Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “cycles”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44

SU-D-207A-07: The Effects of Inter-Cycle Respiratory Motion Variation On Dose Accumulation in Single Fraction MR-Guided SBRT Treatment of Renal Cell Carcinoma

Purpose: To assess the dose deposition in simulated single-fraction MR-Linac treatments of renal cell carcinoma, when inter-cycle respiratory motion variation is taken into account using online MRI. Methods: Three motion characterization methods, with increasing complexity, were compared to evaluate the effect of inter-cycle motion variation and drifts on the accumulated dose for an SBRT kidney MR-Linac treatment: 1) STATIC, in which static anatomy was assumed, 2) AVG-RESP, in which 4D-MRI phase-volumes were time-weighted, based on the respiratory phase and 3) PCA, in which 3D volumes were generated using a PCA-model, enabling the detection of inter-cycle variations and drifts. An experimental ITV-based kidney treatment was simulated in a 1.5T magnetic field on three volunteer datasets. For each volunteer a retrospectively sorted 4D-MRI (ten respiratory phases) and fast 2D cine-MR images (temporal resolution = 476ms) were acquired to simulate MR-imaging during radiation. For each method, the high spatio-temporal resolution 3D volumes were non-rigidly registered to obtain deformation vector fields (DVFs). Using the DVFs, pseudo-CTs (generated from the 4D-MRI) were deformed and the dose was accumulated for the entire treatment. The accuracies of all methods were independently determined using an additional, orthogonal 2D-MRI slice. Results: Motion was most accurately estimated using the PCA method, which correctly estimated drifts and inter-cycle variations (RMSE=3.2, 2.2, 1.1mm on average for STATIC, AVG-RESP and PCA, compared to the 2DMRI slice). Dose-volume parameters on the ITV showed moderate changes (D99=35.2, 32.5, 33.8Gy for STATIC, AVG-RESP and PCA). AVG-RESP showed distinct hot/cold spots outside the ITV margin, which were more distributed for the PCA scenario, since inter-cycle variations were not modeled by the AVG-RESP method. Conclusion: Dose differences were observed when inter-cycle variations were taken into account. The increased inter-cycle randomness in motion as captured by the PCA model mitigates the local (erroneous) hotspots estimated by the AVG-RESP method.

60 APPLIED LIFE SCIENCES↗

Clustering of Observed Diurnal Cycles of Precipitation over the United States for Evaluation of a WRF Multiphysics Regional Climate Ensemble

The diurnal cycle of precipitation during the summer season over the contiguous United States is examined in eight distinct regions. These were identified using cluster analysis applied to the diurnal cycle characteristics at 2141 rainfall gauges over the 10-yr period 1991–2000. Application of the clustering technique provides a physically meaningful way of identifying regions for comparison of model results with observations. The diurnal cycle for each region is specified in terms of 1) total precipitation, 2) frequency of precipitation occurrence, and 3) intensity of precipitation per occurrence on an hourly basis averaged over the 10-yr period. The amplitude and phase of each element of the diurnal cycle was obtained from harmonic analysis and has been compared with the results of a 24-member multiphysics ensemble of simulations produced by the Weather Research and Forecast (WRF) Model on a region-by-region basis. Three cumulus schemes, two radiation schemes, two microphysics schemes, and two planetary boundary layer schemes were included in the ensemble. Simulations of total precipitation showed reasonable agreement with observations in regions where the diurnal cycle is directly influenced by solar radiation, (e.g., the U.S. Southeast), but they were less successful in regions where other factors influence the diurnal cycle (e.g., the central United States). The diurnal cycle of precipitation frequency and intensity showed substantial biases in the simulations of all eight regions, namely, overestimation of occurrences and underestimation of intensities. Simulations were sensitive to the cumulus and radiation schemes but were largely insensitive to either microphysics or planetary boundary layer schemes.

