Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “hydrothermal”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Geothermal Direct-Use Applications for the District Energy System in Bucharest, Romania

The city of Bucharest, Romania, hosts the second-largest district energy system (DES) in the world. Geothermal resources can be considered as a supplementary heat source to support the demand for domestic hot water and space heating in the winter and shoulder seasons. The National Laboratory of the Rockies (NLR) has conducted a study that considers geothermal energy to serve a fraction of the existing district heating network operated by Electrocentrale Bucure?ti (ELCEN), the utility operating the DES. Lower Cretaceous and Jurassic limestones make up the main geothermal aquifer underlying Bucharest, which hosts temperatures suitable for district heating (up to 90 degrees C to the north of the city). Anomalous geothermal gradients have been observed to the north of the city, where a pumped well has produced 82 degrees C brine at the wellhead to feed the Therme Bucharest Spa. An anomalous gradient has also been reported to the southeast of the city (35 degrees C/km). NLR modeled the building heating loads of a small portion of the DES (a block of nine prototypical buildings) in its Urban Renewable Building and Neighborhood Optimization (URBANopt ) platform. To simulate meeting a baseload benchmark of 20 MWth deliverable to a small portion of the DES, the NLR team used GEOPHIRES to model production scenarios for (1) hydrothermal systems coupled with heat pumps targeting the main geothermal aquifer in the north, (2) enhanced geothermal systems targeting hot dry rock in the southeast, and (3) huff-and-puff systems targeting a gradient of 25 degrees C/km. Finally, NLR conducted a high-level sensitivity study around the techno-economics of these systems. The outcomes of this work indicate that hot dry rock geothermal resources that can deliver at least 90 degrees C hot water to the Geothermal District Energy System (GeoDES) offer a possible solution for supplemental geothermal heat delivered to the existing DES.

15 GEOTHERMAL ENERGY↗
DOE OSTI2022

Recent Progress on Emerging Applications of Hydrochar

Hydrothermal carbonization (HTC) is a prominent thermochemical technology that can convert high-moisture waste into a valuable product (called hydrochar) at a relatively mild treatment condition (180–260 °C and 2–10 MPa). With rapidly growing research on HTC and hydrochar in recent years, review articles addressing the current and future direction of this research are scarce. Hence, this article aims to review various emerging applications of hydrochars, e.g., from solid fuel to soil amendment, from electron storage to hydrogen storage, from dye adsorption, toxin adsorption, heavy metal adsorption to nutrient recovery, and from carbon capture to carbon sequestration, etc. This article further provides an insight in the hydrochar’s working mechanism for various applications and how the applications can be improved through chemical modification of the hydrochar. Finally, new perspectives with appropriate recommendations have been made to further unveil potential applications and its improvement through hydrochar and its modified version.

09 BIOMASS FUELS↗
NASA NTRS1994

(abstract) Mount Rainier: New Remote Sensing Observations of a Decade Volcano

Mount Rainier was selected as a Decade Volcano by the International Association of Volcanology and Chemistry of the Earth's Interior. The purpose of this selection is to focus scientific and public attention on Mount Rainier during the current decade, the United Nations-designated International Decade of Natural Hazard Reduction. The Mount Rainier science plan calls for remote sensing surveys to monitor the volcano. To date, we have conducted airborne surveys with visible and near-infrared, thermal infrared, and interferometric radar instruments. Our preliminary analysis of some night-time time-series thermal infrared survey data sets of the summit suggests that, aside from seasonal variations in snow cover, there have been no qualitative changes in the size or pattern of the summit hot spots. Day-time airborne surveys were done to record the current surface appearance of the volcano and map hydrothermal alteration in the summit region. An interferometric radar survey yielded a high-resolution digital elevation model (DEM) which serves as a base for the registration of the other remote sensing data sets. More importantly, the DEM documents the current topography of glaciers and valleys. Planned biannual radar survey of mount rainier will produce a data set from which seasonal changes in glacier and valley topography can be characterized. Such characterization is essential if we are to recognize geothermally induced changes in snow and ice cover.

