Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “enzymatic”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Techno-Economic Case Study: Low-Temperature Conversion Performance Based on Isolated Anatomical Fractions of Corn Stover

This report summarizes analysis conducted to support a case study under the Feedstock-Conversion Interface Consortium (FCIC) focused on techno-economic analysis (TEA) modeling to quantify the yield and cost ramifications for processing isolated anatomical fractions of corn stover through a low-temperature conversion (biochemical pathway) biorefinery. It is hypothesized that different individual anatomical fractions of corn stover vary in composition and recalcitrance, such that processing each fraction on its own e.g. through dedicated campaigns may enable economic benefits relative to processing the whole stover material. To investigate this concept, we worked with FCIC researchers to obtain data on compositional analysis, as well as processing conditions and yields, for conversion of whole corn stover plus three individual anatomical fractions (cobs, husks, and stalks) across key steps of the biorefinery conversion process within FCIC research scope, namely pretreatment and enzymatic hydrolysis. After running the data through the TEA models, fractionated cobs and husks achieved higher fuel yields and lower minimum fuel selling prices than whole corn stover, but stalks fared worse than whole stover on both metrics. The most direct takeaway from this assessment is that a biorefinery would stand to benefit economically from maximizing the use of cob and husk fractions while avoiding or minimizing the use of stalks, though recognizing practical constraints with this approach in maintaining an equivalent processing capacity (fixed at 2,000 dry metric tonne per day in all cases).

09 BIOMASS FUELS↗
DOE OSTI2023

Catalytic Upgrading of Carbohydrates in Waste Streams to Hydrocarbons: Paper Sludge to Fuel Project (PStF)

This research, funded by the Department of Energy Bioenergy Technologies Office (DOE BETO), aims to understand the barriers and assess opportunities for transforming carbohydrates in paper sludge, a solid lignocellulosic residue from the pulp and paper industry. The goal is to turn the paper sludge into a liquid hydrocarbon product that can be blended into jet fuel, both economically and sustainably. Research groups at North Carolina State University, National Renewable Energy Laboratory, and Yale University collaborated synergistically, leveraging their expertise in pulp and paper operations, biomass deconstruction, and catalytic upgrading to propose a pathway that efficiently captures the energy in paper sludge. Findings from this study could potentially contribute to advancing biomass conversion technologies, aligning with the efforts of the U.S. DOE BETO. This report documents the experimental and simulation results of a biochemical and catalytic pathway designed to transform paper sludge into a liquid hydrocarbon product. The process involves a sequence of seven steps, including ash removal, carbohydrate enzymatic hydrolysis, sugar dehydration, solvent recovery, aldol-condensation between furans and ketone, hydrogenation, and hydrodeoxygenation to obtain a hydrocarbon blend in the ~C10 range. The experimental efforts from the initiation of the project were guided by techno-economic analysis (TEA) and sensitivity analysis results including around seventy-eight operational parameters. This methodology facilitated the efficient use of resources over time. This study relies on detailed process simulations and TEA to determine the minimum fuel selling price (MFSP) for the hydrocarbon fuel product. Preliminary TEA results led to the evaluation of eight case studies considering alternative dehydration co-solvents, operational settings, and biorefinery layouts. Finally, the life cycle assessment of twenty-eight scenarios, comparing various dehydration co-solvents, fuel sources, chemical feedstock sources, side product utilization, and other process settings, was conducted. Landfilling scenarios with and without landfill gas recovery were also estimated, analyzed, and compared.

09 BIOMASS FUELS↗
DOE OSTI2024

Dynamic structural determinants in bacterial microcompartment shells

Bacterial microcompartments (BMCs) are polyhedral structures that segregate enzymatic cargo from the cytosol via encapsulation within a protein shell. Unlike other biological polyhedra, such as viral capsids and encapsulins, BMC shells can exhibit a highly advantageous structural and functional plasticity, conforming to a variety of anabolic (CO 2 fixation in carboxysomes) and catabolic (nutrient assimilation in metabolosomes) roles. Consequently, understanding the subunit properties and associated protein–protein interaction processes that guide shell assembly and function is a necessary step to fully harness BMCs as modular, biotechnological nanomachines. Here, we describe the recent insights into the dynamics of structural features of the key BMC domain (Pfam00936)-containing proteins, which serve as a structural template for BMC-H and BMC-T shell building blocks.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

