Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “dynamic structure factor”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44
All sourcesNASA NTRSDOE OSTI
NASA NTRS1982

Small scale structure in the interstellar medium: Orion's threadbare cloak

The interstellar medium in the central portion of the Orion Cloak dynamical feature was examined for evidence of fine structure. Four stars in the Ori OB I association, HD 37017, 37468, 37479, and 37776 bracket the stars in the lower belt region that were studied previously. Two are members of the sigma Ori subcluster. A lower limit to the scale inhomogeneity can be set using these at 0.1 pc, while on a scale of about 10 pc, the high velocity component of the second spectrum ions shows optical depth variation of more than a factor of 5. Neutral lines do not display the high velocity component. Some preliminary abundances are also given.

Shore, S. N.↗
NASA NTRS1985

Directional reflectance factor distributions for cover types of Northern Africa

Directional reflectance factors that spanned the entire exitance hemisphere were collected on the ground throughout the morning period for common cover types in Tunisia, Africa. NOAA 7/8 AVHRR bands 1(0.58-0.68 micron) and 2 (0.7301.1 micron) were used in data collection. The cover types reported were a plowed field, annual grassland, steppe grassland, hard wheat, salt plain, and irrigated wheat. Several of these cover types had geometric structures that are extreme as compared to those reported in the literature. Comparisons were made between the dynamics of the observed reflectance distributions and those reported in the literature. It was found that the dynamics of the measured data could be explained by a combination of soil and vegetation scattering components. The data and analysis further validated physical principles that cause the reflectance distribution dynamics as proposed by field and simulation studies in the literature. Finally, the normalized difference transformation (Band 2 - Band 1)/(Band 1 + Band 2), which is useful in monitoring vegetation cover, generally decreased the variation in signal with changing view angle. However, several exceptions were noted.

Kimes, D. S.↗
NASA NTRS2004

Two-Fluid Models and Interfacial Area Transport in Microgravity Condition

The objective of the present study is to develop a two-fluid model formulation with interfacial area transport equation applicable for microgravity conditions. The new model is expected to make a leapfrog improvement by furnishing the constitutive relations for the interfacial interaction terms with the interfacial area transport equation, which can dynamically model the changes of the interfacial structures. In the first year of this three-year project supported by the U.S. NASA, Office of Biological and Physics Research, the primary focus is to design and construct a ground-based, microgravity two-phase flow simulation facility, in which two immiscible fluids with close density will be used. In predicting the two-phase flow behaviors in any two-phase flow system, the interfacial transfer terms are among the most essential factors in the modeling. These interfacial transfer terms in a two-fluid model specify the rate of phase change, momentum exchange, and energy transfer at the interface between the two phases. For the two-phase flow under the microgravity condition, the stability of the fluid particle interface and the interfacial structures are quite different from those under normal gravity condition. The flow structure may not reach an equilibrium condition and the two fluids may be loosely coupled such that the inertia terms of each fluid should be considered separately by use of the two-fluid model. Previous studies indicated that, unless phase-interaction terms are accurately modeled in the two-fluid model, the complex modeling does not necessarily warrant an accurate solution.

