Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “interpreted”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44

Mare basalts - Melting experiments and petrogenetic interpretations

Equilibrium crystallization sequences are determined in melting experiments in vacuum at Fe saturation on synthetic mare basalt compositions 70215 and 15318 Red Glass (both high-Ti) as well as 15555-15016 (low-Ti). The experiments confirm that much of the chemical variation within both the high- and low-Ti suites is controlled by near-surface fractionation processes, although the two suites cannot be related by such mechanisms. The components and crystallization products of the liquidus at various temperatures and pressures are reported. Mare basalt petrogenesis is interpreted in terms of high-pressure equilibria at Fe saturation; it is suggested that low-Ti basalts represent partial melts of a differentiated olivine-pyroxenite lunar mantle at 240 km or deeper, while cumulus clinopyroxene in the source is responsible for their REE characteristics. The formation of high-Ti basalts is considered.

Kesson, S. E.↗

Limb brightening on Uranus - An interpretation of the lambda 7300 A methane band

Measurements of limb brightening on the Uranus disk within the lambda 7300 A CH4 band are interpreted using an elementary inhomogeneous radiative transfer model to describe the atmosphere. A two layer model which consists of a finite, optically thin, region of conservatively scattering particles overlying a semi-infinite clear H2-CH4 atmosphere satisfactorily explains the observations. The maximum optical thickness of the upper layer appears to lie in the range 0.1 to 0.2. The CH4/H2 mixing ratio in the lower layer is larger than the corresponding solar value by a factor on the order of three or greater. The results are discussed briefly in terms of current models of the Uranus atmosphere.

Price, M. J.↗

Detection and interpretation of ocean roughness variations across the Gulf Stream inferred from radar cross section observations

Radar cross section data shows that the Gulf Stream has a higher cross section per unit area (interpreted here as a greater roughness) than the water on the continental shelf. A steep gradient in cross section was often seen at the expected location of the western boundary. There were also longer-scale (10-20 km) gradual fluctuations within the stream of significant magnitude. These roughness variations are correlated with the surface shear stress that the local wind imposes on the sea. Using the available surface-truth information concerning the wind speed and direction, an assumed Gulf Stream velocity profile, and high-resolution ocean-surface temperature data obtained by the VHRR onboard a NOAA-NESS polar-orbiting satellite, the present study demonstrates that the computed surface stress variation bears a striking resemblance to the measured radar cross-section variations.

Weissman, D. E.↗

An interpretation of special and general isotopic anomalies in r-process nuclei

My analysis of new discoveries by McCulloch and Wasserburg of Ba and Nd isotopic anomalies in inclusions of the Allende meteorite argues that (1) these anomalies contain special extinct radioactivities resulting from radioactive decay within grains formed in and ejected from the supernova interior, (2) the inclusions studied are fused assemblies of interstellar grains that were never totally vaporized, and (3) theoretical separation into r and s abundances suggests that fluctuations between r and s components has occurred during the accumulation processes. These points lend support to a new chemical picture of the early solar system that I have developed, although many interpretations remain possible. Measurements of the neutron-capture cross sections of Nd isotopes are urgently needed to experimentally validate these conclusions.

Clayton, D. D.↗

Interpretation of altimeter data

Two methods are used to interpret the whole range of signals contained in the Geos 3 altimeter data. They each address a different class of events and thus complement each other in their ability to provide information on the state of convection in the earth's mantle. The long wavelength section of the spectrum yields information on the depth of convection cells and the viscosity variations inside those cells through a study of the variations of the admittance as a function of wavelength. The short wavelength section of the spectrum provides information on the evolution of the lithosphere, considered as a thin elastic plate, by studying its response to loads at several points in its evolution. The variation of the flexural rigidity with age is obtained from that study.

