Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “depth”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Thermal modeling of three lakes within the continuous permafrost zone in Alaska using the LAKE 2.0 model

Abstract. Lakes in the Arctic are important reservoirs of heat with much lower albedo in summer and greater absorption of solar radiation than surrounding tundra vegetation. In the winter, lakes that do not freeze to their bed have a mean annual bed temperature >0 ∘C in an otherwise frozen landscape. Under climate warming scenarios, we expect Arctic lakes to accelerate thawing of underlying permafrost due to warming water temperatures in the summer and winter. Previous studies of Arctic lakes have focused on ice cover and thickness, the ice decay process, catchment hydrology, lake water balance, and eddy covariance measurements, but little work has been done in the Arctic to model lake heat balance. We applied the LAKE 2.0 model to simulate water temperatures in three Arctic lakes in northern Alaska over several years and tested the sensitivity of the model to several perturbations of input meteorological variables (precipitation, shortwave radiation, and air temperature) and several model parameters (water vertical resolution, sediment vertical resolution, depth of soil column, and temporal resolution). The LAKE 2.0 model is a one-dimensional model that explicitly solves vertical profiles of water state variables on a grid. We used a combination of meteorological data from local and remote weather stations, as well as data derived from remote sensing, to drive the model. We validated modeled water temperatures with data of observed lake water temperatures at several depths over several years for each lake. Our validation of the LAKE 2.0 model is a necessary step toward modeling changes in Arctic lake ice regimes, lake heat balance, and thermal interactions with permafrost. The sensitivity analysis shows us that lake water temperature is not highly sensitive to small changes in air temperature or precipitation, while changes in shortwave radiation and large changes in precipitation produced larger effects. Snow depth and lake ice strongly affect water temperatures during the frozen season, which dominates the annual thermal regime of Arctic lakes. These findings suggest that reductions in lake ice thickness and duration could lead to more heat storage by lakes and enhanced permafrost degradation.

Clark, Jason A. (ORCID:0000000248105261)↗
DOE OSTI2021

Assimilation of citizen science data in snowpack modeling using a new snow data set: Community Snow Observations

A physically based snowpack evolution and redistribution model was used to test the effectiveness of assimilating crowd-sourced snow depth measurements collected by citizen scientists. The Community Snow Observations project gathers, stores, and distributes measurements of snow depth recorded by recreational users and snow professionals in high mountain environments. These citizen science measurements are valuable since they come from terrain that is relatively undersampled and can offer in situ snow information in locations where snow information is sparse or nonexistent. The present study investigates (1) the improvements to model performance when citizen science measurements are assimilated, and (2) the number of measurements necessary to obtain those improvements. Model performance is assessed by comparing time series of observed (snow pillow) and modeled snow water equivalent values, by comparing spatially distributed maps of observed (remotely sensed) and modeled snow depth, and by comparing fieldwork results from within the study area. The results demonstrate that few citizen science measurements are needed to obtain improvements in model performance, and these improvements are found in 62 % to 78 % of the ensemble simulations, depending on the model year. Model estimations of total water volume from a subregion of the study area also demonstrate improvements in accuracy after CSO measurements have been assimilated. These results suggest that even modest measurement efforts by citizen scientists have the potential to improve efforts to model snowpack processes in high mountain environments, with implications for water resource management and process-based snow modeling.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Non-linear hydrologic organization

We revisit three variants of the well-known Stommel diagrams that have been used to summarize knowledge of characteristic scales in time and space of some important hydrologic phenomena and modified these diagrams focusing on spatiotemporal scaling analyses of the underlying hydrologic processes. In the present paper we focus on soil formation, vegetation growth, and drainage network organization. We use existing scaling relationships for vegetation growth and soil formation, both of which refer to the same fundamental length and timescales defining flow rates at the pore scale but different powers of the power law relating time and space. The principle of a hierarchical organization of optimal subsurface flow paths could underlie both root lateral spread (RLS) of vegetation and drainage basin organization. To assess the applicability of scaling, and to extend the Stommel diagrams, data for soil depth, vegetation root lateral spread, and drainage basin length have been accessed. The new data considered here include timescales out to 150 Myr that correspond to depths of up to 240 m and horizontal length scales up to 6400 km and probe the limits of drainage basin development in time, depth, and horizontal extent.

