Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “density maps”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44

On the photoelectron velocity-map imaging of lutetium monoxide anion LuO{sup −}

We report a combined photoelectron velocity-map imaging spectroscopy and density functional theory investigation on lutetium monoxide anion. Transition between the X {sup 1}Σ{sup +} anion electronic ground state and the neutral X {sup 2}Σ{sup +} electronic ground state is observed. Vibrationally resolved spectra were obtained at four different photon energies, providing a wealth of spectroscopic information for the electronic ground states of the anionic lutetium monoxide and corresponding neutral species. Franck-Condon simulations of the ground-state transition are performed to assign vibrational structure in the spectra and to assist in identifying the observed spectral bands. The electronic ground state of LuO{sup −} is found to have a vibrational frequency of 743 ± 10 cm{sup −1} and an equilibrium bond length of 1.841 Å. The electron affinity of LuO is measured to be 1.624 ± 0.002 eV. The fundamental frequency of ground-state LuO is estimated to be 839 ± 10 cm{sup −1}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Strain effects on in-plane conductance of the topological insulator Bi{sub 2}Te{sub 3}

We investigated the correlation between electrical transport and mechanical stress in a topological insulator, Bi{sub 2}Te{sub 3}, using conductive probe atomic force microscopy in an ultrahigh vacuum environment. After directly measuring charge transport on the cleaved Bi{sub 2}Te{sub 3} surface, we found that the current density varied with applied load. Current mapping revealed a variation of the current on different terraces. The current density increased in the low-pressure regime and then decreased in the high-pressure regime. This variation of current density was explained in light of the combined effect of changes in the in-plane conductance due to spin–orbit coupling and hexagonal warping.

36 MATERIALS SCIENCE↗

Resonant- and avalanche-ionization amplification of laser-induced plasma in air

Amplification of laser-induced plasma in air is demonstrated utilizing resonant laser ionization and avalanche ionization. Molecular oxygen in air is ionized by a low-energy laser pulse employing (2 + 1) resonance-enhanced multi-photon ionization (REMPI) to generate seed electrons. Subsequent avalanche ionization of molecular oxygen and nitrogen significantly amplifies the laser-induced plasma. In this plasma-amplification effect, three-body attachments to molecular oxygen dominate the electron-generation and -loss processes, while either nitrogen or argon acts as the third body with low electron affinity. Contour maps of the electron density within the plasma obtained in O₂/N₂ and O₂/Ar gas mixtures are provided to show relative degrees of plasma amplification with respect to gas pressure and to verify that the seed electrons generated by O₂ 2 + 1 REMPI are selectively amplified by avalanche ionization of molecular nitrogen in a relatively low-pressure condition (≤100 Torr). Such plasma amplification occurring in air could be useful in aerospace applications at high altitude.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magnetic x-ray microscopy at low temperatures – Visualization of flux distributions in superconductors

X-ray Magnetic Circular Dichroism (XMCD) microscopy at liquid nitrogen temperature has been performed on bilayers of high-T{sub c} superconducting YBCO (YBa{sub 2}Cu{sub 3}O{sub 7-δ}) and soft-magnetic Co{sub 40}Fe{sub 40}B{sub 20}. This should allow us to map the magnetic flux density distribution in the current-carrying state of the superconductor with high spatial resolution. For that purpose the UHV scanning X-ray microscope MAXYMUS has been upgraded by a MMR Micro Miniature Joule-Thompson cryostat capable of temperatures between 75 K and 580 K. Resulting XMCD images of the magnetic flux density in the superconductor with a field of view ranging from millimeters to micrometers are presented. The microscope’s unique combination of total electron yield (TEY) measurements together with low temperatures offers novel possibilities concerning the current transport in superconductors on small length scales.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Spatiotemporal measurements of striations in a glow discharge’s positive column using laser-collisional induced fluorescence

Here we have observed the behavior of striations caused by ionization waves propagating in low-pressure helium DC discharges using the non-invasive laser-collision induced fluorescence (LCIF) diagnostic. To achieve this, we developed an analytic fit of collisional radiative model (CRM) predictions to interpret the LCIF data and recover quantitative two-dimensional spatial maps of the electron density, n e , and the ratios of LCIF emission states that can be correlated with T e with the use of accurate distribution functions at localized positions within striated helium discharges at 500 mTorr, 750 mTorr, and 1 Torr. To our knowledge, these are the first spatiotemporal, laser-based, experimental measurements of n e in DC striations. The n e and 447:588 ratio distributions align closely with striation theory. Constriction of the positive column appears to occur with decreased gas pressure, as shown by the radial n e distribution. We identify a transition from a slow ionization wave to a fast ionization wave between 750 mTorr and 1 Torr. These experiments validate our analytic fit of n e , allowing the implementation of an LCIF diagnostic in helium without the need to develop a CRM.

