free-standing graphene-water membrane structure, which replaces the conventional solid-state supporting media with liquid film to sustain the graphene integrity and continuity. Experimental observation, theoretical model, and molecular dynamics simulations consistently indicate that the high surface tension of pure water and its large contact angle with graphene are essential factors for forming such a membrane structure. More interestingly, water surface tension ensures the flatness of graphene layers and renders high transfer quality on many types of target substrates. This report enriches the understanding of the interactions on reduced dimensional material while rendering an alternative approach for scalable layered material processing with ensured quality for advanced manufacturing.

36 MATERIALS SCIENCE↗