SEARCH · Engineering Papers

Results for “interface mechanics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44

All sources NASA NTRS DOE OSTI

DOE OSTI2025

Decoupling Failure Pathways in Li-O 2 Cells Operated Under Lean Electrolyte Conditions

The operation of lithium-oxygen (Li-O 2 ) batteries under lean electrolyte conditions offers higher energy density but leads to rapid degradation and short cycle life. Although cathode passivation and electrolyte decomposition occur in all regimes, we show that under lean electrolyte conditions, failure is primarily driven by progressive electrolyte consumption at the lithium/solid electrolyte interphase (SEI), rather than by irreversible cathode passivation. Poor wetting of the lithium surface results in heterogeneous SEI growth and high local current densities, which accelerate electrolyte loss and cell failure. Strategies aimed at improving interfacial stability, including optimized wetting and SEI forming additives, significantly extend cycle life without compromising energy density. Our results establish anode-electrolyte interactions as the dominant degradation mechanism under lean electrolyte conditions, and emphasize the need to engineer a stable Li/SEI interface for long-lasting Li-O 2 batteries.

Córdoba, Daniel [Argonne National Laboratory (ANL)↗

DOE OSTI2023

Structure of coagulation factor VIII bound to a patient-derived anti-C1 domain antibody inhibitor

The development of pathogenic antibody inhibitors against coagulation factor VIII (FVIII) occurs in ~30% of congenital hemophilia A patients receiving FVIII replacement therapy as well as in all cases of acquired hemophilia A. KM33 is an anti-C1 domain antibody inhibitor previously isolated from a severe hemophilia A patient. In addition to potently blocking FVIII binding to von Willebrand factor and phospholipid surfaces, KM33 disrupts FVIII binding to lipoprotein receptor-related protein 1 (LRP1), which drives FVIII hepatic clearance and antigen presentation in dendritic cells. Here, we report on the structure of FVIII bound to NB33, a recombinant derivative of KM33, by single-particle cryo-electron microscopy. Furthermore, structural analysis reveals the NB33 epitope localizes to FVIII residues R2090-S2094 and I2158-R2159 which constitute membrane-binding loops in the C1 domain. Further analysis reveals multiple FVIII lysine and arginine residues, previously shown to mediate binding to LRP1, dock onto an acidic cleft at the NB33 variable domain interface, thus blocking a putative LRP1 binding site. Together, these results demonstrate a novel mechanism of FVIII inhibition by a patient-derived antibody inhibitor and provide structural evidence toward engineering FVIII with reduced LRP1-mediated clearance.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2023

An Overview of Challenges and Strategies for Stabilizing Zinc Anodes in Aqueous Rechargeable Zn-Ion Batteries

Aqueous rechargeable zinc ion batteries (ZIBs) have been revived and are considered a promising candidate for scalable electrochemical energy storage systems due to their intrinsic safety, low cost, large abundance, mature recyclability, competitive electrochemical performance, and sustainability. However, the deployment of aqueous rechargeable ZIBs is still hampered by the poor electrochemical stability and reversibility of Zn anodes, which is a common, inherent issue for most metal-based anodes. This review presents a comprehensive and timely overview of the challenges and strategies of Zn anodes toward durable ZIBs. First, several challenges that significantly reduce the Coulombic efficiency and cycling stability of Zn anodes are briefly discussed including dendrite formation, hydrogen evolution, and corrosion. Then, the mitigation strategies are summarized in terms of modifying the electrode/electrolyte interfaces, designing electrode structures, and optimizing electrolytes and separators. Further, we comprehensively discuss the mechanisms behind these issues and improvement strategies with respect to the anodes, electrolytes, and separators. Lastly, we provide perspectives and critical analyses of remaining challenges, outlook, and future direction for accelerating the practical application of aqueous rechargeable ZIBs.

25 ENERGY STORAGE↗

DOE OSTI2024

Multiphysics Degradation Modeling of Energy Storage Materials via RKPM with a Neural Network-Enhancement

