SEARCH · Engineering Papers

Results for “electrons”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44

All sources NASA NTRS DOE OSTI

DOE OSTI2020

Direct electron acceleration in multi-kilojoule, multi-picosecond laser pulses

The physics mechanism behind the acceleration of electrons to energies much higher than the laser ponderomotive potential is reported. While electrons with these energies have been observed for the last twenty years at the one percent level, it is only with the recent advent of high power lasers with extended pulse durations, large focal spots, and high intensities that significant numbers (>10%) of the so-called “superponderomotive” electrons have been observed. Evidence is provided that the dominant acceleration mechanism of superponderomotive electrons is direct acceleration by the electromagnetic (EM) wave of the laser as they co-propagate in an under-dense plasma; one-dimensional particle-in-cell simulations yield electron spectra with typically ten times the ponderomotive temperature. Direct acceleration requires tens of plasma wavelengths of under-dense plasma, as well as pulse durations of tens of plasma periods, conditions that can be found in large focal spot multi-picosecond laser pulses. It is shown that the plasma simply provides the source of accelerated electrons and a variety of methods to inject a significant population of electrons into the EM waves at relativistic energy.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2020

Mixed quantum–classical approach to model non-adiabatic electron–nuclear dynamics: Detailed balance and improved surface hopping method

We develop a density matrix formalism to describe coupled electron–nuclear dynamics. To this end, we introduce an effective Hamiltonian formalism that describes electronic transitions and small (quantum) nuclear fluctuations along a classical trajectory of the nuclei. Using this Hamiltonian, we derive equations of motion for the electronic occupation numbers and for the nuclear coordinates and momenta. We show that, in the limit, when the number of nuclear degrees of freedom coupled to a given electronic transition is sufficiently high (i.e., the strong decoherence limit), the equations of motion for the electronic occupation numbers become Markovian. Furthermore, the transition rates in these (rate) equations are asymmetric with respect to the lower-to-higher energy transitions and vice versa. In thermal equilibrium, such asymmetry corresponds to the detailed balance condition. We also study the equations for the electronic occupations in the non-Markovian regime and develop a surface hopping algorithm based on our formalism. To treat the decoherence effects, we introduce additional “virtual” nuclear wave packets whose interference with the “real” (physical) wave packets leads to the reduction in coupling between the electronic states (i.e., decoherence) as well as to the phase shifts that improve the accuracy of the numerical approach. Remarkably, the same phase shifts lead to the detailed balance condition in the strong decoherence limit.

74 ATOMIC AND MOLECULAR PHYSICS↗

DOE OSTI2020

High electron mobility of Al x Ga1− x N evaluated by unfolding the DFT band structure

We calculate the alloy-disorder-limited electron mobility of AlxGa1−xN from first principles. AlxGa1−xN is a technologically important ultra-wide-bandgap alloy with promise in light emitting diodes and high-power transistors. Alloying introduces statistical disorder, which causes electrons to scatter between different crystal-momentum states, leading to a reduction in mobility for intermediate alloy compositions. The corresponding lifetime, which appears as an energy broadening in the band structure, can be evaluated by unfolding the band structure from the supercell basis to the primitive-cell basis. We fit the first-principles band broadening with a model scattering potential and evaluate the low-field electron mobility using the semiclassical Boltzmann transport equation in the relaxation-time approximation. Our calculated mobility is in agreement with experimental values. We also find the lowest alloy-scattering electron mobility (total electron mobility) across the entire composition range to be 186 cm2/V s (136 cm2/V s), which is comparable to the highest electron mobility predicted in the competitor system, β-(AlxGa1−x)2O3. Our results elucidate the intrinsic limits imposed by alloy disorder on electron transport in AlxGa1−xN.

