Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “electrode interface”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44

Effect of resonance in external radio-frequency circuit on very high frequency plasma discharge

A fully electromagnetic plasma model for an asymmetric capacitively coupled plasma discharge is used to understand the interaction between the external radio-frequency (rf) distributed circuit and the plasma. The plasma is excited using a 150 MHz rf source connected to the top electrode, the bottom electrode is connected to a shorted transmission line, and the electrodes are separated from the chamber walls through dielectric rings. Under typical conditions, the electron density peaks in the center of the plasma chamber due to the standing electromagnetic wave and the rf current from the top electrode primarily returns through the bottom electrode. When the electrical length of the bottom transmission line is adjusted such that it presents a large (open-circuit) impedance at the plasma chamber interface, the rf return current shifts from the bottom electrode to the chamber wall. As a consequence, the peak in electron density also moves from the center of the chamber toward its outer periphery.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Origin of Low-Energy Spurious Peaks in Spectroscopic Measurements With Silicon Detectors

We report that when an uncollimated radioactive X-ray source illuminates a silicon PIN sensor, some ionizing events are generated in the nonimplanted gap between the active area of the sensor and the guard rings (GRs). Carriers can be collected by floating electrodes, i.e., electron accumulation layers at the silicon/oxide interface, and floating GRs. The crosstalk signals generated by these events create spurious peaks, replicas of the main peaks at either lower amplitude or of opposite polarity. Lastly, we explain this phenomenon as crosstalk caused by charge collected on these floating electrodes, which can be analyzed by means of an extension of Ramo theorem.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Fundamental Investigations of Mechanical and Chemical Degradation Mechanisms in Lithium Ion Battery Materials (Final Technical Report)

The objective of our effort under the DOE EPSCoR Implementation grant is to establish a comprehensive and internationally recognized research program at Brown University and University of Rhode Island in understanding degradation mechanisms and to improve the cycle and calendar life of lithium ion battery (LIB) materials. A series of basic investigations are undertaken to characterize the mechanical and chemical degradation mechanisms, which can help enable new higher capacity and longer lasting electrode designs. Controlling mechanical and chemical degradation is the primary challenge in developing the next generation of higher energy density batteries. The development of failure resistant battery microstructures will require a fundamental understanding of the evolution of stress, deformation, damage, and electrochemistry in battery materials during cyclic charging and discharging. In addition, controlling the reactions at the electrode/electrolyte interface is critical for the formation of a stable SEI layer. We address these issues through a combination of controlled experiments on model battery materials and practical composite electrodes, together with multi-scale computations. Our effort is organized into three focus areas that encompass many critical challenges in Lithium Ion Battery Technologies: (i) Mechanical properties, fracture and damage in electrode materials; (ii) Chemistry and Mechanics of Solid Electrolyte Interphase (SEI); (iii) Mechanical and Chemical Integrity of Solid-Solid Interfaces in Practical Electrodes.

25 ENERGY STORAGE↗

Aqueous vs. nonaqueous Zn-ion batteries: consequences of the desolvation penalty at the interface

Zinc ion batteries using metallic zinc as the negative electrode have gained considerable interest for electrochemical energy storage, whose development is crucial for the adoption of renewable energy technologies, as zinc has a very high volumetric capacity (5845 mA h cm -3 ), is inexpensive and compatible with aqueous electrolytes. However, the divalent charge of zinc ions, which restricts the choice of host material due to hindered solid-state diffusion, can also pose a problem for interfacial charge transfer. We report our findings on reversible intercalation of up to two Zn 2+ ions in layered V 3 O 7 ·H 2 O. This material exhibits very high capacity and power (375 mA h g -1 at a 1C rate, and 275 mA h g -1 at an 8C rate) in an aqueous electrolyte compared to a very low capacity and slow rate capabilities in a nonaqueous medium. Operando XRD studies, together with impedance analysis, reveal solid solution behavior associated with Zn 2+ -ion diffusion within a water monolayer in the interlayer gap in both systems, but very sluggish interfacial charge transfer in the nonaqueous electrolyte. This points to desolvation at the interface as a major factor in dictating the kinetics. Temperature dependent impedance studies show high activation energies associated with the nonaqueous charge transfer process, identifying the origin of poor electrochemical performance.

