Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “effect measure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44

Titanium doped silicon layers with very high concentration

Ion implantation of Ti into Si at high doses has been performed. After laser annealing the maximum average of substitutional Ti atoms is about 10{sup 18} cm{sup -3}. Hall effect measurements show n-type samples with mobility values of about 400 cm{sup 2}/V s at room temperature. These results clearly indicate that Ti solid solubility limit in Si has been exceeded by far without the formation of a titanium silicide layer. This is a promising result toward obtaining of an intermediate band into Si that allows the design of a new generation of high efficiency solar cell using Ti implanted Si wafers.

36 MATERIALS SCIENCE↗

Electrical properties of n-type GaSb substrates and p-type GaSb buffer layers for InAs/InGaSb superlattice infrared detectors

Lightly doped n-type GaSb substrates with p-type GaSb buffer layers are the preferred templates for growth of InAs/InGaSb superlattices used in infrared detector applications because of relatively high infrared transmission and a close lattice match to the superlattices. We report here temperature dependent resistivity and Hall effect measurements of bare substrates and substrate-p-type buffer layer structures grown by molecular beam epitaxy. Multicarrier analysis of the resistivity and Hall coefficient data demonstrate that high temperature transport in the substrates is due to conduction in both the high mobility zone center Γ band and the low mobility off-center L band. High overall mobility values indicate the absence of close compensation and that improved infrared and transport properties were achieved by a reduction in intrinsic acceptor concentration. Standard transport measurements of the undoped buffer layers show p-type conduction up to 300 K indicating electrical isolation of the buffer layer from the lightly n-type GaSb substrate. However, the highest temperature data indicate the early stages of the expected p to n type conversion which leads to apparent anomalously high carrier concentrations and lower than expected mobilities. Data at 77 K indicate very high quality buffer layers.

36 MATERIALS SCIENCE↗

Persistent photoconductivity and electron mobility in In{sub 0.52}Al{sub 0.48}As/In{sub 0.53}Ga{sub 0.47}As/In{sub 0.52}Al{sub 0.48}As/InP quantum-well structures

The influence of the width of the quantum well L and doping on the band structure, scattering, and electron mobility in nanoheterostructures with an isomorphic In{sub 0.52}Al{sub 0.48}As/In{sub 0.53}Ga{sub 0.47}As/In{sub 0.52}Al{sub 0.48}As quantum well grown on an InP substrate are investigated. The quantum and transport mobilities of electrons in the dimensionally quantized subbands are determined using Shubnikov-de Haas effect measurements. These mobilities are also calculated for the case of ionized-impurity scattering taking into account intersub-band electron transitions. It is shown that ionized-impurity scattering is the dominant mechanism of electron scattering. At temperatures T < 170 K, persistent photoconductivity is observed, which is explained by the spatial separation of photoexcited charge carriers.

36 MATERIALS SCIENCE↗

RADIATIVE TRANSFER IN A CLUMPY UNIVERSE. IV. NEW SYNTHESIS MODELS OF THE COSMIC UV/X-RAY BACKGROUND

We present improved synthesis models of the evolving spectrum of the UV/X-ray diffuse background, updating and extending our previous results. Five new main components are added to our radiative transfer code CUBA: (1) the sawtooth modulation of the background intensity from resonant line absorption in the Lyman series of cosmic hydrogen and helium; (2) the X-ray emission from the obscured and unobscured quasars that gives origin to the X-ray background; (3) a piecewise parameterization of the distribution in redshift and column density of intergalactic absorbers that fits recent measurements of the mean free path of 1 ryd photons; (4) an accurate treatment of the photoionization structure of absorbers, which enters in the calculation of the helium continuum opacity and recombination emissivity; and (5) the UV emission from star-forming galaxies at all redshifts. We provide tables of the predicted H I and He II photoionization and photoheating rates for use, e.g., in cosmological hydrodynamics simulations of the Ly{alpha} forest and a new metallicity-dependent calibration to the UV luminosity density-star formation rate density relation. A 'minimal cosmic reionization model' is also presented in which the galaxy UV emissivity traces recent determinations of the cosmic history of star formation, the luminosity-weighted escape fraction of hydrogen-ionizing radiation increases rapidly with look-back time, the clumping factor of the high-redshift intergalactic medium evolves following the results of hydrodynamic simulations, and Population III stars and miniquasars make a negligible contribution to the metagalactic flux. The model provides a good fit to the hydrogen-ionization rates inferred from flux decrement and proximity effect measurements, predicts that cosmological H II (He III) regions overlap at redshift 6.7 (2.8), and yields an optical depth to Thomson scattering, {tau}{sub es} = 0.084 that is in agreement with Wilkinson Microwave Anisotropy Probe results. Our new background intensities and spectra are sensitive to a number of poorly determined input parameters and suffer from various degeneracies. Their predictive power should be constantly tested against new observations. We are therefore making our redshift-dependent UV/X emissivities and CUBA outputs freely available for public use at http://www.ucolick.org/{approx}pmadau/CUBA.