Ishii, Mamoru↗
NASA NTRSDate not supplied

Phosphate (U-Th)/He Thermochronology of Apollo 14 Melt Breccia 14311

Our ability to confidently characterize the impact history of the inner solar system is limited by discrepancies in radiometric dates and age interpretations for lunar rocks, impact melts, and recovered meteorites. It is therefore important to explore different thermally sensitive radiometric systems to unravel the timing and extent of the long term impact flux. Low-temperature thermochronology of lunar samples has the potential to provide more complementary geochronological datasets and further test dynamical models related to the evolution of the inner solar system (e.g., [1]). (U-Th)/He dating is based on the production of 4He atoms by radioactive alpha decay of U and Th (and to a lesser extent, Sm) in a crystal and the thermally activated volumetric diffusion of those 4He nuclides. At high temperatures, the crystal is an open system from which 4He can escape; at lower temperatures, 4He may be retained. This retention temperature depends on factors such as crystal structure and volume fraction of radiation damage in the crystal (e.g., [2, 3]), but is significantly lower for phosphate minerals compared to the diffusion of the radiogenic daughter products in other widely used chronometric systems (e.g., ~75°C in terrestrial apatite (U-Th)/He vs. ~500°C in apatite U-Th-Pb vs. ~900°C in zircon U-Th-Pb chronometry). Phosphate (U-Th)/He dating has been used to decipher peak temperatures and cooling rates related to terrestrial impact events (e.g., [4]). Pairing a low-temperature thermochronometer with higher-temperature approaches (i.e., a combined 207Pb-206Pb and (U-Th)/He approach), can therefore resolve multiple impact ages within a given sample or even grain. However, despite its potential, phosphate (U-Th)/He dating has not been reported on any lunar samples. Here we present the first lunar phosphate (U-Th)/He thermochronology on an Apollo 14 impact melt-breccia.

C A Diaz↗
NASA NTRSDate not supplied

Leveraging Large Eddy Simulations to Characterize Aeroacoustic Environments on Launch Vehicles

NASA's Space Launch System (SLS) program has relied on multiple wind tunnel campaigns to predict expected aeroacoustic environments. Time, cost, Reynolds number matching, contamination from test section acoustics, and limitations in spatial resolution are all factors that impact the use experimental data for development of launch vehicle environments. Methodological and computational advances over the last decade are enabling scale resolving computational fluid dynamics (CFD) simulations to be completed that can address some the challenges with conventional datasets, enabling more complete/accurate modeling of dynamic loading events on ascent. These simulations are classified as so-called "Large-Eddy Simulations" (LES). As the name implies, these simulations seek to directly resolve the turbulence in the largest, most-energetic turbulent structures, or eddies, and the dissipation of the smallest eddies in the flow field, is modeled. Like anything else, these simulations still must undergo rigorous testing and validation for the results to ultimately be trusted in the analysis of a launch vehicle. EV33 has begun to conduct some of this early-stage testing and validation to better support NASA missions in the future.

Jonathan Boustani↗
DOE OSTI2025

pH-SWITCHABLE DYNAMIC BINARY COMPLEXES AS VISCOSITY MODIFYING AGENTS

The study of supramolecular structures has been gaining a lot of momentum in recent years due to their potential application in several interesting areas such as medicine, catalysis, energy, oil and gas, etc. Hydraulic fracturing is one area where the ongoing demand for novel viscosity modifiers has prompted researchers to explore various facets of chemistry. In this study, a dynamic binary complex (DBC) solution is presented, with the potential to be useful in the hydraulic fracturing domain. It has a supramolecular structure that is formed by the self-assembly of oleic acid and diethylenetriamine into an elongated network under alkaline conditions. With less than 2 wt% of constituents in aqueous solution, a viscous gel that exhibits high viscosities even under shear was formed. It was sensitive to pH and salinity, and its zero-shear viscosity could be tuned by a factor of ~280 by changing the pH. Furthermore, its viscous properties were pronounced in the presence of salt. Sand settling tests revealed its potential to hold up sand particles for extended periods of time, longer than 24 hours. In conclusion, this DBC solution system has potential to be utilized as a smart pH-switchable hydraulic fracturing fluid that can be prepared using seawater.

02 PETROLEUM↗
NASA NTRS1991

Nondestructive Structural Damage Detection in Flexible Space Structures Using Vibration Characterization