25 ENERGY STORAGE↗

Degradation Diagnostics from the Subsurface of Lithium-Ion Battery Electrodes

Despite the long-established rocking-chair theory of lithium-ion batteries (LIBs), developing novel characterization methodology with higher spatiotemporal resolution facilitates a better understanding of the solid electrolyte interphase studies to shape the reaction mechanisms. In this work, we develop a Xenon ion plasma focused ion beam (Xe + PFIB)-based characterization technique to probe the cross-sectional interface of both ternary cathode and graphite anode electrodes, with the focus on revealing the chemical composition and distribution underneath the electrode surface by in-depth analysis of secondary ions. Particularly, the lithium fluoride is detected in the pristine cathode prior to contact with the electrolyte, reflecting that the electrode degradation is in the form of the loss of lithium inventory during electrode preparation. This degradation is related to the hydrolysis of the cathode material and the decomposition of the PVDF binder. Here, through the quantitative analysis of the transition-metal degradation products, manganese is found to be the dominant element in the newly formed inactive fluoride deposition on the cathode, while no transition metal signal can be found inside the anode electrode. These insights at high resolution implemented via a PFIB-based characterization technique not only enrich the understanding of the degradation mechanism in the LIBs but also identify and enable a high-sensitivity methodology to obtain the chemical survey at the subsurface, which will help remove the capacity-fade observed in most LIBs.

25 ENERGY STORAGE↗

Influence of magnetic electrodes thicknesses on the transport properties of magnetic tunnel junctions with perpendicular anisotropy

The influence of the bottom and top magnetic electrodes thicknesses on both perpendicular anisotropy and transport properties is studied in (Co/Pt)/Ta/CoFeB/MgO/FeCoB/Ta magnetic tunnel junctions. By carefully investigating the relative magnetic moment of the two electrodes as a function of their thicknesses, we identify and quantify the presence of magnetically dead layers, likely localized at the interfaces with Ta, that is, 0.33 nm for the bottom electrode and 0.60 nm for the top one. Critical thicknesses (spin-reorientation transitions) are determined as 1.60 and 1.65 nm for bottom and top electrodes, respectively. The tunnel magnetoresistance ratio reaches its maximum value, as soon as both effective (corrected from dead layer) electrode thicknesses exceed 0.6 nm.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Thermoelectric energy recovery at ionic-liquid/electrode interface

A thermally chargeable capacitor containing a binary solution of 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)-imide in acetonitrile is electrically charged by applying a temperature gradient to two ideally polarisable electrodes. The corresponding thermoelectric coefficient is −1.7 mV/K for platinum foil electrodes and −0.3 mV/K for nanoporous carbon electrodes. Stored electrical energy is extracted by discharging the capacitor through a resistor. The measured capacitance of the electrode/ionic-liquid interface is 5 μF for each platinum electrode while it becomes four orders of magnitude larger, ≈36 mF, for a single nanoporous carbon electrode. Reproducibility of the effect through repeated charging-discharging cycles under a steady-state temperature gradient demonstrates the robustness of the electrical charging process at the liquid/electrode interface. The acceleration of the charging by convective flows is also observed. This offers the possibility to convert waste-heat into electric energy without exchanging electrons between ions and electrodes, in contrast to what occurs in most thermogalvanic cells.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

