Recovery of rare earth elements with ionic liquids
This review focuses on the recovery of REEs from waste with ionic liquids (ILs) as dilutants and extractants to tackle the REE supply challenge.
SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
This review focuses on the recovery of REEs from waste with ionic liquids (ILs) as dilutants and extractants to tackle the REE supply challenge.
Positron annihilation lifetime spectroscopy (PALS) is used to study the ionic liquid 1-methyl-3-propylimidazolium bis(trifluoromethylsulfonyl)imide [C{sub 3}MIM][NTf{sub 2}] in the temperature range between 150 and 320 K. The positron decay spectra are analyzed using the routine LifeTime-9.0 and the size distribution of local free volumes (subnanometer-size holes) is calculated. This distribution is in good agreement with Fuerth's classical hole theory of liquids when taking into account Fuerth's hole coalescence hypothesis. During cooling, the liquid sample remains in a supercooled, amorphous state and shows the glass transition in the ortho-positronium (o-Ps) lifetime at 187 K. The mean hole volume varies between 70 A{sup 3} at 150 K and 250 A{sup 3} at 265-300 K. From a comparison with the macroscopic volume, the hole density is estimated to be constant at 0.20x10{sup 21} g{sup -1} corresponding to 0.30 nm{sup -3} at 265 K. The hole free volume fraction varies from 0.023 at 185 K to 0.073 at T{sub m}+12 K=265 K and can be estimated to be 0.17 at 430 K. It is shown that the viscosity follows perfectly the Cohen-Turnbull free volume theory when using the free volume determined here. The heating run clearly shows crystallization at 200 K by an abrupt decrease in the mean <{tau}{sub 3}> and standard deviation {sigma}{sub 3} of the o-Ps lifetime distribution and an increase in the o-Ps intensity I{sub 3}. The parameters of the second lifetime component <{tau}{sub 2}> and {sigma}{sub 2} behave parallel to the o-Ps parameters, which also shows the positron's (e{sup +}) response to structural changes. During melting at 253 K, all lifetime parameters recover to the initial values of the liquid. An abrupt decrease in I{sub 3} is attributed to the solvation of e{sup -} and e{sup +} particles. Different possible interpretations of the o-Ps lifetime in the crystalline state are briefly discussed.
The potentialities of methylimidazolium-based ionic liquids (ILs) as solvents were evaluated for some relevant separation problems—terpene fractionation and fuel processing—studying selectivities, capacities, and solvent performance indices. The activity coefficients at infinite dilution of the solute (1) in the IL (3), γ13∞, of 52 organic solutes were measured by inverse gas chromatography over a temperature range of 333.2–453.2 K. The selected ILs are 1-butyl-3-methylimidazolium hexafluorophosphate, [C4mim][PF6], and the equimolar mixture of [C4mim][PF6] and 1-butyl-3-methylimidazolium chloride, [C4mim]Cl. Generally, low polar solutes follow γ1,C4mimCl∞ > γ1,C4mimPF6+C4mimCl∞ > γ1,C4mimPF6∞ while the opposite behavior is observed for alcohols and water. For citrus essential oil deterpenation, the results suggest that cations with long alkyl chains, such as C12mim+, promote capacity, while selectivity depends on the solute polarity. Promising results were obtained for the separation of several model mixtures relevant to fuel industries using the equimolar mixture of [C4mim][PF6] and [C4mim]Cl. This work demonstrates the importance of tailoring the polarity of the solvents, suggesting the use of ILs with mixed anions as alternative solvents for the removal of aliphatic hydrocarbons and contaminants from fuels.
Our aims were to identify thermophilic microbial communities that degrade green waste in the presence of the ionic liquids (IL) tetrabutylphosphonium chloride and tributylethylphosphonium diethylphosphate and examine preservation methods for IL-tolerant communities. High-solids incubations with stepwise increases in IL concentration were conducted to enrich for thermophilic IL-tolerant communities that decomposed green waste. 16S rRNA sequencing of enriched communities revealed microorganisms capable of tolerating high levels of IL. Furthermore, cryogenic preservation of enriched communities reduced the IL tolerance of the community and decreased the relative abundance of IL-tolerant organisms. The use of cryoprotectants did not have an effect on microbial activity on green waste of the stored community. A successful approach was developed to enrich communities that decompose green waste in thermophilic high-solids environments in the presence of IL. Alternative community storage and revival methods are necessary for maintenance and recovery of IL-tolerant communities. The enriched communities provide a targeted source of enzymes for the bioconversion of IL-pretreated green waste for conversion to biofuels.