Spacecraft are susceptible to structural damage over their operating life from impact, environmental loads, and fatigue. Structural damage that is not detected and not corrected may potentially cause more damage and eventually catastrophic structural failure. NASA's current fleet of reusable spacecraft, namely the Space Shuttle, has been flown on several missions. In addition, configurations of future NASA space structures, e.g. Space Station Freedom, are larger and more complex than current structures, making them more susceptible to damage as well as being more difficult to inspect. Consequently, a reliable structural damage detection capability is essential to maintain the flight safety of these structures. Visual inspections alone can not locate impending material failure (fatigue cracks, yielding); it can only observe post-failure situations. An alternative approach is to develop an inspection and monitoring system based on vibration characterization that assesses the integrity of structural and mechanical components. A methodology for detecting structural damage is presented. This methodology is based on utilizing modal test data in conjunction with a correlated analytical model of the structure to: (1) identify the structural dynamic characteristics (resonant frequencies and mode shapes) from measurements of ambient motions and/or force excitation; (2) calculate modal residual force vectors to identify the location of structural damage; and (3) conduct a weighted sensitivity analysis in order to assess the extent of mass and stiffness variations, where structural damage is characterized by stiffness reductions. The approach is unique from other existing approaches in that varying system mass and stiffness, mass center locations, the perturbation of both the natural frequencies and mode shapes, and statistical confidence factors for structural parameters and experimental instrumentation are all accounted for directly.

Ricles, James M.↗
NASA NTRSDate not supplied

Thermoplastic Composite Lunar Tower Truss Structure: Design Development and Verification Plans

The National Aeronautics and Space Administration (NASA) Space Technology and Mission Directorate (STMD) is advancing thermoplastic composite (TPC) technologies for exploration missions. The Technology Development for Exploration Applications (TDEA) project goals are to develop and mature TPC materials, designs, analyses tools and techniques, and mature manufacturing processes. This includes development of manufacturing and joining approaches relevant to space environments. To these ends TDEA endeavors toward demonstrating a TPC truss structure for a lunar tower configuration. The design, predicated on robotic assembly, uses open section truss elements fused to a joint splice plate, without a structural adhesive. This presentation details the TDEA lunar truss structure design development approach including design heritage, the requirements established, the mechanical design and analyses, and thermal analyses demonstrating structural requirements conformance, as well as planned building block verification efforts either underway or planned. The mechanical analyses show the most severe environment is a moon-quake the truss dynamic responses. The thermal analyses show the extreme cold for on-orbit welding, the window for less severe on-orbit welding, as well as the large thermal gradients on the truss. The building block approach shown includes ultrasonic welding and lap shear coupon testing on various truss element thicknesses and layups. Knockdown factor determinations due to lunar dust contamination (simulated) and effects of welding in a vacuum are presented. The most highly loaded truss joint configuration sub-element verification test matrix is outlined. Lastly, plans to build, inspect, and test a 2-bay truss representative unit cell that is 1.5 meters by 1.5 meters by 3.0 meters tall are detailed.

Lunar Tower↗
DOE OSTI2020

Active-Site Environmental Factors Customize the Photophysics of Photoenzymatic Old Yellow Enzymes

The development of non-natural photoenzymatic systems has reinvigorated the study of photoinduced electron transfer (ET) within protein active sites, providing new and unique platforms for understanding how biological environments affect photochemical processes. Here, we use ultrafast spectroscopy to compare the photoinduced electron transfer in known photoenzymes. 12-Oxophytodienoate reductase 1 (OPR1) is compared to Old Yellow Enzyme 1 (OYE1) and morphinone reductase (MR). The latter enzymes are structurally homologous to OPR1. We find that slight differences in the amino acid composition of the active sites of these proteins determine their distinct electron-transfer dynamics. Our work suggests that the inside of a protein active site is a complex/heterogeneous dielectric network where genetically programmed heterogeneity near the site of biological ET can significantly affect the presence and lifetime of various intermediate states. Our work motivates additional tunability of Old Yellow Enzyme active-site reorganization energy and electron-transfer energetics that could be leveraged for photoenzymatic redox approaches.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

AC Magnetometry Using Nano-ferrofluid Cladded Multimode Interferometric Fiber Optic Sensors for Power Grid Monitoring Applications