Developing Methods to Assess Changes in Mechanical Properties of Shale Modified by Engineered Mineral Precipitation

Fractures in subsurface shale formations serve multiple purposes, for example, in the recovery of resources in hydraulic fracturing or as potential harmful leakage passages through caprocks that may contribute undesired fluids to the atmosphere or functional groundwater aquifers. A proposed method to seal or influence fracture properties is Ureolysis-Induced Calcium Carbonate Precipitation (UICP), a bio-mineralization technology driven by the enzymatic hydrolysis of urea, resulting in the formation of calcium carbonate. Sporosarcina pasteurii is a common microbe used as the source of the urease enzyme that catalyzes the chemical reaction. The resulting calcium carbonate can bridge the gaps in fractured shale and reduce fluid flow through fractures. However, there is little information on how this process affects the mechanical properties of the resulting biomineralized shale. This study represents the first step toward determining the influence of UICP treatment on shale material and its subsequent mechanical strength properties. This methods development study aims to determine the effect that temperature has on the tensile strength of intact, unfractured shale cores (2.54 cm (1 in) diameter, 5.08 cm (2 in) long). Tensile strength was determined indirectly using a modified Brazilian test where the splitting tensile strength is attained by applying a compressive load onto the core. Shale cores from Eagle Ford and Wolfcamp formations were tested at both room temperature and 60°C to determine if increased temperature influences the tensile strength of the rock. This data will help to assess the necessity of testing biomineralized cores at temperature. Though 60°C may not mimic subsurface temperatures of the shales used in this study, it was chosen due to limitations of the UICP process while still approaching temperatures of shale formations. This project aims to evaluate what effect temperature has on the mechanical properties of intact shale cores so that engineered or natural rock fractures that are sealed by biomineralization can be better understood.

Bedey, Kayla↗
DOE OSTI2024

Identifying a novel pathway for extracellular electron uptake in Methanosarcina barkeri using shotgun

The overarching goal of this project was to identify the genetic and/or enzymatic basis for extracellular electron uptake in Methanosarcina barkeri—an organism we previously characterized to be capable of this process using poised potential electrodes and a range of electrochemical techniques. In our first aim, we will utilized proteomic techniques that labels extracellular proteins with free amine groups with biotin and perform a selective purification of these proteins from the rest of the proteome. These were identified using mass spectrometry, providing us insight into the identity of the cell surface proteins, including redox active proteins present during extracellular electron uptake. We will also used an isobaric tagging technique (iTRAQ labeling) of proteomes from different experiment conditions to look at differential proteins expression and better understand the total pathway involved in extracellular electron uptake coupled to methanogenesis. In our final aim, we will investigated the electrochemical nature of electron uptake in co-cultures, compared to our pure culture data sets. We predict the process of electron uptake from electrodes replicates what goes on in nature when these organisms for co-cultures with electrogenic microbes such as Geobacter, and to test this hypothesis we have begun to probe co-cultures electrochemically during direct interspecies electron transfer. Our final aim took much longer than expected due to challenges replicating co-cultures between Geobacter metallireducens and Methanosarcina barkeri. We found the major problem with this work was the inability of the M. barkeri strain we used (and we tried strains from three different labs) to successfully grow on acetate in the absence of hydrogen. As such, we began to use the strain Methanosarcina acetivorans—another close relative that specializes on acetate growth. We are currently in the process of comparing electrochemical observations of this microorganism between pure and co-culture experiments.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

Mechanistic Studies of a Primitive Homolog of Nitrogenase Involved in Coenzyme F430 Biosynthesis

