Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “electronic transformers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44

Characteristics of martensite transformed from deformed austenite with various states of ultrahigh strength 300 M steel

Highlights: • Fractions of lath martensite and its packets decrease with the increasing of strain. • Length and width of blocks of lath martensite decrease with an increase in strain. • Severe work-hardening and completed DRX hamper transformation of lath martensite. • As for austenite with the state of work-hardening, the lath width changes little. • As for austenite with the state of DRX and subsequent growth, the lath width changes. - Abstract: 300 M steel was isothermally compressed on a Gleeble 1500 simulator at a deformation temperature of 1173 K, a strain rate of 0.1 s{sup −1} and strains ranging from 0.11 to 1.20. The morphologies and structure characteristics of martensite transformed from deformed austenite during water quenching were observed and analysed via scanning electron microscope and transmission electron microscope. Subsequently, effects of prior austenite state on martensitic transformation behavior of 300 M steel were analysed. The experimental results showed that predominant lath martensite and complemental twinned martensite and retained austenite coexisted in deformation-quenched 300 M steel at various strains. The volume fraction of lath martensite and packets of lath martensite decreased with the increasing of strain, and the length and width of the blocks in lath martensite concurrently decreased. Prior austenite with the state of severely work-hardening or just completed dynamic recrystallization would hamper the nucleation and subsequent growth of lath martensite. Additionally, as for austenite with the state of work-hardening, the morphologies and width of laths changed little with the increasing of strain, whereas dislocations in the interior of laths dramatically increased. However, as for austenite with the state of dynamic recrystallization and subsequent growth, the width of laths obviously increased with the increasing of austenite grain size.

36 MATERIALS SCIENCE↗

Electrochemical behavior of potentiodynamically deposited cobalt oxyhydroxide (CoOOH) thin films for supercapacitor application

Graphical abstract: Scanning electron micrograph (SEM) images of cobalt oxyhydroxide thin film at (a) 2000 Multiplication-Sign and (b) 10,000 Multiplication-Sign magnifications. Highlights: Black-Right-Pointing-Pointer Simple method for the synthesis of CoOOH thin films. Black-Right-Pointing-Pointer Supercapacitor with maximum specific capacitance of 449 F g{sup -1}. Black-Right-Pointing-Pointer High charge/discharge efficiency. -- Abstract: In the present study, we report, for the first time, the synthesis of cobalt oxyhydroxide thin films on inexpensive stainless steel substrate using potentiodynamic electrodeposition method. These films were characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR) and scanning electron microscopy (SEM) techniques. The orthorhombic crystal structure was revealed by the X-ray diffraction study. The FT-IR spectrum confirmed the formation of cobalt oxyhydroxide. The SEM studies showed the nanoflakes-like morphology with an average thickness of 100 nm. The cyclic voltammetry study of the cobalt oxyhydroxide films in 1 M KOH showed maximum specific capacitance of 449 F g{sup -1} at scan rate of 5 mV s{sup -1}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Polyvinyl Alcohol (PVA)–Azadirachta indica (Neem) Nanofibrous Mat for Biomedical Application: Formation and Characterization

The present study provides credence to the formation of polyvinyl alcohol (PVA)–Azadirachta indica (neem) nanofibrous mat (PNNM) under optimum processing conditions of electrospinning technique from a mixer of PVA and neem extract to utilize the inherent medicinal properties of this herb for biomedical application. The bonding behavior, orientation of fibers, thermal behavior, and moisture management properties were evaluated by Fourier transforms infrared spectroscopy (FTIR), scanning electron microscopy (SEM), thermo gravimetric analysis (TGA) and moisture management tester (MMT) reports respectively. The antibacterial activity of the developed sample at the maximum mixing ratio of neem extract (80%) was tested against Gram-positive (S. aureus) bacteria using agar disc diffusion method. The results reveal that the prepared nanofibrous mat exhibited better thermal and moisture management properties in comparison with PVA nanofiber alone. The formation of smooth fibers was confirmed by SEM images having average diameter of 185 nm under 5k, 10k and 15k magnifications. The characteristic peaks of PVA and neem constituents in FTIR spectra of the developed mat confirmed the presence of both components. Bacterial resistance was reached up to 20 mm due to the antibacterial constituents of neem extract. Thus the developed mat could be used as a biocompatible and bio based in biomedical applications. Graphic Abstract: .

