SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The details and background used in the investigation of orbital servicing and payloads are presented. Topics discussed include review of previous models, application of servicing to communications satellites, assessment of spacecraft servicing, cost of servicing, and launch vehicle effects on spacecraft.
Forest Service studies for integrating remotely sensed data into existing information systems highlight a need to: (1) re-examine present methods of collecting and organizing data, (2) develop an integrated information system for rapidly processing and interpreting data, (3) apply existing technological tools in new ways, and (4) provide accurate and timely information for making right management decisions. The Forest Service developed an integrated information system using remote sensors, microdensitometers, computer hardware and software, and interactive accessories. Their efforts substantially reduce the time it takes for collecting and processing data.
Design concepts are developed and evaluated for a cooled structures assembly for the Scramjet engine, for engine subsystems mass, volume, and operating requirements, and for the aircraft/engine interface. A thermal protection system was defined that makes it possible to attain a life of 100 hours and 1000 cycles. The coolant equivalence ratio at the Mach 10 maximum thermal loading condition is 0.6, indicating a capacity for airframe cooling. The mechanical design is feasible for manufacture using conventional materials. For the cooled structures in a six-module engine, the mass per unit capture area is 12.4 KN/sq m. The total weight of a six-module engine assembly including the fuel system is 14.73 KN.
The effects of angle of attack on supersonic mixed compression inlet performance at four different locations about a hypothetical forebody are given. A computational method to predict optimum inlet location, orientation, and centerbody control schedule for design and off-design performance is described. The effects of inlet location and a forward canard on the angle-of-attack performance of a normal shock inlet at transonic speeds were studied. Proper integration of inlet location and a forward canard can enhance the angle-of-attack performance of a normal shock inlet. Two lower lip treatments for improving the angle-of-attack performance of rectangular inlets at transonic speeds are discussed.
The technical progress made during the first 15 months of a planned 40-month project to provide a critical-technology data base for utility gas-turbine systems capable of burning coal-derived fuels is summarized. Tasks were included in the following areas: (1) combustion, to study the combustion of coal-derived fuels and conversion of fuel-bound nitrogen to NOx; (2) materials, to understand and prevent hot corrosion; and (3) system studies, to integrate and guide the other technologies. Significant progress was made.
There are no author-identified significant results in this report.
There are no author-identified significant results in this report.
Design concepts for the cooled structures assembly for the Langley Scramjet engine, for engine subsystems, and for the aircraft/engine interface were developed and evaluated. Results show that the objectives for the Scramjet engine can be met. A thermal protection system was defined that makes it possible to attain a life of 100 hours and 1000 cycles, which is the specified goal. With stoichiometric combustion, the fuel provides an adequate heat sink for cooling the engine at Mach numbers up to 9 at the minimum fuel flow condition. The mechanical design is feasible for manufacture using conventional materials. For the cooled structures in a six-module engine, the mass per unit capture area is 1328 kg/sq m (259 lb/sq ft). The total mass of a six-module engine assembly including the fuel system is 1577 kg (3477 lb).
The development and evaluation of a design concept for the cooled structures assembly for the Scramjet engine is discussed. Development concepts for engine subsystems and design concepts for the aircraft/engine interface are included. A thermal protection system was defined which makes it possible to attain a life of 100 hr and 1000 cycles, the specified goal. The coolant equivalence ratio at the Mach 10 maximum thermal loading condition is 0.6, indicating a capacity for airframe cooling. The mechanical design is feasible for manufacture using conventional materials. For the cooled structures in a six module engine, the mass per unit capture area is 1256 kg/sq m. The total mass of a six module engine assembly including the fuel system is 1502 kg.
The technical progress to provide a critical technology base for utility gas turbine systems capable of burning coal-derived fuels is summarized. Project tasks include the following: (1) combustion - to investigate the combustion of coal-derived fuels and the conversion of fuel-bound nitrogen to NOx; (2) materials - to understand and prevent the hot corrosion of turbine hot section materials; and (3) system studies - to integrate and guide the technological efforts. Technical accomplishments include: an extension of flame tube combustion testing of propane - Toluene Fuel Mixtures to vary H2 content from 9 to 18 percent by weight and the comparison of results with that predicted from a NASA Lewis General Chemical Kinetics Computer Code; the design and fabrication of combustor sector test section to test current and advanced combustor concepts; Testing of Catalytic combustors with residual and coal-derived liquid fuels; testing of high strength super alloys to evaluate their resistance to potential fuel impurities using doped clean fuels and coal-derived liquids; and the testing and evaluation of thermal barrier coatings and bond coatings on conventional turbine materials.