79 ASTRONOMY AND ASTROPHYSICS↗

Ultra-sensitive Hall sensors based on graphene encapsulated in hexagonal boron nitride

The encapsulation of graphene in hexagonal boron nitride provides graphene on substrate with excellent material quality. Here, we present the fabrication and characterization of Hall sensor elements based on graphene boron nitride heterostructures, where we gain from high mobility and low charge carrier density at room temperature. We show a detailed device characterization including Hall effect measurements under vacuum and ambient conditions. We achieve a current- and voltage-related sensitivity of up to 5700 V/AT and 3 V/VT, respectively, outpacing state-of-the-art silicon and III/V Hall sensor devices. Finally, we extract a magnetic resolution limited by low frequency electric noise of less than 50 nT/√(Hz) making our graphene sensors highly interesting for industrial applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Sage-Grouse and Wind Energy: Biology, Habits, and Potential Effects from Development

Proposed development of domestic energy resources, including wind energy, is expected to impact the sagebrush steppe ecosystem in the western United States. The greater sage-grouse relies on habitats within this ecosystem for survival, yet very little is known about how wind energy development may affect sage-grouse. The purpose of this report is to inform organizations of the impacts wind energy development could have on greater sage-grouse populations and identify information needed to fill gaps in knowledge. Sage-grouse are highly dependent on sagebrush-dominated landscapes for all phases of their life history. Much of their current range overlaps with wind power resources characterized as superb to good across 11 western states. Sage grouse may utilize different habitats during different seasons and usually require a large home range. However, they are habitual, using specific locales during all seasons, and are sensitive to habitat disturbance. Sage-grouse populations have generally been in decline since the mid1960s; the species is currently under review for listing as threatened or endangered by the U.S. Fish and Wildlife Service. Very little is known about wind energy and sage-grouse, but oil- and gas-field developments within the range of the sage-grouse often have caused measurable effects to their populations. Activities and disturbance related to both energy development scenarios are believed to pose some similar threats to the grouse. Sage-grouse populations typically decline following oil and gas development, and birds have been displaced from habitat near infrastructure and locations with human. Notably, it has been shown that female grouse nesting in developed areas had lower annual survival rates. Chick mortality rates also were higher within sight of oil wells. It is not known to what extent the development of wind energy resources will affect sage-grouse populations. Information on local and landscape-level impacts is needed. Before-after control-impact studies are needed to determine impacts to grouse, and information gained could be used within an adaptive management strategy. Research protocols and efforts should be developed collaboratively between industry, resource management, and the research community.

17 WIND ENERGY↗

Boron- and phosphorus-doped polycrystalline silicon thin films prepared by silver-induced layer exchange

Intentional boron and phosphorus doping of polycrystalline silicon thin films on glass prepared by the silver-induced layer exchange is presented. A silver/(titanium) oxide/amorphous silicon stack is annealed at temperatures below the eutectic temperature of the Ag/Si system, leading to a complete layer exchange and simultaneous crystallization of the amorphous silicon. Intentional doping of the amorphous silicon prior to the exchange process results in boron- or phosphorus-doped polycrystalline silicon. Hall effect measurements show carrier concentrations between 2 Multiplication-Sign 10{sup 17} cm{sup -3} and 3 Multiplication-Sign 10{sup 20} cm{sup -3} for phosphorus and 4 Multiplication-Sign 10{sup 18} cm{sup -3} to 3 Multiplication-Sign 10{sup 19} cm{sup -3} for boron-doped layers, with carrier mobilities up to 90 cm{sup 2}/V s.