36 MATERIALS SCIENCE↗

Automated TEM Reveals Intercrystalline Correlations of Conjugated Polymers

Transmission electron microscopy (TEM) continues to transform polymer science by revealing key aspects of chain packing, phase separation and nanoscale structure. The development of instrumentation and data analyses tools is driving the field forward and enabling new experiments. Here, we use automated high-resolution TEM (HRTEM) and image processing to identify the structure of a conjugated polymer used in organic electronics. Analysis of more than 600 HRTEM images reveals lattice parameters and orientation correlations between crystals, including the preferred alignment of neighboring crystals along the same crystallographic direction that is likely the result of liquid crystalline order.

Fair, Ryan A. [Pennsylvania State University, Univ↗

Devitrification kinetics and phase selection mechanisms in Cu-Zr metallic glasses

Metallic glasses have been a promising class of materials since their discovery in the 1960s. Indeed, remarkable chemical, mechanical and physical properties have attracted considerable attention, and several excellent reviews are available. Moreover, the special group of glass forming alloys known as the bulk metallic glasses (BMG) become amorphous solids even at relatively low cooling rates, allowing them to be cast in large cross sections, opening the scope of potential applications to include bulk forms and net shape structural applications. Recent studies have been reported for new bulk metallic glasses produced with lower cooling rates, from 0.1 to several hundred K/s. Some of the application products of BMGs include sporting goods, high performance springs and medical devices. Several rapid solidification techniques, including melt-spinning, atomization and surface melting have been developed to produce amorphous alloys. The aim of all these methods is to solidify the liquid phase rapidly enough to suppress the nucleation and growth of crystalline phases. Furthermore, the production of amorphous/crystalline composite (ACC) materials by partial crystallization of amorphous precursor has recently given rise to materials that provide better mechanical and magnetic properties than the monolithic amorphous or crystalline alloys. In addition, these advances illustrate the broad untapped potential of using the glassy state as an intermediate stage in the processing of new materials and nanostructures. These advances underlie the necessity of investigations on prediction and control of phase stability and microstructural dynamics during both solidification and devitrification processes. This research presented in this dissertation is mainly focused on Cu-Zr and Cu-Zr-Al alloy systems. The Cu-Zr binary system has high glass forming ability in a wide compositional range (35-70 at.% Cu). Thereby, Cu-Zr based alloys have attracted much attention according to fundamental research on the behaviors of glass forming alloys. Further motivation arising from the application of this system as a basis for many BMGs and ACC materials; the Cu-Zr system warrants this attention and offers great potential for the development of new materials. However, the prediction and control of microstructural evolution during devitrification remains challenging because of the complex devitrification behavior of the Cu-Zr binary alloy which is arising from the competition of metastable and stable phases and diversity of crystal structures. This dissertation details a systematic fundamental investigation into the mechanisms and kinetics of the various crystallization transformation processes involved in the overall devitrification response of Cu-Zr and Cu-Zr-Al glasses. Various isothermal and nonisothermal treatments are employed, and the structural response is characterized using bulk X-ray and thermal analysis methods as well as nanoscale microscopic analysis methods, revealing structural and chemical details down to the atomic-scale. By carefully combining techniques such as differential scanning calorimetry (DSC), in-situ synchrotron high energy X-ray diffraction (HEXRD), and transmission electron microscopy (TEM) to quantify the characterization transformations, this research has uncovered numerous details concerning the atomistic mechanisms of crystallization and has provided much new understanding related to the dominant phases, the overall reaction sequences, and the rate-controlling mechanisms. As such this work represents a substantial step forward in understanding these transformations and provides a clear framework for further progress toward ultimate application of controlled devitrification processing for the production of new materials with remarkable properties.

