Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “electronic structure methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Using isotope shift for testing nuclear theory: The case of nobelium isotopes

We calculate field isotope shifts for nobelium atoms using nuclear charge distributions which come from different nuclear models.We demonstrate that comparing calculated isotope shifts with experiment can serve as a testing ground for nuclear theories. It also provides a way of extracting parameters of nuclear charge distribution beyond nuclear root mean square (rms) radius, e.g., parameter of quadrupole deformation β. The measurements of at least two atomic transitions is needed to disentangle the contributions of the changes in deformation and nuclear rms radius into field isotopic shift. We argue that a previous interpretation of the isotope measurements in terms of δ < r 2 > between 252,254 No isotopes should be amended when nuclear deformation is taken into account. As a result, we calculate isotope shifts for other known isotopes and for hypothetically metastable isotope 286 No for which the predictions of nuclear models differ substantially.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2020

Lone Pair Rotational Dynamics in Solids

Traditional classifications of crystalline phases focus on nuclear degrees of freedom. Through examination of both electronic and nuclear structure, we introduce the concept of an electronic plastic crystal. Such a material is classified by crystalline nuclear structure, while localized electronic degrees of freedom — here lone pairs — exhibit orientational motion at finite temperatures. This orientational motion is an emergent phenomenon arising from the coupling between electronic structure and polarization fluctuations generated by collective motions, such as phonons. Using ab initio molecular dynamics simulations, we predict the existence of electronic plastic crystal motion in halogen crystals and halide perovskites, and suggest that such motion may be found in a broad range of solids with lone pair electrons. Finally, such fluctuations in the charge density should be observable, in principle via synchrotron scattering.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Ultrabright Electron Bunch Injection in a Plasma Wakefield Driven by a Superluminal Flying Focus Electron Beam

Here, we propose a new method for self-injection of high-quality electron bunches in the plasma wakefield structure in the blowout regime utilizing a “flying focus” produced by a drive beam with an energy chirp. In a flying focus the speed of the density centroid of the drive bunch can be superluminal or subluminal by utilizing the chromatic dependence of the focusing optics. We first derive the focal velocity and the characteristic length of the focal spot in terms of the focal length and an energy chirp. We then demonstrate using multidimensional particle-in-cell simulations that a wake driven by a superluminally propagating flying focus of an electron beam can generate GeV-level electron bunches with ultralow normalized slice emittance (~30 nm rad), high current (~17 kA), low slice energy spread (~0.1%), and therefore high normalized brightness (> 10 19 A/ m 2 /rad 2 ) in a plasma of density ~10 19 cm –3 . The injection process is highly controllable and tunable by changing the focal velocity and shaping the drive beam current. Nearterm experiments at FACET II where the capabilities to generate tens of kA, < 10 fs drivers are planned, could potentially produce beams with brightness near 10 20 A / m 2 / rad 2 .

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Spin disorder in a stacking polytype of a layered magnet

Strongly correlated ground states and exotic quasiparticle excitations in low-dimensional systems are central research topics in the solid-state research community. The present work develops a layered material and explores the physical properties. Single crystals of 3⁢R–Na 2 ⁢MnTe⁢O 6 were synthesized via a flux method. Single-crystal x-ray diffraction and transmission electron microscopy reveal a crystal structure with ABC-type stacking and an R–3 space group, which establishes this material as a stacking polytype to previously reported 2⁢H–Na 2 ⁢MnTe⁢O 6 . Magnetic- and heat-capacity measurements demonstrate dominant antiferromagnetic interactions, the absence of long-range magnetic order down to 0.5 K, and field-dependent short-range magnetic correlations. A structural transition at ~23 K observed in dielectric measurements may be related to displacements of the Na positions. In conclusion, our results demonstrate that 3⁢R–Na 2 ⁢MnTe⁢O 6 displays low-dimensional magnetism, disordered structure and spins, and the system displays a rich structure variety.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Neuralized fermionic tensor networks for quantum many-body systems