58 GEOSCIENCES↗
DOE OSTI2025

Characterization of Li in the Salton Sea Geothermal Field

Abstract The behavior of lithium during geothermal brine and host-rock interactions in the Salton Sea geothermal field is underconstrained. The lithium brine reservoir inventory is between 4 and 18 million metric tons of lithium carbonate equivalent, with an even larger amount present within the reservoir rock mineral phases. Here, we present bulk-rock and brine Li concentration and δ7Li, and in situ Li concentrations of minerals from the California State 2-14 scientific drill core and commercial wells in the Salton Sea geothermal field to identify the mineral hosts of Li and constrain Li behavior during brine-rock interactions. Lithium contents are highest in chlorite (270–580 ppm, ~2,358 m), which encases pyrite, indicating that Li is fixed from the brine into the host rocks during hydrothermal alteration. Lithium abundances in chlorite decrease with depth (70–100 ppm, ~2,882 m), as does whole-rock Li content, whereas whole-rock δ7Li increases (δ7Li = 2.0–4.3‰, ~2,485-m depth; δ7Li = 4.3–7.9‰ from ~2,819 to ~2,882 m). This change in behavior of Li at ~2,500 m suggests temperature dependent partitioning of Li in chlorite; Li becomes more incompatible in chlorite at depths >~2,500 m, corresponding to ~325°C in the reservoir. The brines have δ7Li = 3.7 to 4.7‰ and calculated isotopic fractionation factors between the brine and the host rock agree with a change in Li behavior at ~325°C. Simple closed-system batch modeling does not describe the geothermal system, suggesting open-system behavior of Li within the Salton Sea geothermal field.

Humphreys, J↗
DOE OSTI2020

Iron and Phosphorus Geochemistry in High-Centered and Low-Centered Polygon Soils from the Barrow Environmental Observatory, Utqiagvik, Alaska, 2015

This dataset provides chemical characterization of soil cores obtained in triplicate from center and trough positions of a high-centered polygon and center, ridge, and trough positions of a low-centered polygon in the NGEE Arctic research area within the Barrow Environmental Observatory, Utqiagvik, Alaska. Photographs of the 15 collected cores are provided. Cores were collected to thaw depth in early October 2015 and subsequently divided into subsamples for analysis, which included bulk soil horizons (organic or mineral) and finer scale depth increments (minimum 4 cm thickness per increment). Bulk horizons and depth increments were characterized using sequential chemical extractions for Fe and P and with Fe K-edge x-ray absorption spectroscopy. Additional soil parameters such as loss-on-ignition, gravimetric water content, and carbon and nitrogen concentrations were also quantified for bulk horizons. This dataset includes four csv files, one pdf user guide, and one zip folder of *.jpg photos.The Next-Generation Ecosystem Experiments: Arctic (NGEE Arctic), was a research effort to reduce uncertainty in Earth System Models by developing a predictive understanding of carbon-rich Arctic ecosystems and feedbacks to climate. NGEE Arctic was supported by the Department of Energy's Office of Biological and Environmental Research.The NGEE Arctic project had two field research sites: 1) located within the Arctic polygonal tundra coastal region on the Barrow Environmental Observatory (BEO) and the North Slope near Utqiagvik (Barrow), Alaska and 2) multiple areas on the discontinuous permafrost region of the Seward Peninsula north of Nome, Alaska.Through observations, experiments, and synthesis with existing datasets, NGEE Arctic provided an enhanced knowledge base for multi-scale modeling and contributed to improved process representation at global pan-Arctic scales within the Department of Energy's Earth system Model (the Energy Exascale Earth System Model, or E3SM), and specifically within the E3SM Land Model component (ELM).

