Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “flow field”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44
All sourcesNASA NTRSDOE OSTI
NASA NTRS1979

Numerical investigation of the perpendicular injector flow field in a hydrogen fueled scramjet

A computer program has been developed which numerically solves the full (elliptic) two-dimensional Navier-Stokes and specie equations near a slotted perpendicular hydrogen fuel injector in a scramjet engine. The program currently predicts the turbulent mixing of injected hydrogen fuel and air without reaction, and allows the study of separated regions of flow immediately preceding and following the injector as well as the complex shock-expansion structure produced by the injector in this region of the engine. Results are presented that describe the size of the separated regions near the injector as well as locations where ignition is likely to occur.

Drummond, J. P.↗
DOE OSTI2022

What Can Plastic Flow Fields Tell Us About Heat Sources in Deformation Processing?

We characterize primary (shape-change) and secondary (friction) deformation, and associated temperature fields, in metal cutting and forming processes, using in situ imaging and simulation. The experimental configurations enable access to the deformation zones and die contact-interfaces, for measuring deformation, temperature, and frictional drag. Infra-red thermography reveals that the plastic strain-rate field is an excellent proxy for the deformation-induced heat sources. Both spatially confined and diffuse strain-rate fields occur, depending on the initial workpiece deformation state. When the strain rate is confined, as in pre-hardened material, the temperature modeling is much simplified, as the heat source is also now localized. However complex, microstructure-driven deformation modes, like sinuous flow in annealed metals, result in spatially diffuse strain-rate and body heat sources, more challenging to analyze. Furthermore, our unified measurements should be of value for accurately estimating the fraction of plastic dissipation that is converted into heat in large-strain deformation processes.

36 MATERIALS SCIENCE↗
NASA NTRS1975

Mean flow field and surface heating produced by unequal shock interactions at hypersonic speeds

Mean velocity profiles were measured in a free shear layer produced by the interaction of two unequal strength shock waves at hypersonic free-stream Mach numbers. Measurements were made over a unit Reynolds number range of 3,770,000 per meter to 17,400,000 per meter based on the flow on the high velocity side of the shear layer. The variation in measured spreading parameters with Mach number for the fully developed flows is consistent with the trend of the available zero velocity ratio data when the Mach numbers for the data given in this study are taken to be characteristic Mach numbers based on the velocity difference across the mixing layer. Surface measurements in the shear-layer attachment region of the blunt-body model indicate peak local heating and static pressure consistent with other published data. Transition Reynolds numbers were found to be significantly lower than those found in previous data.

Birch, S. F.↗
NASA NTRS1996

Demonstration and Analysis of Filtered Rayleigh Scattering Flow Field Diagnostic System

Filtered Rayleigh Scattering (FRS) is a diagnostic technique which measures velocity, temperature, and pressure by determining Doppler shift, total intensity, and spectral line shape of laser induced Rayleigh-Brillouin scattering. In the work reported here, this is accomplished by using a narrow line width, injection seeded Nd-YAG laser sheet to induce Rayleigh-Brillouin scattering from a gas flow. This light is passed through an optical notch filter, and transmitted light is imaged onto an intensified charge coupled display (CCD) camera. By monitoring the grayscale value at a particular pixel while the laser frequency is tuned, the convolution between the Rayleigh-Brillouin scattering profile and the filter transmission profile is attained. Since the filter profile can be independently measured, it can be deconvolved from the measuring signal, yielding the Rayleigh-Brillouin scattering profile. From this profile, flow velocity, temperature, and pressure are determined. In this paper the construction and characterization of the optical notch filter and a newly developed frequency apparatus are discussed.

Forkey, Joseph N.↗
NASA NTRS1975

Flow field characteristics and performance limitations of quasi-steady magnetoplasmadynamic accelerators

Measurements of terminal voltage, exhaust velocity, current and potential distributions in a quasi-steady MPD arc operating over a range of currents from 3 to 25 kA countervene previous indications of basic limitations on MPD performance. Terminal voltage fluctuations, previously used as an indicator of a unique limiting value of the parameter current squared over mass flow, are shown to be related to cathode surface area rather than to interelectrode plasma phenomena. With improved electrodes and insulators, satisfactory arc operation at specific impulses somewhat beyond previously proposed limits has been demonstrated, and the significant thrust producing mechanisms in such arcs have been identified.