Methyl-coenzyme M reductase (MCR) is the key enzyme in the biological formation and anaerobic oxidation of methane (AOM). Methane is a potent greenhouse gas and the major component of natural gas. Given the abundance of natural gas reserves in remote areas, there is great current interest in a scalable bio-based process for the conversion of methane to liquid fuel or other high-value commodity chemicals. MCR holds much promise for use in such a methane bioconversion strategy. However, MCR cannot currently be produced in an active form in a heterologous host, due in large part to the lack of genetic and biochemical information about the production of holo MCR. In an effort to overcome this deficiency, our laboratory elucidated the biosynthetic pathway of the unique nickel-containing coenzyme of MCR, F430. The key step in coenzyme F430 biosynthesis (Cfb) was found to involve an unprecedented reductive cyclization reaction that converts Ni-sirohydrochlorin a , c -diamide to 15,17 3 -seco-F430-17 3 -acid. This remarkable transformation, which involves a 6-electron reduction of the isobacteriochlorin ring system, cyclization of the c -acetamide side chain to form a γ-lactam ring, and the formation of 7 stereocenters, is catalyzed by a primitive homolog of nitrogenase (CfbCD). Nitrogenase is a two-component metalloenzyme that catalyzes the ATP-dependent reduction of dinitrogen to ammonia (nitrogen fixation). Homologs of nitrogenase are also involved in the biosynthesis of the photosynthetic pigments chlorophyll and bacteriochlorophyll. Phylogenetic analysis of the CfbCD complex suggests that it is representative of a more ancient lineage of the nitrogenase superfamily, and a thorough investigation of its structure and function is likely to shed light on the mechanisms and evolution of these important metalloenzymes that catalyze multi-electron redox reactions. Moreover, a detailed understanding of the mechanism of the CfbCD complex may aid in the development of specific inhibitors to help reduce natural greenhouse gas emissions and can be exploited for the heterologous production of MCR for methane bioconversion. Towards these goals, the following Specific Aims will be pursued to determine the: 1) Identity of the CfbCD reaction product. The exact reaction catalyzed by CfbCD, including the number of electrons transferred and whether it involves enzymatic cyclization, is unclear. Several approaches, including reaction stoichiometry measurements, spectroelectrochemistry, and magnetic resonance spectroscopy will be applied to elucidate the structure of the reaction product and establish whether CfbCD is a reductase or reductive cyclase. 2) Structure, conformational dynamics, and oligomerization state changes of CfbCD. Significant insight into the mechanism and allosteric regulation of CfbCD can be obtained by assessing changes in the structure and dynamics of the complex during the catalytic cycle. To accomplish this, a combination of size-exclusion chromatography, hydrogen-deuterium exchange mass spectrometry, molecular dynamics simulations, and high-resolution structural methods will be employed. 3) Source, order, and stereochemistry of proton additions during CfbCD catalysis. Details regarding the order and stereochemistry of proton additions during the CfbCD reaction will be uncovered using a combined spectroscopic and computational approach. Complementary mechanistic studies employing site-directed mutagenesis and substrate analogs will establish the identity of active site acid residues and the possible involvement of substrate-assisted catalysis during the CfbCD reaction.

09 BIOMASS FUELS↗
DOE OSTI2023

Sustainable production of plastic degrading enzymes

The 21st century faces the challenge of transitioning to a climate-neutral economy. This hurdle will need to be addressed in a myriad of approaches, including all societal spheres, as highlighted in several UN and EU reports, including new and accessed technologies. Among them, biotechnology can play a core role by exploiting its environmental benefits (e.g., substituting fossil-based products and expected greenhouse emission reductions). In some cases, biotech can even outperform fossil counterparts' features (e.g., the biodegradability of some bioplastics). Microalga is an attractive bioplastic feedstock in this scenario since it directly substitutes petroleum and captures CO2. However, albeit its environmental benefits, the microalgal process still needs to be tipped economically and the net-positive ecological impact improved to drive adoption. To that end, we envisioned the use of a green alga as a source of bioplastic feedstock and industrial enzymes, combining natural traits of microalgae with engineered properties in a resourceful process to petroleum-based products replacement. As proof of concept, we demonstrated that we could use C. reinhardtii, a green algae, to produce plastic-degrading enzymes. We assemble a vector to secrete PHL7, a recently described PETase, capable of degrading post-consumer PET plastic. We successfully engineered the cell line to secrete the plastic-degrading enzyme. We confirmed the secretion of the enzyme by observing halos in agar plates supplemented with plastic dispersions, enzymatic assays, zymograms, and protein sequencing of supernatant samples. This approach allows using green algae to replace petrochemical-derived plastic while producing the tool necessary to recycle existing plastics sustainably.