42 ENGINEERING↗

THE PULSATION OF chi CYGNI IMAGED BY OPTICAL INTERFEROMETRY: A NOVEL TECHNIQUE TO DERIVE DISTANCE AND MASS OF MIRA STARS

We present infrared interferometric imaging of the S-type Mira star chi Cygni. The object was observed at four different epochs in 2005-2006 with the Infrared-Optical Telescope Array optical interferometer (H band). Images show up to 40% variation in the stellar diameter, as well as significant changes in the limb darkening and stellar inhomogeneities. Model fitting gave precise time-dependent values of the stellar diameter, and reveals presence and displacement of a warm molecular layer. The star radius, corrected for limb darkening, has a mean value of 12.1 mas and shows a 5.1 mas amplitude pulsation. Minimum diameter was observed at phase 0.94 +- 0.01. Maximum temperature was observed several days later at phase 1.02 +- 0.02. We also show that combining the angular acceleration of the molecular layer with CO (DELTAv = 3) radial velocity measurements yields a 5.9 +- 1.5 mas parallax. The constant acceleration of the CO molecules-during 80% of the pulsation cycle-lead us to argument for a free-falling layer. The acceleration is compatible with a gravitational field produced by a 2.1{sup +1.5} {sub -0.7} solar mass star. This last value is in agreement with fundamental mode pulsator models. We foresee increased development of techniques consisting in combining radial velocity with interferometric angular measurements, ultimately allowing total mapping of the speed, density, and position of the diverse species in pulsation-driven atmospheres.

79 ASTRONOMY AND ASTROPHYSICS↗

AKARI AND BLAST OBSERVATIONS OF THE CASSIOPEIA A SUPERNOVA REMNANT AND SURROUNDING INTERSTELLAR MEDIUM

We use new large area far infrared maps ranging from 65 to 500 {mu}m obtained with the AKARI and the Balloon-borne Large Aperture Submillimeter Telescope missions to characterize the dust emission toward the Cassiopeia A supernova remnant (SNR). Using the AKARI high-resolution data we find a new 'tepid' dust grain population at a temperature of {approx}35 K and with an estimated mass of 0.06 M{sub sun}. This component is confined to the central area of the SNR and may represent newly formed dust in the unshocked supernova ejecta. While the mass of tepid dust that we measure is insufficient by itself to account for the dust observed at high redshift, it does constitute an additional dust population to contribute to those previously reported. We fit our maps at 65, 90, 140, 250, 350, and 500 {mu}m to obtain maps of the column density and temperature of 'cold' dust (near 16 K) distributed throughout the region. The large column density of cold dust associated with clouds seen in molecular emission extends continuously from the surrounding interstellar medium to project on the SNR, where the foreground component of the clouds is also detectable through optical, X-ray, and molecular extinction. At the resolution available here, there is no morphological signature to isolate any cold dust associated only with the SNR from this confusing interstellar emission. Our fit also recovers the previously detected 'hot' dust in the remnant, with characteristic temperature 100 K.

79 ASTRONOMY AND ASTROPHYSICS↗

Andromeda's dust

Spitzer Space Telescope and Herschel Space Observatory imaging of M31 is used, with a physical dust model, to construct maps of dust surface density, dust-to-gas ratio, starlight heating intensity, and polycyclic aromatic hydrocarbon (PAH) abundance, out to R ≈ 25 kpc. The global dust mass is M {sub d} = 5.4 × 10{sup 7} M {sub ☉}, the global dust/H mass ratio is M {sub d}/M {sub H} = 0.0081, and the global PAH abundance is (q {sub PAH}) = 0.039. The dust surface density has an inner ring at R = 5.6 kpc, a maximum at R = 11.2 kpc, and an outer ring at R ≈ 15.1 kpc. The dust/gas ratio varies from M {sub d}/M {sub H} ≈ 0.026 at the center to ∼0.0027 at R ≈ 25 kpc. From the dust/gas ratio, we estimate the interstellar medium metallicity to vary by a factor ∼10, from Z/Z {sub ☉} ≈ 3 at R = 0 to ∼0.3 at R = 25 kpc. The dust heating rate parameter (U) peaks at the center, with (U) ≈ 35, declining to (U) ≈ 0.25 at R = 20 kpc. Within the central kiloparsec, the starlight heating intensity inferred from the dust modeling is close to what is estimated from the stars in the bulge. The PAH abundance reaches a peak q {sub PAH} ≈ 0.045 at R ≈ 11.2 kpc. When allowance is made for the different spectrum of the bulge stars, q {sub PAH} for the dust in the central kiloparsec is similar to the overall value of q {sub PAH} in the disk. The silicate-graphite-PAH dust model used here is generally able to reproduce the observed dust spectral energy distribution across M31, but overpredicts 500 μm emission at R ≈ 2-6 kpc, suggesting that at R = 2-6 kpc, the dust opacity varies more steeply with frequency (with β ≈ 2.3 between 200 and 600 μm) than in the model.