Boyle, M. J.↗
NASA NTRS1999

Investigation of the Rocket Induced Flow Field in a Rectangular Duct

Several tests were performed on a one-sixth scale Rocket Based Combined Cycle (RBCC) engine model at the University of Alabama in Huntsville. The UAH RBCC facility consists of a rectangular duct with a vertical strut mounted in the center. The scaled strut consists of two supersonic rocket nozzles with an embedded vertical turbine between the rocket nozzles. The tests included mass flow, flow visualization and horizontal pressure traverses. The mass flow test indicated a c:hoked condition when the rocket chamber pressure is between 200 psi and 300 psi. The flow visualization tests narrowed the rocket chamber pressure range from, 250 psi to 300 psi. Also, from this t.est, an assumption of a minimum <area choke was made. Horizontal pressure traverses were performed at locations both upstream and downstream of the nozzle exit plane. These traverses aided in examining the induced airflow due to the ejector effect and the growth of the: boundary layer in the strut sidewall gap.

Landrum, D. Brian↗
NASA NTRS1988

Miniaturized compact water-cooled pitot-pressure probe for flow-field surveys in hypersonic wind tunnels

An experimental investigation of the design of pitot probes for flowfield surveys in hypersonic wind tunnels is reported. The results show that a pitot-pressure probe can be miniaturized for minimum interference effects by locating the transducer in the probe support body and water-cooling it so that the pressure-settling time and transducer temperature are compatible with hypersonic tunnel operation and flow conditions. Flowfield surveys around a two-to-one elliptical cone model in a 20-inch Mach 6 wind tunnel using such a probe show that probe interference effects are essentially eliminated.

Ashby, George C.↗
NASA NTRS1987

Application of digital holographic interferometry to pressure measurements of symmetric, supercritical and circulation-control airfoils in transonic flow fields

Six airfoil interferograms were evaluated using a semiautomatic image-processor system which digitizes, segments, and extracts the fringe coordinates along a polygonal line. The resulting fringe order function was converted into density and pressure distributions and a comparison was made with pressure transducer data at the same wind tunnel test conditions. Three airfoil shapes were used in the evaluation to test the capabilities of the image processor with a variety of flows. Symmetric, supercritical, and circulation-control airfoil interferograms provided fringe patterns with shocks, separated flows, and high-pressure regions for evaluation. Regions along the polygon line with very clear fringe patterns yielded results within 1% of transducer measurements, while poorer quality regions, particularly near the leading and trailing edges, yielded results that were not as good.

Torres, Francisco J.↗
NASA NTRS1986

Application of digital holographic interferometry to pressure measurements of symmetric, supercritical, and circulation control airfoils in transonic flow fields

Six airfoil interferograms were evaluated using a semiautomatic image-processor system which digitizes, segments, and extracts the fringe coordinates along a polygonal line. The resulting fringe order function was converted into density and pressure distributions and a comparison was made with pressure transducer data at the same wind tunnel test conditions. Three airfoil shapes were used in the evaluation to test the capabilities of the image processor with a variety of flows. Symmetric, supercritical, and circulation-control airfoil interferograms provided fringe patterns with shocks, separated flows, and high-pressure regions for evaluation. Regions along the polygon line with very clear fringe patterns yielded results within 1 percent of transducer measurements, while poorer quality regions, particularly near the leading and trailing edges, yielded results that were not as good.

Torres, Francisco J.↗
NASA NTRS1982

Three-dimensional flow field in the tip region of a compressor rotor passage. I - Mean velocity profiles and annulus wall boundary layer

A rotating three-sensor, hot-wire probe has been used along with rotor blade static pressure measurements to investigate the complex inviscid and viscid effects in the annulus wall flowfield, including the three components of mean velocity, turbulence intensity, and turbulence stress inside the rotor blade passage. It is found that the tip leakage flow originates near quarter-chord, with peak values occurring near mid-chord. The leakage flow, which is in the form of a jet within the blade row, is augmented by the blade rotation and travels further away from the suction surface than that observed in stationary blade rows and cascades. This leakage flow tends to roll up between the mid-passage and the pressure surface near the tip region; the vortex formation does not occur within the passage in this particular case.

Lakshminarayana, B.↗
NASA NTRS1988

Digital image processing for quantification through full flow field tracing (FFFT) in narrow geometries at low Reynolds numbers

This paper introduces a computer based image processing technique to the field of nonintrusive velocity measurements in fluid mechanics. The method is presented with two alternatives: the first is involving intense interaction between the operator and the computer system; the second is a first generation artificial intelligence based system, where a set of initially imputed rules replaces the operator. The methods are applied to flow in narrow gaps.