In energy storage materials, strong electrochemical-mechanical coupling and highly anisotropic material properties contribute to the formation and propagation of micro-cracking during charge/discharge cycling, resulting in reduced performance and service life. A coupled electro-chemo-mechanical reproducing kernel particle method (RKPM) formulation is developed, and a patch-test is formulated to certify optimal convergence of the proposed RKPM method for the coupled physics system. With microstructural images supplied by the National Renewable Energy Laboratory (NREL), pixel-based model construction by RKPM is then used to represent the complex material microstructures for modeling the coupled physics of these systems. Further, a neural network-enhanced reproducing kernel particle method (NN-RKPM) [1, 2] is introduced to effectively model damage and crack propagation in the material microstructures; the location, orientation, and solution transition near a localization are automatically captured by superimposed block-level NN optimizations. This NN enrichment approach allows for effective modeling of localizations via a fixed background discretization, relieving tedious efforts for adaptive refinement in traditional mesh-based methods. Applications to the heterogeneous microstructures of Li-ion battery cathodes will be presented to demonstrate the effectiveness of the proposed methods. Reference: [1] Baek, J., Chen, J. S., Susuki, K., "Neural Network enhanced Reproducing Kernel Particle Method for Modeling Localizations," International Journal for Numerical Methods in Engineering, Vol. 123, pp 4422-4454, https://doi.org/10.1002/nme.7040, 2022. [2] Baek, J., Chen, J. S., "A Neural Network-Based Enrichment of Reproducing Kernel Approximation for Modeling Brittle Fracture", Computer Methods in Applied Mechanics and Engineering Vol. 410, 116590, 2024.

electro-chemo-mechanical coupling↗

DOE OSTI2026

Quasiparticle spectroscopy in tantalum films with different Ta/sapphire interfaces

One of the crucial aspects of current research in quantum information science is the identification and control of loss mechanisms in superconducting circuits. Although microwave measurements directly quantify device performance, additional techniques that probe quasiparticle excitations in superconducting films are needed to understand the microscopic mechanisms underlying dissipation and decoherence. Here, we present results from quasiparticle spectroscopy of Ta/sapphire films by measuring the Meissner-state magnetic susceptibility using a precision frequency-domain resonator specifically designed for thin films. We find direct evidence for additional low-energy excitations in samples with lower internal quality factors. These excitations are consistent with deep subgap states due to two-level systems, Yu-Shiba-Rusinov states near the gap edge, and perhaps other pair-breaking mechanisms. The developed non-destructive frequency-domain quasiparticle spectroscopy is a valuable addition to the quantum materials toolbox.

Moirangthem, Bicky Singh [Ames Lab; Iowa State U.]↗

DOE OSTI2026

Quasiparticle spectroscopy in tantalum films with different Ta/sapphire interfaces

Moirangthem, Bicky Singh [Ames Lab; Iowa State U.]↗

DOE OSTI2025

Application of lipid-stabilized liquid-liquid interfaces in 3D printing of biomaterials

Developing strategies to stabilize liquid-liquid interfaces is essential for advancing applications in various biomedical systems. This study introduces a novel biocompatible in situ-forming material in which lipid self-assembly stabilizes water–oil interfaces, enabling controlled structuring of liquids through liquid-in-liquid 3D printing. The stabilization process, driven by the formation of nanostructures at the interface, is thoroughly analyzed through small-angle X-ray scattering (SAXS), rheometry, and microscopy techniques. This material system enables the fabrication of complex 3D constructs, including fibers, substrates, and microneedle patches, which exhibit outstanding mechanical properties and biocompatibility, as confirmed by tensile testing and cell viability tests. Here, by leveraging the unique properties of lipid-stabilized interfaces, this work demonstrates the potential of this approach for diverse biomedical applications such as drug delivery and tissue engineering while establishing a foundation for future advancements in liquid-in-liquid 3D printing technology.

36 MATERIALS SCIENCE↗

DOE OSTI2023

Silica modulated palladium catalyst with superior activity for the selective catalytic reduction of nitrogen oxides with hydrogen

A significant promotion effect of colloidal SiO 2 on Pd/TiO 2 catalyst for improving the activity and N 2 selectivity in the selective catalytic reduction of NO with H 2 (H 2 -SCR) was reported, both before and after hydrothermal aging. The SiO 2 addition not only benefited the formation of more oxygen vacancies but also increased Pd dispersion and created rich Pd-SiO 2 interfaces on Pd-SiO 2 /TiO 2 catalyst. The H 2 -SCR of NO on both Pd/TiO 2 and Pd-SiO 2 /TiO 2 followed a Langmuir-Hinshelwood mechanism, in which the adsorbed bridging bidentate nitrates on TiO 2 could react with dissociated H 2 species on Pd sites at Pd-TiO 2 interface. Particularly, on the promoted Pd-SiO 2 /TiO 2 , the Pd-TiO 2 interface could facilitate NO adsorption and activation, and the created Pd-SiO 2 interface could benefit H 2 adsorption and dissociation, thus contributing to its significantly improved H 2 -SCR activity. Additionally, the active Pd species (which should be Pd0 under reaction condition with higher surface concentration) within Pd-SiO 2 /TiO 2 could be well stabilized during long-term hydrothermal aging process through the formation of rich Pd-SiO 2 interfaces.

