Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “disordered systems”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44
All sourcesNASA NTRSDOE OSTI
DOE OSTI2013

Design optimization of MR-compatible rotating anode x-ray tubes for stable operation

Purpose: Hybrid x-ray/MR systems can enhance the diagnosis and treatment of endovascular, cardiac, and neurologic disorders by using the complementary advantages of both modalities for image guidance during interventional procedures. Conventional rotating anode x-ray tubes fail near an MR imaging system, since MR fringe fields create eddy currents in the metal rotor which cause a reduction in the rotation speed of the x-ray tube motor. A new x-ray tube motor prototype has been designed and built to be operated close to a magnet. To ensure the stability and safety of the motor operation, dynamic characteristics must be analyzed to identify possible modes of mechanical failure. In this study a 3D finite element method (FEM) model was developed in order to explore possible modifications, and to optimize the motor design. The FEM provides a valuable tool that permits testing and evaluation using numerical simulation instead of building multiple prototypes.Methods: Two experimental approaches were used to measure resonance characteristics: the first obtained the angular speed curves of the x-ray tube motor employing an angle encoder; the second measured the power spectrum using a spectrum analyzer, in which the large amplitude of peaks indicates large vibrations. An estimate of the bearing stiffness is required to generate an accurate FEM model of motor operation. This stiffness depends on both the bearing geometry and adjacent structures (e.g., the number of balls, clearances, preload, etc.) in an assembly, and is therefore unknown. This parameter was set by matching the FEM results to measurements carried out with the anode attached to the motor, and verified by comparing FEM predictions and measurements with the anode removed. The validated FEM model was then used to sweep through design parameters [bearing stiffness (1×10{sup 5}–5×10{sup 7} N/m), shaft diameter (0.372–0.625 in.), rotor diameter (2.4–2.9 in.), and total length of motor (5.66–7.36 in.)] to increase the fundamental frequency past the operating range at 50 Hz.Results: The first large vibration during the prototype motor operation was obtained at 21.64±0.68 Hz in the power spectrum. An abrupt decrease in acceleration occurred at 21.5 Hz due to struggling against the resonance vibrations. A bearing stiffness of 1.2×10{sup 5} N/m in the FEM simulation was used to obtain a critical speed of 21.4 Hz providing 1.1% error. This bearing stiffness value and the 3D model were then confirmed by the experiments with the anode removed, demonstrating an agreement within 6.4% between simulation results and measurements. A calculated first critical frequency (fundamental frequency) of 68.5 Hz was obtained by increasing the bearing stiffness to 1×10{sup 7} N/m and increasing the shaft diameter by 68.0%. Reducing the number of bearings in the design permits decreasing the total length of the motor by 1.7 in., and results in a fundamental frequency of 68.3 Hz in concert with additional changes (shaft diameter of 0.625 in., rotor diameter of 2.4 in., and bearing stiffness of 1×10{sup 6} N/m).Conclusions: An FEM model of the x-ray tube motor has been implemented and experimentally validated. A fundamental frequency above the operational rotation speed can be achieved through modification of multiple design parameters, which allows the motor to operate stably and safely in the MR environment during the repeated acceleration/deceleration cycles required for an interventional procedure. The validated 3D FEM model can now be used to investigate trade-offs between generated torque, maximum speed, and motor inertia to further optimize motor design.

62 RADIOLOGY AND NUCLEAR MEDICINE↗
DOE OSTI2013

A complex between contactin-1 and the protein tyrosine phosphatase PTPRZ controls the development of oligodendrocyte precursor cells

The six members of the contactin (CNTN) family of neural cell adhesion molecules are involved in the formation and maintenance of the central nervous system (CNS) and have been linked to mental retardation and neuropsychiatric disorders such as autism. Five of the six CNTNs bind to the homologous receptor protein tyrosine phosphatases gamma (PTPRG) and zeta (PTPRZ), but the biological roles of these interactions remain unclear. We report here the cocrystal structure of the carbonic anhydrase-like domain of PTPRZ bound to tandem Ig repeats of CNTN1 and combine these structural data with binding assays to show that PTPRZ binds specifically to CNTN1 expressed at the surface of oligodendrocyte precursor cells. Furthermore, analyses of glial cell populations in wild-type and PTPRZ-deficient mice show that the binding of PTPRZ to CNTN1 expressed at the surface of oligodendrocyte precursor cells inhibits their proliferation and promotes their development into mature oligodendrocytes. Overall, these results implicate the PTPRZ/CNTN1 complex as a previously unknown modulator of oligodendrogenesis.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Reduction of bright exciton lifetimes by radiation-induced disorder

