Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “favorability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Application of a Novel Heat Pump Model for Estimating Economic Viability and Barriers of Heat Pumps in Dairy Applications in the United States

Heat pumps represent an important opportunity for energy savings and decarbonization. This work investigates the techno-economic performance of high-temperature heat pumps (HTHPs) for use in the U.S. dairy industry. The studied heat pump performs a 50 °C temperature lift on a waste heat stream of cleaning water and applies the upgraded heat stream to a fluid milk pasteurization process. This work involved the creation of a HTHP model that estimated the coefficient of performance (COP), internal rate of return (IRR), net present value (NPV), and payback period (PBP), and emissions saved for a heat pump replacing a natural gas boiler. Capital costs, operations, and maintenance (O&M) cost, heat pump lifetime, electricity prices, natural gas prices, and a cost of carbon were varied to perform a parametric study on the factors affecting the break-even price of HTHPs. The results show that HTHP economics are highly sensitive to COP and energy price environment, and less sensitive to capital and O&M cost variance, leading to a large scatter of positive and negative NPVs based on U.S. location. PBPs demonstrate a defined threshold, based on energy price environment, below which favorable two-to-three-year PBPs predominate. This work is focused on the U.S. dairy industry, but international application in relation to fossil vs. electricity price regimes. Heat pumps have seen wider adoption in regions with a high ratio of fossil energy to electricity prices ($/MMBTU vs. $/kWh). The U.S. has plentiful natural gas resulting in lower fossil energy prices which has reduced heat pump adoption. This paper identifies potential first mover industries for HTHP adoption and their associated price regimes even in regions with lower ratios of fossil energy to electricity prices that exist many places globally.

ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATION,↗
DOE OSTI2022

CO 2 utilization potential of a novel calcium ferrite based looping process fueled with coal: Experimental evaluation of various coal feedstocks and thermodynamic integrated process analysis

Here, conversion of CO 2 to CO was performed at 800-850C via reduction of calcium ferrite (CaFe 2 O 4 ) with coal followed by oxidation of reduced CaFe 2 O 4 with CO 2 to produce CO and partially oxidized Ca ferrite. The process was evaluated with several types of coals which included lignite, sub-bituminous, bituminous, anthracite and pet-coke. Reduction of CaFe 2 O 4 with sub-bituminous coal and lignite coal was more favorable than that with higher rank coals. Stable reactivity performance was demonstrated for 35-cycle test conducted with lignite coal/CaFe 2 O 4 at 800°C and with high conversion of CO 2 to CO. The rate of conversion of CO 2 to CO with reduced CaFe 2 O 4 was found to be 1st order with respect to CO 2 and had a low activation energy of 7.4 kJ/mol. Thermodynamic integrated process assessments suggest that two and three reactor process concepts can be realized and net CO 2 utilization achievable. The two reactor configuration shows the highest potential for CO 2 utilization while generating a value-added CO rich syngas stream.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Can Wholesale Electricity Markets Achieve Resource Adequacy and High Clean Energy Generation Targets in the Presence of Self-Interested Actors?

Wholesale electricity markets are intended to incentivize system generation investments and operations outcomes that meet evolving system needs. In this work, we evaluate the effectiveness of wholesale market structures, rules and policies in achieving system resource adequacy (RA) and clean energy targets in the presence of self-interested generation investors using the Electricity Markets and Investment Suite Agent-based Simulation (EMIS-AS) model. Results highlight that both capacity markets and operating reserve demand curves (ORDCs) can help achieve a reliable system but with different RA compliance timelines and distribution of generation technologies. Structures with capacity markets tend to favor more capital-intensive peaking technologies while reducing wind and solar build-outs due to suppressed energy and clean energy market prices, particularly in the absence of strong clean energy targets. Conversely, ORDCs improve the commitment of available generation units, but this comes at the expense of higher system costs and renewable generation curtailment. We also find that well-calibrated static capacity demand curves can yield similar reliability and total cost compared to capacity market demand curves informed dynamically by resource adequacy while also yielding stable annual capacity prices. Different approaches to formulating ORDC curves can also yield key trade-offs, namely that a more efficient treatment of storage chronology results in lower ORDC curves and prices, yielding less investment and cost but at the expense of reliability. Finally, the effectiveness of wholesale electricity markets in practically achieving very high clean energy generation targets highly depends on the cost-competitiveness of clean energy technologies that can support critical balancing needs across multiple timescales.