Roufosse, M. C.↗

Interpretive computer simulator for the NASA Standard Spacecraft Computer-2 (NSSC-2)

An Interpretive Computer Simulator (ICS) for the NASA Standard Spacecraft Computer-II (NSSC-II) was developed as a code verification and testing tool for the Annular Suspension and Pointing System (ASPS) project. The simulator is written in the higher level language PASCAL and implented on the CDC CYBER series computer system. It is supported by a metal assembler, a linkage loader for the NSSC-II, and a utility library to meet the application requirements. The architectural design of the NSSC-II is that of an IBM System/360 (S/360) and supports all but four instructions of the S/360 standard instruction set. The structural design of the ICS is described with emphasis on the design differences between it and the NSSC-II hardware. The program flow is diagrammed, with the function of each procedure being defined; the instruction implementation is discussed in broad terms; and the instruction timings used in the ICS are listed. An example of the steps required to process an assembly level language program on the ICS is included. The example illustrates the control cards necessary to assemble, load, and execute assembly language code; the sample program to to be executed; the executable load module produced by the loader; and the resulting output produced by the ICS.

Smith, R. S.↗

Length and bursting of separation bubbles: A physical interpretation

A physical interpretation of the observed form of the pressure distribution beneath a two-dimensional separation bubble which modified the external inviscid pressure distribution only locally is given in terms of boundary layer concepts. A simple method for estimating along a mean streamline entrained into the underside of a growing shear layer through the transition region is discussed, and predictions of bubble bursting conditions and a lower bound on the bubble length are compared with experiment.

Russell, J. M.↗

Problems with the interpretation of paleomagnetic measurements due to studies of basalts from the Paleovolcano Vogelsberg in Hessen

The palaeomagnetic parameters of more than 5,000 samples of cores taken from 33 drilling holes through innumerable basalt units of the Vogelsberg Paleovolcano in Hessen were measured. Measurements of specimens of thin and thick layers without any gap proved that inclination, natural remanence, susceptibility and Konigsberger factor were dependent on their distance from the surface of units, layers, lamelles, etc. Therefore, representative data for the evaluation of palaeomagnetic measurements can be expected only in the interior part of lava flows and intrusions. The statistic method which enclosed all values of measurements gave significant data which was not appropriate for the interpretation of palaeomagnetic and geological events.

Schenk, E.↗

Distribution automation and control support; Analysis and interpretation of DAC working group results for use in project planning

The Executive Summary and Proceedings of the Working Group Meeting was analyzed to identify specific projects appropriate for Distribution Automation and Control DAC RD&D. Specific projects that should be undertaken in the DAC RD&D program were recommended. The projects are presented under broad categories of work selected based on ESC's interpretation of the results of the Working Group Meeting. Some of the projects are noted as utility industry projects. The ESC recommendations regarding program management are presented. Utility versus Government management responsibilities are noted.

Klock, P.↗

Interpretation of satellite gyroharmonic resonance observations

An analytical expression is obtained for the rendezvous conditions between a propagating wave near nfH and a moving ionospheric sounder antenna, where fH is the ambient value of the electron gyrofrequency and n is an integer greater than 1. The agreement between the theoretical predictions and Alouette 1 satellite observations indicates that most of the long duration resonances (those with durations greater than about 2 msec) can be interpreted in terms of the reception of sounder-stimulated electrostatic waves that are reflected and returned to the sounder antenna. The results provide a technique for obtaining from sounder-stimulated plasma resonances information on ambient electron temperature corresponding to electron motions perpendicular to the ambient magnetic field.

Benson, R. F.↗

Interpretation of ground-based microwave measurements of the moon using a detailed regolith properties model

A detailed model for the regolith's thermophysical and microwave properties has been used for the interpretation of ground-based measurements of the moon's microwave brightness temperature variation with lunar phase and changes during eclipses. The ground-based measurements include some crucial new lunation variation observations at 2.8, 6.0 and 13.1 cm. The many parameters in the regolith properties model were assigned values based on a careful review of Apollo in situ and lab sample measurements of thermophysical and electrical properties. The first identification of a wavelength-dependent component of scattering is reported.

Gary, B. L.↗

An interpretation of Akasofu's substorm parameter

The power flux into the magnetosphere from the solar wind is analyzed using the model of polar cap electric fields described by D'Angelo (1977). It is shown that the substorm parameter proposed by Akasofu (1978) to predict the probability of a substorm can be interpreted as the portion of the solar wind electromagnetic power flux which penetrates the magnetosphere at a given moment.