infrared radar interferometry glaciers seasonal va↗
NASA NTRS2011

Project Report: Undergraduate Student Research Program (USRP)

To better understand geochemical processes occurring on Europa's seafloor, we investigated the effects of varying Fe?content in the seafloor rock and varying temperature. Iron is important in such geochemical processes as the production of methane through serpentinization (e.g. Allen and Seyfried, 2003) and can be a nutrient for microbes (Russell and Hall, 2006; Park and Kim, 2001). It can also offer clues as to the state of differentiation of Europa's core/mantle. If Europa is fully differentiated and contains an iron core, we would expect there to be little iron in the mantle and ocean floor whereas a homogeneous Europa would have iron evenly dispersed throughout the ocean floor. Furthermore, the composition of the ocean is a result of water?rock interactions at the seafloor. This project investigated the effects of temperature on geochemical processes, comparing high temperature (> 250oC) hydrothermal vents (Kelley et al., 2001) to lower temperature (~20oC) cold seeps (e.g. Orphan et al., 2002).

Europa↗
NASA NTRS2016

Bubbles on Enceladus

Saturn’s icy moon, Enceladus, ejects frozen particles consisting of water and salts indicative of a subsurface ocean. Believed to originate from hydrothermal reactions near the core, the subsequent pressure drop generates boiling liquids that erupt and expand out of the tiger stripes. The purpose of this research is to simulate the ongoing geyser activity of Enceladus in the lab and to explore the concentrations of biomass which could exist in geyser bubbles as compared to ejected particles. We tested variance of intensity of light absorbed from the bubbles at different heights of the simulated plume. Anazodye, Allura Red, is a complex organic that will act as a tracer molecule allowing for quantitative analysis of light absorption through a spectrophotometer. Theazodye in combination with water is ejected from a water chamber using compressed air to simulate bubbles forming and a jet erupting from a body of water. Samples were taken of the bubbles at varying heights of the simulated plume as analogs to the Enceladus geysers. This research will provide quantitative analog information on rising bubbles from the ocean of Enceladus which can be applied directly to the practical concern of measuring biomass in the plume.

tiger stripes↗
DOE OSTI2021

Separations Consortium: Counter Current Chromatography

In support of the Bioenergy Technologies Office in recovering coproducts in biorefineries this project evaluates the use of Counter Current Chromatography (CCC) in recovering co-products from Reductive Catalytic Fractionation (RCF) oil, Alkaline Pretreatment Liquor (APL), aqueous phase Hydrothermal Liquefaction (HTL) oil, and Catalytic Fast Pyrolysis (CFP) oil. The project addresses three technology barriers in developing the bioeconomy; (1) Cost of production (2) Selective separation of organic acid species, and (3) Advanced bioprocess development. CCC is a unique, scalable, chromatographic technology that operates with two immiscible liquid phases moving counter current to one another. Unlike Simulated Moving Bed (SMB) technology, CCC is a true moving bed and because it uses liquids as both the stationary and mobile phase it can handle solids directly in the feed. This aspect of CCC allows it to skip the expensive filtration step needed prior to traditional SMB, furthermore the liquid phases are composed on relatively inexpensive organics (e.g. hexane and ethyl acetate). This project develops CCC methods for direct isolation of co-products from RCF oil, APL, HTL aqueous, and CFP oil. TechnoEconomic Analysis and process modeling is presented to compare CCC to SMB and assess its applicability in a holistic biorefinery. Initial results indicate approximately 4x reductions in solvent demand and 2x reduction in energy consumption compared to SMB.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2022