To begin this abstract, amorphous metal-oxide semiconductors offer the high carrier mobilities and excellent large-area uniformity required for high performance, transparent, flexible electronic devices; however, a critical bottleneck to their widespread implementation is the need to activate these materials at high temperatures which are not compatible with flexible polymer substrates. The highly controllable activation of amorphous indium gallium zinc oxide semiconductor channels using ionic liquid gating at room temperature is reported. Activation is controlled by electric field-induced oxygen migration across the ionic liquid-semiconductor interface. In addition to activation of unannealed devices, it is shown that threshold voltages of a transistor can be linearly tuned between the enhancement and depletion modes. Finally, the first ever example of transparent flexible thin film metal oxide transistor on a polyamide substrate created using this simple technique is demonstrated. Finally, this study demonstrates the potential of field-induced activation as a promising alternative to traditional postdeposition thermal annealing which opens the door to wide scale implementation into flexible electronic applications.
Here, the design, synthesis, and characterization of an amphiphilic ionic liquid (IL) monomer possessing a transition metal coordinating acrylamide moiety is described. Incorporation of the acrylamide moiety is achieved by converting l-histidine into an imidazolium, followed by alkylation to introduce a decyl chain, and acrylation of the α-amino group. The acrylamide containing IL monomer and a co-monomer, poly(ethylene glycol) diacrylate (PEGDA M n 575), self-assembles into a weakly ordered 2D hexagonal lyotropic mesophase in water (34 ± 2 (w/w)%). Upon photo-irradiation of the mesophase a nanostructured polyelectrolyte retaining the 2D hexagonal structure is produced. Doping the mesophase with Au 3+ ions prior to photo-irradiation produces plasmonic Au NP copolymer composites only at a threshold mole ratio of IL monomer to gold ions (i.e., onset at 1740:1 mole ratio). At higher monomer to Au 3+ mole ratios plasmonic NPs are not formed. Evaluation of the in-situ synthesized plasmonic Au NPs by SAXS and optical spectroscopy indicate they are smaller, more uniform spherical particles that resist aggregation upon swelling and de-swelling in ethanol when compared to previously reported composites employing an IL monomer that lacks a metal ion coordination site (e.g., 3-decyl-1-vinylimidazolium IL).
Molecular-level spectroscopic analyses of an aprotic and a protic room-temperature ionic liquid, BMIM OTf and BMIM HSO4, respectively, have been carried out with the aim of verifying molecular dynamics simulations that predict anion pair formation in these fluid structures. Fourier-transform infrared spectroscopy, Raman spectroscopy and nuclear magnetic resonance spectroscopy of various nuclei support the theoretically-determined average molecular arrangements.
Here we explored the feasibility of using a phosphonium phosphate ionic liquid as a candidate anti-wear and anti-pitting additive for rear axle lubricant. This particular IL was first added to a VHVI8 base oil at 2–3% concentration and demonstrated effective surface protection for wear and micro-cracking under rolling-sliding contacts. The promising results directed to a step further to produce a series of IL-containing low-viscosity (about a half of SAE 75W-90) fully formulated gear oils. Selected IL-containing experimental oils showed superior mitigation of rolling contact fatigue to a commercial SAE 75W-90 gear oil in bench-scale rolling-sliding tests. Full-scale hub dynamometer tests were then conducted and demonstrated more than 3% power output and torque generation for an IL-containing low-viscosity gear oil benchmarked against commercial baselines.
In pursuit of energy efficiency and durability throughout human history, advances in lubricants have always played important roles. Ionic liquids (ILs) are room-temperature molten salts that possess unique physicochemical properties and have shown great potential in many applications with lubrication as one of the latest. While earlier work (2001–2011) primarily explored the feasibility of using ILs as neat or base lubricants, using ILs as lubricant additives has become the new focal research topic since the breakthrough in ILs’ miscibility in nonpolar hydrocarbon oils in early 2012. This work reviews the recent advances in developing ILs as additives for lubrication with an attempt to correlate among the cationic and anionic structures, oil-solubility, and other relevant physicochemical properties, and lubricating behavior. Effects of the concentration of ILs in lubricants and the compatibility between ILs and other additives in the lubricant formulation on the tribological performance are described followed by a discussion of wear protection mechanism based on tribofilm characterization. As a result, future research directions are suggested at the end.
In this work, we investigated the X-ray absorption spectroscopy (XAS) fingerprint of EMImTFSI ionic liquid (IL) and its fragmentation products created by X-ray irradiation. To accomplish this, we used an open geometry where an IL droplet is directly exposed in the vacuum chamber and an enclosed geometry where the IL is confined in a cell covered by an X-ray transparent membrane. In the open geometry, the XAS signature was stable and consistent with experimental and theoretical spectra reported in the literature. In contrast, when the IL is enclosed, its XAS evolves continuously under X-ray illumination due to the accumulation of volatile fragmentation products inside the closed cell, while they evaporate in the open geometry. The changes in the XAS from the core levels of relevant elements (C, N, S, F) together with density functional theory calculations allowed us to identify the chemical nature of the fragment products and the chemical bonds most vulnerable to rupture under soft X-ray irradiation.