In Situ Analytical Electron Microscopy for Probing Nanoscale Electrochemistry

Oxides and their tailored structures are at the heart of electrochemical energy storage technologies and advances in understanding and controlling the dynamic behaviors in the complex oxides, particularly at the interfaces, during electrochemical processes will catalyze creative design concepts for new materials with enhanced and better-understood properties. Such knowledge is not accessible without new analytical tools. New innovative experimental techniques are needed for understanding the chemistry and structure of the bulk and interfaces, more importantly how they change with electrochemical processes in situ. Analytical Transmission Electron Microscopy (TEM) is used extensively to study electrode materials ex situ and is one of the most powerful tools to obtain structural, morphological, and compositional information at nanometer scale by combining imaging, diffraction and spectroscopy, e.g., EDS (energy dispersive X-ray spectrometry) and Electron Energy Loss Spectrometry (EELS). Determining the composition/structure evolution upon electrochemical cycling at the bulk and interfaces can be addressed by new electron microscopy technique with which one can observe, at the nanometer scale and in situ, the dynamic phenomena in the electrode materials. In electrochemical systems, for instance in a lithium ion battery (LIB), materials operate under conditions that are far from equilibrium, so that the materials studied ex situ may not capture the processes that occur in situ in a working battery. In situ electrochemical operation in the ultra-high vacuum column of a TEM has been pursued by two major strategies. In one strategy, a 'nano-battery' can be fabricated from an all-solid-state thin film battery using a focused ion beam (FIB). The electrolyte is either polymer based or ceramic based without any liquid component. As shown in Fig. 1a, the interfaces between the active electrode material/electrolyte can be clearly observed with TEM imaging, in contrast to the composite electrodes/electrolyte interfaces in conventional lithium ion batteries, depicted in Fig.1b, where quantitative interface characterization is extremely difficult if not impossible. A second strategy involves organic electrolyte, though this approach more closely resembles the actual operation conditions of a LIB, the extreme volatility In Situ Analytical Electron Microscopy for Probing Nanoscale Electrochemistry by Ying Shirley Meng, Thomas McGilvray, Ming-Che Yang, Danijel Gostovic, Feng Wang, Dongli Zeng, Yimei Zhu, and Jason Graetz of the organic electrolytes present significant challenges for designing an in situ cell that is suitable for the vacuum environment of the TEM. Significant progress has been made in the past few years on the development of in situ electron microscopy for probing nanoscale electrochemistry. In 2008, Brazier et al. reported the first cross-section observation of an all solid-state lithium ion nano-battery by TEM. In this study the FIB was used to make a 'nano-battery,' from an all solid-state battery prepared by pulsed laser deposition (PLD). In situ TEM observations were not possible at that time due to several key challenges such as the lack of a suitable biasing sample holder and vacuum transfer of sample. In 2010, Yamamoto et al. successfully observed changes of electric potential in an all-solid-state lithium ion battery in situ with electron holography (EH). The 2D potential distribution resulting from movement of lithium ions near the positive-electrode/electrolyte interface was quantified. More recently Huang et al. and Wang et al. reported the in situ observations of the electrochemical lithiation of a single SnO{sub 2} nanowire electrode in two different in situ setups. In their approach, a vacuum compatible ionic liquid is used as the electrolyte, eliminating the need for complicated membrane sealing to prevent the evaporation of carbonate based organic electrolyte into the TEM column. One main limitation of this approach is that EELS spectral imaging is not possible due to the high plasmon signal of the ionic liquid. To this end, we have developed a novel in situ instrumental system combining analytical electron microscopy with advanced spectroscopy to probe the dynamic phenomena in an all solid-state nano-battery. In situ electron microscopy is a versatile technique that yields insights into challenging questions that could not be obtained using other techniques. However, in order to fully exploit the capabilities, a very carefully thought-out plan of action is essential. It is important to recognize that this is not just a simple characterization tool, but a collection of tools that make up a complete experimental set-up: the choice of FIB operation conditions, specimen holder for biasing, grid materials and design as well as microscope environment must be thoroughly considered before performing an experiment.