In this work, we describe a class of neuralized fermionic tensor network states (NN-fTNSs) that introduce nonlinearity into fermionic tensor networks through configuration-dependent neural network transformations of the local tensors. The construction uses the fTNS algebra to implement a natural fermionic sign structure and is compatible with standard tensor network algorithms but gains enhanced expressivity through the neural network parametrization. Using the 1D and 2D Fermi-Hubbard models as benchmarks, we demonstrate that NN-fTNSs achieve order of magnitude improvements in the ground-state energy compared to pure fTNSs with the same bond dimension and can be systematically improved through both the tensor network bond dimension and the neural network parametrization. Compared to existing fermionic neural quantum states based on Slater determinants and Pfaffians, NN-fTNSs offer a physically motivated alternative fermionic structure. Furthermore, compared to such states, NN-fTNSs naturally exhibit improved computational scaling and we demonstrate a construction that achieves linear scaling with the lattice size.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2026

Low-Field EMR Studies of Permalloy Films and Gratings

Flat and profile-modulated permalloy films have been studied by the electron magnetic resonance (EMR) method. In addition to ferromagnetic and spin-wave resonances, the structures demonstrate low-field EMR signals of an unusual shape, which form a hysteresis loop in sweeping fields. The low-field signals are attributed to a fast reorientation of magnetic domains. The low-field EMR behavior is comparable to the behavior in magneto-dependent photovoltage previously observed in the optical experiments. The shapes of the loops and typical values of the switching fields depend on the profile modulation parameters confirming the possibility of controlling magnetic properties and the coupling of magnetic and optical effects with nanoscale geometry.

36 MATERIALS SCIENCE↗
NASA NTRS1993

Orbiter lessons learned: A guide to future vehicle development

Topics addressed are: (1) wind persistence loads methodology; (2) emphasize supportability in design of reusable vehicles; (3) design for robustness; (4) improved aerodynamic environment prediction methods for complex vehicles; (5) automated integration of aerothermal, manufacturing, and structures analysis; (6) continued electronic documentation of structural design and analysis; and (7) landing gear rollout load simulations.

Greenberg, Harry Stan↗
NASA NTRS1996

Electronic Structure of TIBa(sub 2)CaCu(sub 2)O(sub 7-delta)

The core levels of TIBa(sub 2)CaCu(sub 2)O(sub 7-delta) epitaxial films have been measured with x-ray photoelectron spectroscopy (XPS). The valence electronic structure has been determined using the full-potential linear muffin tin orbital band structure method and measured with XPS.

Epitaxial films van Hove Fermi level↗
DOE OSTI2020

Many-body electronic structure of LaScO 3 by real-space quantum Monte Carlo

We present real space quantum Monte Carlo (QMC) calculations of the scandate LaSc0 3 that proved to be challenging for traditional electronic structure approaches due to strong correlation effects resulting in inaccurate band gaps from DFT and GW methods when compared with existing experimental data. Besides calculating an accurate QMC band gap corrected for supercell size biases and in agreement with numerous experiments, we also predict the cohesive energy of the crystal using the standard fixed-node QMC without any empirical or non-variational parameters. We show that promotion (optical) gap and fundamental gap agree with each other illustrating a clear absence of significant excitonic effects in the ideal crystal. We obtained these results in perfect consistency in two independent tracks that employ different basis sets (plane wave vs. localized gaussians), different codes for generating orbitals (QUANTUM ESPRESSO vs. CRYSTAL), different QMC codes (QMCPACK vs. QWALK) and different high-accuracy pseudopotentials (ccECPs vs. Troullier-Martins) presenting the maturity and consistency of QMC methodology and tools for studies of strongly correlated problems.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Mapping strain and structural heterogeneities around bubbles in amorphous ionically conductive Bi 2 O 3