capacity expansion↗
DOE OSTI2024

Multi-year analysis of physical interactions between solar PV arrays and underlying soil-plant complex in vegetated utility-scale systems

Concerns over the land use changes impacts of solar photovoltaic (PV) development are increasing as PV energy development expands. Co-locating utility-scale solar energy with vegetation may maintain or rehabilitate the land's ability to provide ecosystem services. Previous studies have shown that vegetation under and around the panels may improve the performance of the co-located PV and that PV may create a favorable environment for the growth of vegetation. While there have been some pilot-scale experiments, the existence and magnitude of these benefits of vegetation has not been confirmed in a utility-scale PV facility over multiple years. In this study we use power output data coupled with microclimatic measurements in temperate climates to assess these potential benefits. Here this study combines multi-year microclimatic measurements to analyze the physical interactions between PV arrays and the underlying soil-vegetation system in three utility-scale PV facilities in Minnesota, USA. No significant cooling of PV panels or increased power production was observed in PV arrays with underlying vegetation. Fine soil particle fraction was the highest in soils within PV arrays with the vegetation which was attributable to the lowest wind speeds from the compounding suppression of wind by vegetation and PV arrays. Soil moisture and soil nutrient response to re-vegetation varied between PV facilities, which could be attributed to differing soil texture. No statistically significant vegetation-driven panel cooling was observed in this climate. This finding prompts a need for site-specific studies to identify contributing factors for environmental co-benefits in co-located systems.

14 SOLAR ENERGY↗
DOE OSTI2025

Evaluating advanced nuclear fission technologies for future decarbonized power grids

Advanced nuclear fission, which encompasses various innovative nuclear reactor designs, could contribute to the decarbonization of the United States electricity sector. However, little is known about how cost-competitive these reactors would be compared to other technologies, or about which aspects of their designs offer the most value to a decarbonized power grid. We employ an electricity system optimization model and a case study of a decarbonized U.S. Eastern Interconnection circa 2050 to generate initial indicators of future economic value for advanced reactors and the sensitivity of future value to various design parameters, the availability of competing technologies, and the underlying policy environment. These results can inform long-term cost targets and guide near-term innovation priorities, investments, and reactor design decisions. We find that advanced reactors should cost $\$5.7$–$\$7.3$/W to gain an initial market share (assuming 30 year asset life and 3.5 %–6.5 % real weighted average cost of capital), while those that include thermal storage in their designs can cost up to $\$6.0$/W–$\$7.7$/W (not including cost of storage). Since the marginal value of advanced fission reactors declines as market penetration increases, break-even costs fall ~32 % at 100 GW of cumulative capacity and ~51 % at 300 GW. Additionally, policies that provide investment tax credits for nuclear energy create the most favorable environment for advanced nuclear fission. In conclusion, these findings can inform near-term resource allocation decisions by stakeholders, innovators and investors working in the energy technology sector.

Capacity expansion↗
DOE OSTI2025

Microreactor-liquid metal battery system in energy markets: An evaluation of potential costs, technology, and policy impacts

Microreactors represent an emerging innovation in the nuclear industry; yet have been overshadowed by their high capital costs. With the Inflation Reduction Act of 2022 (IRA), new opportunities have emerged to improve the economics of microreactor systems. This work examines liquid metal batteries (LMB) as a value-adding technology as part of microreactor-LMB systems within three U.S. electricity markets: ERCOT, PJM, and MISO. Our investigation considers key uncertainties: the cost of microreactors, the performance of LMBs, and the eligible tax credit levels. To this end, we use a dispatch optimization to trace not only the changes in system economics but also to provide a granular picture of energy delivery within the systems. We find that even with favorable costs for microreactors, significant regional variations in the project sizing and returns exist across the markets. Our heuristic method identifies their non-electric application potentials beyond electricity and technical requirements to maximize returns. The results suggest that 12–39 % of reactor heat could be cost-effectively diverted to produce more valuable by-products in U.S. markets. Including the impacts of tax credits, we establish the outcomes of each provision with varying rates. Coupling an LMB to a microreactor consistently improves the net present value of a microreactor compared to its standalone operation. In conclusion, for reasonable assumed conditions, we quantify a heterogeneous impact of round-trip efficiency (RTE) and extended LMB service life across the three markets—a one-year extension in LMB service life is roughly equivalent to a 2.11 % improvement in RTE for ERCOT, 1.16 % for PJM, and 1.04 % for MISO.