08 HYDROGEN↗

Requirements for Enabling Extreme Fast Charging of High Energy Density Li-Ion Cells while Avoiding Lithium Plating

To improve electric vehicle market acceptance, the charge time of their batteries should be reduced to 10–15 minutes. However, achieving 4C to 6C charge rates with today’s batteries is only possible for cells with thin electrodes coming at the expense of low energy density and high battery manufacturing cost. An electrochemical model is validated versus high rate charge data for cells with several loadings. The model elucidates that the main limitations for high energy density cells are poor electrolyte transport resulting in salt depletion within the anode and Li plating at the graphite/separator interface. Next, the model is used to understand what future electrode and electrolyte properties can help enable 4C and 6C charging. Ideally, future electrolytes would be identified with 2X conductivity, 3–4X diffusivity, and transference number of 0.5–0.6. Alternatively charging at elevated temperatures enhances electrolyte transport by 1.5X conductivity and 2–3X diffusivity with a negligible effect on transference number. Another effective strategy to enable 4C and 6C charging is reducing electrode tortuosity. Conversely, increasing electrode porosity and negative/positive ratio are ineffective strategies to improve fast charge capability.

Batteries↗

Microscale Electrochemical Corrosion of Uranium Oxide Particles

Understanding the corrosion of spent nuclear fuel is important for the development of long-term storage solutions. However, the risk of radiation contamination presents challenges for experimental analysis. Adapted from the system for analysis at the liquid–vacuum interface (SALVI), we developed a miniaturized uranium oxide (UO 2 )-attached working electrode (WE) to reduce contamination risk. To protect UO 2 particles in a miniatured electrochemical cell, a thin layer of Nafion was formed on the surface. Atomic force microscopy (AFM) shows a dense layer of UO 2 particles and indicates their participation in electrochemical reactions. Particles remain intact on the electrode surface with slight redistribution. X-ray photoelectron spectroscopy (XPS) reveals a difference in the distribution of U(IV), U(V), and U(VI) between pristine and corroded UO 2 electrodes. The presence of U(V)/U(VI) on the corroded electrode surface demonstrates that electrochemically driven UO 2 oxidation can be studied using these cells. Our observations of U(V) in the micro-electrode due to the selective semi-permeability of Nafion suggest that interfacial water plays a key role, potentially simulating a water-lean scenario in fuel storage conditions. This novel approach offers analytical reproducibility, design flexibility, a small footprint, and a low irradiation dose, while separating the α-effect. This approach provides a valuable microscale electrochemical platform for spent fuel corrosion studies with minimal radiological materials and the potential for diverse configurations.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Communication: Energy-dependent resonance broadening in symmetric and asymmetric molecular junctions from an ab initio non-equilibrium Green's function approach

The electronic structure of organic-inorganic interfaces often features resonances originating from discrete molecular orbitals coupled to continuum lead states. An example is molecular junction, individual molecules bridging electrodes, where the shape and peak energy of such resonances dictate junction conductance, thermopower, I-V characteristics, and related transport properties. In molecular junctions where off-resonance coherent tunneling dominates transport, resonance peaks in the transmission function are often assumed to be Lorentzian functions with an energy-independent broadening parameter Γ. Here we define a new energy-dependent resonance broadening function, Γ(E), based on diagonalization of non-Hermitian matrices, which can describe resonances of a more complex, non-Lorentzian nature and can be decomposed into components associated with the left and right leads, respectively. We compute this quantity via an ab initio non-equilibrium Green's function (NEGF) approach based on density functional theory (DFT) for both symmetric and asymmetric molecular junctions, and show that our definition of Γ(E), when combined with Breit-Wigner formula, reproduces the transmission calculated from DFT-NEGF. Through a series of examples, we illustrate how this approach can shed new light on experiments and understanding of junction transport properties in terms of molecular orbitals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Tunneling field-effect junctions with WS 2 barrier