Braun, M. J.↗
NASA NTRS1982

The modeling and prediction of multiple jet VTOL aircraft flow fields in ground effect

An engineering methodology based on an empirical data base and analytical fluid dynamic models was developed for the prediction of propulsive lift system induced aerodynamic effects for multiple lift jet VTOL aircraft operating in the hover mode in and out of ground effect. The effects of aircraft geometry, aircraft orientation (pitch, roll) as well as height above ground are considered. Lift jet vector and splay directions fit the airframe, lift jet exit flow conditions, and both axisymmetric and rectangular nozzle exit geometry are also accommodated. The induced suckdown flows are computed from the potential flowfield induced by the turbulent entrainment of both the free jets and wall jets in ground effect and from the free jets alone out of ground effect. The methodology emphasized geometric considerations, computation of stagnation lines and fountain upwash inclination, fountain upwash formation and development, and fountain impingement on the airframe.

Kotansky, D. R.↗
NASA NTRS1993

Gas flow-field induced director alignment in polymer dispersed liquid crystal microdroplets deposited on a glass substrate

Polymer dispersed liquid crystal thin films have been deposited on glass substrates by the processes of polymerization and solvent evaporation induced phase separation. The electron and the optical polarization microscopies of the films reveal that PDLC microdroplets formed during the process of phase separation near the top surface of the film remain exposed and respond to shear stress due to air or gas flow on the surface. Optical response of the film to an air flow-induced shear stress input on the free surface has been measured. Director orientation in the droplets changes with the applied shear stress leading to time varying transmitted light intensity. Director dynamics of the droplet for an applied step shear stress has been discussed from free energy considerations. Results on the measurement of light transmission as a function of the gas flow parameter unambiguously demonstrate the potential of these systems for use as boundary layer and gas flow sensors.

Parmar, D. S.↗
NASA NTRS1984

Canonical solutions for unsteady flow fields

The initial value problem of one-dimensional gas-dynamics involving discontinuous, nonuniform initial data is discussed. Canonical solutions which are valid in a small x, t region aroung a discontinuity, and which include the first order effects of nonuniformities in the data, are derived explicitly. The theory is derived by considering a group of elementary piston problems. Solutions with a shock or with a centered expansion wave are worked out individually in order to relate initial flow properties and their gradients to the speed and acceleration of the discontinuity waves. They are then combined to represent the solution of a general initial value problem by regarding the piston path as a contact line. In addition, problems with chemical reaction are discussed in terms of elementary piston problems which involve strong detonation waves, Chapman-Jouguet detonation waves, and deflagration waves.

Liu, G. C.↗
NASA NTRS1993

CFD analysis of hypersonic, chemically reacting flow fields

Design studies are underway for a variety of hypersonic flight vehicles. The National Aero-Space Plane will provide a reusable, single-stage-to-orbit capability for routine access to low earth orbit. Flight-capable satellites will dip into the atmosphere to maneuver to new orbits, while planetary probes will decelerate at their destination by atmospheric aerobraking. To supplement limited experimental capabilities in the hypersonic regime, computational fluid dynamics (CFD) is being used to analyze the flow about these configurations. The governing equations include fluid dynamic as well as chemical species equations, which are being solved with new, robust numerical algorithms. Examples of CFD applications to hypersonic vehicles suggest an important role this technology will play in the development of future aerospace systems. The computational resources needed to obtain solutions are large, but solution adaptive grids, convergence acceleration, and parallel processing may make run times manageable.

Edwards, T. A.↗
NASA NTRS1982

Three dimensional flow field inside compressor rotor, including blade boundary layers

The Reynolds stress equation, pressure strain correlation, and dissipative terms and diffusion are discussed in relation to turbulence modelling using the Reynolds stress model. Algebraic modeling of Reynolds stresses and calculation of the boundary layer over an axial cylinder are examined with regards to the kinetic energy model for turbulence modelling. The numerical analysis of blade and hub wall boundary layers, and an experimental study of rotor blade boundary layer in an axial flow compressor rotor are discussed. The Patankar-Spalding numerical method for two dimensional boundary layers is included.

Galmes, J. M.↗
NASA NTRS1976

Particle and flow field measurements by laser holography

Holograms make transmission recordings of aerodynamic events which are real-illuminated with ground-glass light diffusers and with no requirements for precision. The three-dimensional interferograms can be recorded by stored-beam, double-exposure, and double-plate techniques. Weak traveling shock waves, generated by rotating blade rows of an aircraft fan compressor, can be visualized by rapid double-exposure holograms recorded with a ruby laser. The same laser technique can also determine flow velocities from holograms of small flow-entrained particles. Particles larger than one-quarter millimeter are recorded under rear diffuse illumination conditions. Smaller particles can be recorded by their own forward scattering of laser light through the sensitivity of the holographic process for weak signals. Since the holographic apparatus can be path-matched, both particle and flow interferograms can be recorded with lasers of short coherence length.

Wuerker, R. F.↗