Dutra Molino, Joao Vitor↗
DOE OSTI2023

Green Biodegradation: Analysis of Potential Polyurethane-degrading Enzymes and Their Secretion in Chlamydomonas reinhardtii

Plastic pollution is a critical global issue, with only 5% of plastics currently recycled. Polyester polyurethane (PU), a widely used plastic, can potentially be broken down using enzymatic biodegradation rather than mechanical processing that generates microplastics. This study focuses on PS5, a potential PU-degrading enzyme with esterase activity, capable of cleaving ester bonds found in PU structures. Researchers investigated the expression and secretion of PS5 in the green microalga Chlamydomonas reinhardtii, a sustainable production platform capable of generating PU precursors such as lipids and diacids while sequestering carbon. Experiments demonstrated that PS5 significantly outperformed commercial lipase in cleaving the FDA substrate, indicating high esterase activity. Algal transformants expressing PS5 also showed halo formation on Impranil®-agar plates, suggesting PU dispersion degradation. These findings highlight C. reinhardtii as a viable chassis for the production and secretion of plastic-degrading enzymes, offering a sustainable route to both upcycle and degrade PU products at the end of their lifecycle.

Diaz, Crisandra Jade↗
DOE OSTI2022

Turning Food Waste into Biobased Products (CRADA Final Report)

As part of the Cyclotron Road program, the ZestBio project team investigated the production of chemical products from industrial agricultural byproducts and sustainable carbon sources. The goal of the research was to explore methods of manufacturing of new chemical products from renewable carbon that could address growing consumer and regulatory demands for environmentally-friendly and biobased chemicals. Previously, ZestBio and the technical founders developed enzymatic and chemical conversion technologies that transform abundant sugars found in these byproducts into value-adding, high performance chemicals.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2025

Evaluation of DNA Extraction Efficiency in Diverse Algae Strains Using Commercial Kits and Lysis Approaches

Efficient DNA extraction is essential for accurately monitoring microalgae communities in large-scale cultivation systems such as raceway ponds and wastewater ponds. Traditional phenol chloroform extracts are a staple in microbiology but are obsolete for routine sampling due to its high toxicity reagents and time intensive setups. Commercial DNA extraction kits are more favorable for the microbes found in these ponds, but lack specific kits made for these communities. Little is known about which kits perform the best, leading researchers to use a variety of different kits with inconsistent results. This project compared one precipitation based commercial kit (Lucigen Masterpure) and five wash based kits (Monarch, Zymo Quick-DNA, and three Qiagen DNeasy kits) using four brackish algae strains to determine which methods yield the greatest quantity and quality of genomic DNA. Extractions were evaluated using the manufacturers protocol, and additional pretreatment options were administered before a single kit to compare its potential in being added routinely before extractions. Pretreatment options included both cryogenic freeze-thawing and heat incubation using enzymes. DNA was quantified using Qubit fluorometry and NanoDrop purity ratios. Overall, the Qiagen PowerWater kit provided the highest DNA yield and purity, but at a significantly higher cost then the precipitation-based kit (MasterPure). It was also noted that while the precipitation-based kit was significantly cheaper, provided similar results, it took significantly more time to complete a single run. Cryogenic pretreatment (6x cycles) increased average DNA yields by up to 80%, whereas enzymatic pretreatment most improved purity ratios without substantially improving quantity. The results suggest that it may be more cost and time efficient to use Qiagen kits with the addition of lysis pretreatments to procure better results. Future works includes developing a better system to efficiently collect multi variable data, and to upscale to artificial polycultures using similar methodologies alongside sequencing to confirm kit results.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Enhancing chemical bioproduction with rational control of bacterial post-translational modifications