Transition metal dichalcogenides (TMDCs), with their two-dimensional structures and sizable bandgaps, are good candidates for barrier materials in tunneling field-effect junctions (TFEJ) formed from atomic precision vertical stacks of graphene and insulating crystals of a few atomic layers in thickness. Here we report first-principles study of the electronic properties of the Graphene/WS 2 /Graphene sandwich structure revealing strong interface effects on dielectric properties and predicting a high ON/OFF ratio with an appropriate WS 2 thickness and a suitable range of the gate voltage. Both the band spin-orbit coupling splitting and the dielectric constant of the WS 2 layer depend on its thickness when in contact with the graphene electrodes, indicating strong influence from graphene across the interfaces. The dielectric constant is significantly reduced from the bulk WS 2 value. The effective barrier height varies with WS 2 thickness and can be tuned by a gate voltage. These results are critical for future nanoelectronic device applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Organic Thin-Film Solar Cells Based on Donor-Acceptor Interpenetrating Nano-Interface

Photovoltaic cells with interpenetrating interfaces between a conducting polymer layer and a fullerene layer fabricated by a solvent corrosion method have been investigated. Using a weakly dissoluble combination of a solvent and an underlayer film, we fabricated a ''semi-layered'' structure that was maintaining a bilayer structure and furthermore interpenetrating at the interface of the conducting polymer and the fullerene layers. In these cells, high external quantum efficiencies (EQE) were obtained. The photovoltaic properties have been interpreted by the effective absorption of incident photons around the interface of conducting polymer and fullerene, the interpenetrating fullerene / conducting polymer interface involving the efficient photo-induced charge transfer, and the short distance between the electron-generation region and electrode resulting in the enhancement of the electron collection to the electrode. In these cells, both of the efficient exciton dissociations at the interpenetrating interface and the efficient carrier transports by each continuous pathway for electrons between fullerene molecules and for holes between conducting polymers occur.

36 MATERIALS SCIENCE↗

Critical Causes of Degradation in Integrated Laboratory Scale Cells during High Temperature Electrolysis

An ongoing project at Idaho National Laboratory involves generating hydrogen from steam using solid oxide electrolysis cells (SOEC). This report describes background information about SOECs, the Integrated Laboratory Scale (ILS) testing of solid-oxide electrolysis stacks, ILS performance degradation, and post-test examination of SOECs by various researchers. The ILS test was a 720- cell, three-module test comprised of 12 stacks of 60 cells each. A peak H2 production rate of 5.7 Nm3/hr was achieved. Initially, the module area-specific resistance ranged from 1.25 Ocm2 to just over 2 Ocm2. Total H2 production rate decreased from 5.7 Nm3/hr to a steady state value of 0.7 Nm3/hr. The decrease was primarily due to cell degradation. Post test examination by Ceramatec showed that the hydrogen electrode appeared to be in good condition. The oxygen evolution electrode does show delamination in operation and an apparent foreign layer deposited at the electrolyte interface. Post test examination by Argonne National Laboratory showed that the O2-electrode delaminated from the electrolyte near the edge. One possible reason for this delamination is excessive pressure buildup with high O2 flow in the over-sintered region. According to post test examination at the Massachusetts Institute of Technology, the electrochemical reactions have been recognized as one of the prevalent causes of their degradation. Specifically, two important degradation mechanisms were examined: (1) transport of Crcontaining species from steel interconnects into the oxygen electrode and LSC bond layers in SOECs, and (2) cation segregation and phase separation in the bond layer. INL conducted a workshop October 27, 2008 to discuss possible causes of degradation in a SOEC stack. Generally, it was agreed that the following are major degradation issues relating to SOECs: • Delamination of the O2-electrode and bond layer on the steam/O2-electrode side • Contaminants (Ni, Cr, Si, etc.) on reaction sites (triple phase boundary) • Loss of electrical/ionic conductivity of electrolyte.