79 ASTRONOMY AND ASTROPHYSICS↗

Efficient optimal reconstruction of linear fields and band-powers from cosmological data

We present an efficient implementation of Wiener filtering of real-space linear field and optimal quadratic estimator of its power spectrum Band-powers. We first recast the field reconstruction into an optimization problem, which we solve using quasi-Newton optimization. We then recast the power spectrum estimation into the field marginalization problem, from which we obtain an expression that depends on the field reconstruction solution and a determinant term. We develop a novel simulation based method for the latter. We extend the simulations formalism to provide the covariance matrix for the power spectrum. We develop a flexible framework that can be used on a variety of cosmological fields and present results for a variety of test cases, using simulated examples of projected density fields, projected shear maps from galaxy lensing, and observed Cosmic Microwave Background (CMB) temperature anisotropies, with a wide range of map incompleteness and variable noise. For smaller cases where direct numerical inversion is possible, we show that our solution matches that created by direct Wiener Filtering at a fraction of the overall computation cost. Even more significant reduction of computational is achieved by this implementation of optimal quadratic estimator due to the fast evaluation of the Hessian matrix. This technique allows for accurate map and power spectrum reconstruction with complex masks and nontrivial noise properties.

79 ASTRONOMY AND ASTROPHYSICS↗

SUBMILLIMETER ARRAY OBSERVATIONS OF MAGNETIC FIELDS IN G240.31+0.07: AN HOURGLASS IN A MASSIVE CLUSTER-FORMING CORE

We report the first detection of an hourglass magnetic field aligned with a well-defined outflow rotation system in a high-mass, star-forming region. The observations were performed with the Submillimeter Array toward G240.31+0.07, which harbors a massive, flattened, and fragmenting molecular cloud core and a wide-angle bipolar outflow. The polarized dust emission at 0.88 mm reveals a clear hourglass-shaped magnetic field aligned within 20° of the outflow axis. Maps of high-density tracing spectral lines, e.g., H{sup 13}CO{sup +} (4-3), show that the core is rotating about its minor axis, which is also aligned with the magnetic field axis. Therefore, both the magnetic field and kinematic properties observed in this region are surprisingly consistent with the theoretical predictions of the classic paradigm of isolated low-mass star formation. The strength of the magnetic field in the plane of sky is estimated to be ∼1.1 mG, resulting in a mass-to-magnetic flux ratio of 1.4 times the critical value and a turbulent-to-ordered magnetic energy ratio of 0.4. We also find that the specific angular momentum almost linearly decreases from r ∼ 0.6 pc to 0.03 pc scales, which is most likely attributed to magnetic braking.

79 ASTRONOMY AND ASTROPHYSICS↗

Development of a machine-learning-based ionic-force correction model for quantum molecular dynamic simulations of warm dense matter

In this work Δ learning is used to map orbital-free density functional theory (OF-DFT) ionic forces to the corresponding Kohn-Sham (KS) DFT ionic forces. The development of the approximate force difference in terms of the ion positions is constructed and serves as a stand in for the ground truth force difference. Descriptor vectors for ion configurations are constructed using all distance between ions in conjunction with an indexing based on a nearest neighbor ranking. It is demonstrated that such a scheme of descriptors can uniquely describe an ionic configuration up to a rotation and reflection when no ambiguity in the nearest neighbor ranking exists. How to handle the case when an ambiguity exists in the nearest neighbor ranking is discussed. As a proof of principle, the model is trained and tested on warm dense hydrogen at temperatures between 1 and 15 eV. Once tested, the model was used to perform molecular dynamic simulations of warm dense hydrogen. Furthermore, the resulting energies and pressures are within 1% and 2% of their respective target KS values.