A generalized theory of radiative transfer is presented which includes single and multiple scattering of light in particulate surfaces, and is applicable to both the surfaces of atmosphereless bodies and to laboratory samples. Single scattering is described in terms of the effects of porosity and roughness, and is formulated by means of a probabilistic method. It is shown that, for low-albedo surfaces, the effects of porosity and roughness are separable, the opposition effect is caused by the former, and the slope of the linear part of the phase curve is mainly controlled by the latter. The theory, which is applicable to all albedos and phase angles, may be used in both surface brightness and integrated brightness studies. The limiting case of roughness and volume density tending to zero yields the results of classical radiative transfer theory.
High and low authority control integration; analytical studies, test model, disturbance rejection, LSS control, Toysat experiment, control hardware, slim beam test, plate experiments, and truss experimental results are presented.
Observations collected by a ground-based heterodyne receiver of an emission from the 7(0.7)-6(1.5) rotational torsional transition of H2O2 at 270.610 GHz are studied. An integrated spectrometer output of the data obtained at Mauna Kea, Hawaii in late May and early June of 1983 is presented. The removal of the ozone line background profile from the data is described. With no signal detected in the output of a 256-channel filter spectrometer the calculation of an upper limit on stratospheric H2O2 is possible. The utilization of the mixing ratio profile of Sze and Ko (1984) to compute the limit of H2O2 is examined. An upper limit for H2O2 of approximately 1 x 10 to the 14th/cu cm between 30-50 km is established.
The present investigation was conducted with the aim to evaluate the practicality and difficulties of modern control design methods for large space structure controls. The evaluation is used as a basis for the identification of useful computer-based analysis tools which would provide insight into control characteristics of a spacecraft concept. A description is presented of the wrap-rib antenna and its packaging concept. Attention is given to active control requirements, a mathematical model of structural dynamics, aspects of sensor and actuator location, the analysis approach, controllability, observability, the concept of balanced realization, transmission zeros, singular value plots, analysis results, model reduction, and an interactive computer program. It is pointed out that the application of selected control analysis tools to the wrap-rib antenna demonstrates several capabilities which can be useful during conceptual design.
NASA's Ocean Topographic Experiment (TOPEX), to be launched in 1991, is the first mission designed to reach the decimeter accuracy needed for the solution of the general mean circulation problem. An experimental tracking capability for TOPEX is studied using differential measurements with satellites of the U.S. DOD's Global Positioning System (GPS). Two data types are studied: (1) integrated Doppler from GPS carrier phase, and (2) GPS P-code pseudo-range. Results of covariance analysis predict that with differential GPS techniques, 5-10 cm average TOPEX altitude accuracies can be achieved over data arcs of two hours.
Results from a comprehensive investigation in which observations from several case studies are integrated with three-dimensional cloud model results to examine the general kinematic structure of downdrafts associated with High Plains precipitating convection are presented. One particular downdraft type, the low-level precipitation-associated downdraft, is the focus of this paper. General airflow and trajectory patterns within low-level downdrafts are convergent from 0.8 km upwards to downdraft top, typically less than 5 km AGL. Observed mass flux profiles often increase rapidly with height as a result of strong buoyancy forcing below the melting level. Inflow to the low-level downdraft, although vertically continuous can be separated into two branches. The up-down branch originating within the planetary boundary layer initially rises up to 4 km and then descends within the main precipitation-associated downdraft. The midlevel branch, usually more pronounced during early downdraft stages, originates from above the PBL and transports low-valued theta sub e air to low levels. The depth of the low-level downdraft can be approximated by the environmental sounding transition level, defined as the vertical height interval separating conditionally unstable to neutral air below from roughly stable air above. The low-level downdraft is most frequently located along the upshear storm flank relative to the updraft, although a downshear downdraft may become common under higher environmental wind shear.
Over the years, computer modeling has been used extensively in many disciplines to solve engineering problems. A set of computer program tools is proposed to assist the engineer in the various phases of the Space Station program from technology selection through flight operations. The development and application of emulation and simulation transient performance modeling tools for life support systems are examined. The results of the development and the demonstration of the utility of three computer models are presented. The first model is a detailed computer model (emulation) of a solid amine water desorbed (SAWD) CO2 removal subsystem combined with much less detailed models (simulations) of a cabin, crew, and heat exchangers. This model was used in parallel with the hardware design and test of this CO2 removal subsystem. The second model is a simulation of an air revitalization system combined with a wastewater processing system to demonstrate the capabilities to study subsystem integration. The third model is that of a Space Station total air revitalization system. The station configuration consists of a habitat module, a lab module, two crews, and four connecting nodes.
Thermal instability is believed to determine the evolution and formation of cool structures in the solar atmosphere such as the transition region and prominences (or filaments). The linear modes that arise in a sheared, force-free, magnetic field due to thermal instability are studied numerically. Previous studies have considered separately modes that arise due to the effects of radiation, compression, anisotropic thermal conduction, and ohmic heating. Here the results of such studies are integrated, first by presenting simple arguments that illustrate the essential physics of ideal, sheared-field, condensation modes, and second by showing numerically how finite resistivity affects the condensational instability in parameter regimes applicable to the solar corona.