Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “land surface temperature”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44
All sourcesNASA NTRSDOE OSTI
NASA NTRS1982

A comparison between satellite-defined and parameterized land-water differences in emitted longwave radiation

An analysis is performed to qualitatively compare the seasonal variation in emitted longwave radiation over land and over water areas as determined from 12 months of Nimbus 6 satellite data with that defined from parameterizations of this radiation budget component. These variations are noted when land and water surface areas are mapped to corresponding areas at the 'top' of the atmosphere. Variations of a surface-temperature-dependent parameterization of emitted longwave radiation originally suggested by Budyko (1969) are considered. The longwave radiation parameterizations indicate small differences between land and water profiles of emitted longwave radiation at the top of an atmospheric column in low latitudes in comparison to large differences in this feature shown to exist in the satellite data. The small differences are noted in linear parameterizations of emitted flux when zonally-averaged satellite data are used to define equation coefficients.

Stephenson-Graves, D.↗
NASA NTRS2009

Surface Emissivity Retrieved with Satellite Ultraspectral IR Measurements for Monitoring Global Change

Surface and atmospheric thermodynamic parameters retrieved with advanced ultraspectral remote sensors aboard Earth observing satellites are critical to general atmospheric and Earth science research, climate monitoring, and weather prediction. Ultraspectral resolution infrared radiance obtained from nadir observations provide atmospheric, surface, and cloud information. Presented here is the global surface IR emissivity retrieved from Infrared Atmospheric Sounding Interferometer (IASI) measurements under "clear-sky" conditions. Fast radiative transfer models, applied to the cloud-free (or clouded) atmosphere, are used for atmospheric profile and surface parameter (or cloud parameter) retrieval. The inversion scheme, dealing with cloudy as well as cloud-free radiances observed with ultraspectral infrared sounders, has been developed to simultaneously retrieve atmospheric thermodynamic and surface (or cloud microphysical) parameters. Rapidly produced surface emissivity is initially evaluated through quality control checks on the retrievals of other impacted atmospheric and surface parameters. Surface emissivity and surface skin temperature from the current and future operational satellites can and will reveal critical information on the Earth s ecosystem and land surface type properties, which can be utilized as part of long-term monitoring for the Earth s environment and global climate change.

Zhou, Daniel K.↗
DOE OSTI2022

Soil temperature mitigation due to vegetation biophysical feedbacks

Understanding the interactions between temperature regimes and vegetation cover is one of the key scientific topics in global environmental change and land surface process research. Recently, the prominent global greening trend has inspired considerable interest in examining climate feedbacks to vegetation changes. However, the impacts of recent widespread vegetation cover changes on soil temperature have been less documented and have received insufficient attention. Here, a high-resolution regional climate model was used to examine the potential impact of vegetation cover changes over the past 37 years, obtained as satellite observational data, on regional air and soil temperatures across the Heilong-Amur River Basin. Our sensitivity experiments indicated that the 1.85% increase in the regional fractional vegetation cover (FVC) from 1982 to 2018 cooled the air temperature by 0.045°C and the soil temperature by 0.19°C and that this cooling effect would continue in the near future, from 2016-2018 to 2051-2053. We found that soil temperatures were more sensitive to vegetation cover changes than air temperatures, particularly in mid-high latitude forest ecosystems; this finding helps to explain the nonsignificant decrease in soil temperatures in forest ecosystems over the past 40 years detected in the ERA5-Land reanalysis. Further, our results also suggest that vegetation restoration in forest ecosystems could mitigate the effects of climate change on permafrost environments by increasing the number of soil freezing days.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS2003

Land Use and Land Cover Change, Urban Heat Island Phenomenon, and Health Implications: A Remote Sensing Approach