Intermolecular interactions between a Ru²⁺(bpy)₃ solute and the anions and cations of four different ionic liquids (ILs) are investigated by 2D NMR nuclear Overhauser effect (NOE) techniques, including {¹H-¹⁹F} HOESY and {¹H-¹H} ROESY. Four ILs are studied, each having the same bis(trifluoromethylsulfonyl)amide anion in common. Two of the ILs have aliphatic 1-alkyl-1-methylpyrrolidinium cations, while the other two ILs have aromatic 1-alkyl-3-methylimidazolium cations. ILs with both shorter (butyl) and longer (octyl or decyl) cationic alkyl substituents are studied. NOE NMR results suggest that the local environment of IL anions and cations near the Ru²⁺(bpy)₃ solute is rather different from the bulk IL structure. The solute-anion and solute-cation interactions are significantly different both for ILs with short vs long alkyl tails and for ILs with aliphatic vs aromatic cation polar head groups. In particular, the solute-anion interactions are observed to be about 3 times stronger for the cations with shorter alkyl tails relative to the ILs with longer alkyl tails. The Ru²⁺(bpy)₃ solute interacts with both the polar head and the nonpolar tail groups of the 1- butyl-1-methylpyrrolidinium cation but only with the nonpolar tail groups of the 1-decyl-1-methylpyrrolidinium cation.
Here, we studied the transport of room-temperature ionic liquids (RTILs) through charged conical nanopores using a Landau-Ginzburg-type continuum model that takes steric effect and strong ion-ion correlations into account. When the surface charge is uniform on the pore wall, weak current rectification is observed. When the charge density near the pore base is removed, the ionic current is greatly suppressed under negative bias voltage while nearly unchanged under positive bias voltage, thereby leading to enhanced current rectification. These predictions agree qualitatively with prior experimental observations, and we elucidated them by analyzing the different components of the ionic current and the structural changes of electrical double layers (EDLs) at the pore tip under different bias voltages and surface charge patterns. These analyses reveal that the different modifications of the EDL structure near the pore tip by the positive and negative bias voltages cause the current rectification and the observed dependence on the distribution of surface charge on the pore wall. The fact that the current rectification phenomena are captured qualitatively by the simple model originally developed for describing EDLs at equilibrium conditions suggests that this model may be promising for understanding the ionic transport under nonequilibrium conditions when the EDL structure is strongly perturbed by external fields.
The interfacial structure and composition of water solutions with alkylimidazolium ionic liquids varying in their halide anions ([C12mim][X], X = Cl and I) were investigated by X-ray near-total-reflection fluorescence spectroscopy and X-ray reflectivity measurements. We demonstrate that X-ray fluorescence and reflectivity techniques provide a more direct measurement of surface adsorption. Furthermore, we show that for [C12mim][Cl] and [C12mim][I] solutions with mixed inorganic salts (NaI, NaCl), I– ions replace Cl– above the critical micelle concentration (CMC) of [C12mim][Cl] at much lower concentrations of NaI, whereas NaCl concentrations a hundred times higher than the CMC of [C12mim][I] only partially replace the I– at the interface. Our surface-sensitive X-ray diffraction and spectroscopy provide two independent tools to directly determine the surface adsorption of ionic surfactants and the interfacial composition of the surface films.
A phosphonium-phosphinate ionic liquid (IL) was studied as a lubricant additive for rolling-sliding contacts. The bench-scale test was designed to simulate automotive rear axle operation during cold start, highway towing, and overload conditions. Adding such an IL (2%) into a base oil significantly reduced wear loss and rolling contact fatigue, e.g., microcracking and micropitting, but made the vibrational noise notably higher under a low (-1.5%) sliding roll ratio (SRR). Additionally, worn surface characterization revealed an interesting texture pattern with alternating smoother plateaus and rougher valleys, which is believed to cause the high vibration. No increased vibration was observed at a high (-30%) SRR, possibly because the more aggressive sliding abrasion prevented such a surface texture from forming.
A brief account is given of highlights of our computational efforts – often in collaboration with experimental groups – to understand spectroscopic and chemical properties of ionic liquids (ILs). Molecular dynamics, including their inhomogeneous character, responsible for key spectral features observed in dielectric absorption, infra-red (IR) and fluorescence correlation spectroscopy (FCS) measurements are elucidated. Mechanisms of chemical processes involving imidazolium-based ILs are illustrated for CO 2 capture and related reactions, transesterification of cellulose, and Au nanocluster-catalyzed Suzuki cross-coupling reaction with attention paid to differing roles of IL ions. A comparison with experiments is also made.