22 - GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2025

Assessing Climate Change-Induced Variability in Generation Potential and Droughts of Renewable Energy Systems in India

Solar photovoltaic (PV) and wind energy systems are crucial for decarbonizing the electricity sector and achieving climate goals. However, these systems are weather-dependent, and ignoring the potential changes in their generation levels due to climate change could compromise achieving climate targets and meeting future electricity demand. This study evaluates the impact of climate change on the generation potential of wind and solar PV systems in India for three future periods, 2030 (2021-2040), 2050 (2041-2060), and 2070 (2061-2080) compared to the baseline year 2000 (1991-2010), under three emission scenarios: SSP245, SSP370, and SSP585. Solar PV generation levels consistently decline (up to 10 %) across all regions and scenarios. Wind energy shows more pronounced variability (-20 % to 30 %). The South and Southeastern regions of India show improvements in wind potential across all scenarios and time periods. This study also investigated the projected changes in the generation droughts of both energy systems. For solar PV, drought days increase across most regions (exceeding 500 days under SSP370 across the 20-year period). In contrast, wind energy sees a reduction in drought days, especially in parts of South and Southeast India (declines exceeding 50 days across different scenarios). For both energy systems, the patterns of generation drought and generation potential are similar, and indicate that Western and Northern India may be less favorable for the future expansion of solar PV and wind energy, respectively. These results highlight the need to account for the potential impacts in future capacity planning.

14 SOLAR ENERGY↗
DOE OSTI2026

SAF: a promising approach to meet growing jet fuel demand

SAF provides a promising approach to aid the rising jet fuel demand from increased travel around the world and reduce the lifecycle emissions from the aviation sector. Although the feasibility of SAF pathways has been demonstrated through economic and environmental metrics quantification, the models used to quantify these variables have a high degree of variability in terms of accuracy and thereby reliability. To understand how to adopt and commercialize SAF, we need to harmonize these process models and assess metrics and technical limitations related to their production technologies. We find the production cost of SAF using hydro processed fatty acids and esters (HEFA), Fischer-Tropsch (FT), and alcohol-to-jet (ATJ) to be $\$$3-$\$$6/gallon gasoline equivalent (gge) and life cycle emissions to be lower than Jet A, except for ATJ using corn grain (≤25%). HEFA utilizing oil feedstocks has the lowest production cost (~$\$$2.9/gge) and highest jet yield (>150 gge/dry ton), while FT has the largest emission reduction (94%) compared to fossil jet. A unique contribution of this study is a comparative analysis of metrics related to SAF processes across technical, economic, and sustainability aspects. A cross-comparison of these metrics shows HEFA using fats, oils, and grease have the most favorable ratings, while HEFA using algae and ATJ using corn stover have more neutral and unfavorable ratings, respectively. These ratings can be improved by implementing the right combination of practical and technological advancements.