Land use and land cover maps of Atlanta Metropolitan Area in Georgia were produced from Landsat MSS and TM images for 1973,1979,1983,1987,1992, and 1997, spanning a period of 25 years. Dramatic changes in land use and land cover have occurred with loss of forest and cropland to urban use. In particular, low-density urban use, which includes largely residential use, has increased by over 119% between 1973 and 1997. These land use and land cover changes have drastically altered the land surface characteristics. An analysis of Landsat images revealed an increase in surface temperature and a decline in NDVI from 1973 to 1997. These changes have forced the development of a significant urban heat island effect and an increase in ground level ozone production to such an extent, that Atlanta has violated EPA's ozone level standard in recent years. The urban heat island initiated precipitation events that were identified between 1996 and 2000 tended to occur near high-density urban areas but outside the I-285 loop that traverses around the Central Business District, i.e. not in the inner city area, but some in close proximity to the highways. The health implications were investigated by comparing the spatial patterns of volatile organic compounds (VOC) and nitrogen oxides (NOx) emissions, the two ingredients that form ozone by reacting with sunlight, with those of rates of cardiovascular and chronic lower respiratory diseases. A clear core-periphery pattern was revealed for both VOC and NOx emissions, but the spatial pattern was more random in the cases of rates of cardiovascular and chronic lower respiratory diseases. Clearly, factors other than ozone pollution were involved in explaining the rates of these diseases. Further research is therefore needed to understand the health geography and its relationship to land use and land cover change as well as urban heat island effect. This paper illustrates the usefulness of a remote sensing approach for this purpose.

Lo, C. P.↗
NASA NTRS2013

Connecting Satellite Observations with Water Cycle Variables Through Land Data Assimilation: Examples Using the NASA GEOS-5 LDAS

A land data assimilation system (LDAS) can merge satellite observations (or retrievals) of land surface hydrological conditions, including soil moisture, snow, and terrestrial water storage (TWS), into a numerical model of land surface processes. In theory, the output from such a system is superior to estimates based on the observations or the model alone, thereby enhancing our ability to understand, monitor, and predict key elements of the terrestrial water cycle. In practice, however, satellite observations do not correspond directly to the water cycle variables of interest. The present paper addresses various aspects of this seeming mismatch using examples drawn from recent research with the ensemble-based NASA GEOS-5 LDAS. These aspects include (1) the assimilation of coarse-scale observations into higher-resolution land surface models, (2) the partitioning of satellite observations (such as TWS retrievals) into their constituent water cycle components, (3) the forward modeling of microwave brightness temperatures over land for radiance-based soil moisture and snow assimilation, and (4) the selection of the most relevant types of observations for the analysis of a specific water cycle variable that is not observed (such as root zone soil moisture). The solution to these challenges involves the careful construction of an observation operator that maps from the land surface model variables of interest to the space of the assimilated observations.

Land data assimilation↗
NASA NTRSDate not supplied

Hawaii Water Resources: Monitoring the Impact of Land-Based Sources of Pollution on Water Quality Along the Coast of West Maui, Hawai'i, to Assess Coral Reef Condition

West Maui is at risk of losing ecosystem services provided by coral reefs due to land-based sources of pollution (LBSP). In 2011, the US Coral Reef Task Force (USCRTF) identified the West Maui watershed as a priority watershed (along with its sub-watersheds of Wahikuli, Honokōwai, Kahana, Honokahua, and Honolua) after decades of coral decline, giving rise to the multi-agency West Maui Ridge to Reef (R2R) Initiative. The DEVELOP Hawai’i Water Resources team partnered with the R2R Initiative and the Hawai’i Department of Land and Natural Resources Division of Aquatic Resources (DLNR-DAR) to address the need for better watershed management practices. The team provided the partners with a Google Earth Engine tool that displays land use and land cover changes (LULCC) in the five watersheds and detects near-shore turbidity, chlorophyll-a (chl-a), and sea surface temperature using Landsat 4 Thematic Mapper (TM), Landsat 5 TM, Landsat 7 Enhanced Thematic Mapper Plus (ETM+), Landsat 8 Operational Land Imager (OLI), Terra Moderate Resolution Imaging Spectroradiometer (MODIS), and Aqua MODIS. Team members used ancillary data provided by the R2R Initiative and the USGS Pacific Coastal and Marine Science Center (PCMSC) to validate satellite parameter values. The land cover analysis captured a general trend of increasing impervious cover and decreasing vegetated cover from 1989 to 2019; however, the extent of this change varied between each watershed. This analysis, coupled with the tool, can help project partners continually monitor terrestrial and marine patterns associated with coral decline.