36 MATERIALS SCIENCE↗

Optical/electrical correlations in ZnO. The plasmonic resonance phase diagram

The Drude equation for dielectric constant ϵ(E) depends on four parameters: ϵ∞, effective mass m*, optical mobility µopt, and optical carrier concentration nopt. By solving this equation at ϵ(Eres)=0, we obtain a relationship between µopt and nopt at constant plasmonic resonance energy Eres [or wavelength λres (µm)=1.2395/Eres (eV)]. A family of µopt versus nopt curves covering a range of λres values (including the limiting wavelength λres=∞) constitutes a plasmonic resonance phase diagram (PRPD) for a semiconductor defined by only ϵ∞ and m*. The PRPD is a convenient instrument that allows an immediate prediction of λres from Hall-effect measurements of µH and nH. We apply the PRPD analysis to a series of ten ZnO samples grown by pulsed laser deposition at 200°C in an ambient of 33%H2:67%Ar and annealed in 25°C steps for 10 min in air at various temperatures from 400 to 600°C. For the samples annealed at 550°C or lower, the µH/nH points yield predicted values of λres that range from 1.07 to 2.80 µm; however, the 575 and 600°C samples are predicted to have no resonance at all. Reflectance curves for the eight samples annealed up to 550 °C decrease slowly from 6 eV down to about Eres= 0.5–1.15 eV, and then increase rapidly for E < Eres. In contrast, there is no such resonance-related increase for the 575 and 600 °C samples. Satisfactory agreement is found between the reflectance minima and the Hall-effect-predicted values of λres.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

The thickness-dependent dynamic magnetic property of Co{sub 2}FeAl films grown by molecular beam epitaxy

Co{sub 2}FeAl films with different thickness were prepared at different temperature by molecular beam epitaxy. Their dynamic magnetic property was studied by the time-resolved magneto-optical Kerr effect measurements. It is observed that the intrinsic damping factor of Co{sub 2}FeAl for [100] orientation is not related to the film's thickness and magnetic anisotropy as well as temperature at high-field regime, but increases with structural disorder of Co{sub 2}FeAl. The dominant contribution from the inhomogeneous magnetic anisotropy is revealed to be responsible for the observed extremely nonlinear and drastic field-dependent damping factors at low-field regime.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Detection of metallic In nanoparticles in InGaN alloys

We report on detection of metallic indium nanoparticles in the In{sub x}Ga{sub 1-x}N alloys grown by plasma-assisted molecular beam epitaxy at x exceeding 0.38 {+-} 0.03, using Hall effect measurements in a wide magnetic field range (up to 30 T). Observation of the abnormally increasing magnetic field dependences of the absolute value of Hall coefficient, approximated in the frames of the model taking into account influence of the highly conductive inclusions, was employed as a reliable criterion of presence of the In nanoparticles in the studied layers. The onset of In inclusions is governed by x rather than growth stoichiometric conditions.

36 MATERIALS SCIENCE↗

Valence band inversion and spin-orbit effects in the electronic structure of monolayer GaSe

Two-dimensional monochalcogenides (MX) have been identified as a unique and promising class of layered materials in recent years. The valence band of single-layer MX, as predicted by theory, is inverted into a bow-shaped (often referred to as an inverted sombrero) and relatively flat dispersion, which is expected to give rise to strongly correlated effects. The inversion leads to an indirect band gap, which is consistent with photoluminescence (PL) experiments, but PL provides no direct evidence of the band inversion in the valence band. Here we demonstrate for a hexagonal MX crystal, gallium selenide (GaSe), using a combination of angle-resolved photoemission spectroscopy (ARPES) and density functional theory (DFT), that the valence band of monolayer (ML) GaSe exhibits a robust inversion of the valence dispersion at the Γ point forming a bow-shaped dispersion with a depth of 120 ± 10 meV between the double valence band maximum along the ΓK direction. We also demonstrate that the deeper-lying bands detected in the ARPES spectrum are consistent with DFT calculations only if spin-orbit coupling is considered. The presented ARPES evidence that spin-orbit coupling leads to the splitting of two fourfold-degenerate states into four Kramers doublets is of significance for PL measurements, as the change in energy of the second highest valence state at the Γ point has a measurable effect on the PL energies in high-energy luminescence. Here, e predict the optical absorption coefficients for the principal transitions in ML GaSe using a four-band k∙p model parametrized from first-principles theory with spin-orbit effects considered.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Gangliosides inhibit bee venom melittin cytotoxicity but not phospholipase A{sub 2}-induced degranulation in mast cells