36 MATERIALS SCIENCE↗

Universal CMB 𝐵-mode spectrum from early causal tensor sources

Many early Universe scenarios predict postinflationary tensor perturbations from causality-limited, subhorizon sources. While the microphysical details may be different, as long as these sources are bounded in duration and correlation length, their tensor power spectra exhibit a universal scaling behavior at small wave number: 𝒫 ℎ ⁡(𝑘)∝𝑘 3 , corresponding to white noise on superhorizon scales at the time of production. If these early causal tensor sources (ECTs) exclusively produce gravitational waves before redshift 𝑧 ∼10 5 , this scaling is realized on all of the scales observed in the CMB, and thus yields a universal multipole distribution for the 𝐵-mode angular power spectrum. Unlike the scale-invariant distributions of inflationary 𝐵 modes, ECTs generically predict enhanced power on small scales and suppressed power on large scales, which allows these source classes to be distinguished given measurements over a sufficient range of angular scales. In this paper, we introduce a unified framework for characterizing ECTs and demonstrate how their universal infrared scaling manifests in low-frequency observables, including CMB 𝐵 modes and stochastic gravitational wave spectral densities. We illustrate this mapping with representative case studies of this universality class involving first-order phase transitions, topological defects, and enhanced scalar perturbations, which source tensor modes at second order in perturbation theory.

79 ASTRONOMY AND ASTROPHYSICS↗

H-GCN: A Graph Convolutional Network Accelerator on Versal ACAP Architecture

Recently Graph Neural Networks (GNNs) have drawn tremendous attentions due to their unique capability to extend the Machine Learning (ML) approaches to broadly defined applications with unstructured data, especially graphs. Comparing with other ML modalities, the acceleration of GNNs is as critical but even more challenging due to the irregularity and heterogeneity from graph typologies that together limit the performance. Existing efforts mainly focus on handling graphs’ irregularity, however, have not studied the heterogeneity. To this end, in this work, we propose H-GCN, a PL-AIE-based hybrid accelerator that leverages the emerging heterogeneity of Xilinx Versal ACAPs to achieve high-performance GNN inference. In particular, H-GCN partitions each graph into three subgraphs based on its inherent heterogeneity and processes them using PL and the newly emerged AIE respectively. To further improve the performance, we explore the sparsity support of AIE and develop an efficient density-aware method to map tiles of SpMM onto the systolic tensor array automatically. Compared with the current state-of-the-art GCN accelerator, HGCN achieves on average 1.5× speedups.

Zhang, Chengming↗

A simple electron counting model for half-Heusler surfaces

Heusler compounds are a ripe platform for discovery and manipulation of emergent properties in topological and magnetic heterostructures. In these applications, the surfaces and interfaces are critical to performance; however, little is known about the atomic-scale structure of Heusler surfaces and interfaces or why they reconstruct. Using a combination of molecular beam epitaxy, core-level and angle-resolved photoemission, scanning tunneling microscopy, and density functional theory, we map the phase diagram and determine the atomic and electronic structures for several surface reconstructions of CoTiSb (001), a prototypical semiconducting half-Heusler. At low Sb coverage, the surface is characterized by Sb-Sb dimers and Ti vacancies, while, at high Sb coverage, an adlayer of Sb forms. The driving forces for reconstruction are charge neutrality and minimizing the number of Sb dangling bonds, which form metallic surface states within the bulk bandgap. We develop a simple electron counting model that explains the atomic and electronic structure, as benchmarked against experiments and first-principles calculations. We then apply the model to explain previous experimental observations at other half-Heusler surfaces, including the topological semimetal PtLuSb and the half-metallic ferromagnet NiMnSb. The model provides a simple framework for understanding and predicting the surface structure and properties of these novel quantum materials.