Efficient conversion of inexpensive feedstocks to valuable chemicals by microbes is critical for a robust bioeconomy, but the ability to rationally design bacteria is hampered by insufficient knowledge of how post translational modifications (PTMs) control bacterial protein function and thus bioproduction phenotypes. Our study will focus on the lysine acetylation, a ubiquitous bacterial PTM that can affect the function of enzymes in central metabolism that are often critical for bioproduction processes, disrupt transcriptional regulation, and reduce translation. However, most lysine acetylation data is observational, which means that we do not know when, how, and what specific acetylated residues affect protein function and bacterial physiology. For our model host, we will use a Pseudomonas putida strain that we previously engineered to convert lignocellulosic feedstocks into chemicals such as itaconic acid (ITA). With this strain, we use a dynamic two-stage bioproduction process in which ITA is produced during a non-growth associated production phase. Production is highest during growth stages when lysine acetylation is low in other organisms (early stationary phase) and stalls in conditions where acetylation is highest (late stationary phase). The switch from high to stalled ITA production is also correlated with an unexpected increase in acetate levels – the precursor to non-enzymatic lysine acetylation. As such, we predict that lysine acetylation plays a substantial role in regulating the metabolic pathways required for ITA production. We will develop a generalizable approach that combines high-throughput genetic screens and cutting-edge genome engineering with state-of-the-art proteomics, metabolomics, and genetic code expansion methods to identify and modulate lysine acetylation patterns in bacteria. Ultimately, these strategies aim to manipulate protein expression and acetylation patterns to enhance bioproduction phenotypes (e.g., sustained ITA production in late stationary phase).

60 APPLIED LIFE SCIENCES↗
DOE OSTI2025

Fundamental Research Aimed at Diverting Excess Reducing Power in Photosynthesis to Orthogonal Metabolic Pathways

Photosystems are incredible biological machines that use sunlight to drive the conversion of carbon dioxide to sugar. The amount of sunlight available for photosynthesis sometimes exceeds the amount of energy plants can use. This excess energy has to be safely dissipated through non-productive biological processes. The ultimate goal of this project is to understand whether we can utilize that otherwise unused excess energy. In our previous work, we showed that, in principle, it is possible to attach a catalyst to photosystem I and generate H2 using light. Our current strategy is to genetically fuse parts of the photosystem I complex with a recently discovered oxygen-tolerant [FeFe] hydrogenase. Our rationale is that such chimeric proteins may potentially result in the natural incorporation of the photosystem I-hydrogenase link using the inherent genetic machinery of the cell. In this project, we aim to verify that light-driven hydrogen production in this construction is possible. Throughout the project, we designed nanoconstructs that showcase the plausibility of this technology, at least in vitro. We take advantage of these constructs to investigate details of the coupling between photosystem I and a H2-producing enzyme called [FeFe] hydrogenase. This part of the project reveals details of the electron transfer between photosystem I and the attached hydrogenase, providing information that can lead to new strategies for improved biological photocatalysis. We also researched efficient and robust tethering of the [FeFe] hydrogenase to photosystem I in cyanobacteria. This work will highlight successful design strategies to guide the future development of photosynthetic biohybrids. Uncovering the principles governing the utilization of otherwise unusable energy significantly further our understanding of cyanobacterial photosynthesis. The work proposed establishes the feasibility of diverting excess energy under high light conditions to orthogonal enzymatic pathways and set design rules for efficient utilization of such a strategy for scientific and industrial applications in biosensing, renewable energy, and high-value chemicals production. The work addresses the DOE-BES Photosynthetic Systems program goal to develop a multidimensional understanding of photosystems that would provide specific metrics that instruct strategies for improving biological photosynthesis and for guiding the future development of bioreactors and biomimetic energy systems.

Photosynthetic systems, hydrogenase, cyanobacteria↗
DOE OSTI2025

A Computational Workflow of Elucidating Viral Impact on Mediating Microbial Response to In-situ Experimental Warming: Bridging microbial modeling to carbon and mineral modeling

Viruses are abundant in soils and shape microbial communities in ways that can potentially influence ecosystem processes, yet their contributions to carbon cycling and mineral transformations remain poorly understood. Here we present a multi-phase framework that links virus-host interactions to soil biogeochemistry by combining ecological simulations, genome- and community-scale metabolic modeling, and statistical and machine-learning analyses. We first calibrated microbial abundance profiles under explicit infection scenarios to capture how viral pressure alters community structure, then explored alternative interaction strategies, including kill-the-winner, piggyback-the-winner, and mixed lytic-lysogenic modes, through forward simulations. These ecological shifts were translated into metabolic consequences using exchange fluxes summarized into biologically meaningful categories, while integrated statistical and machine-learning screens elevated subtle but consistent signals. Application of this framework revealed that viral infections shift the balance between organic and inorganic fluxes, redirecting metabolism from diffuse organic transformations toward inorganic pools such as protons and CO 2 , directly linking viral regulation to respiration and soil carbon balance. The roll-up analysis also isolated perturbations in critical mineral ions, including magnesium, manganese, zinc, and copper, which serve as essential enzymatic cofactors. In piggyback-the-winner scenarios, uptake of these ions was strongly suppressed. Contrasting viral strategies produced distinct community structures and metabolic outcomes, from broad suppression under kill-the-winner dynamics to dramatic redistributions under high-lytic and high-gain lysogenic regimes that collapsed vulnerable microbial populations while promoting opportunists. Together, these results provide a tractable path to trace viral perturbations from host abundance shifts to metabolic flux adjustments and ecosystem-scale processes, offering a practical way to include viruses in earth system models.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Production of high-performance biodegradable polyurethane products made from algae precursors