Quantum-radiative decay is a fundamental process in many optoelectronic systems such as laser diodes and solar cells. The bright exciton lifetime is a critical factor in determining the performance of these systems. Motivated by the ever-increasing need for laser systems in space and nuclear applications, we develop a many-particle approach to predict the radiative lifetime under harsh radiation environments. Here, using GaAs as a model system, we find that radiation-induced band tailing reduces the bright exciton lifetime. This result shows that the efficiency of radiative recombination, in addition to nonradiative recombination, can be affected by ionization radiation. Our approach enables a detailed understanding of the interplay between correlation, localization, and radiation that affect the performance of gain media.

36 MATERIALS SCIENCE↗
NASA NTRS1993

Studies of chondrogenesis in rotating systems

A great deal of energy has been exerted over the years researching methods for regenerating and repairing bone and cartilage. Several techniques, especially bone implants and grafts, show great promise for providing a remedy for many skeletal disorders and chondrodystrophies. The bioreactor (rotating-wall vessel, RWV) is a cell culture system that creates a nurturing environment conducive to cell aggregation. Chondrocyte cultures have been studied as implants for repair and replacement of damaged and missing bone and cartilage since 1965 [Chesterman and Smith, J Bone Joint Surg 50B:184-197, 1965]. The ability to use large, tissue-like cartilage aggregates grown in the RWV would be of great clinical significance in treating skeletal disorders. In addition, the RWV may provide a superior method for studying chondrogenesis and chondrogenic mutations. Because the RWV is also reported to simulate many of the conditions of microgravity it is a very useful ground-based tool for studying how cell systems will react to microgravity.

Non-NASA Center↗
NASA NTRS1991

Balance Function Disorders

Researchers at the Balance Function Laboratory and Clinic at the Minneapolis (MN) Neuroscience Institute on the Abbot Northwestern Hospital Campus are using a rotational chair (technically a "sinusoidal harmonic acceleration system") originally developed by NASA to investigate vestibular (inner ear) function in weightlessness to diagnose and treat patients with balance function disorders. Manufactured by ICS Medical Corporation, Schaumberg, IL, the chair system turns a patient and monitors his or her responses to rotational stimulation.

Source record↗
DOE OSTI2023

Beyond the Condon limit: Condensed phase optical spectra from atomistic simulations

While dark transitions made bright by molecular motions determine the optoelectronic properties of many materials, simulating such non-Condon effects in condensed phase spectroscopy remains a fundamental challenge. We derive a Gaussian theory to predict and analyze condensed phase optical spectra beyond the Condon limit. Our theory introduces novel quantities that encode how nuclear motions modulate the energy gap and transition dipole of electronic transitions in the form of spectral densities. By formulating the theory through a statistical framework of thermal averages and fluctuations, we circumvent the limitations of widely used microscopically harmonic theories, allowing us to tackle systems with generally anharmonic atomistic interactions and non-Condon fluctuations of arbitrary strength. We show how to calculate these spectral densities using first-principles simulations, capturing realistic molecular interactions and incorporating finite-temperature, disorder, and dynamical effects. Our theory accurately predicts the spectra of systems known to exhibit strong non-Condon effects (phenolate in various solvents) and reveals distinct mechanisms for electronic peak splitting: timescale separation of modes that tune non-Condon effects and spectral interference from correlated energy gap and transition dipole fluctuations. We further introduce analysis tools to identify how intramolecular vibrations, solute–solvent interactions, and environmental polarization effects impact dark transitions. Moreover, we prove an upper bound on the strength of cross correlated energy gap and transition dipole fluctuations, thereby elucidating a simple condition that a system must follow for our theory to accurately predict its spectrum.