09 BIOMASS FUELS↗
DOE OSTI2021

Colloidal metal transport in soils developing on historic coal mine spoil

Chemical weathering of pyrite via oxidative dissolution is well-known for generating Fe(III)-bearing colloids at acid mine drainage (AMD) sites; however, the potential for physical weathering of pyrite-bearing materials and subsequent release and transport of colloidal pyrite and associated trace metals has not been studied. Here, we monitored the colloidal metal transport in soil developing on abandoned coal mine spoil with a history of AMD generation to systematically study the contribution of colloids to base and trace metal transport and determine the elemental and mineralogical composition of colloids. Additionally, we collected soil pore water using lysimeters with a pore size of approximately 1.3 μm and centrifugation was used to separate the colloids from aqueous fractions. Metal concentrations of Na, Ca, Mg, K, Si, Al, Mn, Fe, Cu, and Zn were analyzed. Our results show only 14% of the total Al and Cu were present in colloidal fractions whereas 23%, 43%, and 54% of Fe, Mn, and Zn were transported in the colloidal phase, respectively. In contrast, all base metals were primarily present in the aqueous concentration with a small fraction (<10%) present in the colloidal phase. The colloidal fractions of the base metals were inferred to be associated with the concentration of clay colloids. The release of colloids exhibited possible sensitivity toward weather conditions such as alternating high temperatures and rainfall during summer (May–July) compared to fall (August–November). The morphology, elemental, and mineral composition of colloids were determined by a scanning electron microscopy equipped with energy dispersive spectroscopy (SEM-EDS) and X-ray diffraction (XRD). Colloids were dominated by phyllosilicates (biotite, muscovite, and kaolinite) with minor quartz and feldspars. Other minerals phases identified in colloidal fractions were hematite, goethite, arsenopyrite, and chalcopyrite. Colloids consisting of Fe, S, and O with structures resembling framboidal pyrite were identified, which is consistent with the non-silicates minerals identified by XRD. Our study suggests that the physical weathering of pyrite in the mine spoil can generate colloidal pyrite, which is mobilized and transported by soil pore water. Our results also indicate that these pyritic colloids are associated with toxic trace metals including Cu, Mn, and Zn. Colloid mobilization is also impacted by changes in temperature and precipitation, where clay mobilization afer rain events is favored. Further, sudden spikes in aqueous and/or colloidal concentrations may be the result of local heterogeneity within soils developing on mine spoil, indicating that further field-based work is necessary to better characterize pore-scale processes that control aqueous and colloid transport at similar sites to have a better understanding of potential contaminant transport from mine spoil systems.

58 GEOSCIENCES↗
DOE OSTI2025

Permeate fluxes from desalination of brines and produced waters: A reactive transport modeling study

The increasing interest in the use of membrane systems to desalinate inland brackish water, agricultural drainage, and industrially produced wastewater demands improved means of predicting desalination system performance under variable feedwater compositions. The interaction among water flow, solute transport, and chemical composition in these systems impacts permeate flux evolution. Here, an established multicomponent reactive transport simulator that accounts for these coupled processes is applied to compute osmotic pressure and permeate fluxes in reverse osmosis (RO) systems. The model is first validated by predicting permeate fluxes for a set of benchtop crossflow experiments subject to a range of feed flow rates and compositions, under fouling and non-fouling conditions. Results compare favorably with measured data that show that solutions with similar total dissolved solids concentrations but different compositions result in different permeate fluxes. The model is then applied to predict permeate fluxes from the desalination of produced waters using a commercial spiral wound RO module. For NaCl-dominant brines, at total dissolved salt concentrations (TDS) below about 70 g/L, permeate fluxes are inversely proportional to water mole fraction as the latter is a reasonable approximation of water activity (i.e. ideal mixing). In the case of Ca–Cl-, Na–CO3- and Na–SO4-dominant brines below about 70 g/L TDS, this relationship does not hold as well and tends to overpredict osmotic pressure and thus underpredict permeate fluxes. However, the opposite becomes true at higher TDS values for typical produced waters. The scaling potential of these waters is also computed by allowing the precipitation of minerals above their saturation limit on the RO membrane. This work demonstrates how reactive transport models developed for the analysis of waters from geological systems can be extended to improve process design, optimization, and control in desalination systems from produced waters and beyond.