Bioconversion of Thermochemical Intermediates

Thermochemical (TC) biofuels production via both pyrolysis and hydrothermal liquefaction produces aqueous waste streams, typically with organic compounds at concentrations of -50-100 g/L. These streams represent a wastewater treatment cost and carbon loss for the TC biorefinery, but the concentration range for these compounds is ideal for bioconversion. To that end, the Bioconversion of Thermochemical Intermediates (BTI) project is developing advanced analytics and engineered microbes to convert these waste streams to co-products, with the overall aim of improving the economics and carbon conversion efficiency of TC biorefining. To date, we have primarily focused on development of advanced analytical chemistry approaches to fully characterize TC aqueous streams and engineering of Pseudomonas putida for conversion of non-conventional substrates, including methylated phenolics, cyclic ketones, furans, and C1-C3 light oxygenates, into atom-efficient products. Two primary challenges are the rapid deployment of aqueous-compatible analytics to changing upstream conditions and dealing with the toxicity of the feed streams to engineered microbes. The project efforts have resulted in engineered strains of P. putida able to consume 90% of the organic compounds in aqueous waste streams from catalytic fast pyrolysis, more than 300-fold toxicity tolerance improvements in P. putida, and carbon closures exceeding 90% for TC wastewater streams across multiple processing technologies.

BASIC BIOLOGICAL SCIENCES,BIOMASS FUELS↗
DOE OSTI2025

Synthesis of Yttrium Oxide Particles for Interfacial Water Radiolysis Studies

Radiolysis of water produces hydrogen gas (H2), posing safety issues for nuclear reactors. Metal oxides can impact H2 formation when water is present on metal oxide surfaces. This presentation focuses on the development of a controllable synthesis of spherical yttrium oxide (Y2O3), that later will be tested for H2 production in water radiolysis. Y2O3 was synthesized via hydrothermal hydrolysis precipitation to form yttrium hydroxide (Y(OH)3), followed by high temperature decomposition to form Y2O3. Various synthesis conditions were tested to determine their impact on particle morphology including reaction time, cooling rate, reactant concentration, and inert atmospheres. Through short reaction times and rapid cooling rate, spherical, relatively uniform particles of 350 nm were obtained. Despite inert atmospheres, carbonate formation occurred in all particles. A calcination temperature of 800°C is necessary to remove impurities. Future work will aim to reduce carbonate formation and improve particle uniformity. The synthetic procedure will be translated to other metal ions to study their impact on interfacial radiolysis.

08 - HYDROGEN↗
DOE OSTI2021

Manipulating Surface Termination of Perovskite Manganate for Oxygen Activation

For ABO 3 perovskite oxides, one of the key issues limiting their utilization in heterogeneous catalysis is the dominant presence of catalytically inactive A-site cations at the surface. The engineering of B-site terminated perovskites is considered as an effective method to address this issue, especially when dealing with Mn/Co-based perovskite catalysts. However, to date, such a strategy has not been fully successful and remains a major challenge in the field. Herein, a Mn-terminated La 0.45 Sr 0.45 MnO 3 (B-LSM) is successfully synthesized via a one-pot hydrothermal method, in which low-valence Mn ions partially occupy the A site to form the active Mn-excess phase. Additionally, experimental results and theoretical calculations reveal that the presence of the surface Mn termination in B-LSM optimizes the hybrid orbitals of Mn 3d-O 2p and promotes the activation of surface lattice oxygen, where the pristine inert lattice O 2- is evolved into active and stable lattice O 2-x . Such structural optimization significantly reduces the activation energy barriers on going from O 2 ⁻ species to important intermediate O - species during O 2 activation. Moreover, this results in good stability and Pt-like activity for the B-LSM during CO oxidation. This work offers a new chemical route for the design of advanced perovskite-type oxides possessing novel functions.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Electric-Field Manipulation of Magnetic Chirality in a Homo-Ferro-Rotational Helimagnet