36 MATERIALS SCIENCE↗

DOE OSTI2021

Exposure History and its Effect Towards Stabilizing Li Exchange Across Disordered Rock Salt Interfaces

Abstract The application of lithium rich disordered rock salts (DRX) as cathode materials has greatly expanded the materials space for high energy density cathodes. These materials are able to consistently achieve capacities higher than via a complex percolation based intercalation mechanism. Most current DRX materials face significant capacity fade when cycled over an extended period. One of the factors responsible for this could be deleterious side effect of interface reactions between the electrode and electrolyte at high voltage. We aim to focus on one aspect of this interaction, i.e the effect of exposure to electrolyte on the surface and its effect on the electrochemical properties of (LMNOF) powder. LMNOF was systematically treated in an electrolyte solution for varying periods of time at an elevated temperature. Treated samples exhibit surface layer modification (removal of F rich surface layer), leading to a 10 % improvement in the capacity retention behavior of LMNOF. Surface and bulk based measurements indicate an increase in disorder and gradual removal of F and Li. All of these processes mimic an aging process similar to cycling. This a priori formed interface allows for increased stability with respect to retention of capacity and oxygen loss.

Satish, Rohit↗

DOE OSTI2025

Influence of build direction on the fracture mechanism of 3D printed octet lattices

Here, we investigate the effects of 3D printing build directions on the fracture properties of octet lattice metamaterials made of polylactic acid (PLA) and how these effects vary with the relative density of the lattices. Single-edge notch bend samples are 3D printed in two orthogonal build directions at various relative densities. Our results show that the work of fracture for octet lattices with build directions parallel to the crack plane is significantly higher than those with build directions perpendicular to the crack plane. We also observed that the ratio of specific work of fracture between the two build directions remains nearly constant across different relative densities. In contrast, the ratio of peak load between the two build directions decreases as relative density increases. Furthermore, the build direction dictates the fracture mechanism. While the perpendicular build direction predominantly results in a brittle (mode I) fracture, the parallel build direction leads to a complex, delamination-dominated (mode II type) fracture. This phenomenon is largely governed by the weak interfaces formed between the printed layers and their interaction with the lattice geometry. These results reveal that the build direction governs the fracture mechanism and work of fracture of these lattice metamaterials and is therefore an important design consideration.

3D printed PLA↗

DOE OSTI2022

Variable Daily Autocorrelation Functions of High-Frequency Seismic Data on Mars

Abstract High-frequency seismic data on Mars are dominated by wind-generated lander vibrations, which are radiated partially to the subsurface. Autocorrelation functions (ACFs) of seismic data on Mars filtered between 1 and 5 Hz show clear phases at ∼1.3, ∼2.6, and ∼3.9 s. Daily temporal changes of their arrival times (dt/t) correlate well with the daily changes of ground temperature, with ∼5% daily variation and ∼50 min apparent phase delay. The following two mechanisms could explain the observations: (1) the interference of two predominant spectral peaks at ∼3.3 and ∼4.1 Hz, assumed to be both lander resonance modes, generate the apparent arrivals in the ACFs; (2) the interference of the lander vibration and its reflection from an interface ∼200 m below the lander generate the 3.3 Hz spectral peak and ∼1.3 s arrival in the ACFs. The driving mechanism of the resolved dt/t that most likely explains the ∼50 min delay is thermoelastic strain at a near-surface layer, affecting the lander–ground coupling and subsurface structures. The two outlined mechanisms suggest, respectively, up to ∼10% changes in ground stiffness at 1–5 Hz and ∼15% velocity changes in the top ∼20 m layer. These are upper bound values considering also other possible contributions. The presented methodology and results contribute to analysis of ACFs with limited data and the understanding of subsurface materials on Mars.