Molins, Sergi↗
DOE OSTI2022

Extreme hardness at high temperature with a lightweight additively manufactured multi-principal element superalloy

Materials are needed that can tolerate increasingly harsh environments, especially ones that retain high strength at extreme temperatures. Higher melting temperature alloys, like those consisting primarily of refractory elements, can greatly increase the efficiency of turbomachinery used in grid electricity production worldwide. Existing alloys, including Ni- and Co-based superalloys, used in components like turbine blades, bearings, and seals, remain a performance limiting factor due to their propensity, despite extensive optimization efforts, for softening and diffusion-driven elongation at temperatures often well above half their melting point. To address this critical materials challenge, we present results from integrating additive manufacturing and alloy design to guide significant improvements in performance via traditionally difficult-to-manufacture refractory alloys. We present an example of a multi-principal element alloy (MPEA), consisting of five refractory elements and aluminum, that exhibited high hardness and specific strength surpassing other known alloys, including superalloys. The alloy shows negligible softening up to 800°C and consists of four compositionally distinct phases, in distinction to previous work on MPEAs. Density functional theory calculations reveal a thermodynamic explanation for the observed temperature-independent hardness and favorability for the formation of this multiplicity of phases.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Caught in headlights: Captive white-tailed deer responses to variations in vehicle lighting during imminent collision scenarios

Vehicle collisions with deer (Odocoileus spp.) cause billions of dollars in damages and injure thousands of drivers every year in the United States, and few mitigation methods have proven effective. However, recent research suggests that vehicle lighting might influence white-tailed deer (Odocoileus virginianus; hereafter, deer) responses to oncoming vehicles. Most new vehicles are manufactured with light emitting diode (LED) headlights which differ in total radiance and wavelength of light emitted compared to the previous industry standard of tungstenhalogen (halogen) headlights. Also, frontal vehicle illumination through rear-facing lighting has shown promise in enhancing deer responses to vehicles, but its effectiveness has not been tested under various headlight conditions (headlight type or intensity). As such, it remains unclear how these aspects of vehicle lighting affect deer responses to an approaching vehicle. We used 23 captive, wild-type deer to investigate how variations in vehicle lighting affect deer responses to an approaching vehicle at night, when most collisions occur. We released deer into a 95 m long, 3 m wide chute and approached them from the opposite end with an electric golf cart outfitted with two versions of stock 2017–2020 Ford Fusion headlights (LED and halogen) and a 51 cm rear-facing lightbar to test how vehicle lighting affected deer avoidance behaviors in an imminent, head-on collision scenario. Each deer received eight lighting treatments consisting of unique combinations of headlight type (LED vs. halogen), light intensity (low vs. high beam), and rear-facing lighting (lightbar off vs. on). We measured deer alert and flight behavior using infrared videography. We found that the halogen, high beam, lightbar off treatment had the greatest probability of evoking an alert response. Furthermore, when the lightbar was off, high beams appeared to increase alert probability for halogen headlights. Also, we found evidence that high beam, halogen headlights tend to increase alert probability over high beam, LED headlights, when the lighbar was off. We found no effect of our lighting treatments on deer alert distance, flight probability, or flight initiation distance. Across all behavioral responses, the random effect deer ID explained 0.86–9.19 × more variation than our lighting treatments, reflecting large differences in responses among deer. Overall, we found that vehicle lighting can impact deer behavior during an imminent, head-on collision scenario, although lighting was ineffective at increasing favorable flight behaviors. Future research should investigate how vehicle lighting treatments affect free-ranging, wild deer in a variety of real-world scenarios and at longer approach distances.

White-tailed deer (Odocoileus virginianus) Deer be↗
DOE OSTI2020

Numerical and experimental analysis of precooled desiccant system

This paper presents a numerical and experimental study of four novel, desiccant air-conditioning systems based on pre-cooling of the ambient air. The purpose of the study is to: 1) establish which configuration is most profitable for the future studies through numerical and experimental methods; 2) verify the concept of precooled system and confirm that it is working in experimental conditions (for this purpose two prototypes of evaporative cooling units were developed and compared for different operation arrangements with desiccant wheel); 3) Analyze practical aspects of the systems, which includes water consumption analysis, economic analysis and establishing operational modes during a cooling season in temperate climate conditions (the proposed solution has a significant advantage during operation in a temperate climate, since it can utilize its first evaporative cooler the only source of cooling energy when the humidity of outdoor air allows to to meet the latent cooling load). Four arrangements of the system with different dew point evaporative air cooler prototypes were selected and developed for comparative analysis. The system was simulated as a whole, also, each component was individually tested on measurement station. develop the optimal arrangement of the system through numerical and experimental analysis. Four different performance indicators were considered: thermal COP (Coefficient Of Performance), the ERR (Energy Efficiency Ratio), coefficient a describing the potential in compensating indoor cooling loads, water consumption ratio. Also costs of the systems were compared through economic analysis. It was established that arrangement which is characterized by best-averaged performance in terms of all considered factors is a unit combined with two different types of evaporative coolers (marked as System B)- this is caused by the favorable arrangement of two units, where one is better suited to the pre-cooler role, while the other is better suited as the post-cooler.