Dangelo, N.↗

Techniques for interpretation of geoid anomalies

For purposes of geological interpretation, techniques are developed to compute directly the geoid anomaly over models of density within the earth. Ideal bodies such as line segments, vertical sheets, and rectangles are first used to calculate the geoid anomaly. Realistic bodies are modeled with formulas for two-dimensional polygons and three-dimensional polyhedra. By using Fourier transform methods the two-dimensional geoid is seen to be a filtered version of the gravity field, in which the long-wavelength components are magnified and the short-wavelength components diminished.

Chapman, M. E.↗

The observation and interpretation of the profile of C IV lambda-1548 emitted from a quiet region of the sun

The average properties of the quiet chromospheric network as seen in the transition region line of C IV at 1548 A have been investigated. Line profile data for the study were taken with the OSO 8 High Resolution Ultraviolet Spectrometer, which has moderate angular resolution, high spectral resolution, and good relative photometric accuracy. The profiles, when classified and averaged according to their intensities, were found to be symmetric and Gaussian in shape at all intensity levels. A marginally significant increase in line width with line intensity was detected but the average relative redshift in the network that has been a feature of other OSO 8 studies was not found. The network-to-cell contrast ratio was of the order of 13:1 with the extreme extending to 50.1. The measured average width of 0.22 A (FWHM) is in good agreement with earlier work. Finally, a theoretical interpretation is presented, based on both the line width measurement and consideration of the profile symmetry properties. It is concluded that acoustic waves alone cannot supply enough energy to balance the radiative and conductive losses from the corona. The data are, however, consistent with heating by Alfven waves.

Bruner, E. C., Jr.↗

An interpretation of the polarization of microwave bursts

High-spatial-resolution (a few seconds of arc) observations of microwave bursts have demonstrated that only the impulsive phase of the burst is polarized; one observes only one polarity in the burst source if it is weak (Alissandrakis and Kundu) and both polarities if it is intense (Enome et al.). These results are interpreted in terms of an asymmetrical bipolar field structure of the loop in which the energetic electrons responsible for the radiation are contained. The role of unequal field strengths at the feet of the loop on the number of electrons trapped and their pitch angle distribution are discussed in a specific model. Computations of the polarized intensity originating from each foot of the loop seem to be consistent with the observations at present available.

Kundu, M. R.↗

Map-guided interpretation of remotely-sensed imagery

A map-guided approach to interpretation of remotely sensed imagery is described, with emphasis on applications involving continuous monitoring of predetermined ground sites. Geometric correspondence between a sensed image and a symbolic reference map is established in an initial stage of processing by adjusting parameters of a sensor model so that image features predicted from the map optimally match corresponding features extracted from the sensed image. Information in the map is then used to constrain where to look in an image and what to look for. With such constraints, previously intractable remote sensing tasks can become feasible, even easy, to automate. Four illustrative examples are given, involving the monitoring of reservoirs, roads, railroad yards, and harbors.

Tenenbaum, J. M.↗

Manual interpretation of LANDSAT data

The task of the analyst throughout LACIE phases 1 and 2 consisted of outlining representative areas (fields) for all spectral classes within a segment on the basis of their appearance on the LANDSAT image products, and then labeling the crop type (wheat/nonwheat) within the selected training areas. For LACIE phase 3, a procedure was developed and implemented which incorporated clustering for spectral class definition and training statistics generation. The only analyst's task was crop type identification. The logical processes involved in interpretation are described, rather than a step-by-step description of analyst procedures.

Hay, C. M.↗

LACIE analyst interpretation keys

Two interpretation aids, 'The Image Analysis Guide for Wheat/Small Grains Inventories' and 'The United States and Canadian Great Plains Regional Keys', were developed during LACIE phase 2 and implemented during phase 3 in order to provide analysts with a better understanding of the expected ranges in color variation of signatures for individual biostages and of the temporal sequences of LANDSAT signatures. The keys were tested using operational LACIE data, and the results demonstrate that their use provides improved labeling accuracy in all analyst experience groupings, in all geographic areas within the U.S. Great Plains, and during all periods of crop development.

Baron, J. G.↗