Mooney, P. A.↗

Reactivity-controlled compression ignition drive cycle emissions and fuel economy estimations using vehicle system simulations

In-cylinder blending of gasoline and diesel to achieve reactivity-controlled compression ignition has been shown to reduce NO X and soot emissions while maintaining or improving brake thermal efficiency as compared with conventional diesel combustion. The reactivity-controlled compression ignition concept has an advantage over many advanced combustion strategies in that the fuel reactivity can be tailored to the engine speed and load, allowing stable low-temperature combustion to be extended over more of the light-duty drive cycle load range. In this paper, a multi-mode reactivity-controlled compression ignition strategy is employed where the engine switches from reactivity-controlled compression ignition to conventional diesel combustion when speed and load demand are outside of the experimentally determined reactivity-controlled compression ignition range. The potential for reactivity-controlled compression ignition to reduce drive cycle fuel economy and emissions is not clearly understood and is explored here by simulating the fuel economy and emissions for a multi-mode reactivity-controlled compression ignition–enabled vehicle operating over a variety of US drive cycles using experimental engine maps for multi-mode reactivity-controlled compression ignition, conventional diesel combustion, and a 2009 port-fuel injected gasoline engine. Drive cycle simulations are completed assuming a conventional mid-size passenger vehicle with an automatic transmission. Multi-mode reactivity-controlled compression ignition fuel economy simulation results are compared with the same vehicle powered by a representative 2009 port-fuel injected gasoline engine over multiple drive cycles. Finally, engine-out drive cycle emissions are compared with conventional diesel combustion, and observations regarding relative gasoline and diesel tank sizes needed for the various drive cycles are also summarized.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Characterization of temporal variations and feedback timescales of exhaust gas recirculation gas properties using high-speed diode laser absorption spectroscopy for next-cycle control of cyclic variability

Dilute combustion offers efficiency gains in boosted gasoline direct injection engines both through knock-limit extension and thermodynamic advantages (i.e. the effect of γ on cycle efficiency), but is limited by cyclic variability at high dilution levels. Past studies have shown that the cycle-to-cycle dynamics are a combination of deterministic and stochastic effects. The deterministic causes of cyclic variations, which arise from feedback due to exhaust gas recirculation, imply the possibility of using active control strategies for dilution limit extension. While internal exhaust gas recirculation will largely provide a next-cycle effect (short-timescale feedback), the feedback of external exhaust gas recirculation will have an effect after a delay of several cycles (long timescale). Therefore, control strategies aiming to improve engine stability at dilution limit may have to account for both short- and long-timescale feedback pathways. This study shows the results of a study examining the extent to which variations in exhaust gas recirculation composition are preserved along the exhaust gas recirculation flow path and thus the relative importance and information content of the long-timescale feedback pathway. To characterize the filtering or retention of cycle-resolved feedback information, high-speed (1–5 kHz) CO 2 concentration measurements were performed simultaneously at three different locations along the low-pressure external exhaust gas recirculation loop of a four-cylinder General Motors gasoline direct injection engine using a multiplexed two-color diode laser absorption spectroscopy sensor system during steady-state and transient engine operation at various exhaust gas recirculation levels. It was determined that cycle-resolved feedback propagates through internal residual gases but is filtered out by the low-pressure exhaust gas recirculation flow system and do not reach the intake manifold. Intermediate variations driven by flow rate and compositional changes are also distinguished and identified.