Pant, Nick (ORCID:0000000254506045)↗

DOE OSTI2023

Ion-driven destabilization of a toroidal electron plasma—A 3D3V PIC simulation

Ion-driven destabilization of a toroidal electron plasma in a small aspect ratio axisymmetric toroidal device is reported for A r + ions of different initial density values using a high fidelity 3D3V PIC solver. Stability of a recently discovered quiescent quasi-steady state (QQS) of a toroidal electron plasma obtained from “seed” solution as a result of entropy extremization at zero inertia is addressed in the presence of a small ion population. An initial value (f0) of the ion fraction (f = n i / n e) and the corresponding secondary electrons are “preloaded” into the system after the electron plasma attains a QQS state. This procedure is regarded as a proxy to the conventional production of ions in the experimental devices via impact ionization. The resulting electron plasma exhibits destabilized “center of charge motion” (m = 1) along with higher order harmonics with dominant power in the second harmonic. Gradual loss of ions (and also electrons) is observed resulting in time varying f values. Beyond a certain value of f0 (≥ 0.005), growth in wall probe current is observed, which saturates at later simulation time due to the loss of particles. In conclusion, trajectories of ion particles indicate ion trapping in the potential well, which is qualitatively similar to the ion resonance instability in pure electron plasmas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2023

Probing local electron temperature and density inside a sheared flow stabilized Z-pinch using portable optical Thomson scattering

We report the first optical Thomson scattering measurements inside a high electron temperature (≳1 keV) and moderate electron density (mid 10 16 cm –3 ) plasma. This diagnostic has been built to provide critical plasma parameters, such as electron temperature and density, for Advanced Research Projects Agency-Energy-supported fusion-energy concepts. It uses an 8 J laser at 532 nm in 1.5 ns to measure the high frequency feature of the Thomson scattering profile at 17 locations along the probe axis. It is able to measure electron density from 5 × 10 17 cm –3 to several 10 19 cm –3 and electron temperatures from tens of eV to several keV. Here, in this paper, we describe the design, deployment, and analysis on the sheared flow stabilized Z-pinch machine at Zap Energy named FuZE. The probe beam is aimed at an axial distance of 20 cm from the central electrode and is timed within the temporal envelope of neutron emission. The high temperature and moderate density plasmas generated on FuZE lie in an unconventional regime for Thomson scattering as they are between tokamaks and laser-produced plasmas. We described the analysis considerations in this regime, show that the electron density was below 5 × 10 16 cm –3 at all times during these measurements, and present a sample shot where the inferred electron temperature varied from 167 ± 16 eV to 700 ± 85 eV over 1.6 cm.

47 OTHER INSTRUMENTATION↗

DOE OSTI2023

Electron bunch dynamics and emission in particle-in-cell simulations of relativistic laser–solid interactions: On density artifacts, collisions, and numerical dispersion

Sub-optical-cycle dynamics of dense electron bunches in relativistic-intensity laser–solid interactions lead to the emission of high-order harmonics and attosecond light pulses. The capacity of particle-in-cell simulations to accurately model these dynamics is essential for the prediction of emission properties because the attosecond pulse intensity depends on the electron density distribution at the time of emission and on the temporal distribution of individual electron Lorentz-factors in an emitting electron bunch. Here, we show that in one-dimensional collisionless simulations, the peak density of the emitting electron bunch increases with the increase in the spatial resolution of the simulation grid. When collisions are added to the model, the peak electron density becomes independent of the spatial resolution. Collisions are shown to increase the spread of the peaks of Lorentz-factors of emitting electrons in time, especially in the regimes far from optimum generation conditions, thus leading to lower intensities of attosecond pulses as compared to those obtained in collisionless simulations.

Physics↗

DOE OSTI2023

A cryogenically cooled 200 kV DC photoemission electron gun for ultralow emittance photocathodes

Novel photocathode materials like ordered surfaces of single crystal metals, epitaxially grown high quantum efficiency thin films, and topologically non-trivial materials with dirac cones show great promise for generating brighter electron beams for various accelerator and ultrafast electron scattering applications. Despite several materials being identified as brighter photocathodes, none of them have been tested in electron guns to extract electron beams due to technical and logistical challenges. In this paper, we present the design and commissioning of a cryocooled 200 kV DC electron gun that is capable of testing a wide variety of novel photocathode materials over a broad range of temperatures from 298 to 35 K for bright electron beam generation. This gun is designed to enable easy transfer of the photocathode to various standard ultra-high-vacuum surface diagnostics and preparation techniques, allowing a full characterization of the dependence of beam brightness on the photocathode material and surface properties. We demonstrate the development of such a high-voltage, high-gradient gun using materials and equipment that are easily available in any standard university lab, making the development of such 200 kV electron guns more accessible.