Water Resources↗
NASA NTRS2002

Land Surface Data Assimilation and the Gulf Coast Sea-Breeze

A technique has been developed for assimilating GOES-derived skin temperature tendencies and insolation into the surface energy budget equation of a mesoscale model so that the simulated rate of temperature change closely agrees with the satellite observations. A critical assumption of the technique is that the availability of moisture (either from the soil or vegetation) is the least known term in the model's surface energy budget. Therefore, the simulated latent heat flux, which is a function of surface moisture availability, is adjusted based upon differences between the modeled and satellite observed skin temperature tendencies. An advantage of this technique is that satellite temperature tendencies are assimilated in an energetically consistent manner that avoids energy imbalances and surface stability problems that arise from direct assimilation of surface shelter temperatures. The fact that the rate of change of the satellite skin temperature is used rather than the absolute temperature means that sensor calibration is not as critical. The focus of this paper is to examine how the satellite assimilation technique impacts simulations of near-surface meteorology on the 4- to 48-hour time scale. The technique is implemented within the PSU/NCAR MM5 V34 and applied on a 36-km CONUS domain and a 12-km nest centered over Oklahoma. Two Friday periods during 2000 were selected for study, one during the warm season (May-June) and the other in the cold season (Nov-Dec). Bulk verification statistics (BIAS and RMSE) of surface air temperature and dewpoint show that the assimilation technique can improve numerical simulations on both regional and continental scales. Comparison of the simulated surface energy and water fluxes with observations from Energy Balance Bowen Ratio measurements taken at CART/ARM sites in the Southern Great Plains showed the assimilation technique produces a realistic argument of the Bowen ratio in both seasons. Additional runs with the Oregon State University land surface scheme as implemented within MM5 will be made and comparisons with assimilation results will be presented at the meeting.

Lapenta, William M.↗
NASA NTRS1992

Definition and preliminary design of the LAWS (Laser Atmospheric Wind Sounder), volume 2, phase 2

Accurate knowledge of winds is critical to our understanding of the earth's climate and to our ability to predict climate change. Winds are a fundamental component of highly nonlinear interactions between oceans, land surfaces, and the atmosphere. Interactions at these interfaces are the focus of much climate change research. Although wind information is critical for advancing our understanding, currently most of our description of atmospheric motion is obtained indirectly - i.e., derived from observations of temperature and moisture through geostrophic relationships. Direct measurement of winds over the globe is limited to land-based rawinsonde surface stations and a few ship/aircraft reports. Cloud track winds using satellite imagery are calculated but must be used with great care. The LAWS mission objective, therefore, is to provide diurnal and global direct observations of winds - an observation that will incrementally enhance our knowledge of the earth's climate and physical processes responsible for its change. This document is Volume 2 of the LAWS Phase 2 Final Study Report and describes the definition and preliminary design of the LAWS instrument, together with details of the laser breadboard program conducted during the last 18 months of the program.