Dilute combustion↗

VERA Core Simulator methodology for pressurized water reactor cycle depletion

This paper describes the methodology developed and implemented in the Virtual Environment for Reactor Applications Core Simulator (VERA-CS) to perform high-fidelity, pressurized water reactor (PWR), multicycle, core physics calculations. Depletion of the core with pin-resolved power and nuclide detail is a significant advance in the state of the art for reactor analysis, providing the level of detail necessary to address the problems of the U.S. Department of Energy Nuclear Reactor Simulation Hub, the Consortium for Advanced Simulation of Light Water Reactors (CASL). VERA-CS has three main components: the neutronics solver MPACT, the thermal-hydraulic (T-H) solver COBRA-TF (CTF), and the nuclide transmutation solver ORIGEN. This paper focuses on MPACT and provides an overview of the resonance self-shielding methods, macroscopic-cross-section calculation, two-dimensional/one-dimensional (2-D/1-D) transport, nuclide depletion, T-H feedback, and other supporting methods representing a minimal set of the capabilities needed to simulate high-fidelity models of a commercial nuclear reactor. Results are presented from the simulation of a model of the first cycle of Watts Bar Unit 1. The simulation is within 16 parts per million boron (ppmB) reactivity for all state points compared to cycle measurements, with an average reactivity bias of <5 ppmB for the entire cycle. Comparisons to cycle 1 flux map data are also provided, and the average 2-D root-mean-square (rms) error during cycle 1 is 1.07%. To demonstrate the multicycle capability, a state point at beginning of cycle (BOC) 2 was also simulated and compared to plant data. The comparison of the cycle 2 BOC state has a reactivity difference of +3 ppmB from measurement, and the 2-D rms of the comparison in the flux maps is 1.77%. Lastly, these results provide confidence in VERA-CS’s capability to perform high-fidelity calculations for practical PWR reactor problems.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Dry Air Cooler Modeling for Supercritical Carbon Dioxide Brayton Cycle Analysis

Modeling for commercially available and cost effective dry air coolers such as those manufactured by Harsco Industries has been implemented in the Argonne National Laboratory Plant Dynamics Code for system level dynamic analysis of supercritical carbon dioxide (sCO 2 ) Brayton cycles. The modeling can now be utilized to optimize and simulate sCO 2 Brayton cycles with dry air cooling whereby heat is rejected directly to the atmospheric heat sink without the need for cooling towers that require makeup water for evaporative losses. It has sometimes been stated that a benefit of the sCO 2 Brayton cycle is that it enables dry air cooling implying that the Rankine steam cycle does not. A preliminary and simple examination of a Rankine superheated steam cycle and an air-cooled condenser indicates that dry air cooling can be utilized with both cycles provided that the cycle conditions are selected appropriately

42 ENGINEERING↗

High Energy, Long Cycle Life Lithium-ion Batteries for PHEV Application

High-loading and high quality PSU Si anode has been optimized and fabricated. The electrochemical performance has been utilized. The PSU Si-graphite anode exhibits the mass loading of 5.8 mg/cm2, charge capacity of 850 mAh/ g and good cycling performance. This optimized electrode has been used for full-cell fabrication. The performance enhancement of Ni-rich materials can be achieved by a diversity of strategies. Higher Mn content and a small amount of Al doping can improve the electrochemical performance by suppressing interfacial side reactions with electrolytes, thus greatly benefiting the cyclability of the samples. Also, surface coatings of Li-rich materials and AlF 3 are able to improve the performance stability of Ni-rich cathodes. One kilogram of optimized concentration-gradient LiNi 0.76 Co 0.10 Mn 0.14 O 2 (CG) with careful control of composition, morphology and electrochemical performance was delivered to our collaborators. The sample achieved an initial specific capacity close to 190 mA h g -1 at C/10 rate and 180 mA h g -1 at C/3 rate as well as good cyclability in pouch full cells with a 4.4 V upper cut-off voltage at room temperature. Electrolyte additive with Si-N skeleton forms a less resistant SEI on the surface of silicon anode (from PSU) as evidenced by the evolution of the impedance at various lithiation/de-lithiation stages and the cycling data The prelithiation result demonstrates a solution processing method to achieve large area, uniform SLMP coating on well-made anode surface for the prelithiation of lithium-ion batteries. The prelithiation effect with this method is applied both in graphite half cells, graphite/NMC full cells, SiO half cells, SiO/NMC full cells, Si-Graphite half cells and Si-Graphite/NMC full cells with improvements in cycle performance and higher first cycle coulombic efficiency than their corresponding cells without SLMP prelithiation. As to the full cell fabrication and test, full pouch cells with high capacity of 2.2 Ah and 1.2 Ah have been fabricated and delivered. The cells show great uniformity and good cycling performance. The prelithiation method effectively compensate the loss in the first cycle. The cell with high energy density and long-cycle life has been achieved.