Instruments & Instrumentation↗

DOE OSTI2026

Fit-free optical determination of electronic thermalization time in nematic iron-based superconductors

We present a nematic response function model (NRFM) for fit-free direct extraction of the characteristic time of ultrafast electronic thermalization in iron-based superconductors, materials with electronic nematicity. By combining the NRFM for polarization-dependent pump–probe measurements of electronic nematic response with the two-temperature model (TTM) for sub-picosecond quasiparticle relaxation, we quantify the electronic thermalization timescales and their anisotropy. The nematic response function is modeled as the difference in normalized reflectivity signals, revealing a pronounced sub-picosecond extremum in signal evolution that directly yields the characteristic electronic thermalization time. This method demonstrates that the NRFM is consistent with TTM fits of transient optical response, yielding electronic thermalization time constants on the order of 110–230 fs for the FeSe 1−x Te x and Ba(Fe 0.92 Co 0.08 ) 2 As 2 thin films. Here, the proposed approach can be applied to any material that exhibits electronic nematicity, providing a powerful tool for direct mapping of the relaxation time in nematic materials, avoiding complex experimental data-fitting procedures.

Bartenev, Alexander [University of Puerto Rico, Ma↗

DOE OSTI2024

Secondary structure determines electron transport in peptides

Proteins play a key role in biological electron transport, but the structure–function relationships governing the electronic properties of peptides are not fully understood. Despite recent progress, understanding the link between peptide conformational flexibility, hierarchical structures, and electron transport pathways has been challenging. Here, we use single-molecule experiments, molecular dynamics (MD) simulations, nonequilibrium Green’s function-density functional theory (NEGF-DFT), and unsupervised machine learning to understand the role of secondary structure on electron transport in peptides. Our results reveal a two-state molecular conductance behavior for peptides across several different amino acid sequences. MD simulations and Gaussian mixture modeling are used to show that this two-state molecular conductance behavior arises due to the conformational flexibility of peptide backbones, with a high-conductance state arising due to a more defined secondary structure (beta turn or 3 10 helices) and a low-conductance state occurring for extended peptide structures. These results highlight the importance of helical conformations on electron transport in peptides. Conformer selection for the peptide structures is rationalized using principal component analysis of intramolecular hydrogen bonding distances along peptide backbones. Molecular conformations from MD simulations are used to model charge transport in NEGF-DFT calculations, and the results are in reasonable qualitative agreement with experiments. Projected density of states calculations and molecular orbital visualizations are further used to understand the role of amino acid side chains on transport. Overall, our results show that secondary structure plays a key role in electron transport in peptides, which provides broad avenues for understanding the electronic properties of proteins.

Science & Technology - Other Topics↗

DOE OSTI2024

The Electron Spectro-Microscopy (ESM) Beamline at NSLS-II

Photoelectron spectroscopy is a primary tool for the study of the electronic structure of materials and the chemical composition of surfaces. High-resolution angle-resolved photoemission spectroscopy (ARPES) has the unique ability to map the energy bands in momentum space. Furthermore, going beyond the single particle picture, the self-energy corrections caused by correlations in solids can be extracted from the analysis of the emission line shape. The current level of refinement, in terms of energy and angular resolution (ΔE < 1 meV, Δθ < 0.1°), makes the technique sensitive to the lowest energy excitations and the dynamics of electrons, which in turn virtually determine all the macroscopic properties of any system and govern the chemical, electrical, magnetic, and physical processes. Similarly important, X-ray photoelectron microscopy (XPEEM), combined with the low-energy electron microscopy (LEEM), is indispensable in probing the complexity of chemical, structural, electronic and magnetic properties of surfaces and shallow interfaces, with the spatial resolution of few tens of nanometer (nm). The Electron-Spectro-Microscopy beamline (ESM) has been recently commissioned at NSLS-II and is now in operation. The primary spectroscopic technique is photoemission, performed over a wide energy range with control of light polarization and in a variety of flux/resolution conditions. The beamline has two experimental end stations that allow to perform ARPES and XPEEM/LEEM, separately. The ARPES end station focuses on high energy-resolution work, with spot-size of a few microns. The XPEEM/LEEM end station is a full-field microscope (XPEEM) operating either with the synchrotron generated X-rays (XPEEM), or with an internal electron gun (LEEM). Spatial resolution is crucial in studies of newly synthesized complex materials since they are often initially available only as small specimens (typically micron size). Furthermore, chemical inhomogeneities on surfaces are often an integral part of surface chemical processes. Finally, the ESM beamline with X-ray spots of few microns is optimized to study the electronic structure of novel materials with microscopy capabilities.