36 MATERIALS SCIENCE↗

Novel Biocide Based on Cationic Derivative of Psyllium: Surface Modification and Antibacterial Activity

To circumvent the problems (such as volatilization, photolytic decomposition, chemical instability, easy permeability through the skin) associated with low molecular weight antimicrobial agents, our strategy employed graft copolymerization of cationic monomer with the polymeric substrate viz. psyllium husk. The surface graft concentration of quaternary ammonium ion on psyllium was optimized by measuring the extent of grafting in the microwave-induced process. The surface modification of graft copolymers was evident by different physico–chemical techniques like {sup 13}C nuclear magnetic resonance (NMR), Fourier-transform infrared spectroscopy (FTIR), scanning electron microscope (SEM), X-ray diffractometer (XRD), differential scanning calorimetry (DSC), Thermo gravimeteric analysis (TGA), and viscometric study. The synthesized water soluble product resulted good antibacterial activity against Gram positive Staphylococcus aureus and Bacillus anthracis but failed to produce any antibacterial activity against Gram negative Salmonella typhi and Escherichia coli. The reason to failure has been explained on the basis of differences in the electrokinetic property between Gram-positive and Gram-negative bacteria. Optimum minimum inhibitory concentration (MIC) for the polymeric grade which showed good biocidal effect evaluated by both zone of inhibition and absorbance is found at 1000 µg/ml.

36 MATERIALS SCIENCE↗

Degradation of Adenine on the Martian Surface in the Presence of Perchlorates and Ionizing Radiation: A Reflectron Time-of-flight Mass Spectrometric Study

The aim of the present work is to unravel the radiolytic decomposition of adenine (C{sub 5}H{sub 5}N{sub 5}) under conditions relevant to the Martian surface. Being the fundamental building block of (deoxy)ribonucleic acids, the possibility of survival of this biomolecule on the Martian surface is of primary importance to the astrobiology community. Here, neat adenine and adenine–magnesium perchlorate mixtures were prepared and irradiated with energetic electrons that simulate the secondary electrons originating from the interaction of the galactic cosmic rays with the Martian surface. Perchlorates were added to the samples since they are abundant—and therefore relevant oxidizers on the surface of Mars—and they have been previously shown to facilitate the radiolysis of organics such as glycine. The degradation of the samples were monitored in situ via Fourier transformation infrared spectroscopy and the electron ionization quadruple mass spectrometric method; temperature-programmed desorption profiles were then collected by means of the state-of-the-art single photon photoionization reflectron time-of-flight mass spectrometry (PI-ReTOF-MS), allowing for the detection of the species subliming from the sample. The results showed that perchlorates do increase the destruction rate of adenine by opening alternative reaction channels, including the concurrent radiolysis/oxidation of the sample. This new pathway provides a plethora of different radiolysis products that were identified for the first time. These are carbon dioxide (CO{sub 2}), isocyanic acid (HNCO), isocyanate (OCN{sup −}), carbon monoxide (CO), and nitrogen monoxide (NO); an oxidation product containing carbonyl groups (R{sub 1}R{sub 2}–C=O) with a constrained five-membered cyclic structure could also be observed. Cyanamide (H{sub 2}N–C≡N) was detected in both irradiated samples as well.

79 ASTRONOMY AND ASTROPHYSICS↗

A novel process for separation of polycarbonate, polyvinyl chloride and polymethyl methacrylate waste plastics by froth flotation