We successfully developed and scaled the production of high-performance, fully biodegradable thermoplastic polyurethanes (TPUs) derived from algae-based precursors. By employing innovative flow chemistry and chemo-enzymatic methodologies, the research team produced materials with up to 100% bio-based content that match or exceed the mechanical properties of traditional petroleum-based plastics. These algae-derived TPUs were proven to be fully home-compostable, achieving over 90% decomposition within 110 to 120 days while demonstrating practical advantages such as reduced solvent requirements in fabric coating applications.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Functional characterization of glycosyltransferases in duckweed to enable predictive biology

Glycosyltransferases (GTs) catalyze the formation of glycosidic linkages to produce almost all complex carbohydrates. This project used a multi-disciplinary, high-throughput (HTP) biochemical and computational biology approach focused on duckweed as a model energy crop, to study carbohydrate metabolic processes. To achieve this, developed and carried out out high-throughput (HTP) functional characterization of plant glycosyltransferases (GTs) role of enzymatic microenvironments be assessed through a combined proteomic and computational biology approach, and the combined data was used to populate deep-learning frameworks to predict plant GT function. Functional validation achieved through this research is being used to assign gene function and study plant processes at the systems level to efficiently link the genome sequence with gene function. Together, the combined approaches used within this study provide a foundation for how computational prediction, in combination with high-throughput functional validation, can be used to study plant processes at the systems level and translate knowledge gained to efficiently link genome sequence with gene function in a species agnostic manner.

09 BIOMASS FUELS↗
DOE OSTI2024

Reduced ribonucleotide reductase RRM2 subunit expression increases DNA damage and mitochondria dysfunction in woody breast chickens

Abstract OBJECTIVE The aim of this study was to investigate the roles of ribonucleotide reductase subunit M2 (RRM2; subunit of ribonucleotide reductase) in severe woody breast (WB) and normal breast muscles. ANIMALS 40 8-week-old male Ross-708 broiler chickens. METHODS Quantitative PCR was performed to determine gene expression, and commercial ELISA/assay kits were used to obtain several enzymatic activities. RESULTS Results showed that RRM2 activity (P= .0002) and RRM2 (P= .05) and hydroxymethylbilane synthase expression (impaired oxygen transport and metabolism,P= .002) were reduced in WB, while caveolin-3 (defected membrane integrity,P= .09), endoglin (increased fibrosis,P= .06), and secreted protein acidic rich in cysteine (metabolic dysregulation,P= .09) expression tended to increase in WB. WB tended to have increased levels of homocysteine (P= .06), aspartate aminotransferase mitochondria (P= .02), pyruvate kinase (P= .04), DNA damage (P= .06), creatine kinase (P= .05), and triglyceride (P= .002) but decreased ATPase activity (P= .01), all indicating mitochondria dysfunction and tissue damage. CLINICAL RELEVANCE In this study, differences in various enzyme activities and increased DNA damage suggest that RRM2-mediated mitochondrial abnormalities may play a role in WB myopathy.