99 GENERAL AND MISCELLANEOUS↗

Vibrational Probe at the Electrochemical Interface: Dependence on Plasmon Coupling and Potential of the Lineshape in Two-Dimensional Infrared Spectroscopy

Two-dimensional infrared spectroscopy of vibrational probes at an electrode surface shows promise for studying the structural dynamics at an active electrochemical interface. This interface is a complex environment where the solution structures in response to the applied potential. A strategy for achieving the necessary monolayer sensitivity is to use a plasmonically active electrode, which enhances the electromagnetic fields that produce the spectroscopic response. Here, in this study, we show how the coupling between the plasmon and the vibrations of the molecular monolayer impacts the FTIR and 2D IR spectroscopy, with an emphasis on the electrochemical potential difference spectra. We show how mixing between the vibrational and plasmonic states gives rise to the distortions that are observed in these measurements. This provides an important step toward 2D IR measurements of vibrational probes at the electrochemical interface as a tool for probing the structural dynamics in the double layer.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Microwave generation by spin Hall nanooscillators with nanopatterned spin injector

We experimentally study spin Hall nano-oscillators based on Pt/ferromagnet bilayers with nanopatterned Pt spin injection layer. We demonstrate that both the spectral characteristics and the electrical current requirements can be simultaneously improved by reducing the spin injection area. Moreover, devices with nanopatterned Pt spin injector exhibit microwave generation over a wide temperature range that extends to room temperature. Studies of devices with additional Pt spacers under the device electrodes show that the oscillation characteristics are affected not only by the spin injection geometry but also by the effects of Pt/ferromagnet interface on the dynamical properties of the ferromagnet.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Theoretical Modeling of Electrochemical Proton-Coupled Electron Transfer

Proton-coupled electron transfer (PCET) plays an essential role in a wide range of electrocatalytic processes. Here, a vast array of theoretical and computational methods have been developed to study electrochemical PCET. These methods can be used to calculate redox potentials and pKa values for molecular electrocatalysts, proton-coupled redox potentials and bond dissociation free energies for PCET at metal and semiconductor interfaces, and reorganization energies associated with electrochemical PCET. Periodic density functional theory can also be used to compute PCET activation energies and perform molecular dynamics simulations of electrochemical interfaces. Various approaches for maintaining a constant electrode potential in electronic structure calculations and modeling complex interactions in the electric double layer (EDL) have been developed. Theoretical formulations for both homogeneous and heterogeneous electrochemical PCET spanning the adiabatic, nonadiabatic, and solvent-controlled regimes have been developed and provide analytical expressions for the rate constants and current densities as functions of applied potential. The quantum mechanical treatment of the proton and inclusion of excited vibronic states have been shown to be critical for describing experimental data, such as Tafel slopes and potential dependent kinetic isotope effects. The calculated rate constants can be used as input to microkinetic models and voltammogram simulations to elucidate complex electrocatalytic processes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Water-Activated VOPO 4 for Magnesium Ion Batteries

Rechargeable Mg batteries, using high capacity and dendrite-free Mg metal anodes, are promising energy storage devices for large scale smart grid due to low cost and high safety. However, the performance of Mg batteries is still plagued by the slow reaction kinetics of their cathode materials. Recent discoveries demonstrate that water in cathode can significantly enhance the Mg-ion diffusion in cathode by an unknown mechanism. Here, we propose the water-activated layered-structure VOPO 4 as a novel cathode material and examine the impact of water in electrode or organic electrolyte on the thermodynamics and kinetics of Mg-ion intercalation/deintercalation in cathodes. Electrochemical measurements verify that water in both VOPO 4 lattice and organic electrolyte can largely activate VOPO 4 cathode. Thermodynamic analysis demonstrates that the water in the electrolyte will equilibrate with the structural water in VOPO 4 lattice, and the water activity in the electrolyte alerts the mechanism and kinetics for electrochemical Mg-ion intercalation in VOPO 4 . Theoretical calculations and experimental results demonstrate that water reduces both the solid-state diffusion barrier in the VOPO 4 electrode and the desolvation penalty at the interface. To achieve fast reaction kinetics, the water activity in the electrolyte should be larger than 10 –2 . The proposed activation mechanism provides guidance for screening and designing novel chemistry for high performance multivalent-ion batteries.

25 ENERGY STORAGE↗