Highlights: • KMnO{sub 4} treatment changes selectively flotation behavior of PC, PVC and PMMA plastics. • Ternary waste plastics are separated efficiently by froth flotation. • Recycling of KMnO{sub 4} solutions is conducted to make the process green. • A novel process is proposed for separation of waste plastics by froth flotation. - Abstract: A novel process was proposed for separation of ternary waste plastics by froth flotation. Pretreatment of plastics with potassium permanganate (KMnO{sub 4}) solution was conducted to aid flotation separation of polycarbonate (PC), polyvinyl chloride (PVC) and polymethyl methacrylate (PMMA) plastics. The effect of pretreatment parameters including KMnO{sub 4} concentration, treatment time, temperature and stirring rate on flotation recovery were investigated by single factor experiments. Surface treatment with KMnO{sub 4} changes selectively the flotation behavior of PC, PVC and PMMA, enabling separation of the plastics by froth flotation. Mechanism of surface treatment was studied by Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM) and X-ray photoelectron spectrum (XPS). Effect of frother concentration and flotation time on flotation behavior of plastic mixtures was further studied for flotation separation. The optimized conditions for separation of PC are KMnO{sub 4} concentration 2 mmol L{sup −1}, treatment time 10 min, temperature 60 °C, stirring rate 300 rpm, flotation time 1 min and frother concentration 17.5 mg L{sup −1}. Under optimum conditions, PVC and PMMA mixtures are also separated efficiently by froth flotation associated with KMnO{sub 4} treatment. The purity of PC, PVC and PMMA is up to 100%, 98.41% and 98.68%, while the recovery reaches 96.82%, 98.71% and 98.38%, respectively. Economic analysis manifests remarkable profits of the developed process. Reusing KMnO{sub 4} solution is feasible, enabling the process greener.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Water-dispersible and quasi-superparamagnetic magnetite nanoparticles prepared in a weakly basic solution at the low synthetic temperature

Highlights: • Magnetite nanoparticles were prepared in a weakly basic solution at the low reaction temperature. • The double layer may be steadily formed on the surfaces of magnetite nanoparticles at the high pH value. • Magnetite nanoparticles present a quasi-superparamagnetic property and a good dispersion in the aqueous solution. - Abstract: Magnetite nanoparticles were prepared in a weakly basic solution at the low reaction temperature by the co-precipitation method. As a comparison, the oxidative precipitation method was also applied in this study. The structure, morphology, and other properties of the obtained samples were characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), scanning electron microscope (SEM), transmission electron microscope (TEM), and thermogravimetric analysis (TGA). The above characterization data indicate that small size and narrow size distribution are found for magnetite nanoparticles prepared by the co-precipitation method. Further magnetic property and Zeta potential results illuminate that magnetite nanoparticles prepared by this method display a quasi-superparamagnetic property and a good dispersion in the aqueous solution. Based on the investigation results, the magnetite nanoparticles with a quasi-superparamagnetic property and a fine dispersion can be facilely prepared in a weakly basic solution at the low reaction temperature by the co-precipitation method.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Development of Novel Biodegradable Enrofloxacin–Silica Composite for In Vitro Drug Release Kinetic Studies

A sustained drug delivery system is developed by using nonionic polymer to formulate drug release rate from silica capsules. To serve this purpose, silica capsules filled with poly(ethylene glycol) (PEG) were incorporated with a veterinary antibiotic drug enrofloxacin (ENF); as a model hydrophobic drug by using a general and facile sol–gel route. The physicochemical properties of the prepared drug-loaded composites were investigated by scanning electron microscope (SEM), nitrogen adsorption, Fourier transform infrared spectroscopy and thermal analysis (TGA). The impact of the media’s ionic strength on the drug release was evaluated over a range of 0–0.4 M to simulate the gastrointestinal feed in two physiological pH conditions. Sodium chloride was applied for ionic concentration adjustment due to its ability to salt out polymers in the midrange of the lyotropic series. Simultaneously, the drug release kinetics was evaluated by fitting experimental data to common empirical (zero-order, first order and Higuchi) and semi-empirical (Ritger–Peppas and Sahlin–Peppas) models. The drug release kinetics from capsules revealed a non-Fickian diffusion and pure relaxation-controlled release. Of these models, Sahlin–Peppas equation best fit the release data of ENF. To determine the best model, non-linear regressions were carried out.