While amorphous materials are often approximated to have a statistically homogeneous atomic structure, they frequently exhibit localized structural heterogeneity that challenges simplified models. This study uses 4D scanning transmission electron microscopy to investigate the strain and structural modifications around gas bubbles in amorphous Bi 2 O 3 induced by argon irradiation. We present a method for determining strain fields surrounding bubbles that can be used to measure the internal pressure of the gas. Compressive strain is observed around the cavities, with higher-order crystalline symmetries emerging near the cavity interfaces, suggesting paracrystalline ordering as a result of bubble coarsening. This ordering, along with a compressive strain gradient, indicates that gas bubbles induce significant localized changes in atomic packing. By analyzing strain fields with maximum compressive strains of 3%, we estimate a lower bound on the internal pressure of the bubbles at 2.5 GPa. These findings provide insight into the complex structural behavior of amorphous materials under stress, particularly in systems with gas inclusions, and offer new methods for probing the local atomic structure in disordered materials. Although considering structural heterogeneity in amorphous systems is non-trivial, these features have crucial impacts on material functionalities, such as mechanical strength, ionic conductivity, and electronic mobility.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Quantification of silicon carbide grain structure in TRISO fuel by BSE image analysis

The grain structure of the silicon carbide (SiC) layer in tristructural-isotropic (TRISO) fuels has commonly been qualified in fuel specifications based on a qualitative comparison to visual standards to ensure undesirable microstructure are not produced. This approach is inherently dependent on subjective judgement and provides limited data for analysis or comparison. An alternative method to rapidly quantify (i.e., provide a numeric measure of) the grain structure of the SiC layer in TRISO fuels has been developed. This method relies on the identification of silicon carbide grain boundaries based on brightness variation in backscattered electron (BSE) images through the application of automated image processing algorithms. The speed with which the requisite BSE imaging and analysis may be completed enables the practical use of this method on an industrial scale as a part of qualifying TRISO fuel to meet a given specification on silicon carbide grain structure, which is an important parameter for TRISO fuel performance. The method is benchmarked by comparison to prior Electron-Backscattered Diffraction (EBSD) results for TRISO particles from the Advanced Gas Reactor (AGR) program.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2026

Investigating the electrical transport properties and electronic structure of Zr 2 ⁢CuSb 3

The checkerboard lattice has been proposed to host topological flat bands as a result of destructive interference among its various electronic hopping terms. However, it has proven challenging to realize experimentally due to the difficulty of isolating this structure from any significant out-of-plane bonding while maintaining structural integrity. Here, in this study, single crystals of Zr 2 CuSb 3 , a potential candidate for the checkerboard lattice, were synthesized using the solution (self-flux) method, and their structure was confirmed via x-ray diffraction. Electrical-transport measurements indicate metallic behavior with electron-dominated carriers. Angle-resolved photoemission spectroscopy reveals multiple electron pockets and significant k z broadening due to its large c axis and low dispersion features in k z . Density-functional theory (DFT) calculations further disentangle the contributions from each high-symmetry plane, providing a comprehensive characterization of electronic behavior. The DFT calculations were then used to determine the orbital contributions of the bands and detect the out-of-plane bonding which prevented the flat bands from forming.

Downey, Eoghan [Univ. of Michigan, Ann Arbor, MI (↗
DOE OSTI2020

Electronic Structure Theories of Singlet Fission and Multiple Exciton Generation (Final Report)

This DOE grant supported the development of electronic structure theory, algorithms, and computer programs for simulating singlet fission and multiple excision generation processes from Sept. 2013 to Aug. 2018 (which was terminated due to the PI’s departure from Northwestern University to industry). One of the main achievements is the development of the so-called active space decomposition (ASD) method hat describes exciton dynamics in organic semiconductors and spin dynamics in strongly correlated materials. The resulting software was interfaced with the Brilliantly Advanced General Electronic-structure Library (BAGEL) package and widely disseminated to the research community.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2025

Uncovering multiscale structure-property correlations via active learning in scanning tunneling microscopy