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Low flow characteristics for regulated and unregulated streams in North Carolina and prediction using climate signals

In this work, low flow statistics of regulated and unregulated streams in the state of North Carolina were updated with streamflow data through 2019. About 22% of the streams considered show a significant downward trend, but considerable low-frequency variability confounding trends. The relationship between regional index time series of groundwater-depth low flow and the Atlantic Multidecadal Oscillation (AMO) was examined to determine whether low-frequency climate modes can account for the long-term pattern in low flows. Consequently, a significant correlation was found between AMO and groundwater-depth low flow, such that positive AMO is associated with lower groundwater-depth low flow and vice versa, particularly for the Piedmont region. Predictive equations for annual low flows at the ecoregion level shows that springtime average streamflow and AMO were selected as the primary predictors of low flow for coastal and Piedmont regions, whereas springtime average streamflow and the November–December–January average Oceanic Niño Index were used as the primary predictors for the mountain region. The relative root mean square error (RMSE) of the disaggregated predictions to US Geologic Survey gauge locations was <23% at 79% of the stations, between 24% and 43% at 10% of the stations, and greater than 44% at 1% of the stations. The remaining 10% of stations showed large RMSEs. This latter percentage is characterized by smaller drainage basins and intermittent flows, suggesting the prediction models are not applicable to drainage basins smaller than roughly 20 square km and intermittent streams.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Xenon compatibility in magmatic processes: Hadean to current contexts

Xenon (Xe) behaviour in petrological processes, albeit essential to constrain mantle ingassing and degassing models, is elusive due to its volatile nature, and lack of direct investigation at the pressures (P) and temperatures (T) relevant to magma formation and crystallisation at depth. Xenon stands out amongst noble gases due to its unique reactivity with silicates of the lower crust and upper mantle, which could at least partially explain that published mineral/melt partitioning coefficients span up to six orders of magnitude. We report partition coefficients of Xe using in situ X-ray fluorescence at high P and T, and mass spectrometry analyses. Xenon is found to be moderately incompatible in anorthite-clinopyroxene mix in equilibrium with basalt (partition coefficient value of 0.16 ± 0.06), and compatible in olivine in equilibrium with basalt (partition coefficients in the range 88 ± 22 to 302 ± 46). While Xe is, thus, concentrated in basaltic melts coexisting with crystallising pyroxenes and feldspars, it is strongly retained in olivine at depth. Consequently, Xe originally contained in solid Earth has been preferentially retained at depth throughout Earth’s history, from the magma ocean stages to present day partial mantle melting processes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Algae cultivation systems and methods with reduced energy loss

An open raceway algae cultivation system includes a channel configured to contain an algae cultivation fluid. The channel includes a contraction zone having a width and a depth. A pump is configured to circulate the algae cultivation fluid in the channel. A width of the contraction zone decreases leading into the entrance of the pump and a depth of the contraction zone is greater than a depth of at least a portion of the channel located outside of the contraction zone.

42 ENGINEERING↗
DOE OSTI2020

Asymmetric articles with a porous substrate and a polymeric coating extending into the substrate and methods of making the same

Asymmetric articles are described including a porous substrate with two opposing major surfaces and a porous structure extending between the surfaces, and a polymeric coating on one of the major surfaces and extending into the porous structure to a depth of the porous structure. Methods for making an asymmetric composite article are also provided, including providing a porous substrate, treating the porous substrate with a plasma treatment or a corona treatment from one major surface to a depth of the porous structure between the two major surfaces. The method further includes applying a coating solution to the treated porous substrate and drying the coating solution to form a composite asymmetric composite article having a polymeric coating on one major surface and extending into the porous structure to the depth of the treated porous structure.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Geology and Hydrothermal Alteration of the Raft River Geothermal System, Idaho