25 ENERGY STORAGE↗

Analysis of Brayton Cycles Utilizing Supercritical Carbon Dioxide

This white paper documents a detailed and extensive Brayton cycle analysis that was performed to better understand at a fundamental level the dependence of the Brayton cycle performance on operating conditions, working fluid, supercritical fluid properties, and some cycle non-idealities. This work was performed to better understand the factors controlling Brayton cycle performance and optimal operating conditions, particularly for cycles utilizing supercritical CO 2 (sCO 2 ) as the working fluid. The focus of this study is on cycle performance, particularly efficiency. No cost estimates were performed. However, as a single indirect measure of cycle cost, some sensitivity analyses on specific power (net output divided by working fluid mass flow rate) were included.

42 ENGINEERING↗

Microbial metabolic dependency and its impacts on the soil carbon cycle (Final Technical Report, DE-SC0016364)

The terrestrial biosphere contains a large fraction of global carbon (C) and nearly 70% of the organic C in terrestrial systems is found in soils. Global changes in atmospheric CO 2 , temperature, precipitation, and ecosystem N inputs, will impact primary production and carbon inputs to soils, but it remains difficult to predict soil responses to these environmental conditions. Our ability to predict C-cycle responses to global change remains limited by unexplained variability within the terrestrial C-cycle. Our difficulty in predicting responses of the soil C-cycle to environmental change suggests a need for a greater understanding of the biotic mechanisms that govern soil C-transformations. Changes in microbial community structure and function have been proposed to impact soil processes, but mechanistic connections between microbial activity and C-cycle transformations remain poorly described. We assembled an interdisciplinary team to conduct cross-scale examination of microbial contributions to C-cycle dynamics and C-fate in soils. We investigated microbial contributions to soil C-transformations using a suite of complementary isotopic techniques including DNA-Stable Isotope Probing (DNA-SIP), metagenomic-SIP, metabolomic-SIP, proteomic-SIP, and microspatial analysis of soil organic C. These techniques were deployed in experiments that tested fundamental assumptions that underlie terrestrial C-cycle models. We characterized the functional characteristics of soil microorganisms responsible for major C-transformations in soil, evaluated the metabolic and ecological interactions that underlie soil C-cycle dynamics, and evaluated the degree to which these interactions impact rates of C mineralization and stabilization in soils.

54 ENVIRONMENTAL SCIENCES↗

Simulated hydrological dynamics and coupled iron redox cycling impact methane production in an Arctic soil: Modeling Archive

This Modeling Archive is in support of an NGEE Arctic publication "Simulated hydrological dynamics and coupled iron redox cycling impact methane production in an Arctic soil" in the Journal of Geophysical Research-Biogeosciences. We simulated biogeochemical cycling in arctic soils using the PFLOTRAN geochemical model combined with measurements from previous NGEE Arctic incubations of polygonal permafrost soils in northern Alaska (Zheng et al., 2018). Simulated iron cycling, carbon dioxide production, and methane production were compared with incubation measurements and the parameterized model was then used to simulate coupled iron and carbon cycling over repeated oxic-anoxic cycles at different levels of carbon substrate availability and pH. The most recent data version (2.0) in the archive incorporates changes to the model and simulations as suggested by reviewers during the manuscript review process. These changes include an updated parameterization of the model; a new set of simulations omitting the iron cycle for direct evaluation of how iron cycle processes affect modeled outcomes; and a set of simulations testing different scenarios of carbon substrate availability in addition to scenarios of initial soil pH. This archive contains simulation code, model output, and analysis code for PFLOTRAN simulations. All scripts are python except the batch script for submitting multiprocessor jobs. Note that the model also requires compiled versions of the Alquimia interface and the NGEE Arctic fork of the PFLOTRAN geochemical simulator (see the README_INSTALL document for basic instructions). The Output directory contains eight data files in netCDF format generated by the model. The Next-Generation Ecosystem Experiments: Arctic (NGEE Arctic), was a 10-year research effort (2012-2022) to reduce uncertainty in Earth System Models by developing a predictive understanding of carbon-rich Arctic ecosystems and feedbacks to climate. NGEE Arctic was supported by the Department of Energy's Office of Biological and Environmental Research. The NGEE Arctic project had two field research sites: 1) located within the Arctic polygonal tundra coastal region on the Barrow Environmental Observatory (BEO) and the North Slope near Utqiagvik (Barrow), Alaska and 2) multiple areas on the discontinuous permafrost region of the Seward Peninsula north of Nome, Alaska. Through observations, experiments, and synthesis with existing datasets, NGEE Arctic provided an enhanced knowledge base for multi-scale modeling and contributed to improved process representation at global pan-Arctic scales within the Department of Energy's Earth system Model (the Energy Exascale Earth System Model, or E3SM), and specifically within the E3SM Land Model component (ELM).