Sting accident by honeybee causes severe pain, inflammation and allergic reaction through IgE-mediated anaphylaxis. In addition to this hypersensitivity, an anaphylactoid reaction occurs by toxic effects even in a non-allergic person via cytolysis followed by similar clinical manifestations. Auto-injectable epinephrine might be effective for bee stings, but cannot inhibit mast cell lysis and degranulation by venom toxins. We used connective tissue type canine mast cell line (CM-MC) for finding an effective measure that might inhibit bee venom toxicity. We evaluated degranulation and cytotoxicity by measurement of {beta}-hexosaminidase release and MTT assay. Melittin and crude bee venom induced the degranulation and cytotoxicity, which were strongly inhibited by mono-sialoganglioside (G{sub M1}), di-sialoganglioside (G{sub D1a}) and tri-sialoganglioside (G{sub T1b}). In contrast, honeybee venom-derived phospholipase A{sub 2} induced the net degranulation directly without cytotoxicity, which was not inhibited by G{sub M1}, G{sub D1a} and G{sub T1b}. For analysis of distribution of G{alpha}{sub q} and G{alpha}{sub i} protein by western blotting, lipid rafts were isolated by using discontinuous sucrose gradient centrifuge. Melittin disrupted the localization of G{alpha}{sub q} and G{alpha}{sub i} at lipid raft, but gangliosides stabilized the rafts. As a result from this cell-based study, bee venom-induced anaphylactoid reaction can be explained with melittin cytotoxicity and phospholipase A{sub 2}-induced degranulation. Taken together, gangliosides inhibit the effect of melittin such as degranulation, cytotoxicity and lipid raft disruption but not phospholipase A{sub 2}-induced degranulation in mast cells. Our study shows a potential of gangliosides as a therapeutic tool for anaphylactoid reaction by honeybee sting.

60 APPLIED LIFE SCIENCES↗

Effect of pressure on the properties of phosphorus-doped p-type ZnO thin films grown by radio frequency-magnetron sputtering

We report the effect of pressure on the surface morphology, electrical and optical properties of phosphorus (P)-doped p-type ZnO grown by radio frequency magnetron sputtering. The nanorod structures of P-doped ZnO films became dense and flat with decreasing pressure. The Hall effect measurement of the films grown at a pressure of 5-20 mTorr showed an n-type conductivity after rapid thermal annealing. However, the films grown at a low pressure of 1 mTorr showed a p-type conductivity with a hole concentration of 4.71x18{sup 18}/cm{sup 3}. This result showed that the pressure of rf-magnetron sputtering plays a critical role in the growth of P-doped p-type ZnO.

36 MATERIALS SCIENCE↗

Microstructural properties of phosphorus-doped p-type ZnO grown by radio-frequency magnetron sputtering

Phosphorus (P)-doped ZnO thin films were grown by radio-frequency magnetron sputtering to study the microstructural properties of p-type ZnO. As-grown P-doped ZnO, a semi-insulator, was converted to p-type ZnO after being annealed at 800 deg. C in an N{sub 2} ambient. X-ray diffraction, secondary-ion-mass spectrometry, and Hall effect measurements indicated that P{sub 2}O{sub 5} phases in as-grown P-doped ZnO disappeared after thermal annealing to form a substitutional P at an O lattice site, which acts as an acceptor in P-doped ZnO. Transmission electron microscopy showed that the formation of stacking faults was facilitated to release the strain in P-doped ZnO during post-thermal annealing.

36 MATERIALS SCIENCE↗

Role of dislocation scattering on electron mobility in coalescent epitaxial lateral overgrowth layers of InP

In order to clarify the effects of dislocation scattering on electron transport properties, temperature dependent (15-300 K) Hall-effect measurements were applied to the dislocated coalescent and dislocation-free non-coalescent ELO layers of InP prepared by the liquid phase epitaxy. The coalescent ELO layers contain a large number of dislocations, and the non-coalescent ELO layers are dislocation-free. Taking into account, the various electron scattering mechanisms in compound semiconductors, the temperature dependences of electron mobility were analyzed. It is shown that the dislocation scattering based on the charged dislocation line model is dominant transport mechanism in the dislocated coalescent ELO layers at low temperature.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Creating a Comprehensive, Efficient, and Sustainable Nuclear Regulatory Structure: A Process Report from the U.S. Department of Energy's Material Protection, Control and Accounting Program