Veterinary Sciences↗
DOE OSTI2024

Two-dimensional heteronuclear single quantum coherence (HSQC) NMR spectra of lignin isolated from Populus trichocarpa residues after CELF pretreatment and CBP fermentation

Here we present a curated dataset of a series of two-dimensional heteronuclear single quantum coherence (HSQC) nuclear magnetic resonance (NMR) spectra of lignin isolated from a woody energy crop (Populus trichocarpa) residues after co-solvent enhanced lignocellulosic fractionation (CELF) pretreatment and consolidated bioprocessing (CBP) process. The natural poplar variant GW-9947 from the Center for Bioenergy Innovation (CBI) was used. The poplar was knife milled and passed through a 1 mm sieve. The CELF pretreatment was performed in a Parr autoclave reactor with 7.5 wt % solids loading, 0.5 wt% H2SO4 as catalyst at 150°C with 15, 25 and 30 minutes, respectively. Tetrahydrofuran was added in a 1:1 mass ratio with water as the pretreatment solvent. The residues from CELF pretreatment were then subjected to CBP using the bacterium C. thermocellum DSM 1313. CBP fermentations were performed at 60 °C in a shaker at 50 grams/L solids loadings. Lignin was isolated from the pretreated samples after ball-milling in a porcelain jar with ceramic balls via Retsch PM 200 at 580 rpm for 2.5 h followed by enzymatic hydrolysis in acetate buffer (pH 4.8, 50 °C) for 48 h. The lignin samples were characterized using 13C–1H HSQC experiments which were performed in a Bruker Avance III HD 500 MHz NMR spectrometer operating at a frequency of 125.12 MHz for the 13C nucleus. A standard Bruker pulse sequence was used on a Prodigy platform cryoprobe. The dry lignin samples were dissolved in deuterated dimethylsulfoxide for HSQC experiments. The spectra were acquired under the following acquisition conditions: 210 ppm spectral width in F1 (13C) dimension with 256 data points and 11 ppm spectral width in F2 (1H) dimension with 1024 data points, a 90° pulse, a one bond C–H coupling constant of 145 Hz, a 1.0 s pulse delay, and 64 scans. All the data was processed using the TopSpin 3.6 software (Bruker BioSpin). The NMR spectra provides structural characteristics information about lignin remaining in solids after CELF (150 °C with 15, 25 and 30 minutes) process and C. thermocellum CBP.

Lignin structure, HSQC, poplar, CELF, CBP, CBI↗
DOE OSTI2024

Lignin molecular weights of Populus trichocarpa residues after CELF pretreatment

Here we present a dataset of molecular weights of lignin from a woody energy crop (Populus trichocarpa) residues after a series of co-solvent enhanced lignocellulosic fractionation (CELF) pretreatment. The natural poplar variant GW-9947 from the Center for Bioenergy Innovation (CBI) was used. The poplar was knife milled and passed through a 1 mm sieve and CELF pretreatment was performed in a Parr autoclave reactor with 7.5 wt % solids loading, 0.5 wt% H2SO4 as catalyst at 150°C with various time. Tetrahydrofuran was added in a 1:1 mass ratio with water as the pretreatment solvent. Lignin was isolated from the pretreated samples after ball-milling in a porcelain jar with ceramic balls via Retsch PM 200 at 580 rpm for 2.5 h followed by enzymatic hydrolysis in acetate buffer (pH 4.8, 50 °C) for 48 h. The solid residue was isolated by centrifugation and hydrolyzed again with freshly added buffer and enzymes for another 48 h. After filtration, the solid residue was extracted twice with 96% (v/v) 1,4-dioxane/water mixture at room temperature overnight. The extracts were combined, rotary evaporated, and freeze-dried to recover lignin. The lignin samples were then derivatized in an acetic anhydride/pyridine (1:1, v/v) mixture and stirred at room temperature for 24 h. Ethanol was added to the reaction mixture, left for 30 min and then removed with a rotary evaporator. The addition and removal of ethanol was repeated at least 3 times until all traces of acetic acid were removed. Acetylated lignin samples were then dissolved in tetrahydrofuran (THF) at a concentration of 1.0 mg/mL. The molecular weight of acetylated lignin was measured by a gel permeation chromatography (GPC) on a PSS-Polymer Standards Service (Warwick, RI, USA) GPC SECurity 1200 system featuring Agilent HPLC 1200 components equipped with four Waters Styragel columns (HR1, HR2, HR4 and HR6) and an UV detector (270 nm). Tetrahydrofuran was used as the mobile phase and flow rate was 0.3 mL/min. The Polymer Standards Service WinGPC Unity software (Build 6807) was used for data processing for all the samples. The data provides information about the effects of CELF pretreatment time at 150 ºC on lignin molecular weights.

09 BIOMASS FUELS↗