54 ENVIRONMENTAL SCIENCES↗

System studies of coal fired-closed cycle MHD for central station power plants

This paper presents a discussion of the closed-cycle MHD results obtained in a recent study of various advanced energy-conversion power systems. The direct coal-fired MHD topping-steam bottoming cycle was established as the current choice for central station power generation. Emphasis is placed on the background assumptions and the conclusions that can be drawn from the closed-cycle MHD analysis. It is concluded that closed-cycle MHD has efficiencies comparable to that of open-cycle MHD. Its cost will possibly be slightly higher than that of the open-cycle MHD system. Also, with reasonable fuel escalation assumptions, both systems can produce lower-cost electricity than conventional steam power plants. Suggestions for further work in closed-cycle MHD components and systems are made.

Zauderer, B.↗

Status of the DOE /STOR/-sponsored national program on hydrogen production from water via thermochemical cycles

A pure thermochemical cycle is a system of linked regenerative chemical reactions which accepts only water and heat and produces hydrogen. Thermochemical cycles are potentially a more efficient and cheaper means of producing hydrogen from water than is the generation of electricity followed by electrolysis. The Energy Storage Systems Division of the Department of Energy is currently funding a national program on thermochemical hydrogen production. The National Aeronautics and Space Administration is responsible for the technical management of this program. The goal is to develop a cycle which can potentially operate with an efficiency greater than 40% using a heat source providing a maximum available temperature of 1150 K. A closed bench-scale demonstration of such a cycle would follow. This cycle would be labeled a 'reference cycle' and would serve as a baseline against which future cycles would be compared.

Baker, C. E.↗

Solar flare protons and alpha particles during the last three solar cycles

This paper presents solar-flare-associated proton and alpha-particle fluxes determined for major events from October 1972 through March 1987 (the period that represents the last part of solar cycle 20 and the whole of solar cycle 21), using data obtained by detectors on board the IMP-7 and IMP-8 satellites, along with earlier obtained data for cycle 20. It was found that the average omnidirectional flux of protons with kinetic energy above 10 MeV for cycle 21 (64/sq cm per sec) is lower than the corresponding number for cycle 20 (92/sq cm per sec) and for the cycle 19 (378/sq cm per sec). No definitive correlation was found to exist between cycle-averaged solar flare proton fluxes and peak sunspot numbers.

Goswami, J. N.↗

Bimodality and the Hale cycle

Evidence is provided of a modulation of between 20 and 24 yr for the Hale cycle, and comparison of consecutive pairs of cycles strongly suggests that even-numbered cycles are preferentially paired with odd-numbered following cycles. The results indicate that cycles 22 and 23 form a new cyle pair. The sum of monthly mean sunspot numbers over consecutively paired sunspot cycles for Hale cycle 12 is found to be about 19,100 + or - 3000.