47 OTHER INSTRUMENTATION↗

DOE OSTI2023

A superconfiguration calculation of opacity with consistent bound and continuum electron treatments using green’s functions

One of the challenges in calculating the opacity of dense plasmas is the difficulty in consistently modeling electrons bound to nuclei and those that exist within the continuum of free states in electronic structure models. We address this issue by adapting the green's function approach, originally developed for use in average atom calculations, to the determination of superconfiguration (SC) electronic structure. The spectra created using these SCs indicate that a consistent treatment of continuum electronic structure is important for phenomena involving electrons near ionization thresholds, such as the pressure ionization of bound states and the opacity due to transitions near bound-free edges. Though important for dense plasmas, the detailed incorporation of continuum electrons into structure calculations does not have significant impact on the recent discrepancies between the predicted and measured opacity of hot, dense iron (Bailey et al 2015 Nature517 56). Here we find that the inclusion of plasma effects through an ion-sphere model along with our treatment of continuum electronic states gives a description of pressure ionization in hot, dense aluminum that is in better agreement with experiment than methods that rely on perturbative descriptions of the plasma environment (Hoarty et al 2013 Phys. Rev. Lett.110 265003).

74 ATOMIC AND MOLECULAR PHYSICS↗

DOE OSTI2024

Flow-shear destabilization of multiscale electron turbulence

The impact of sheared ${\mathbf{E} \hskip -1pt \times \hskip -1pt \mathbf{B}}$ flow on multiscale turbulence is studied with nonlinear gyrokinetic simulations. Simulations are based on DIII-D-like, high-confinement mode (H-mode) pedestal parameters in the regime of low ion temperature gradient drive, where there is a broad spectrum of electron temperature gradient (ETG)-driven turbulence. It is found that ${\mathbf{E} \hskip -1pt \times \hskip -1pt \mathbf{B}}$ shear can have a significant effect on ETG-driven electron transport, with an unexpected transition from a turbulence stabilization regime at moderate to large shearing rates $γ_E$ to a novel turbulence destabilization regime at low levels of $γ_E$. In the turbulence stabilization regime, the electron energy flux decreases monotonically with $γ_E$, even when $γ_E$ is small compared to electron mode growth rates. The stabilizing effect comes dominantly from the electron, not ion, gyrokinetic equation. In the novel destabilization regime, reduction of zonal energy results from the interaction of $γ_E$-modulated nonlinear drive in the zonal ion gyrokinetic equation, increasing the electron transport over a broad range of shearing rates. Finally, neither of these effects has been observed in previous electron-scale simulations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2022

Electron cyclotron drift instability and anomalous transport: two-fluid moment theory and modeling