The AC magnetic field response of the superparamagnetic nano-ferrofluid is an interplay between the Neel and Brownian relaxation processes and is generally quantified via the susceptibility measurements at high frequencies. The high frequency limit is dictated by these relaxation times which need to be shorter than the time scale of the time varying magnetic field for the nano-ferrofluid to be considered in an equilibrium state at each time instant. Even though the high frequency response of ferrofluid has been extensively investigated for frequencies up to GHz range by non-optical methods, harnessing dynamic response by optical means for AC magnetic field sensing in fiber-optic-based sensors-field remains unexplored. Instead, the incorporation of nano-ferrofluid as sensing materials has been only limited to DC magnetic field sensing, often citing their long response time as a limiting factor to AC field sensing. This work reports the finding of high frequency (up to 15 kHz) AC magnetic field sensing capability of nanomagnetic fluid as the cladding material of a fiber-optic multimode interferometry (MMI) structure optimized for the fourth self-imaging spectral response. The key parameter enabling high frequency response is the short response time (<1 ms) achieved by optimizing both the sensing structure and nano-ferrofluid solution. Focus has been imparted on 60 Hz line-frequency profiles of various current/magnetic fields to test the efficacy of these sensors in metering and monitoring current and current-induced magnetic fields in the electrical power grid systems. The magnetic field sensitivity of 240 mV/Gauss per dBm of transmitted power was achieved for 60 Hz field applied via Helmholtz coil, whereas the 60 Hz AC current sensitivity of 2.83 mV/A was measured due to magnetic field induced by current in a straight conducting wire.

42 ENGINEERING↗
DOE OSTI2025

Role of Superlattice Phonons in Charge Localization Across Quantum Dot Arrays

Understanding charge transport in semiconductor quantum dot (QD) assemblies is important for developing the next generation of solar cells and light-harvesting devices based on QD technology. One of the key factors that governs the transport in such systems is related to the hybridization between the QDs. Recent experiments have successfully synthesized QD molecules, arrays, and assemblies by directly fusing the QDs, with enhanced hybridization leading to high carrier mobilities and coherent band-like electronic transport. Here, in this work, we theoretically investigate the electron transfer dynamics across a finite CdSe-CdS core-shell QD array, considering up to seven interconnected QDs in one dimension. We find that, even in the absence of structural and size disorder, electron transfer can become localized by the emergent low-frequency superlattice vibrational modes when the connecting neck between QDs is narrow. On the other hand, we also identify a regime where the same vibrational modes facilitate coherent electron transport when the connecting necks are wide. Overall, we elucidate the crucial effects of electronic and superlattice symmetries and their couplings when designing high-mobility devices based on QD superlattices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Computational study of TATB

We have performed a computational study of TATB. The study is composed of two parts, one where we perform static T = 0 K calculations with several different DFT functionals, to investigate structural properties and obtain a cold curve. Even though the functionals used in this study give poor results at ambient pressure, they perform much better at compression, when the dominance of the van der Waals’ forces in the binding is replaced by more normal interactions. In particular AM05 gives good results, mainly because it doesn’t include any “faulty” van der Waals’. Indeed the van der Waals’ corrected functional (PBE+D2) results shows the worst performance on structural properties. For the cold curve the PBE+D2 functional gives the best results compared to experiments (room temperature) but since the structural properties were bad with this functional we cannot for sure say that this is in any way a validation. It is shown that scaling the AM05 results with a common factor reproduces the experimental data. We leave the question on why to a follow up study but speculate that maybe the experiment and our calculations do not represent the same system set-up. From the structural properties we identify a site in the TATB lattice that contains a high concentration of oxygen and hydrogen. The consequences of this finding, if any, are left to a future project. In the second part of the study we perform extensive high-quality DFT-MD (molecular dynamics with DFT forces) calculations to obtain points on the Hugoniot. This part of the study did not get finished within this project and a more extensive summary of this part will be given in a follow up report at a future date. However, we show that obtaining calculated data is essential for equations of state development since the existing experimental Hugoniot data barely deviates from room temperature isotherm data and thus give no information of the high temperature dependency of materials properties. Our conclusion so far in the project is that being able to calculate materials properties is essential for high explosives since experiments are unable to give information in the high temperature part of phase space. While blind use of DFT cannot (yet) give unambiguous answers, we can still explore qualitatively and use such information to guide us in EOS development. However, the main conclusion is that we need better functionals in DFT to easily extract needed properties from calculations.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Analysis of Two Models for the Angular Structure of the Outflows Producing the Swift/XRT “Larger-angle Emission” of Gamma-Ray Bursts