Wilson, Robert M.↗

A transient plasticity study and low cycle fatigue analysis of the Space Station Freedom photovoltaic solar array blanket

The Space Station Freedom photovoltaic solar array blanket assembly is comprised of several layers of materials having dissimilar elastic, thermal, and mechanical properties. The operating temperature of the solar array, which ranges from -75 to +60 C, along with the material incompatibility of the blanket assembly components combine to cause an elastic-plastic stress in the weld points of the assembly. The weld points are secondary structures in nature, merely serving as electrical junctions for gathering the current. The thermal mechanical loading of the blanket assembly operating in low earth orbit continually changes throughout each 90 min orbit, which raises the possibility of fatigue induced failure. A series of structural analyses were performed in an attempt to predict the fatigue life of the solar cell in the Space Station Freedom photovoltaic array blanket. A nonlinear elastic-plastic MSC/NASTRAN analysis followed by a fatigue calculation indicated a fatigue life of 92,000 to 160,000 cycles for the solar cell weld tabs. Additional analyses predict a permanent buckling phenomenon in the copper interconnect after the first loading cycle. This should reduce or eliminate the pulling of the copper interconnect on the joint where it is welded to the silicon solar cell. It is concluded that the actual fatigue life of the solar array blanket assembly should be significantly higher than the calculated 92,000 cycles, and thus the program requirement of 87,500 cycles (orbits) will be met. Another important conclusion that can be drawn from the overall analysis is that, the strain results obtained from the MSC/NASTRAN nonlinear module are accurate to use for low-cycle fatigue analysis, since both thermal cycle testing of solar cells and analysis have shown higher fatigue life than the minimum program requirement of 87,500 cycles.

Armand, Sasan C.↗

Interleaving Magellan altimetry data acquisition between mapping cycles 1 and 2

The Magellan spacecraft has been systematically mapping the surface of Venus since September 15, 1990, using side-looking synthetic aperture radar imaging and nadir-pointed altimetry. Venus rotates slowly under the nearly polar mapping orbit, completing a full revolution in 243 days, one 'mapping cycle'. The altimeter collects a 10 km swath of altitude measurements each orbit. The groundtrack advances 21 km each orbit due to the rotation of Venus, leaving an 11 km gap of unmeasured terrain. To obtain global surface coverage by the altimeter, these gaps are eliminated by interleaving the swaths collected during the second mapping cycle with those from the first mapping cycle. Interleaving was put into effect by a propulsive maneuver, executed at the end of the first mapping cycle, on May 17, 1991. The orbit node was changed by +0.106 degrees, so that the cycle 2 groundtracks would bisect adjacent cycle 1 groundtracks. This paper describes the maneuver design and execution results, including the problem and solution of the groundtrack prediction to the end of the first mapping cycle.

Engelhardt, D. B.↗

Cosmic ray modulation near the onset and maximum phases of solar activity cycle 22

Using data obtained with neutron monitors we study the cosmic-ray modulation of the five-year developmental phase of solar activity cycle (SAC) 22. The main characteristics of the observed modulation are compared with those of cycle 19. The similarities and differences between the two cycles are noted. The data indicate that the amplitude of the observed modulation is larger at higher and lower primary rigidities than that for cycle 19, which still remains the most active cycle. The lowest ever monthly-mean counting rates were obtained in June 1991. Even so, based upon our prior experience, we expect the recovery of the cosmic ray intensity in SAC 22 to follow the pattern observed for cycles 20 and 18, rather than that for cycle 19.

Ahluwalia, H. S.↗

A Modified Through-Flow Wave Rotor Cycle with Combustor Bypass Ducts

A wave rotor cycle is described which avoids the inherent problem of combustor exhaust gas recirculation (EGR) found in four-port, through-flow wave rotor cycles currently under consideration for topping gas turbine engines. The recirculated hot gas is eliminated by the judicious placement of a bypass duct which transfers gas from one end of the rotor to the other. The resulting cycle, when analyzed numerically, yields an absolute mean rotor temperature 18% below the already impressive value of the conventional four-port cycle (approximately the turbine inlet temperature). The absolute temperature of the gas leading to the combustor is also reduced from the conventional four-port design by 22%. The overall design point pressure ratio of this new bypass cycle is approximately the same as the conventional four-port cycle. This paper will describe the EGR problem and the bypass cycle solution including relevant wave diagrams. Performance estimates of design and off-design operation of a specific wave rotor will be presented. The results were obtained using a one-dimensional numerical simulation and design code.

Paxson Daniel E.↗