In the presence of a strong electric field perpendicular to the magnetic field, the electron cross-field (E × B) flow relative to the unmagnetized ions can cause the so-called electron cyclotron drift instability (ECDI) due to resonances of the ion acoustic mode and the electron cyclotron harmonics. This occurs in, for example, collisionless shock ramps in space, and in E × B discharge devices such as Hall thrusters. A prominent feature of ECDI is its capability to induce an electron flow parallel to the background >E field at a speed greatly exceeding predictions by classical collision theory. Such anomalous transport is important due to its role in particle thermalization at space shocks, and in causing plasma flows towards the walls of E × B devices, leading to unfavorable erosion and performance degradation, etc. The development of ECDI and anomalous transport is often considered requiring a fully kinetic treatment. In this work, however, we demonstrate that a reduced variant of this instability, and more importantly, the associated anomalous transport, can be treated self-consistently in a collisionless two-fluid framework without any adjustable collision parameter. By treating both electron and ion species on an equal footing, the free energy due to the inter-species velocity shear allows the growth of an anomalous electron flow parallel to the background E field. We will first present linear analyses of the instability in the two-fluid five- and ten-moment models, and compare them against the fully-kinetic theory. At low temperatures, the two-fluid models predict the fastest-growing mode in good agreement with the kinetic result. Also, by including more (> = 10) moments, secondary (and possibly higher) unstable branches can be recovered. The dependence of the instability on ion-to-electron mass ratio, plasma temperature, and background B field strength is also thoroughly explored. We then carry out direct numerical simulations of the cross-field setup using the five-moment model. The development of the instability, as well as the anomalous transport, is confirmed and in excellent agreement with theoretical predictions. The force balance properties are also studied using the five-moment simulation data. Here this work casts new insights into the nature of ECDI and the associated anomalous transport and demonstrates the potential of the two-fluid moment model in efficient modeling of E × B plasmas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2021

Heat pulse propagation and anomalous electron heat transport measurements on the optimized stellarator W7-X

The optimized stellarator Wendelstein 7-X (W7-X) is designed to have an approximately quasi-isodynamic magnetic configuration with reduced neoclassical transport in comparison to a classical stellarator, and turbulent transport is expected to be a significant source of anomalous heat transport across the plasma minor radius. The ion temperature gradient driven mode and the trapped electron mode (TEM) are thought to be responsible for the ion-scale turbulence in W7-X plasmas with volume averaged pressure below 1%. In this work, the electron temperature gradient driven turbulence is shown to be a good candidate for the explanation of the observed electron heat flux, in the inner plasma region where the density gradient is weak (in the outer region, a relatively stronger density gradient would drive additional TEM turbulence). Further, the experimental electron heat transport measured during electron cyclotron resonant heating power and plasma density scans is compared to neoclassical predictions, and the stiffness in the electron heat transport measured during transient transport experiments is presented in three common magnetic configurations of W7-X. In low-(β) plasma discharges, the stiffness in the electron heat flux, quantified by the ratio of the heat pulse to power balance diffusivity, ${\chi }_{\mathrm{e}}^{\mathrm{H}\mathrm{P}}/{\chi }_{\mathrm{e}}^{\mathrm{P}\mathrm{B}}$, is measured to be less than 2, and trend downwards with increasing collisionality.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2021

The role of ion and electron-scale turbulence in setting heat and particle transport in the DIII-D ITER baseline scenario

In this work, the heat and particle transport in a DIII-D ITER Baseline Scenario (IBS) discharge has been investigated using both linear and nonlinear gyrokinetic simulations performed with the CGYRO code [J. Candy et al: Journal Comp. Phys. (2016)].These simulations were used to investigate the role that ion-scale ($k_θp_s$ < 1:0) and electron-scale ($k_θp_s$ > 1:0) turbulence play in determining heat and particle transport in the core of conditions believed to directly extrapolate to ITER operation. This investigation spans over nearly half of the plasma minor radius, from ρ = 0:45 - 0:85. To probe the nature of the transport and turbulence in these conditions and to validate the model against experimental fluxes, scans of $a/L_{T_i}$, $a/L_{T_e}$, and $a/L_n$ were performed at all radial locations. Long wavelength turbulence is found to be dominated by ITG modes with strong non-adiabatic electron effects and appears unable to reproduce ion and electron heat fluxes and electron particle fluxes simultaneously at most radial positions when single parameter scans are performed. To investigate the potential role of short wavelength turbulence, a series of electron-scale simulations are performed that indicate that experimentally relevant levels of electron heat flux could arise at sub-ion scales. Quantitative comparison of the simulated fluxes obtained from ion and electron-scale simulations with experimental levels along with the sensitivity of simulations results to changes in inputs is presented. Through extensive sensitivity scans and comparison with multiple transport channels, this work demonstrates a clear need for self-consistent modification of multiple inputs and suggests multi-scale interactions play a significant role at many of the radial locations studied. The results of this analysis help shape our understanding of the model fidelity needed to predict turbulence and transport reactor-relevant conditions and have important implications for the prediction of future fusion devices.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2022

