Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “dynamical studies”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44

Experimental Studies on Dynamic Vibration Absorber using Shape Memory Alloy (NiTi) Springs

Shape memory alloy (SMA) springs have been used as actuators in many applications although their use in the vibration control area is very recent. Since shape memory alloys differ from conventional alloy materials in many ways, the traditional design approach for springs is not completely suitable for designing SMA springs. Some vibration control concepts utilizing unique characteristics of SMA's will be presented in this paper.A dynamic vibration absorber (DVA) using shape memory alloy (SMA) actuator is developed for attenuation of vibration in a cantilever beam. The design procedure of the DVA is presented. The system consists of a cantilever beam which is considered to generate the real-time vibration using shaker. A SMA spring is used with a mass attached to its end. The stiffness of the SMA spring is dynamically varied in such a way to attenuate the vibration. Both simulation and experimentation are carried out using PID controller. The experiments were carried out by interfacing the experimental setup with a computer using LabVIEW software, Data acquisition and control are implemented using a PCI data acquisition card. Standard PID controllers have been used to control the vibration of the beam. Experimental results are used to demonstrate the effectiveness of the controllers designed and the usefulness of the proposed test platform by exciting the structure at resonance. In experimental setup, an accelerometer is used to measure the vibration which is fed to computer and correspondingly the SMA spring is actuated to change its stiffness to control the vibration. The results obtained illustrate that the developed DVA using SMA actuator is very effective in reducing structural response and have great potential to be an active vibration control medium.

36 MATERIALS SCIENCE↗

Dynamic susceptibility study on the skyrmion phase stability of Fe{sub 0.7}Co{sub 0.3}Si

The AC susceptibilities of Fe{sub 1−x}Co{sub x}Si (0.1 ≤ x ≤ 0.7) alloys were measured and compared with that of MnSi. The range of skyrmion phase in the H-T phase space was enlarged and moved to higher temperatures when approximately 1/3 of the Fe was substituted with Co. Comparing with MnSi, the skyrmion phase of Fe{sub 0.7}Co{sub 0.3}Si was found thermodynamically more stable under a much lower and narrower critical field near 280 ± 50 Oe. The stability range in the H-T phase space and the free energy reduction ΔE (as a function of the applied magnetic field) for both the Fe{sub 0.7}Co{sub 0.3}Si and MnSi were compared.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Inelastic x-ray scattering studies on dynamic structure factor of polymeric liquid Se under pressure

Inelastic X-ray scattering measurements at 25 MPa using synchrotron radiation were carried out for semiconducting liquid Se at high temperatures up to 1673 K. The excitation energy of the acoustic mode disperses approximately 10-50 % faster than the ultrasonic sound velocity in the observed temperature range while the ultrasonic sound rapidly slows down with increasing temperature. We carried out X-ray scattering measurements and found that the average coordination number at 1673 K is 1.3, indicating that the high temperature liquid consists of short chain molecules. These results suggest that weakening of the interatomic interaction is correlated with breaking of polymeric chain molecules.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Time filtering of event based neutron scattering data: A pathway to study the dynamic structural responses of materials

Time-resolved diffraction has become a vital tool for probing dynamic responses to an applied stimulus. Such experiments traditionally use hardware solutions to histogram measured data into their respective bin. We will show that a major advantage of event-based data acquisition, which time-stamps measured diffraction data with 100 ns accuracy, is much preferred over hardware histogramming of the data by enabling postprocessing for advanced custom binning using a software solution. This approach is made even more powerful by coupling measured diffraction data with metadata about the applied stimuli and material response. In this work, we present a time-filter approach that leverages the power of event-based diffraction collection to reduce stroboscopic data measured over many hours into equally weighted segments that represent subsets of the response to a single cycle of the applied stimulus. We demonstrate this approach by observing ferroelectric/ferroelastic domain wall motion during electric field cycling of BaTiO 3 . Furthermore, the developed approach can readily be expanded to investigate other dynamic phenomena using complex sample environments.

47 OTHER INSTRUMENTATION↗

A study of dynamical processes in the Orion KL region using ALMA—probing molecular outflow and inflow