The preparation and polymerization of a bifunctional imidazolium-based ionic liquid (IL) monomer that incorporates both a vinyl group and a thiophene moiety is reported. Potentiodynamic electropolymerization of the monomer produces an optically birefringent polymer film that strongly adheres to the electrode surface. Fourier transform IR spectroscopy shows that polymerization occurs through both the vinyl and thienyl groups. Cylic voltammetry (CV) is used to determine the polymer oxidation potential (1.66 V) and electrochemical bandgap, Eg, of 2.45 eV. The polymer exhibits electrochromism, converting from yellow in the neutral form ({lambda}{sub max} = 380 nm) to blue in the polaronic state at 0.6 V ({lambda}{sub max} = 672 nm) and to blue-grey in the bipolaronic state at 1.2 V ({lambda}{sub max} > 800 nm). Topographic atomic force microscopy (AFM) images reveal isolated (separated) fibrils. Grazing-incidence small-angle X-ray scattering (GISAXS) studies indicate a lamellar structure with a lattice spacing of 3.2 nm. Wide-angle X-ray diffraction (WAXD) studies further suggest that the polymerized thiophene sheets are oriented perpendicular to the polymerized vinylimidazolium. The electrical conductivity, as determined by four-probe dc conductivity measurements was found to be 0.53 S cm{sup -1} in the neutral form and 2.36 S cm{sup -1} in the iodine-doped state, values higher than typically observed for polyalkylthiophenes. The structural ordering is believed to contribute to the observed enhancement of the electrical conductivity.
As we advance our understanding, ionic liquids (ILs) are finding ever broader scope within the chemical sciences including, most recently, pharmaceutical, enzymatic, and bioanalytical applications. With examples of enzymatic activity reported in both neat ILs and in IL/water mixtures, enzymes are frequently assumed to adopt a quasi-native conformation, even if little work has been carried out to date toward characterizing the conformation, dynamics, active-site perturbation, cooperativity of unfolding transitions, free energy of stabilization, or aggregation/oligomerization state of enzymes in the presence of an IL solvent component. In this study, human serum albumin and equine heart cytochrome c were characterized in aqueous solutions of the fully water-miscible IL 1-butyl-3-methylimidazolium chloride, [bmim]Cl, by small-angle neutron and X-ray scattering. At [bmim]Cl concentrations up to 25 vol.%, these two proteins were found to largely retain their higher-order structures whereas both proteins become highly denatured at the highest IL concentration studied here (i.e., 50 vol.% [bmim]Cl). The response of these proteins to [bmim]Cl is analogous to their behavior in the widely studied denaturants guanidine hydrochloride and urea which similarly lead to random coil conformations at excessive molar concentrations. Interestingly, human serum albumin dimerizes in response to [bmim]Cl, whereas cytochrome c remains predominantly in monomeric form. These results have important implications for enzymatic studies in aqueous IL media, as they suggest a facile pathway through which biocatalytic activity can be altered in these nascent and potentially green electrolyte systems.
Ionic liquids (ILs) are attractive media for CO 2 capture but remain limited by viscosity and cost. Blending ILs with ethylene glycol (EG) is a practical route to mitigate these constraints, yet the molecular origins of cosolvent effects and their dependence on composition are not well resolved. We combine Fourier-transform infrared (FT-IR) spectroscopy with quantum-chemical (DFT) analysis to elucidate how the IL:EG molar ratio modulates intermolecular interactions and electronic structure. Computed vibrational frequencies enable mode assignment and deconvolution of overlapping bands, revealing systematic, ratio-dependent shifts and broadenings in (i) EG O–H stretching, (ii) cation and EG C–H stretchings (imidazolium C2–H, C4–H, C5–H, methyl and ethyl groups, -CH2 of EG), (iii) anion signature modes (e.g., CN motifs), and (iv) EG C–O and C–C stretchings, consistent with the redistribution of hydrogen-bonding networks. Molecular electrostatic potential (MESP) maps quantify attenuation of extreme potential regions with increasing EG, indicating progressive screening of cation–anion electrostatic interactions. Quantum Theory of Atoms in Molecules (QTAIM) identifies emergent bond critical points between EG and the IL ions, while Reduced Density Gradient–Noncovalent Interaction (RDG–NCI) analysis differentiates strong directional hydrogen bonds from dispersive contacts across compositions. Together, these results show that EG fraction controls a switch from predominantly ion–ion to mixed ion–EG coordination, altering local polarity and polarizability that underlie the observed FT-IR trends. The framework provides composition–structure–spectrum relationships that can guide rational selection of IL:EG ratios to balance favorable molecular interactions with practical performance targets in scalable CO 2 capture systems.