The Raft River geothermal system is located in southern Idaho, near the Utah-Idaho state boarder in the Raft River Valley. The field, which is owned and operated by U.S. Geothermal, has been selected as an EGS demonstration site by the U. S. Department of Energy. This paper summarizes ongoing geologic and petrologic investigations being conducted in support of this project. The reservoir is developed in fractured Proterozoic schist and quartzite, and Archean quartz monzonite cut by younger diabase intrusions. The basement complex was deformed during the mid Tertiary and covered by approximately 5000 ft of late Tertiary sedimentary and volcanic deposits. Listric normal faults of Cenozoic age disrupt the Tertiary deposits but do not offset the basement rocks. RRG-9, the target well, was drilled southwest of the main well field to a measured depth (MD) of 6089 ft. The well is deviated to the west and cased to a depth of 2316 ft MD. It penetrated the Proterozoic reservoir rocks at a depth of 5286 ft MD and encountered a maximum temperature of 139 degrees C. Bottomhole temperatures in other deep wells range from 133 to 149 degrees C. X-ray diffraction and thin section analyses are being conducted on samples from 5 deep wells, RRG- 1, 2, 3, 7 and 9, to determine the characteristics of the rock types and hydrothermal alteration within the geothermal system. Thin section analyses of samples from RRG-9 document the presence of strong alteration and brecciation at the contact between the Tertiary and basement complex. The Tertiary rocks consist of ash-flow tuffs, lava flows, tuffaceous siltstone, greywacke, and sandstone. No core is available from RRG-9 but core was obtained from RRG-3C. The sample is a brecciated and altered siltstone from the base of the Tertiary sequence and is similar to rocks at the base of the Tertiary deposits in RRG-9. Here, the results of thermal and quasi-static mechanical property measurements that were conducted on the core sample are presented.

Jones, Clay↗
DOE OSTI2021

Accurate surface estimation from high-resolution 3D microwave images

Active millimeter and microwave imaging techniques can be used to create a high-resolution 3D image volume of a target’s reflectivity. Millimeter-wave imaging is commonly used for personnel security screening and numerous other applications. Backprojection based image reconstruction techniques form a 3D complex-valued volume. The complex-valued volume is commonly reduced to a real-valued volume by taking the magnitude. For anomaly detection and cross image registration of an object it is beneficial to generate an accurate representation of an object’s surface. Extracting a smooth and accurate surface from a magnitude only image is challenging. One difficulty is the magnitude image has limited resolution in the depth direction which normally limits precision to a moderate fraction of the depth resolution. Another difficulty is that the magnitude of the image depends heavily on the geometry and orientation of the object being imaged. The phase information in a complex-valued image volume provides a means to decouple the magnitude of the image from the geometry of an object and provide precision much finer than the depth resolution would indicate. This enables the generation of a smooth and accurate point cloud representation of the surface of an imaged object. A method to extract a point cloud from the phase information in a 3D complex-valued millimeter-wave image volume is developed and results with simulated and experimental data are presented.

Clark, Richard T.↗
DOE OSTI2021

Field Experiments and Model Validation: The EGS Collab Project

Implementing enhanced geothermal systems (EGS) will require improvements in understanding stimulation of crystalline rock to create appropriate flow pathways, and the ability to effectively simulate both the stimulation and the flow and transport processes in the resulting fracture network. The US Department of Energy (DOE) is addressing these and other challenges at multiple scales. The EGS Collab project, addressed here, is performing tests and modeling at the 10 m scale. The FORGE project is performing tests at the full reservoir scale. The EGS Collab team created an underground testbed at the Sanford Underground Research Facility (SURF) in Lead, South Dakota, at a depth of approximately 1.5 km to examine hydraulic fracturing (Experiment 1). We are currently building a second testbed at SURF at a depth of about 1.25 km aimed at investigating shear stimulation (Experiment 2). In Experiment 1, we drilled eight boreholes in a well-characterized phyllite and installed geophysical sensors in six of them to create a well-instrumented testbed to allow careful monitoring of stimulation events and flow tests. Numerical simulation was used to answer key experimental design questions, to forecast fracture propagation trajectories and extents, and to analyze and evaluate results both in near-real-time and in detailed process studies. Stimulations performed in this testbed allowed quantification of processes occurring during stimulation and the examination of dynamic flow occurrences. Long-term ambient temperature and chilled water flow tests were performed in addition to many tracer tests to examine system behavior. Our second testbed, targeted at shear stimulation, is currently being built at the SURF Facility at a depth of about 1.25 km in amphibolite under a different set of stress and fracture conditions than Experiment 1.

artificial intelligence↗
DOE OSTI2020

Feedback on Forty-year Long Clean-up Operations of a Contaminated Soil for Environmental Purpose - 20026