Ferro-rotational (FR) materials, renowned for their distinctive material functionalities, present challenges in the growth of homo-FR crystals (i.e., single FR domain). This study explores a cost-effective approach to growing homo-FR helimagnetic RbFe(SO 4 ) 2 (RFSO) crystals by lowering the crystal growth temperature below the T FR threshold using the high-pressure hydrothermal method. Through polarized neutron diffraction experiments, it is observed that nearly 86% of RFSO crystals consist of a homo-FR domain. Notably, RFSO displays remarkable stability in the FR phase, with an exceptionally high T FR of ≈573 K. Furthermore, RFSO exhibits a chiral helical magnetic structure with switchable ferroelectric polarization below 4 K. Importantly, external electric fields can induce a single magnetic domain state and manipulate its magnetic chirality. The findings suggest that the search for new FR magnets with outstanding material properties should consider magnetic sulfates as promising candidates.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

Unveiling the Role of Critical Impurities in Spent LiFePO 4 Cathodes for Scalable Direct Regeneration

Direct regeneration offers a promising alternative to recycling End-of-Life (EoL) batteries by restoring metal elements and preserving the material structure, yet scaling these technologies to handle practical cathode black mass (CBM) with impurities remains challenging. Here, this study investigates the evolution of impurities, including aluminum (Al), polyvinylidene difluoride (PVDF) binder, and residual carbon (C), during direct recycling of spent LiFePO 4 (LFP) cathodes and their impact on electrochemical performance. Using various ex situ and in situ analyses, it is shown that the formation of lithium fluoride (LiF) during the traditional direct recycling process hinders lithium diffusion and deteriorates the reversible capacity. To address this major challenge, the combination of pH-controlled hydrothermal purification and the two-step sintering process is proposed effectively to regenerate spent LFP cathodes, eliminating the negative effect of Al and fluorine (F) impurities while mitigating any potential impacts of carbon residuals. The regenerated LFP from spent CBM achieves superior performance, retaining 152.5 mAh g −1 at 0.1 C and 133 mAh g −1 at 1 C with 98.7% capacity retention after 200 cycles. This approach is further validated using three distinct waste feedstocks from battery modules, enhancing impurity management and scalability in direct recycling. These findings present a sustainable and economically viable solution for large-scale LFP regeneration.

25 ENERGY STORAGE↗
DOE OSTI2022

Tunable CHA/AEI Zeolite Intergrowths with A Priori Biselective Organic Structure‐Directing Agents: Controlling Enrichment and Implications for Selective Catalytic Reduction of NOx

Abstract A novel ab initio methodology based on high‐throughput simulations has permitted designing unique biselective organic structure‐directing agents (OSDAs) that allow the efficient synthesis of CHA/AEI zeolite intergrowth materials with controlled phase compositions. Distinctive local crystallographic ordering of the CHA/AEI intergrowths was revealed at the nanoscale level using integrated differential phase contrast scanning transmission electron microscopy (iDPC STEM). These novel CHA/AEI materials have been tested for the selective catalytic reduction (SCR) of NOx, presenting an outstanding catalytic performance and hydrothermal stability, even surpassing the performance of the well‐established commercial CHA‐type catalyst. This methodology opens the possibility for synthetizing new zeolite intergrowths with more complex structures and unique catalytic properties.

Bello‐Jurado, Estefanía↗
DOE OSTI2022

What Is the Smallest Zeolite That Could Be Synthesized?**

Abstract Zeolites with a few unit cells are promising as catalyst and adsorbents. The quest to synthesize the smallest zeolites has recently resulted in 4 to 8 nm nanozeolites, about 2 to 4 unit cells. These findings pose the question of what is the smallest zeolite that could be obtained by hydrothermal synthesis. Here we address this question using molecular simulations and thermodynamic analysis. The simulations predict that amorphous precursors as small as 4 nm can crystallize zeolites, in agreement with the experiments. We find that interfacial forces dominate the structure of smaller particles, resulting in size‐dependent compact isomers that have ring and pore distributions different from open framework zeolites. The instability of zeolites smaller than 3±0.5 nm precludes a classical mechanism of nucleation from solution or through assembly of small nanoslabs.