Atomic arrangements and local sub-structures fundamentally influence emergent material functionalities. These structures are conventionally probed using spatially resolved studies and the property correlations are deciphered by a researcher based on sequential explorations, thereby limiting the efficiency and scope. Here we demonstrate a multi-scale Bayesian deep-learning based framework that automatically correlates material structure with its electronic properties using scanning tunneling microscopy (STM) measurements in real-time. Its predictions are used to autonomously direct exploration toward regions of the sample that optimize a given material property. This method is deployed on a low-temperature ultra-high vacuum STM to understand the structure-property relationship in a europium-based semimetal, EuZn 2 As 2 , a promising candidate relevant to magnetism-driven topological phenomena. The framework employs a sparse-sampling approach to efficiently construct the scalar-property space using minimal measurements, about 1–10% of the data required in standard hyperspectral methods. Moreover, we formulate the problem hierarchically across length scales, implementing autonomous workflow to locate mesoscopic and atomic structures that correspond to a target material property. This framework offers the choice to design scalar-property from the spectroscopic data to steer sample exploration. Our findings reveal correlations of the electronic properties unique to surface terminations, local defect density, and point defects.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Ultrafast high-harmonic spectroscopy of solids

High-harmonic spectroscopy, an ultrafast all-optical technique initially conceptualized in atomic and molecular systems, has now emerged as a powerful platform for studying the structure and dynamics of condensed matter. Unlike that in the gas phase, solid-state high-harmonic generation relies on the fundamental response from high atomic density and periodicity, leading to interband transitions and coherent driving of electrons and holes in their respective bands. These mechanisms make high-harmonic spectroscopy particularly sensitive to the electronic band structure, topological properties and many-body correlations in condensed media. An advantage of high-harmonic spectroscopy over other spectroscopic methods is its ability to probe ultrafast phenomena, capturing femto- to attosecond dynamics of multi-band and strongly correlated electron interactions in solids. Furthermore, in this Review, we discuss the latest experimental and theoretical advances in ultrafast high-harmonic spectroscopy of solids and provide perspectives for future research in this field.

High-harmonic generation↗
NASA NTRS1996

Direct Observation of Momentum Conservation at the Au/Si Interface Using BEEM (abstract)

The verification of parallel momentum conservation at a metal/semiconductor interface is a fundamental issue in interface transport. Ballistic-electron-microscopy (BEEM) is a recently developed method for probing interfaces with nanometer resolution. In this talk, BEEM spectroscopy on Au/Si(111) structures as a function of Au thickness and temperature will be described.

metal/semiconductor interface ballistic-electron-e↗
DOE OSTI2025

Development of a TSR-based method for understanding structural relationships of cofactors and local environments in photosystem I

All chemical forms of energy and oxygen on Earth are generated via photosynthesis where light energy is converted into redox energy by two photosystems (PS I and PS II). There is an increasing number of PS I 3D structures deposited in the Protein Data Bank (PDB). The Triangular Spatial Relationship (TSR)-based algorithm converts 3D structures into integers (TSR keys). A comprehensive study was conducted, by taking advantage of the PS I 3D structures and the TSR-based algorithm, to answer three questions: (i) Are electron cofactors including P700, A -1 and A 0 , which are chemically identical chlorophylls, structurally different? (ii) There are two electron transfer chains (A and B branches) in PS I. Are the cofactors on both branches structurally different? (iii) Are the amino acids in cofactor binding sites structurally different from those not in cofactor binding sites? The key contributions and important findings include: (i) a novel TSR-based method for representing 3D structures of pigments as well as for quantifying pigment structures was developed; (ii) the results revealed that the redox cofactor, P700, are structurally conserved and different from other redox factors. Similar situations were also observed for both A -1 and A 0 ; (iii) the results demonstrated structural differences between A and B branches for the redox cofactors P700, A -1 , A 0 and A 1 as well as their cofactor binding sites; (iv) the tryptophan residues close to A 0 and A 1 are structurally conserved; (v) The TSR-based method outperforms the Root Mean Square Deviation (RMSD) and the Ultrafast Shape Recognition (USR) methods. The structural analyses of redox cofactors and their binding sites provide a foundation for understanding the unique chemical and physical properties of each redox cofactor in PS I, which are essential for modulating the rate and direction of energy and electron transfers.

59 BASIC BIOLOGICAL SCIENCES↗