Geochemistry & Geophysics↗

DOE OSTI2021

Studying Interfacial Dark Reactions of Glyoxal and Hydrogen Peroxide Using Vacuum Ultraviolet Single Photon Ionization Mass Spectrometry

Aqueous secondary organic aerosol (aqSOA) formation from volatile and semivolatile organic compounds at the air–liquid interface is considered as an important source of fine particles in the atmosphere. However, due to the lack of in situ detecting techniques, the detailed interfacial reaction mechanism and dynamics still remain uncertain. In this study, synchrotron-based vacuum ultraviolet single-photon ionization mass spectrometry (VUV SPI-MS) was coupled with the System for Analysis at the Liquid Vacuum Interface (SALVI) to investigate glyoxal dark oxidation products at the aqueous surface. Mass spectral analysis and determination of appearance energies (AEs) suggest that the main products of glyoxal dark interfacial aging are carboxylic acid related oligomers. Furthermore, the VUV SPI-MS results were compared and validated against those of in situ liquid time-of-flight secondary ion mass spectrometry (ToF-SIMS). The reaction mechanisms of the dark glyoxal interfacial oxidation, obtained using two different approaches, indicate that differences in ionization and instrument operation principles could contribute to their abilities to detect different oligomers. Therefore, the mechanistic differences revealed between the VUV SPI-MS and ToF-SIMS indicate that more in situ and real-time techniques are needed to investigate the contribution of the air–liquid interfacial reactions leading to aqSOA formation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2020

Electrically Detected Magnetic Resonance Study of High-Field Stress Induced Si/SiO 2 Interface Defects.

It is widely accepted that the breakdown of Si0 2 gate dielectrics is caused by the buildup of stress-induced defects over time. Although several physical mechanisms have been proposed for the generation of these defects, very little direct experimental evidence as to the chemical and physical identity of these defects has been generated in the literature thus far. Here, we present electrically detected magnetic resonance (EDMR) measurements obtained via spin-dependent recombination currents at the interface of high-field stressed Si/Si0 2 metal-oxide-semiconductor field effect transistors (MOSFETs).

36 MATERIALS SCIENCE↗

DOE OSTI2023

Neural Network Enhanced RKPM for Electrochemical-Mechanical Coupled Damage Modeling of Energy Storage Materials

Energy storage materials undergo significant charge cycling, which makes understanding their reliability and durability fundamental in predicting performance and service life. Strong electrochemical-mechanical coupling and highly anisotropic material properties contribute to the formation and propagation of micro-cracking, largely along material interfaces and grain boundaries. For Li-ion batteries, for example, lithium moving between electrodes during charging and discharging process causes expansion and contraction of grains, and the strongly anisotropic and nonlinearly [Li]-dependent grain material properties can cause grains to expand into and contract away from each other, leading to chemo-mechanical cracking. In the first part of this work, a RKPM based computational framework for solving the coupled solid-phase lithium conservation with Fickian diffusion and the lithium concentration dependent anisotropic mechanical problem subjected to a highly nonlinear Butler-Volmer boundary condition is introduced. The choice of RKPM completeness conditions for lithium concentration and mechanical deformation fields, and the variational consistency condition for the domain integration of the coupled problem is first determined. In the second part of this work, a neural network-enhanced reproducing kernel particle method (NN-RKPM) [1] is leveraged to accurately capture damage and crack propagation throughout the material, by learning the location, orientation, and sharpness of discontinuity while allowing for a coarser nodal distribution than that is necessary for capturing sharp solution transitions using traditional mesh-based methods. NN-RKPM is used to inform how crack opening and closure in turn affect the coupled chemical equations and material microstructure.

damage modeling↗

DOE OSTI2020

A comparative study on the physicochemical characteristics of nanoparticles released in vivo from CoCrMo tapers and cement–stem interfaces of total hip replacements

The good biocompatibility and corrosion resistance of the bulk CoCrMo alloy has resulted in it being used in the manufacture of implants and load bearing medical devices. These devices, however, can release wear and corrosion products which differ from the composition of the bulk CoCrMo alloy. The physicochemical characteristics of the particles and the associated in vivo reactivity are dictated by the wear mechanisms and electrochemical conditions at the sites of material loss. Debris released from CoCrMo hip bearings, taper junctions, or cement–stem interfaces can, therefore, have different chemical and morphological characteristics, which provide them with different in vivo toxicities. Here, we propose to assess and compare the characteristics of the particles released in vivo from CoCrMo tapers and cement–stem interfaces which have received less attention compared to debris originating from the hip bearings. The study uses state–of–art characterization techniques to provide a detailed understanding of the size, morphology, composition, and chemistry of the particles liberated from the wear and corrosion flakes from revised hip replacements, with an enzymatic treatment. The phase analyses identified Cr 2 O 3 nanoparticles released from tapers and cement–stem interfaces, whose composition did not vary with origin or particle morphology. The size distributions showed significantly smaller particles were released from the stems, compared to the particles originating from the corresponding tapers. Furthermore, the investigation demonstrates that the tribocorrosive processes occurring at the taper and stem interfaces both result in Cr 2 O 3 nanoparticle formation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2026