36 MATERIALS SCIENCE↗

Thermal and mechanical properties of palm oil-based polyurethane acrylate/clay nanocomposites prepared by in-situ intercalative method and electron beam radiation

Palm oil based-polyurethane acrylate (POBUA)/clay nanocomposites were prepared via in-situ intercalative polymerization using epoxidized palm oil acrylate (EPOLA) and 4,4' methylene diphenyl diisocyante (MDI). Organically modified Montmorillonite (ODA-MMT) was incorporated in EPOLA (1, 3 and 5%wt), and then subjected to polycondensation reaction with MDI. Nanocomposites solid films were obtained successfully by electron beam radiation induced free radical polymerization (curing). FTIR results reveal that the prepolymer was obtained successfully, with nanoclay dispersed in the matrix. The intercalation of the clay in the polymer matrix was investigated by XRD and the interlayer spacing of clay was found to be increased up to 37 Å, while the structure morphology of the nanocomposites was investigated by TEM and SEM. The nanocomposites were found to be a mixture of exfoliated and intercalated morphologies. The thermal stability of the nanocomposites was significantly increased by incorporation of nanoclay into the polymer matrix. DSC results reveal that the Tg was shifted to higher values, gradually with increasing the amount of filler in the nanocomposites. Tensile strength and Young's modulus of the nanocomposites showed remarkable improvement compared to the neat POBUA.

36 MATERIALS SCIENCE↗

High Penetration Power Electronics Grid: Modeling and Simulation Gap Analysis

Increased penetration of power electronics in the grid is happening through development of high-power drives (like in Type 3 or 4 wind turbines, industrial drives, etc.), high-voltage direct current (HVdc) systems, flexible alternating current transmission systems (FACTS), energy storage systems (ESSs), inverter-based renewables like solar and wind, electric vehicle chargers, and other technologies. Ongoing research and development in new power electronic technologies including, but not limited to, solid-state power substations (SSPS), extreme fast charging (XFC), solid-state transformers, and multi-port power electronics that integrate multiple sources/loads will further increase penetration levels. To ensure stakeholders can integrate high penetration of power electronic technologies safely and reliably requires tools and methods to assess and evaluate their impact on the grid. Objectives: This report surveys, assesses, and analyzes commercially available and open-source tools that can support the assessment and evaluation of power electronics in future grids with high penetration levels. The study includes aspects that range from power flow analysis to dynamics evaluation (including hardware-in-the-loop – HIL testing) for such systems. The challenges and gaps associated with the current generation of toolsets available to assess the technical impact of introducing high penetration of power electronics are reported. The method is summarized in Figure ES-1.

24 POWER TRANSMISSION AND DISTRIBUTION↗

A simple route to the synthesis of BaCrO{sub 4} microstructures at room temperature

BaCrO{sub 4} with various morphologies such as X-shaped, shuttle, rhombus was produced by using poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) (P123) as a structure-directing agent at room temperature. The effects of experimental parameters on the morphology of BaCrO{sub 4} were investigated. This synthetic route was also extended to the synthesis of BaWO{sub 4} and Pb{sub 2}CrO{sub 5}. The samples were characterized by X-ray powder diffraction (XRD), scanning electron microscopy (SEM), and Fourier transform-infrared spectroscopy (FT-IR). The photoluminescence (PL) of the sample was investigated.

36 MATERIALS SCIENCE↗

Ultrafast studies of elusive chemical reactions in the gas phase

The chemical composition of the interstellar medium and planetary atmospheres is constantly in flux as atoms and molecules collide and interact with high-energy particles such as electrons, protons, and photons. These transformative processes ultimately lead to the coalescence of molecules and eventually the birth of stars. Our understanding of these chemical ecosystems relies on models that synthesize data from gas-phase experiments, providing insights into reaction cross sections. This Review examines efforts to delve into the fundamental bond-forming and bond-breaking dynamics that occur during bimolecular and electron-initiated reactions. Furthermore, these experiments involve clever approaches to establish a time reference and the collision geometry necessary for tracking atomic motion with femtosecond time resolution. Findings from these efforts enhance present models and improve predictions for molecule-molecule and electron-molecule collisions.