Chemistry↗
NASA NTRS1973

Theory of disordered Heisenberg ferromagnets

A Green's function technique is used to calculate the magnetic properties of Heisenberg ferromagnets in which the exchange interactions deviate randomly in strength from the mean interaction. Systems of sc, bcc, and fcc topologies and of general spin values are treated. Disorder produces marked effects in the density of spin wave states, in the form of enhancement of the low-energy density and extension of the energy band to higher values. The spontaneous magnetization and the Curie temperature decrease with increasing disorder. The effects of disorder are shown to be more pronounced in the ferromagnetic than in the paramagnetic phase.

Stubbs, R. M.↗
DOE OSTI2023

Spin disorder in a stacking polytype of a layered magnet

Strongly correlated ground states and exotic quasiparticle excitations in low-dimensional systems are central research topics in the solid-state research community. The present work develops a layered material and explores the physical properties. Single crystals of 3⁢R–Na 2 ⁢MnTe⁢O 6 were synthesized via a flux method. Single-crystal x-ray diffraction and transmission electron microscopy reveal a crystal structure with ABC-type stacking and an R–3 space group, which establishes this material as a stacking polytype to previously reported 2⁢H–Na 2 ⁢MnTe⁢O 6 . Magnetic- and heat-capacity measurements demonstrate dominant antiferromagnetic interactions, the absence of long-range magnetic order down to 0.5 K, and field-dependent short-range magnetic correlations. A structural transition at ~23 K observed in dielectric measurements may be related to displacements of the Na positions. In conclusion, our results demonstrate that 3⁢R–Na 2 ⁢MnTe⁢O 6 displays low-dimensional magnetism, disordered structure and spins, and the system displays a rich structure variety.

36 MATERIALS SCIENCE↗
DOE OSTI2015

Discovering the Role of Grain Boundary Complexions in Materials

Grain boundaries are inherently an area of disorder in polycrystalline materials which define the transport and various other material properties. The relationship between the interfacial chemistry, structure and the material properties is not well understood. Among the various taxonomies for grain boundaries, Grain Boundary Complexion is a relatively new conceptual scheme that relates the structure and kinetic properties of grain boundaries. In this classification scheme, grain boundaries are considered to be distinct three dimensional (the thickness being considerably smaller as compared to the other two dimensions but nonetheless discernible) equilibrium thermodynamic phases abutted between two crystalline phases. The stability and structure of these interfacial phases are dictated by various thermodynamic variables such as temperature, stress (pressure), interfacial chemistry (chemical potential) and most importantly by the energies of the adjoining crystal surfaces. These phases are only stable within the constraint of the adjoining grains. Although these interfacial phases are not stable in bulk form, they can transform from one complexion to another as a function of various thermodynamic variables analogous to the behavior of bulk phases. Examples of different complexions have been reported in various publications. However, a systematic investigation exploring the existence of grain boundary complexions in material systems other than alumina remains to be done. Although the role of interfacial chemistry on grain boundary complexions in alumina has been addressed, a clear understanding of the underlying thermodynamics governing complexion formation is lacking. Finally, the effects of grain boundary complexions in bulk material properties are widely unknown. Factors above urge a thorough exploration of grain boundary complexions in a range of different materials systems The purpose of the current program is to verify the existence of grain boundary complexion in a range of materials systems, and to characterize their structures, range of stability and selected physical properties. First, an Au-based bilayer interfacial phase was discovered at a bicrystal boundary in the Si-Au system. This bilayer transitioned abruptly to an intrinsic (“clean”) grain boundary phase, suggesting first-order phase behavior. This study represents the discovery of grain boundary complexions in a completely new system, i.e., a semiconductor-metal system, giving further support to the expectation that grain boundary complexions are a general phenomenon not limited to any particular class of materials. The TiO 2 -CuO system exhibited four grain boundary interfacial phases: a monolayer, disordered bilayer, disordered trilayer, and non-wetting nanoscale amorphous drop (which likely resulted from dewetting of a nanoscale IGF). SiO 2 contamination was discovered in the TiO 2 -CuO samples, and we hypothesize that this impurity may have caused an “order-disorder” transition to occur. In other words, we expect that pure TiO 2 -CuO may have a higher tendency to exhibit ordered bilayer and trilayer complexions, which may also exhibit a well-defined order-disorder transition temperature. In this effort we have also identified unique complexion transitions in yttria and strontium titanate.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Structural transitions and hysteresis in clump- and stripe-forming systems under dynamic compression