Dhabal, Debdas↗
DOE OSTI2022

Simultaneously Enhanced Hydrophilicity and Stability of a Metal‐Organic Framework via Post‐Synthetic Modification for Water Vapor Sorption/Desorption

Abstract With increasing demands for high‐performance water sorption materials, metal‐organic frameworks (MOFs) have gained considerable attention due to their high maximum uptake capacities. In many cases, however, high overall capacity is not necessarily accomplishing high working capacity under operating conditions, due to insufficient hydrophilicity and/or water stability. Herein, we present a post‐synthetic modification (PSM) of MOF‐808, with di‐sulfonic acids enhancing simultaneously its hydrophilicity and water stability without sacrificing its uptake capacity of ≈30 mmol g −1 . Di‐sulfonic acid PSM enabled a shift of the relative humidity (RH) associated with a sharp step in water vapor sorption from 35–40 % RH in MOF‐808 to below 25 % RH. While MOF‐808 lost uptake capacity and crystallinity over multiple sorption/desorption cycles, the di‐sulfonic acid PSM MOF‐808 retained >80 % of the original capacity. PSM MOF‐808 exhibited good hydrothermal stability up to 60 °C and high swing capacity.

Luo, Tian‐Yi↗
DOE OSTI2022

Tunable CHA/AEI Zeolite Intergrowths with A Priori Biselective Organic Structure‐Directing Agents: Controlling Enrichment and Implications for Selective Catalytic Reduction of NOx

Abstract A novel ab initio methodology based on high‐throughput simulations has permitted designing unique biselective organic structure‐directing agents (OSDAs) that allow the efficient synthesis of CHA/AEI zeolite intergrowth materials with controlled phase compositions. Distinctive local crystallographic ordering of the CHA/AEI intergrowths was revealed at the nanoscale level using integrated differential phase contrast scanning transmission electron microscopy (iDPC STEM). These novel CHA/AEI materials have been tested for the selective catalytic reduction (SCR) of NOx, presenting an outstanding catalytic performance and hydrothermal stability, even surpassing the performance of the well‐established commercial CHA‐type catalyst. This methodology opens the possibility for synthetizing new zeolite intergrowths with more complex structures and unique catalytic properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Simultaneously Enhanced Hydrophilicity and Stability of a Metal-Organic Framework via Post-Synthetic Modification for Water Vapor Sorption/Desorption

With increasing demands for high-performance water sorption materials, metal-organic frameworks (MOFs) have gained considerable attention due to their high maximum uptake capacities. In many cases, however, high overall capacity is not necessarily accomplishing high working capacity under operating conditions, due to insufficient hydrophilicity and/or water stability. Herein, we present a post-synthetic modification (PSM) of MOF-808, with di-sulfonic acids enhancing simultaneously its hydrophilicity and water stability without sacrificing its uptake capacity of ≈30 mmol g -1 . Further, di-sulfonic acid PSM enabled a shift of the relative humidity (RH) associated with a sharp step in water vapor sorption from 35–40 % RH in MOF-808 to below 25 % RH. While MOF-808 lost uptake capacity and crystallinity over multiple sorption/desorption cycles, the di-sulfonic acid PSM MOF-808 retained >80 % of the original capacity. PSM MOF-808 exhibited good hydrothermal stability up to 60 °C and high swing capacity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Controlled Growth and Chemical Engineering of FeSe‐Based Superconducting Films

Abstract Chemical engineering tailors functional materials to meet the demands of physical and chemical properties, accelerating materials discovery and design in a multidisciplinary field. However, stereotyped synthetic paradigms in physical and chemical approaches obstruct the effective integration of multiple advantages of respective materials exploration methods. Solid state reaction is often considered separately with wet chemistry synthesis route, such as film growth using physical vapor deposition and hydrothermal methods. Here, the controlled growth of FeSe thin films by physical deposition techniques followed by the chemical engineering to create heterogenous interface in FeSe films via a solution‐based environment is demonstrated. The two‐step route allows an expanded crystal structure and enhanced superconducting transition temperature from 3.6 to 38 K, providing a new strategy to design functional hybrid materials.

Huang, Yulong↗