This work reports high spatial resolution observations toward the Orion KL region with high critical density lines of CH{sub 3}CN (12{sub 4}-11{sub 4}) and CH{sub 3}OH (8{sub –1,8}-7{sub 0,7}), as well as a continuum at ∼1.3 mm band. The observations were made using the Atacama Large Millimeter/Submillimeter Array with a spatial resolution of ∼1.''5 and sensitivity of about 0.07 K and ∼0.18 K for continuum and line, respectively. The observational results showed that the gas in the Orion KL region consists of jet-propelled cores at the ridge and dense cores east and south of the region that are shaped like a wedge ring. The outflow has multiple lobes, which may originate from an explosive ejection, and is not driven by young stellar objects. Four infrared bubbles were found in the Spitzer/IRAC emissions. These bubbles, the distributions of the previously found H{sub 2} jets, the young stellar objects, and molecular gas suggest that BN is the explosive center. The burst time was estimated to be ≤1300 yr. At the same time, signatures of gravitational collapse toward Source I and the hot core were detected with material infall velocities of 1.5 km s{sup –1} and ∼0.6 km s{sup –1}, corresponding to mass accretion rates of 1.2 × 10{sup –3} M {sub ☉}/yr and 8.0 × 10{sup –5} M {sub ☉}/yr, respectively. These observations may support the belief that high-mass stars form via the accretion model, similar to their low-mass counterparts.

79 ASTRONOMY AND ASTROPHYSICS↗

Un-collimated single-photon imaging system for high-sensitivity small animal and plant imaging

In preclinical single-photon emission computed tomography (SPECT) system development the primary objective has been to improve spatial resolution by using novel parallel-hole or multi-pinhole collimator geometries. Furthermore, such high-resolution systems have relatively poor sensitivity (typically 0.01% to 0.1%). In contrast, a system that does not use collimators can achieve very high-sensitivity. Here we present a high-sensitivity un-collimated detector single-photon imaging (UCD-SPI) system for the imaging of both small animals and plants. This scanner consists of two thin, closely spaced, pixelated scintillator detectors that use NaI(Tl), CsI(Na), or BGO. The performance of the system has been characterized by measuring sensitivity, spatial resolution, linearity, detection limits, and uniformity. With 99m Tc (140 keV) at the center of the field of view (20 mm scintillator separation), the sensitivity was measured to be 31.8% using the NaI(Tl) detectors and 40.2% with CsI(Na). The best spatial resolution (FWHM when the image formed as the geometric mean of the two detector heads, 20 mm scintillator separation) was 19.0 mm for NaI(Tl) and 11.9 mm for CsI(Na) at 140 keV, and 19.5 mm for BGO at 1116 keV, which is somewhat degraded compared to the cm-scale resolution obtained with only one detector head and a close source. The quantitative accuracy of the system’s linearity is better than 2% with detection down to activity levels of 100 nCi. Two in vivo animal studies (a renal scan using 99m Tc MAG-3 and a thyroid scan with 123 I) and one plant study (a 99m TcO 4 - xylem transport study) highlight the unique capabilities of this UCD-SPI system. From the renal scan, we observe approximately a one thousand-fold increase in sensitivity compared to the Siemens Inveon SPECT/CT scanner. In conclusion, UCD-SPI is useful for many imaging tasks that do not require excellent spatial resolution, such as high-throughput screening applications, simple radiotracer uptake studies in tumor xenografts, dynamic studies where very good temporal resolution is critical, or in planta imaging of radioisotopes at low concentrations.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Comparative study of dynamical simulation methods for the dissociation of molecular Bose-Einstein condensates

We describe a pairing mean-field theory related to the Hartree-Fock-Bogoliubov approach, and apply it to the dynamics of dissociation of a molecular Bose-Einstein condensate into correlated bosonic atom pairs. We also perform the same simulation using two stochastic phase-space techniques for quantum dynamics - the positive-P representation method and the truncated Wigner method. By comparing the results of our calculations we are able to assess the relative strengths of these theoretical techniques in describing molecular dissociation in one spatial dimension. An important aspect of our analysis is the inclusion of atom-atom interactions, which can be problematic for the positive-P method. We find that the truncated Wigner method mostly agrees with the positive-P simulations, but can be simulated for significantly longer times. The pairing mean-field theory results diverge from the quantum dynamical methods after relatively short times.

74 ATOMIC AND MOLECULAR PHYSICS↗

Using kernel-based statistical distance to study the dynamics of charged particle beams in particle-based simulation codes

Measures of discrepancy between probability distributions (statistical distance) are widely used in the fields of artificial intelligence and machine learning. We describe how certain measures of statistical distance can be implemented as numerical diagnostics for simulations involving charged-particle beams. Related measures of statistical dependence are also described. The resulting diagnostics provide sensitive measures of dynamical processes important for beams in nonlinear or high-intensity systems, which are otherwise difficult to characterize. Here, the focus is on kernel-based methods such as maximum mean discrepancy, which have a well-developed mathematical foundation and reasonable computational complexity. Several benchmark problems and examples involving intense beams are discussed. While the focus is on charged-particle beams, these methods may also be applied to other many-body systems such as plasmas or gravitational systems.

47 OTHER INSTRUMENTATION↗