In using numerical simulations, we study the dynamical evolution of particles interacting via competing long-range repulsion and short-range attraction in two dimensions. The particles are compressed using a time-dependent quasi-one dimensional trough potential that controls the local density, causing the system to undergo a series of structural phase transitions from a low density clump lattice to stripes, voids, and a high density uniform state. The compression proceeds via slow elastic motion that is interrupted with avalanche-like bursts of activity as the system collapses to progressively higher densities via plastic rearrangements. The plastic events vary in magnitude from small rearrangements of particles, including the formation of quadrupole-like defects, to large-scale vorticity and structural phase transitions. In the dense uniform phase, the system compresses through row reduction transitions mediated by a disorder-order process. We also characterize the rearrangement events by measuring changes in the potential energy, the fraction of sixfold coordinated particles, the local density, and the velocity distribution. At high confinements, we find power law scaling of the velocity distribution during row reduction transitions. We observe hysteresis under a reversal of the compression when relatively few plastic rearrangements occur. The decompressing system exhibits distinct phase morphologies, and the phase transitions occur at lower compression forces as the system expands compared to when it is compressed.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2019

Ion diffusion across a disorder-to-order phase transition in a poly(ethylene oxide)- b -poly(silsesquioxane) block copolymer electrolyte

Nanostructured block copolymer electrolytes composed of organic and inorganic moieties have the potential to enable solid-state batteries. Practical uses of these materials, however, require an understanding of the microscopic and macroscopic ion transport properties across the microphase-separated systems. The self-diffusion of salt ions across a disorder-lamellar phase transition in a nanostructured poly(ethylene oxide)-b-poly(silsesquioxane) copolymer was studied using pulsed-field gradient NMR (PFG-NMR) and changes in the morphology were studied using small-angle X-ray scattering. The diffusion of the salt is isotropic when the polymer electrolyte is disordered and locally anisotropic when the polymer is microphase separated. The difference between the diffusion coefficient parallel to the lamellae, D ∥ , and the diffusion coefficient perpendicular to the lamellae, D ⊥ , measured using PFG-NMR, increases with increasing segregation strength. Finally, the anisotropy of diffusion parallels changes in the morphology measured by small-angle X-ray scattering.

42 ENGINEERING↗
DOE OSTI2025

MS25: Materials Science-Focused Benchmark Data Set for Machine Learning Interatomic Potentials

Here, we present MS25, a benchmark data set for evaluating machine learning interatomic potentials (MLIPs) across diverse materials-relevant systems including MgO surfaces, liquid water, zeolites, a catalytic Pt surface reaction, high-entropy alloys (HEAs), and disordered Zr-oxides. Five MLIP architectures (MACE, NequIP, Allegro, MTP, and Torch-ANI) are trained and tested, focusing not only on traditional metrics (energies, forces, and stresses) but also explicitly validating derived physical observables such as lattice constants, volumes, and reaction barriers. We find that most models reach comparable accuracy on standard error metrics across the simple systems, although equivariant MLIPs offer 1.5–2× improvements over nonequivariant MLIPs in energy and force error for structurally complex or compositionally disordered environments such as HEAs and Zr–O systems. Our analysis highlights that low errors in energy and force predictions do not guarantee reliable observables, emphasizing the necessity of explicit validation. We demonstrate limitations in cross-framework transferability, as models trained on one zeolite framework (CHA) fail to reliably generalize to predictions of structurally distinct frameworks (e.g., MFI). Size-extensive tests show some dependence on system size for MgO, resulting from forced periodicity. The HEA and Zr–O data sets are identified as challenging tests for future benchmarks and MLIP model architecture developments as they show significant differentiation in error between MLIP architectures and are still relatively difficult at 1000 training images. Moving forward, we recommend that benchmarking efforts shift their focus from marginal accuracy improvements in energy and force errors toward identifying and understanding model failure modes, rigorously assessing transferability, and evaluating how their errors affect observable predictions. For researchers looking to choose an MLIP architecture, we suggest selecting equivariant MLIP architectures if the complexity of the system is a challenge. For simple materials problems, auxiliary features such as integration with molecular dynamics engines, trade-offs between computational data set generation cost vs MLIP inference speed, and framework integration may play a more important decision factor than small differences in error metrics that are unlikely to matter for production-level research.