Source record↗
NASA NTRS2011

NASA SPoRT Initialization Datasets for Local Model Runs in the Environmental Modeling System

The NASA Short-term Prediction Research and Transition (SPoRT) Center has developed several products for its National Weather Service (NWS) partners that can be used to initialize local model runs within the Weather Research and Forecasting (WRF) Environmental Modeling System (EMS). These real-time datasets consist of surface-based information updated at least once per day, and produced in a composite or gridded product that is easily incorporated into the WRF EMS. The primary goal for making these NASA datasets available to the WRF EMS community is to provide timely and high-quality information at a spatial resolution comparable to that used in the local model configurations (i.e., convection-allowing scales). The current suite of SPoRT products supported in the WRF EMS include a Sea Surface Temperature (SST) composite, a Great Lakes sea-ice extent, a Greenness Vegetation Fraction (GVF) composite, and Land Information System (LIS) gridded output. The SPoRT SST composite is a blend of primarily the Moderate Resolution Imaging Spectroradiometer (MODIS) infrared and Advanced Microwave Scanning Radiometer for Earth Observing System data for non-precipitation coverage over the oceans at 2-km resolution. The composite includes a special lake surface temperature analysis over the Great Lakes using contributions from the Remote Sensing Systems temperature data. The Great Lakes Environmental Research Laboratory Ice Percentage product is used to create a sea-ice mask in the SPoRT SST composite. The sea-ice mask is produced daily (in-season) at 1.8-km resolution and identifies ice percentage from 0 100% in 10% increments, with values above 90% flagged as ice.

Case, Jonathan L.↗
NASA NTRSDate not supplied

MEDLI2 Material Response Model Development and Validation

During the entry of Mars Science Laboratory (MSL) the heatshield was equipped with the instrumentation suite Mars Entry, Descent, and Landing Instruments (MEDLI). In-depth thermocouple (TC) data was used to reconstruct the surface heating and temperatures. Discrepancies between MEDLI’s recorded in-depth heating data and the predicted thermal response and recession led to a campaign to characterize and test Mars Entry, Descent, and Landing Instrument 2 (MEDLI2) flight lot thermal protection materials (TPS) at relevant temperatures and pressures for Martian entry conditions. This paper covers the development and validation of MEDLI2 flight lot material response models for the heatshield material Phenolic Impregnated Carbon Ablator (PICA) and the backshell material Super-Lightweight Ablator (SLA-561V). Virgin and char thermal conductivities were updated as a function of temperature and pressure in the MEDLI2 specific material response models. Other material properties such as virgin and char density, emissivity, absorptivity, and specific heat capacitance was also characterized and compared to the “Heritage” models used during the TPS design phase of Mars 2020. Fully Implicit Ablation and Thermal response (FIAT) simulations were completed using the Heritage and MEDLI2 material response models to provide evidence of the increased accuracy of the MEDLI2 model. FIAT predicted in-depth temperatures were compared to flight lot certification ground-test arc jet test data and MEDLI2 flight thermocouple data.

Material response↗
NASA NTRS1989

Monitoring global land surface using Nimbus-7 37 GHz data - Theory and examples

Simplified radiative transfer models for 37 GHz brightness temperatures are developed and applied to observations taken with the Nimbus-7 scanning multichannel microwave radiometer. It is found that, as the vegetation density increases, polarization difference decreases. The polarization difference also decreases with increasing surface roughness. Empirical relations are established between the satellite observations and annual rainfall over Africa and Australia, primary productivity, and actual evaporation. Color-coded maps of primary productivity and evaporation are presented.

Choudhury, Bhaskar J.↗
NASA NTRS1976

Results of static tests of a 1/4 scale model of the Boeing YC-14 powered-lift system

One quarter scale static ground tests of the Boeing YC-14 powered lift system were conducted for correlation with full scale test results. The 1/4 scale model utilized a JT-15D turbofan engine to represent the CF6-50D engine employed on the YC-14 advanced medium STOL transport prototype aircraft. The tests included evaluation of static turning performance, static surface pressure and temperature distributions, fluctuating loads, and accelerations of portions of the wing, flaps, and fuselage. Results are presented for the landing flap configuration over an appropriate range of fan pressure ratio as affected by several variables including ground height and vortex generator modifications. Static turning angles of the order of 60 deg were obtained. The highest surface pressures and temperatures were concentrated over the upper surface of the flaps in the region immediately aft of the upper surface blown nozzle.