36 MATERIALS SCIENCE↗

Accurate X-ray diffraction studies of KTiOPO{sub 4} single crystals doped with niobium

Single crystals of potassium titanyl phosphate doped with 4% of niobium (КТР:4%Nb) and 6% of niobium (KTP:6%Nb) are studied by accurate X-ray diffraction at room temperature. The niobium atoms are localized near the Ti1 and Ti2 atomic positions, and their positions are for the first time refined independent of the titanium atomic positions. Maps of difference electron density in the vicinity of K1 and K2 atomic positions are analyzed. It is found that in the structure of crystal КТР:4%Nb, additional positions of K atoms are located farther from the main positions and from each other than in КТРand KTP:6%Nb crystals. The nonuniform distribution of electron density found in the channels of the КТР:4%Nb structure is responsible for ~20% increase in the signal of second harmonic generation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Crustal Strain Rates in the Western United States and Their Relationship with Earthquake Rates

Abstract We present a suite of strain rate models for the western United States based on geologic and geodetic data. The geologic data consist of Quaternary fault-slip rates and the geodetic data consists of a new compilation of Global Positioning System (GPS) velocities derived from continuous, semicontinuous, and campaign measurements. We remove postseismic deformation from the GPS time series in order for our geodetic strain rate model to best capture the interseismic strain accumulation rate. We present models based on either geologic or geodetic data, but also create a hybrid model. Although there are some differences between the models, the large-scale features are the same, with the noticeable exception for the Pacific Northwest where interseismic strain is naturally more distributed than the long-term strain release. We also present a map of earthquake rate densities based on mainshocks, and the result has similar spatial features similar to the strain rate models (at least in the southwestern United States). We perform a general correlation analysis between strain rate and seismicity rate (south of Cascadia) and find a change in linearity between seismicity and strain rates from slow to faster deforming areas with seismicity rates relatively lower for the latter. The extent of that change depends a bit on assumptions made on the declustering and completeness of the catalog, but the finding of a change in slope is robust across the different strain rate models. Linearity for all areas is only expected when Gutenberg–Richter parameters and parameters involved in the conversion from strain to moment rate are uniform across the study area. We discuss these qualifications, but find no single satisfactory explanation for our observation. Moreover, when considering a rather short time and space, theoretical considerations of sampling from a power-law distribution actually predict there to be a power law instead of a linear relationship, generally consistent with our observation.

Geochemistry & Geophysics↗

Measuring Rotation and Manure Effects in an Iowa Farm Soil Health Assessment

Core Ideas Farms with known management histories contribute to soil health research. Rotation‐based systems may increase soil organic carbon when combined with appropriate tillage. Inherent soil properties must be considered in soil health assessments. Rotation effects were more noticeable than manure effects on soil health groupings. Data from on‐farm sites with known management histories are needed to quantify soil biological, chemical, and physical properties influencing carbon stocks and soil health. Surface (0–15 cm) and deep core (0–122 cm) soil samples were collected from fields under two rotations in Boone County, IA. The first was a 5‐yr corn [ Zea mays (L.)], soybean [ Glycine max (L.) Merr.], corn, oat [ Avena sativa (L.)], and alfalfa [ Medicago sativa (L.)] rotation to which 0, 18, or 36 Mg ha −1 of a manure/biosolids mixture was applied prior to planting corn. The second was an 8‐yr rotation with 6 yr of mixed grass and legume pasture followed by corn and an oat crop within which the pasture mixture was reestablished. Soil samples were collected evenly across the predominant soil map units (SMUs). Bulk density (BD), soil organic C (SOC), water‐stable aggregates (WSA), microbial biomass carbon (MBC), pH, Mehlich‐3 and diethylenetriaminepentaacetic acid (DTPA) extractable nutrients, electrical conductivity (EC), and nitrogen (total‐, NH 4 –, and NO 3 –N) were measured. Surface SOC data were consistent with Soil Survey values for the various SMUs. Crop rotation effects were more noticeable than manure/biosolid application rate effects. Data from this study were combined with previously published SOC data in Iowa. Results suggest extended rotation systems or those with cover crops may increase SOC 8 ± 4 g kg −1 compared to corn–soybean rotations (33 vs. 25 g kg −1 ). This study provides on‐farm reference values for soil health assessment tools and draws attention to the importance of inherent soil properties for these assessments.

54 ENVIRONMENTAL SCIENCES↗

Lessons Learned from PNNL Support to Army Corp of Engineers Munitions Sites

PNNL developed and demonstrated statistically-based methods for characterizing sites where unexploded ordnance (UXO) is a concern. These methods, incorporated into PNNL’s Visual Sample Plan (VSP) software, can be used to design geophysical transect surveys and conduct data analyses to identify potential target areas, map and estimate anomaly density across the study area, and delineate target areas where UXO are most likely to be found. These methods have been tested and demonstrated on several wide area sites under the Department of Defense Environmental Security Technology Certification Program (ESTCP).

Pulsipher, Brent A.↗