Open Hardware in Science: The Benefits of Open Electronics

Abstract Openly shared low-cost electronic hardware applications, known as open electronics, have sparked a new open-source movement, with much untapped potential to advance scientific research. Initially designed to appeal to electronic hobbyists, open electronics have formed a global “maker” community and are increasingly used in science and industry. In this perspective article, we review the current costs and benefits of open electronics for use in scientific research ranging from the experimental to the theoretical sciences. We discuss how user-made electronic applications can help (I) individual researchers, by increasing the customization, efficiency, and scalability of experiments, while improving data quantity and quality; (II) scientific institutions, by improving access to customizable high-end technologies, sustainability, visibility, and interdisciplinary collaboration potential; and (III) the scientific community, by improving transparency and reproducibility, helping decouple research capacity from funding, increasing innovation, and improving collaboration potential among researchers and the public. We further discuss how current barriers like poor awareness, knowledge access, and time investments can be resolved by increased documentation and collaboration, and provide guidelines for academics to enter this emerging field. We highlight that open electronics are a promising and powerful tool to help scientific research to become more innovative and reproducible and offer a key practical solution to improve democratic access to science.

Oellermann, Michael (ORCID:0000000153926737)↗

DOE OSTI2026

Electron-irradiation induced creep in amorphous alloys

Electron-irradiation induced creep rates in amorphous alloys, a-SiO2, Fe79B16Si5, Cu60Ta40, and Cu50Ti50, were measured at room temperature using a miniaturized beam-bending apparatus within a transmission electron microscope operated at 200 keV. The creep rates of these amorphous samples increased nearly linearly with both e-beam current density and applied stress, while a reference crystalline (c-)SiO2 sample failed to creep under the same conditions. The irradiation induced creep compliance of a-SiO2 was ~ 15 times larger than that of Fe79B16Si5 and over 1,000 times larger than that of the two Cu alloys. Molecular dynamics computer simulations were employed to simulate electron irradiation induced creep using interatomic potentials representing amorphous Cu75Zr25, Ni80P20, and SiO2 as model systems. The irradiation induced creep compliances calculated for Cu75Zr25 during 200 keV electron irradiation provided good quantitative agreement with the two Cu-based alloys, but that for a-SiO2 was ~ 180 times too small. These results indicate that unlike neutron or ion-beam induced creep in a-SiO2, creep under electron irradiation is dominated by the effects of ionization owing largely to the far higher ratio of electronic stopping to nuclear stopping for electrons than for ions.

36 MATERIALS SCIENCE↗

DOE OSTI2020

Halo removal experiments with hollow electron lens in the BNL Relativistic Heavy Ion Collider

A hollow electron beam has been proposed as an active control tool to remove the beam halo from high-energy, high-current hadron or ion machines (such as the High-Luminosity Large Hadron Collider). To study the halo removal rate and assess the effect on the ion beam core, one of the two electron lenses in the Relativistic Heavy Ion Collider was changed from a Gaussian beam profile to a hollow profile. We describe the design and verification of the hollow electron beam parameters as well as the methods to minimize the hollow beam profile distortions, which can result in an ion beam emittance increase. The hollow beam alignment with the ion beam by using a backscattered electron detector has been demonstrated. Furthermore, experiments were carried out to explore the efficiency of the halo removal by scanning the current and inner radius of the hollow electron beam, which is pulsed either every turn or every nth turn. The effects of the hollow electron beam on the ion beam emittance and luminosity were also assessed experimentally by scanning the inner radius of the electron beam.

43 PARTICLE ACCELERATORS↗