One of the CEA facilities in France is the place of miscellaneous mapping and clean-up operations since the 1980's. The final purpose of the conducted work deals with the environmental remediation of the building. In France, the absence of a regulatory framework for the management of sites polluted by radioactive substances, especially as the lack of release thresholds, has led to develop different approaches of soil radiological characterization. The geostatistical approach is part of them. Preliminary investigations are an unavoidable step prior to clearance and remediation. First, historical analysis enables to define site perimeters to investigate as well as to precisely locate expected contaminated parts. For radioactive pollutants, the media (water, soil, air) and transfer routes participate in the definition of the investigation perimeter and thus also need to be identified through a geological study. At the same time, functional analysis leads to choose the best measurement means which could provide useful information when combined with visual inspection. An equipment well adapted to easy-to-measure radionuclides as gamma emitters, such as gamma probe or on-site gamma spectrometry, is usually selected as a non-destructive assay. Coupled with spatial positions, processed on-site radiological data can be mapped. Data processing consists in mapping and kriging before a geostatistical analysis in order to identify the zones of interest to be targeted. Selected zones are not only linked to high level count rates but also to low level ones so that a pollution-free reference is known in the area. This data processing also enables to categorize waste types according to their origin and contamination levels. An expected volume of different waste then follows as well as the waste characterization equipments. In-depth investigations, e.g. core drillings and samplings, naturally ensue to aim at remediation optimization through the assessment of environmental impact. After clean-up operations, non-destructive assays as well as destructive samplings enable to check the effective clearance. Following this methodology in the present remediation work, results of the first non-destructive assay campaign highlighted a long-lived transuranic radionuclides contamination in the concrete flagstone. Successive non-destructive assays were then performed in the defined zones of interest. Count rates measured with a surface probe were first mapped. The best localization of destructive assays, i.e. core drillings at a 1 meter depth, came from this surface mapping followed by a geostatistical analysis. The concrete flagstone was totally removed. Then, the depth of soil to remove under the flagstone was optimized from the results of radiological activities measured in core drillings samples. A new surface mapping was then drawn after this partial soil excavation. The sand and demolition rubble samples, homogeneously constituted from the flagstone fragments, were analyzed by gamma spectrometry. Meanwhile, waste drums and other containers were also measured by gamma spectrometry and passive neutron measurement devices. All these results have brought miscellaneous pieces of information. In this context, major issues appear in terms of physical constraints such as the premises tininess as well as of soil sampling techniques and in terms of measurement performances assessment and the representativeness of homogeneous samples. The choice of radiological soil and waste characterization devices is described in the light of enhanced performances by keeping in mind radiation protection requirements and a willing to always optimize waste categories (very low level waste) and volume. The improvement of the characterization methods appears through this forty-year long work while sharing the feedback of encountered difficulties. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2025

Comparative Study of Enhanced Geothermal System Supply Curves Across CONUS from Two Temperature Models Using the Renewable Energy Potential Model (reV)

Enhanced geothermal systems (EGS) have had recent breakthroughs within the geothermal sector. These breakthroughs are reflected in the National Renewable Energy Laboratory (NREL) 2024 Annual Technology Baseline and will result in updated EGS supply curves (i.e., the available resource capacity relative to cost). Our research uses NREL's Renewable Energy Potential (reV) model to compare EGS supply curves across the conterminous United States (CONUS) for two different temperature models: the Stanford temperature model (STM) and the Southern Methodist University temperature model (SMU). The reV model provides the levelized cost of energy (LCOE) at a consistent resolution across CONUS, taking into consideration transmission costs and constraints as well as technical exclusions pertaining to sensitive cultural, ecological, or infrastructure locations. In addition to a countrywide analysis of both models, we also conducted a regional analysis of Texas. We observed the STM had, on average, lower temperatures across different depths, resulting in slightly higher mean and median LCOEs as compared to the SMU temperature model at the same depths. In the regional analysis for Texas, however, when we compared only the common points between the two temperature models, the STM had lower median and mean LCOEs compared to SMU due to higher temperatures at depths greater than 5 km.

enhanced geothermal systems↗
DOE OSTI2026

Infrared-enhanced Photometric Redshifts for the Dark Energy Survey Y6 Gold catalogue