The quasi-instantaneous emission from a relativistic surface endowed with a Lorentz factor that decreases away from the outflow symmetry axis can naturally explain the three phases observed by Swift X-Ray Telescope (XRT) in gamma-ray bursts (GRBs) and their afterglows (GRB tail, afterglow plateau, and postplateau) based only on the angular change of the relativistic Doppler boost across the outflow surface. We develop further the analytical formalism of the “larger-angle emission” model for the case of “n-exponential” outflows (where the Lorentz factor Γ dependence of the angular location θ is Γ ~ exp{-(θ/θ c ) n }), and compare its ability to account for the X-ray emission of XRT afterglows relative to that of “power-law” outflows (Γ ∼ θ −g ). Power-law outflows yield longer afterglow plateaus, followed by slower postplateau flux decays than n-exponential outflows, features which may be used in identifying which type of angular structure is at work in a given afterglow. Identifying the Γ(θ) angular structure that accommodates XRT light curves is slightly complicated by the fact that the afterglow X-ray light curve is also determined by how two characteristics of the comoving-frame emission spectrum (peak energy $E'_p$ and peak intensity $i'_p$) change with the angular location or, equivalently, with the Lorentz factor. Here, we assume power-law Γ dependences of those spectral characteristics and find that, unlike power-law outflows, n-exponential outflows cannot account for plateaus with a temporal dynamical range larger than 100 (2 dex in logarithmic space). To capture all the information contained in XRT afterglow measurements (0.3–10 keV unabsorbed flux and effective spectral slope), we calculate 0.3 and 10 keV light curves using a broken-power-law emission spectrum of peak energy and low- and high-energy slopes that are derived from the effective slope measured by XRT. This economical peak energy determination is found to be consistent with the results of more expensive spectral fits. The angular distributions of the Lorentz factor, comoving frame peak energy, and peak intensity (Γ(θ), $E'_p$(θ), $i'_p$(θ)) constrain the (yet-to-be determined) convolution of various features of the production of relativistic jets by solar-mass black holes and of their propagation through the progenitor/circumburst medium, while the $E'_p$(Γ) and $i'_p$(Γ) dependences may constrain the GRB dissipation mechanism and the GRB emission process.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS1988

Three dimensional flow simulation with application to aeroelastic analysis

The three-dimensional flowfield about realistic launch vehicle configurations is simulated using the Reynolds-averaged Navier-Stokes equations. Turbulent mixing is accounted for by means of the two-layer Baldwin and Lomax (1978) algebraic eddy viscosity model. The Beam and Warming (1976) implicit approximate factorization algorithm is used for the solution of the finite difference equations. Applications include the study of the flowfield about a hemisphere-cylinder configuration both in the subsonic and supersonic flight regimes, and about two hammerhead payload configurations at transonic speeds. A method is also described which permits incorporating this flow solver into a complete algorithm to perform time-domain aeroelastic stability analyses. The vehicle is modeled as a free-free beam and modal superposition techniques are used for the structural-dynamic formulation. Aeroelastic analyses were performed for the hammerhead configurations.

Azevedo, Joao Luiz F.↗
DOE OSTI2021

Supramolecular dynamic binary complexes with pH and salt-responsive properties for use in unconventional reservoirs

Hydraulic fracturing of unconventional reservoirs has seen a boom in the last century, as a means to fulfill the growing energy demand in the world. The fracturing fluid used in the process plays a substantial role in determining the results. Hence, several research and development efforts have been geared towards developing more sustainable, efficient, and improved fracturing fluids. Herein, we present a dynamic binary complex (DBC) solution, with potential to be useful in the hydraulic fracturing domain. It has a supramolecular structure formed by the self-assembly of low molecular weight viscosifiers (LMWVs) oleic acid and diethylenetriamine into an elongated entangled network under alkaline conditions. With less than 2 wt% constituents dispersed in aqueous solution, a viscous gel that exhibits high viscosities even under shear was formed. Key features include responsiveness to pH and salinity, and a zero-shear viscosity that could be tuned by a factor of ~280 by changing the pH. Furthermore, its viscous properties were more pronounced in the presence of salt. Sand settling tests revealed its potential to hold up sand particles for extended periods of time. In conclusion, this DBC solution system has potential to be utilized as a smart salt-responsive, pH-switchable hydraulic fracturing fluid.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Transitions To Two-Hadron States From Quantum Chromodynamics