Hassell, J. L., Jr.↗
NASA NTRS1994

Spectral emissivity measurements of land-surface materials and related radiative transfer simulations

Spectral radiance measurements have been made in the laboratory and in the field for deriving spectral emissivities of some land cover samples with a spectroradiometer and an auxiliary radiation source in the wavelength range 2.5-14.5 micrometers. A easy and quick four-step method (four steps to measure the sample and a diffuse reflecting plate surface under sunshine and shadowing conditions, respectively) has been used for simultaneous determination of surface temperature and emissivity. We emphasized in-situ measurements in combination with radiative transfer simulations, and an error analysis for basic assumptions in deriving spectral emissivity of land-surface samples from thermal infrared measurements.

Wan, Z.↗
NASA NTRS1982

Short-term climatic fluctuations forced by thermal anomalies

A two level, global, spectral model using pressure as a vertical coordinate was developed. The system of equations describing the model is nonlinear and quasi-geostrophic (linear balance). Static stability is variable in the model. A moisture budget is calculated in the lower layer only. Convective adjustment is used to avoid supercritical temperature lapse rates. The mechanical forcing of topography is introduced as a vertical velocity at the lower boundary. Solar forcing is specified assuming a daily mean zenith angle. The differential diabatic heating between land and sea is paramterized. On land and sea ice surfaces, a steady state thermal energy equation is solved to calculate the surface temperature. On the oceans, the sea surface temperature is specified as the climatological average for January. The model is used to simulate the January, February and March circulations.

Hanna, A. F.↗
NASA NTRS1984

Short-term climatic fluctuations forced by thermal anomalies

A two level, global, spectral model using pressure as a vertical coordinate was developed. The system of equations describing the model is nonlinear and quasi-geostrophic (linear balance). Static stability is variable in the model. A moisture budget is calculated in the lower layer only. Convective adjustment is used to avoid supercritical temperature lapse rates. The mechanical forcing of topography is introduced as a vertical velocity at the lower boundary. Solar forcing is specified assuming a daily mean zenith angle. The differential diabatic heating between land and sea is parameterized. On land and sea ice surfaces, a steady state thermal energy equation is solved to calculate the surface temperature. On the oceans, the sea surface temperature is specified as the climatological average for January. The model is used to simulate the January, February and March circulations. Previously announced in STAR as N83-14822

Hanna, A. F.↗
NASA NTRS1983

Short-term climatic fluctuations forced by thermal anomalies

A two level, global, spectral model using pressure as a vertical coordinate was developed. The system of equations describing the model is nonlinear and quasi-geostrophic (linear balance). Static stability is variable in the model. A moisture budget is calculated in the lower layer only. Convective adjustment is used to avoid supercritical temperature lapse rates. The mechanical forcing of topography is introduced as a vertical velocity at the lower boundary. Solar forcing is specified assuming a daily mean zenith angle. The differential diabatic heating between land and sea is parameterized. On land and sea ice surfaces, a steady state thermal energy equation is solved to calculate the surface temperature. On the oceans, the sea surface temperature is specified as the climatological average for January. The model is used to simulate the January, February and March circulations. Previously announced in STAR as N83-14822

Hanna, A. F.↗
NASA NTRS1980

The seasonal cycle of snow cover, sea ice and surface albedo

The paper examines satellite data used to construct mean snow cover caps for the Northern Hemisphere. The zonally averaged snow cover from these maps is used to calculate the seasonal cycle of zonally averaged surface albedo. The effects of meltwater on the surface, solar zenith angle, and cloudiness are parameterized and included in the calculations of snow and ice albedo. The data allows a calculation of surface albedo for any land or ocean 10 deg latitude band as a function of surface temperature ice and snow cover; the correct determination of the ice boundary is more important than the snow boundary for accurately simulating the ice and snow albedo feedback.

Robock, A.↗