The Dark Energy Survey (DES) provides optical data across 5000 square degrees of the southern sky, enabling a broad range of extragalactic and cosmological studies. Combining DES data with infrared surveys offers the opportunity to improve its photometric redshift (photo-z) estimates. We aim to investigate improvements in photometric redshift estimation achieved by combining DES optical data with infrared measurements from the VISTA Hemisphere Survey (VHS) and the Wide-field Infrared Survey Explorer (WISE), and release an updated version of the catalogue. We performed a positional sky cross-match between the DES Y6 Gold catalogue matched to a spectroscopic dataset, the 2013 AllWISE Data Release, and VHS Data Release 5, in order to test these improvements using the Directional Neighbourhood Fitting (DNF) algorithm (Y6 Gold catalogue reference estimator). We additionally matched it to the unWISE catalogue to verify the performance against this deeper dataset. Adding infrared data reduces all the metrics (scatter, bias and outlier fraction) in photo-z estimates, particularly at higher redshifts in comparison with only using optical data from DES. The obtained results are globally better for the DES+WISE sample, with improvements that are statistically significant. On the other hand, the addition of the VHS bands to available depth is only marginal. The combined use of DES and WISE W1 and W2 data improves the photometric redshift metrics analysed here. The addition of VHS data at the DES and VHS depths explored here does not provide any further improvement at z less than 1.5, indicating that, under these constraints, WISE data may already capture the key infrared features and depth needed for accurate photo-z estimation. In addition, low signal-to-noise (less than 10) infrared data does not contribute to any improvement beyond the DES optical dataset.

Puebla, M. M. [Madrid U.; Madrid, CIEMAT]↗
DOE OSTI2026

A Deep Look at the Ultra-Faint Milky Way Satellite Virgo III with Rubin Observatory Data Preview 2

We analyze the ultra-faint Milky Way satellite Virgo III using data from the Vera C. Rubin Observatory Data Preview 2 (DP2). Virgo III was observed in the Rubin "Cosmic Treasure Chest" (M49) First Look field, which contains 924 visits in the u,g,r,i bands comprising ~10.5hrs of exposure time with LSSTCam. These data are considerably deeper than the majority of DP2, with a $5σ$ limiting magnitude that approaches the expected 10-year depth of LSST (~25.2-26.5mag, depending on band). We report the morphological and stellar population parameters of Virgo III measured with the maximum-likelihood-based package ugali. The depth of the Rubin imaging yields more than a factor of four increase in the number of candidate member stars ($N_* = 114^{+11}_{-11}$) relative to the Virgo III discovery results ($N_* = 25^{+5}_{-4}$), enabling significantly more precise morphological constraints. Our best-fit parameters broadly agree with previous measurements, further confirming that Virgo III has properties that are consistent with an ultra-faint dwarf galaxy ($M_V = -2.72^{+0.49}_{-0.70}$; $r_{1/2} = 53^{+10}_{-8}$) located at a heliocentric distance of $D_\odot = 151^{+8}_{-8}$. We also demonstrate that the depth and photometric quality of the DP2 data are sufficient to separate metal-poor and metal-rich stars in color-color space. We further present period estimates for the three known RR Lyrae member stars derived from the DP2 forced photometry; we use theoretical Period-Luminosity-Metallicity (PLZ) and Period-Wesenheit-Metallicity (PWZ) relations to obtain independent distance estimates. We find that our period and distance estimates are broadly consistent with previous measurements for these RR Lyrae. These results demonstrate the power of LSST data for the discovery and characterization of ultra-faint dwarf galaxies and motivate future searches for new satellites across the southern sky.