The rich spectrum of hadrons reflects the complexity of interactions between the quarks and gluons confined within them. Most of these hadrons are extremely short-lived and are called resonances. Experimentally, they are observed indirectly through their effects on the energy distribution in scattering experiments. Additionally, the non-perturbative nature of Quantum Chromodynamics (QCD), which governs the dynamics of quarks and gluons, prevents the implementation of known analytical techniques for calculating transition and interaction rates between hadrons. Lattice QCD (LQCD), a numerical implementation of QCD, provides a non-perturbative approach to studying the spectrum, as long as we understand how to account for finite-volume and imaginary-time effects in our calculations. In this dissertation, we present two main results. First, the formalism for extracting the elastic form factors of resonances from LQCD, which is necessary to understand their internal structure. Second, we perform the first numerical calculation of a coupled-channel transition, the timelike form factor of the pion, extending into the inelastic region above the kaon-antikaon threshold, as well as its connection to the spacelike region. These developments open the door for future calculations that explore the non-trivial internal structure of QCD resonances.

Gama, Felipe Ortega↗
DOE OSTI2019

The hierarchy of excitation lifetimes in two-dimensional Fermi gases

Momentum-conserving quasiparticle collisions in two-dimensional Fermi gases give rise to a large family of exceptionally long-lived excitation modes. The lifetimes of these modes exceed by a factor (T{sub F}∕T){sup 2}≫1 the conventional Landau Fermi-liquid lifetimes τ∼T{sub F}∕T{sup 2}. The long-lived modes have a distinct angular structure, taking the form of cosmθ and sinmθ with odd m values for a circular Fermi surface, with relaxation rate dependence on m of the form m{sup 4}logm, valid at not-too-large m. In contrast, the even-m harmonics feature conventional lifetimes with a weak m dependence. The long-time dynamics, governed by these modes, occurs at “non-Fermi-liquid” timescales, taking values as large as τ∼T{sub F}{sup 3}∕T{sup 4}. The hierarchy of timescales, short and long, leads to unusual long-time memory effects, defining an intriguing transport regime that lies between the conventional ballistic and hydrodynamic regimes.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2022

Experimental and computational studies of the kinetics of the reaction of hydrogen peroxide with the amidogen radical

In this work, the pulsed-laser photolysis/laser-induced fluorescence method is used to study the kinetics of the reaction of NH 2 with H 2 O 2 to yield a second-order rate constant of (2.42 ± 0.55) × 10 –14 cm 3 molecule –1 s –1 at 412 K in 10–22 mbar of Ar bath gas. There are no prior measurements for comparison. To check this value and enable reliable extrapolation to other temperatures, we also compute thermal rate constants for this process over the temperature range 298–3000 K via multi-structural canonical variational transition-state theory with small-curvature multidimensional tunneling (MS-CVT/SCT). The CVT/SCT rate constants are derived using a dual-level direct dynamics approach utilizing single-point CCSD(T)-F12b/cc-pVQZ-F12 energies—corrected for core-valence and scalar relativistic effects—and M06-2X/MG3S geometries, gradients, and Hessians—for all stationary and non-stationary points along the reaction path. The multistructural method with torsional anharmonicity, based on a coupled torsional potential, is then employed to calculate correction factors for the rate constants, accounting for the comprehensive effects of torsional anharmonicity on the kinetics of this reaction system. The final MS-CVT/SCT rate constants are found to be in good agreement with our measurements and can be expressed in modified Arrhenius form as 2.13 × 10 –15 (T/298 K) 4.02 exp(–513 K/T) cm 3 molecule –1 s –1 over the temperature range of 298–3000 K.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