Performance of Heterostructural TaC/AlGaN Schottky Diodes Based on First Principles Electronic Structure Properties

Advances in ultra-wide bandgap materials, such as high Al-content AlxGa1-xN (AlGaN), are essential for next generation power electronics, but the requirement for lattice matched substrates is currently a significant obstacle. Recently, conductive TaC has emerged as a promising virtual substrate for AlGaN heteroepitaxy, with wurtzite (0001) AlxGa1-xN lattice-matched to rocksalt (111) TaC at x ~ 0.5. Thus, understanding and controlling the electronic properties of the TaC/AlGaN interface is key for developing technological applications based on TaC/AlGaN devices. Using density functional theory and electronic structure calculations, we here investigate TaC/Al0.5Ga0.5N interfaces, where we include explicit alloy models in the slab calculations. We predict the Schottky barrier height and the electric field discontinuity resulting from interface charges. Considering all possible combinations of (Ta, C) substrate termination, (Al/Ga, N) nucleation, and (Al/Ga, N) polarity, we construct a chemical potential phase diagram to identify the stable interfaces that can be accessed through variation of the synthesis conditions. The predicted interface electronic properties are implemented in device performance simulations to demonstrate a practical design for a strain-free, high-efficiency TaC/AlGaN Schottky diode with a low barrier height and without interface charges, underscoring the potential of TaC as a substrate for ultra-wide bandgap devices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

DOE OSTI2022

Red-Ox Robust SOFC Stacks for Affordable, Reliable Distributed Generation Power Systems

While SOFC systems are expected to operate reliably and with limited degradation in steady state or transient performance, SOFC stacks may ultimately fail due to the loss of structural integrity of one or several of the cells as a result of the weakening of the materials and interfaces due to physico-chemical changes that occur during continuous operation as a result of plastic and creep deformations, modification of the temperature profile, and/or degradation of the electrochemical performance of the cells. Degradation mechanisms originating from the cell components include coarsening of the microstructure over time; decomposition of materials; chemical reaction of electrode materials with electrolyte at the interface; delamination from each other; and for the anode, coking and sulfur poisoning. Of all the reliability issues that may occur for SOFCs, the main limitation for Ni-based cermet anodes (e.g., NiO-YSZ) is the poor stability during reduction-oxidation (red-ox) cycling. This project was aimed at the development of ceramic anode SOFCs based on SFCM (SrFe0.2Co0.4Mo0.4O3), which is a conductive perovskite that is red-ox stable. Additionally, the project involved the development of a red-ox robust stack. Scale up of SFCM-based cells to a large format (10 cm by 10 cm) cell size was achieved as well as a maximum power density of 0.9 W/cm 2 at 600 °C (>0.6 W/cm 2 at 0.6 V). Up to a 10-cell stack was successfully assembled and demonstrated, and cells showed similar performance in reformed, pipeline natural gas as in hydrogen. Finally, a 3-cell stack was red-ox cycled without degradation for 40 cycles at ~600 °C.

03 NATURAL GAS↗

DOE OSTI2025

High tensile alloy of copper to mitigate current collector deformation in silicon electrodes for lithium-ion batteries

The volumetric changes of silicon electrodes, along with the strong adhesive properties of certain binders, can lead to plastic deformation of the current collector and create damage in the electrode coating. Here, in this study, we report a detailed study of silicon coatings on a high-tensile alloy (HTA) foil of copper with strength over twice that of conventional copper foils. The HTA current collectors with high mechanical strength can mitigate plastic deformation upon continuous cycling. At moderate areal capacities (2.5–3 mAh cm −2 ), conventional copper foils show significant wrinkling after only a few electrochemical cycles, whereas the HTA foils remain intact. We demonstrate viability of the HTA foils in large format xx6395 pouch cells, in which the HTA current collectors remain intact even at an areal capacity of 4.5 mAh cm −2 ; in contrast, wrinkles form in conventional copper current collectors increasing the likelihood of lithium plating. Computational studies show that stresses generated during cycling of silicon electrodes are very high in the current collector and at the current collector-coating interface, explaining the wrinkling of conventional Cu foils. Our studies highlight importance of current collector to solve the electrochemical and chemo-mechanical performance challenges associated with high-loading silicon electrodes.

Chemo-mechanical degradation↗