With the congressionally mandated January 1, 2013 deadline for the U.S. Department of Energy’s (DOE) Nuclear Material Protection, Control and Accounting (MPC&A) program to complete its transition of MPC&A responsibility to the Russian Federation, National Nuclear Security Administration (NNSA) management directed its MPC&A program managers and team leaders to demonstrate that work in ongoing programs would lead to successful and timely achievement of these milestones. In the spirit of planning for successful project completion, the NNSA review of the Russian regulatory development process confirmed the critical importance of an effective regulatory system to a sustainable nuclear protection regime and called for an analysis of the existing Russian regulatory structure and the identification of a plan to ensure a complete MPC&A regulatory foundation. This paper describes the systematic process used by DOE’s MPC&A Regulatory Development Project (RDP) to develop an effective and sustainable MPC&A regulatory structure in the Russian Federation. This nuclear regulatory system will address all non-military Category I and II nuclear materials at State Corporation for Atomic Energy “Rosatom,” the Federal Service for Ecological, Technological, and Nuclear Oversight (Rostechnadzor), the Federal Agency for Marine and River Transport (FAMRT, within the Ministry of Transportation), and the Ministry of Industry and Trade (Minpromtorg). The approach to ensuring a complete and comprehensive nuclear regulatory structure includes five sequential steps. The approach was adopted from DOE’s project management guidelines and was adapted to the regulatory development task by the RDP. The five steps in the Regulatory Development Process are: 1) Define MPC&A Structural Elements; 2) Analyze the existing regulatory documents using the identified Structural Elements; 3) Validate the analysis with Russian colleagues and define the list of documents to be developed; 4) Prioritize and schedule the development of documents; 5) Identify and develop processes to measure effectiveness of regulations. Utilizing this process is resulting in an effective regulatory process that is understood and is being adopted by the four RF organizations. It is anticipated that the current regulatory development process will continue after U.S. support ends. Utilization of the systematic methodology will ensure regulatory development is based on required MPC&A structural elements and will support the continued maintenance and development of an effective regulatory base.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Creating a Comprehensive, Efficient, and Sustainable Nuclear Regulatory Structure

Abstract. With the congressionally mandated January 1, 2013 deadline for the U.S. Department of Energy’s (DOE) Nuclear Material Protection, Control and Accounting (MPC&A) program to complete its transition of MPC&A responsibility to the Russian Federation, NNSA management directed its MPC&A program managers and team leaders to demonstrate that work in ongoing programs would lead to successful and timely achievement of these milestones. In the spirit of planning for successful project completion, the NNSA review of the Russian regulatory development process confirmed the critical importance of an effective regulatory system to a sustainable nuclear protection regime and called for an analysis of the existing Russian regulatory structure and the identification of a plan to ensure a complete MPC&A regulatory foundation. This paper describes the systematic process used by the U.S. DOE MPC&A Regulatory Development Project RDP) to develop an effective and sustainable MPC&A regulatory structure in the Russian Federation. This nuclear regulatory system will address all non-military Category I and II nuclear materials at State Corporation for Atomic Energy “Rosatom,” the Federal Service for Ecological, Technological, and Nuclear Oversight (Rostechnadzor), the Federal Agency for Marine and River Transport (FAMRT, within the Ministry of Transportation), and the Ministry of Industry and Trade (Minpromtorg). The approach to ensuring a complete and comprehensive nuclear regulatory structure includes five sequential steps. The approach was adopted from DOE’s project management guidelines and was adapted to the regulatory development task by the RDP. The five steps in the Regulatory Development Process are: 1) Define MPC&A Structural Elements; 2) Analyze the existing regulatory documents using the identified Structural Elements; 3) Validate the analysis with Russian colleagues and define the list of documents to be developed; 4) Prioritize and schedule the development of documents; 5) Identify and develop processes to measure effectiveness of regulations. Utilizing this process is resulting in an effective regulatory process that is understood and is being adopted by the four RF organizations. It is anticipated that the current regulatory development process will continue after U.S. support ends. Utilization of the systematic methodology will ensure regulatory development is based on required MPC&A structural elements and will support the continued maintenance and development of an effective regulatory base.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Laser induced spin precession in highly anisotropic granular L1{sub 0} FePt

The dynamic magnetic properties of a highly anisotropic, granular L1{sub 0} FePt thin film in magnetic fields up to 7 T are investigated using time-resolved magneto-optical Kerr effect measurements. We find that ultrashort laser pulses induce coherent spin precession in the granular FePt sample. Frequencies of spin precession up to over 400 GHz are observed, which are strongly field and temperature dependent. The high frequencies can be ascribed to the high value of the magnetocrystalline anisotropy constant K{sub u} leading to large anisotropy fields H{sub a} of up to 10.7 T at 170 K. A Gilbert damping parameter of α ∼ 0.1 was derived from the lifetimes of the oscillations.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