chemical structure↗
DOE OSTI2016

Maternal exposure to carbamazepine at environmental concentrations can cross intestinal and placental barriers

Psychoactive pharmaceuticals have been found as teratogens at clinical dosage during pregnancy. These pharmaceuticals have also been detected in minute (ppb) concentrations in drinking water in the US, and are environmental contaminants that may be complicit in triggering neurological disorders in genetically susceptible individuals. Previous studies have determined that psychoactive pharmaceuticals (fluoxetine, venlafaxine and carbamazepine) at environmentally relevant concentrations enriched sets of genes regulating development and function of the nervous system in fathead minnows. Altered gene sets were also associated with potential neurological disorders, including autism spectrum disorders (ASD). Subsequent in vitro studies indicated that psychoactive pharmaceuticals altered ASD-associated synaptic protein expression and gene expression in human neuronal cells. However, it is unknown if environmentally relevant concentrations of these pharmaceuticals are able to cross biological barriers from mother to fetus, thus potentially posing risks to nervous system development. The main objective of this study was to test whether psychoactive pharmaceuticals (fluoxetine, venlafaxine, and carbamazepine) administered through the drinking water at environmental concentrations to pregnant mice could reach the brain of the developing embryo by crossing intestinal and placental barriers. We addressed this question by adding {sup 2}H-isotope labeled pharmaceuticals to the drinking water of female mice for 20 days (10 pre-and 10 post–conception days), and quantifying {sup 2}H-isotope enrichment signals in the dam liver and brain of developing embryos using isotope ratio mass spectrometry. Significant levels of {sup 2}H enrichment was detected in the brain of embryos and livers of carbamazepine-treated mice but not in those of control dams, or for fluoxetine or venlafaxine application. These results provide the first evidence that carbamazepine in drinking water and at typical environmental concentrations is transmitted from mother to embryo. Our results, combined with previous evidence that carbamazepine may be associated with ASD in infants, warrant the closer examination of psychoactive pharmaceuticals in drinking water and their potential association with neurodevelopmental disorders.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2024

Polariton creation in coupled cavity arrays with spectrally disordered emitters

Abstract Integrated photonics has been a promising platform for analog quantum simulation of condensed matter phenomena in strongly correlated systems. To that end, we explore the implementation of all-photonic quantum simulators in coupled cavity arrays with integrated ensembles of spectrally disordered emitters. Our model is reflective of color center ensembles integrated into photonic crystal cavity arrays. Using the Quantum Master equation and the Effective Hamiltonian approaches, we study energy band formation and wavefunction properties in the open quantum Tavis–Cummings–Hubbard framework. We find conditions for polariton creation and (de)localization under experimentally relevant values of disorder in emitter frequencies, cavity resonance frequencies, and emitter-cavity coupling rates. To quantify these properties, we introduce two metrics, the polaritonic and nodal participation ratios, that characterize the light-matter hybridization and the node delocalization of the wavefunction, respectively. These new metrics combined with the Effective Hamiltonian approach prove to be a powerful toolbox for cavity quantum electrodynamical engineering of solid-state systems.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2025

Sharp spectroscopic fingerprints of disorder in an incompressible magnetic state

Disorder significantly impacts the electronic properties of conducting quantum materials by inducing electron localization and thus altering the local density of states and electric transport. In insulating quantum magnetic materials, the effects of disorder are less understood and can drastically impact fluctuating spin states like quantum spin liquids. In the absence of transport tools, disorder is typically characterized using chemical methods or by semi-classical modeling of spin dynamics. This requires high magnetic fields that may not always be accessible. Here, we show that magnetization plateaus—incompressible states found in many quantum magnets—provide an exquisite platform to uncover small amounts of disorder, regardless of the origin of the plateau. Using optical magneto-spectroscopy on the Ising-Heisenberg triangular-lattice antiferromagnet K 2 Co(SeO 3 ) 2 exhibiting a 1/3 magnetization plateau, we identify sharp spectroscopic lines, the fine structure of which serves as a hallmark signature of disorder. Through analytical and numerical modeling, we show that these fingerprints not only enable us to quantify minute amounts of disorder but also reveal its nature—as dilute vacancies. Remarkably, this model explains all details of the thermomagnetic response of our system, including the existence of multiple plateaus. Our findings provide a new approach to identifying disorder in quantum magnets.