74 ATOMIC AND MOLECULAR PHYSICS↗

Adsorption of Zn(II) and Pb(II) Ions from Aqueous Solution Using Chitosan Cross-Linked Formaldehyde Adsorbent to Protect the Environment

Synthesis of chitosan cross-linked formaldehyde was successfully prepared from shrimp chitosan. Characterization of the adsorbent using functional properties such as Fourier transform infrared spectroscopy and scanning electron microscope shows the present of amide and hydroxyl groups at their respective position, also the morphological structure of the adsorbent. Adsorption study of the above adsorbent was carry out for the removal of Zn(II) and Pb(II) from aqueous solution. The effect of cross-linked chitosan dosage, initial concentration, contact time, temperature and pH of the solution for the removal of Zn(II) and Pb(II) were discussed. The optimum dosage required for the removal of Zn(II) and Pb(II) were found to be at 0.4 g at the maximum temperature of 25 °C and the percentage removal were 20.34 and 13.54% respectively. The time required for equilibrium to be reached was 50 min. Effectiveness of the cross-linked adsorbent was observed to increase by increase in contact time. Further studies were also done on isotherms and kinetics of Zn(II) and Pb(II) removal from aqueous solution using chitosan cross-linked formaldehyde. Adsorption Isotherm study conducted from the cross-linked absorbent, shows that the Langmuir plot for the removal of Zn(II) was best fitted with R{sup 2} value of 0.9934, and the adsorption process follows the pseudo second order kinetics with an R{sup 2} value of 0.996. This adsorption process was established to be reversible with an R{sub L} values of zinc (0.8232) and lead (0.8853) respectively. Therefore this implies a successfully reduction in the adsorption of zinc and lead ions from cross-linked formaldehyde solution to protect our environment.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Visualizing Materials Chemistry at Atomic Resolution

Analytical electron microscopy—empowered by advances in electron optics and detectors—is poised to radically transform the understanding of the complex phenomena arising from atomic and electronic structure in materials chemistry. In their Feature article, Sergio I. Sanchez, Matthew W. Small, Shankar Sivaramakrishnan, Jianguo Wen, Jian-Min Zuo, and Ralph G. Nuzzo of the University of Illinois Urbana-Champaign discuss these recent advances in depth. The cover shows a rendering of an electron beam probing the atomic structure of a metal nanoparticle. In the background is an STEM image of an Au nanoparticle illustrating the capacities of state-of-the-art electron microscopy as a characterization tool in materials chemistry. Furthermore, the cover art is courtesy of Alex Jerez of the Imaging Technology Group at the Beckman Institute, University of Illinois Urbana-Champaign.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Retaining Geochemical Signatures during Aragonite-Calcite Transformation at Hydrothermal Conditions

Transformation of aragonite, a mineral phase metastable at Earth’s surface, to calcite widely occurs in both sedimentary and metamorphic systems with the presence of an aqueous phase. The transformation process can affect geochemical signatures of aragonite (a protolith). This study focused on quantification of the retention of Mg/Ca and Sr/Ca ratios, and δ18O during the transformation process as well as evaluation of the transformation rate. To investigate the effect of transformation from aragonite to calcite on elemental and stable isotope ratios, we conducted a series of experiments in NaCl solutions at temperatures between 120 and 184 °C. Two additional experiments at 250 °C were conducted to estimate the transformation rate of aragonite to calcite. Protolith materials consist of (1) synthetic (Mg; Sr-bearing or non-Mg; Sr bearing) needle-shaped microcrystals of aragonite (<5 µm in size) and (2) larger chips (>100 µm in size) of natural aragonite. X-ray diffraction (XRD) showed that microcrystals successfully transformed to calcite within 30 h and scanning electron microscopy (SEM) yielded a change in the crystal size to >10 µm in rhombohedral shape. Electron backscatter diffraction (EBSD) of the larger aragonite chips showed that transformation to randomly oriented calcite occurred at the rims and along the cracks while the core retained an aragonite crystal structure. Isotope-ratio mass spectrometry (IRMS) analyses showed that calcite δ18O was controlled by temperature and δ18O of the solution. The obtained calibration curve of isotope fractionation factor versus temperature is consistent with other studies. Inductively coupled plasma optical emission spectroscopy (ICP-OES) analyses showed that calcite partially or completely retained Mg/Ca and Sr/Ca ratios through the transformation.

58 GEOSCIENCES↗