Pai, Aashay [Chicago U.; Chicago U., KICP; SkAI, C↗
DOE OSTI2022

Analysis of aerosol cloud interactions with a consistent signal of meteorology and other influencing parameters

Quantifying the impact of aerosols on cloud micro/macro physical properties and estimating the signature of Aerosol Cloud Interactions (ACI) is one of the challenging tasks in atmospheric sciences. The Moderate Resolution Imaging Spectroradiometer and the European Centre for Medium-Range Weather Forecasts ERA-5 reanalysis data are employed to systematically study the ACI over the monsoon region in Pakistan. Based on the monsoon occurrence and rainfall intensity, the whole region is divided into three sub-regions labeled as highly intensive (R1), moderately intensive (R2) and weak (R3) monsoon region. The results indicate that the monthly mean Aerosol Optical Depth (AOD) peaks in the summer monsoon months (Jun, Jul, Aug, Sep). Here, the well-known Twomey effect whereby the Cloud Droplet Radius (CDR) decreases with increasing AOD holds only over R3; the opposite effects (Anti-Twomey effect) are found over R1 and R2, all passing the test of statistical significance (p<0.05). The multi-year AOD is found to be positively correlated with Cloud Liquid Water Path (CLWP) and Cloud Optical Depth (COD) over R1 and R2, suggesting that thicker clouds containing more water droplets are formed in polluted atmosphere. Over R3, decreases in CLWP and COD are found with increasing AOD only when AOD is less than~0.325. The analysis of ACI over R1 and R2 during the winter months shows similar but stronger responses of CDR, CLWP and COD to the variation in AOD. The weaker responses during the summer monsoon season may attributed to the occurrence of high level cloud and unstable atmospheric condition. Further investigation of the influences of Relative Humidity and pressure vertical velocity on the CDR-AOD relationships shows that although the magnitude of the CDR-AOD correlations change with meteorological conditions, the sign of correlations remain unchanged with meteorological conditions.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Data associated with the manuscript “Radiative impact of record-breaking wildfires from integrated ground-based data” collected in Richland, Washington in September 2020

This data package is associated with the publication “Radiative impact of record-breaking wildfires from integrated ground-based data” submitted to Nature Scientific Reports (Kassianov et al., 2024). Data from ground-based measurements of shortwave and spectrally resolved irradiance and aerosol optical depth (AOD) in the visible and near-infrared spectral ranges were assessed to quantify the radiative impact of the September 2020 wildfires that occurred in the Western United States. Data were collected in September 2020 by several ground-based instruments at the Atmospheric Measurements Laboratory (AML) located in Richland, Washington (46.3451, -119.2792). These data include (1) Aerosol Optical Depth (AOD); (2) spectrally resolved and shortwave (SW) irradiances; (3) backscatter profiles; (4) total sky images; and (5) near-surface ambient air temperatures.The data package consists of five sub-directories: (1) “AML_Ceilometer_”; (2)” AML_CSPHOT_”; (3) “AML_MFRSR_irradiances_”; (4) “AML_SW_irradiances_and_Temp_”; (5) “AML_TSI_images_”; and 6 files stored at the directory level, including the readme, file-level metadata file, and data dictionary. The file-level metadata file (the file ending in “_flmd.csv”) lists all files contained in this data package and descriptions for each. The data dictionary (the file ending in “_dd.csv”) describes each tabular column header’s unit, definition, and structure. Below are descriptions of each sub-directory:“AML_Ceilometer_” includes ceilometer data collected at the AML. These files contain the corresponding narratives of data. Details related to the ceilometer data can be found in Morris (2016). “AML_CSPHOT_” includes ascii files with high-temporal resolution (about 10-15 min) AML CSPHOT data and their daily-averaged counterparts. These two files contain the corresponding narratives of data. Details related to the CSPHOT data can be found in Gregory (2011). “AML_MFRSR_irradiances_” includes ascii files with the AML MFRSR-measured diffuse, normal, and total spectrally resolved irradiance. Details related to the MFRSR data can be found in Hodges and Michalsky (2016) and Koontz et al. (2013). “AML_SW_irradiances_+_Temp_” includes near-surface ambient air temperature and SW irradiances, namely direct normal, diffuse hemispherical, and total hemispheric (global), measured at the AML. These files also incorporate the corresponding narratives of data. Details related to the SW irradiances can be found in Andreas et al. (2018). “AML_TSI_images_” includes Total Sky Images (TSIs) collected at the AML. Details related to the TSI data can be found in Morris (2005).

54 ENVIRONMENTAL SCIENCES↗