42 ENGINEERING↗
DOE OSTI2024

Preparation of a 73 As source sample for application in an offline ion source

For the generation of beams with the offline ion source at the Facility for Rare Isotope Beams (FRIB), suitable source samples are required. Arsenic-73 is a frequently requested user beam due to its significance in nuclear structure studies and astrophysics. In this work, we outline the process of preparing a 73 As source sample, containing (5.76 ± 0.37)∗10 14 atoms of 73 As, which was successfully used to generate a 73 As beam for a multi-day user experiment. Silver arsenate was chosen as the chemical form, due to its favorable volatility within the designated operating temperature range. We refined the precipitation method using stable arsenic prior to its application with the 73 As sample, resulting in precipitation yields of (99.4 ± 4.5)%.

As-73↗
DOE OSTI2020

Atomistic modeling of energy band alignment in CdTe(1 0 0) and CdTe(1 1 1) surfaces

An atomic-scale perspective of energy band alignment in CdTe surfaces has not been spatially studied despite the major role surfaces play in forming interfaces within CdTe-based thin film photovoltaic devices. Atomistic modeling based on density functional theory coupled with surface Green’s function is used for calculating energy band alignment of CdTe surfaces. The CdTe(1 0 0) ((1×1) and c(2×2) reconstruction) and CdTe(1 1 1) ((1×1) and (2×2) reconstruction) facets without and with surface relaxation provide insightful band bending characteristics that influence charge carrier transport. Results show that unrelaxed (1×1) CdTe(1 0 0) and CdTe(1 1 1) surfaces bend the valence band downward with surface polarity dictating the surface potential magnitude. The reconstructed CdTe(1 0 0) c(2×2) and CdTe(1 1 1) (2×2) surfaces result in favorable surface electronic features in relation to their unreconstructed variants. In addition, the structurally relaxed CdTe(1 1 1) surfaces develop an internal energy cusp potential that may enhance hole charge transport toward the back of CdTe solar cell devices. In conclusion, energy band alignments calculated within the study lead to a detailed understanding of how CdTe surfaces may affect CdTe-based thin film photovoltaic applications.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Traction-separation response of bilayer graphene interfaces: The role of an intercalated single atomic layer of water molecules and hydroxyl groups

Molecular dynamics simulations of the normal and shear traction-separation response of dry and wet bilayer graphene interfaces were performed. The influence of a single, atomic layer of water molecules sandwiched between graphene layers and hydroxyl functionalization on one or both layers were investigated. Hydroxyl groups provided a shielding effect during normal separation while favoring stick-slip friction under sliding conditions. The single, atomic layer of water molecules confined between hydrophilic and asymmetric hydrophobic/hydrophilic surfaces was found to ease sliding friction. The mechanisms arose from the balance between the attractive and repulsive graphene/water interactions through bridges of single water molecules between the two surfaces and the structure of the water monolayer under confinement for which an out-of-plane water/water hydrogen bond network could not be developed. The single, atomic layer of water molecules reduced the sliding friction the most when both surfaces were hydrophilic and lowered the sliding friction of the asymmetric hydrophobic/hydrophilic interfaces to that when both surfaces were hydrophobic. An optimal hydroxyl surface coverage of less than 10% may exist for efficient water lubrication, with diminishing effect with increasing number of hydroxyl groups. Finally, the findings offer a design strategy for assembling bilayer graphene interfaces with tailored friction and sliding contact properties.

36 MATERIALS SCIENCE↗