Infrared spectroscopy↗
DOE OSTI2022

Hydrodynamic electron transport in graphene Hall-bar devices

Here we consider hydrodynamic electron transport in the Hall-bar geometry. The theory is developed for systems with non-Galilean-invariant electron liquids. We show that inhomogeneity of the electron density induced by long-range disorder and gating leads to mixing between the hydrodynamic transport mode and transport relative to the electron liquid. For graphene systems near charge neutrality, these effects lead to strong coupling of the hydrodynamic flow to charge transport. As a result, the effective electrical conductivity of the system may significantly exceed the intrinsic conductivity of the electron liquid. We obtain analytic expressions for the thermoelectric transport coefficients of the system as a function of density in the full crossover region between clean and disorder-dominated regimes.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Compositional dependence of disordered structures in Na½Bi½TiO3-BaTiO3 solid solutions

Highlights: • Diffuse X-ray scattering collected from 4 compositions of Na{sub ½}Bi{sub ½}TiO{sub 3}-x%BaTiO{sub 3}. • Oxygen octahedral tilts, atomic displacements and modulations existed. • All local disordered structures evolved across the morphotropic phase boundary. - Abstract: Disordered structures contribute to the relaxor ferroelectric properties of the lead-free system Na{sub ½}Bi{sub ½}TiO{sub 3}-(x)%BaTiO{sub 3}. Such structures are difficult to characterize with conventional structural analysis techniques. Here, diffuse X-ray scattering was used to analyze the disordered structures from four single-crystals of Na{sub ½}Bi{sub ½}TiO{sub 3}-(x)%BaTiO{sub 3}, with compositions of (x)% = 0%, 4%, 9% and 17%. Such a range of compositions allowed a distinction between the structures that occur across the morphotropic phase boundary, where enhanced electro-mechanical properties have been reported. Throughout the compositional range, the resulting diffuse scattering showed the modification of correlated atomic displacements, transformation of planar defects in the oxygen octahedral tilt-systems, and the presence of modulations of approximately 10 unit cells. The results reported here demonstrate an evolution of the short-range structures across the morphotropic phase boundary that may underpin the electro-mechanical properties of Na{sub ½}Bi{sub ½}TiO{sub 3}-(x)%BaTiO{sub 3}. This information will ultimately assist in tailoring disordered structures for next-generation piezoelectric materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

A Quenched Disorder in the Quantum-Critical Superconductor CeCoIn 5

Emergent inhomogeneous electronic phases in metallic quantum systems are crucial for understanding high- T c superconductivity and other novel quantum states. In particular, spin droplets introduced by nonmagnetic dopants in quantum-critical superconductors (QCSs) can lead to a novel magnetic state in superconducting phases. However, the role of disorders caused by nonmagnetic dopants in quantum-critical regimes and their precise relation with superconductivity remain unclear. Here, the systematic evolution of a strong correlation between superconductive intertwined electronic phases and antiferromagnetism in Cd-doped CeCoIn 5 is presented by measuring current–voltage characteristics under an external pressure. In the low-pressure coexisting regime where antiferromagnetic (AFM) and superconducting (SC) orders coexist, the critical current ( I c ) is gradually suppressed by the increasing magnetic field, as in conventional type-II superconductors. At pressures higher than the critical pressure where the AFM order disappears, I c remarkably shows a sudden spike near the irreversible magnetic field. In addition, at high pressures far from the critical pressure point, the peak effect is not suppressed, but remains robust over the whole superconducting region. These results indicate that magnetic islands are protected around dopant sites despite being suppressed by the increasingly correlated effects under pressure, providing a new perspective on the role of quenched disorders in QCSs.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