Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “cost analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Assessment of Amine-Based CO2BOLs for Direct Air Capture

Direct air capture (DAC) technologies extract CO 2 from the atmosphere for CO 2 storage, or utilization. Capturing CO 2 from the air is the most expensive application of carbon capture because CO 2 in the atmosphere is very dilute. There are limited number of CO 2 capture technologies for DAC application. This project aims at developing an energy efficient technology for DAC, leveraging two PNNL’s chemistries (solid and liquid CO 2 capture). Three CO 2 capture sorbents consisting of amine based CO 2 BOLs immobilized in mesoporous silica were designed, synthesized, and tested. These sorbents had ~ 19-23 wt.% amine loadings which is lower than typical amine-based silica sorbents. The surface area and pore volumes of these solid supported CO 2 BOLs are lower compared to those of the pristine silica support. The CO 2 capture performance of these materials was significantly lower than the typical silica supported amines due to low amine loading and higher molecular weight with low amine density. These results show that immobilize CO 2 BOLs in silica are not viable materials for removing CO 2 from ambient air. This project also designed, synthesized at tested liquid solvents for DAC application. Solvent properties that is vapor pressure, CO 2 uptake capacity, kinetics, and viscosity for three novel solvents were evaluated. The CO 2 uptake capacity for one of the most promising amine-based solvent BEPBEGDA was the highest at 13.2 wt% corresponding to 97 mol%. The vapor pressure of the BEPBEGDA solvents were very low at 80 °C compared to other solvents making them suitable for DAC application. The effect of humidity on the CO 2 capture performance of these solvents was evaluated which shows that presence of moisture doesn’t have a negative effect on the CO 2 uptake performance but makes it slightly better. The performances of these solvents were slightly below that of the 0.1M NaOH solution tested under similar conditions. Despite of the slightly lower CO 2 uptake, it is expected that these liquid solvents will have lower regeneration temperature and minimum evaporative losses due their low vapor pressure. Future work will focus on optimization of the liquid solvents for DAC application to improve both CO 2 capture efficiency and capacity without viscosity and vapor pressure increase. Testing of these solvents under DAC conditions using a gas liquid contactor that mimic industrial applications is needed. Solvent cost projection, techno-economic analysis and life cycle analysis are required to evaluate economic viability of this technology.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Spatiotemporal Adaptive Passive Direct Air Capture

Carbon Collect Inc., along with Arizona State University, the Electric Power Research Institute (EPRI), PM Group, and Trimeric Corporation, completed an initial design of a commercial-scale, passive direct air capture (DAC) system termed “carbon trees” that will capture, separate, and store at least 100,000 tonnes/year of carbon dioxide (CO2) from air (net basis). Passive DAC is unique among DAC technologies in that passive air delivery by wind avoids the energy penalty of forced convection. Carbon Collect Inc.’s sorbent-agnostic approach offers the flexibility to choose sorbents for a wide range of climates. A combination of steam, low-grade heat, and vacuum releases the CO2 from the sorbent, which is extracted from the chamber and purified and compressed for geological storage. A commercial carbon tree forest combines the output of several thousand trees for compression and purification with high heat and energy integration. The project team prepared an initial engineering design package for each of three geographically diverse host sites throughout the United States to better understand the effect of local/regional ambient conditions on DAC system performance and project costs. A techno-economic analysis, life cycle analysis, business case analysis, and an environmental, health, and safety risks assessment were also completed for each of the three geographically diverse host sites.

14 SOLAR ENERGY↗
DOE OSTI2025

ROTA-CAP™: An Intensified Carbon Capture System Using Rotating Packed Beds (Final Scientific/Technical Report)

GTI Energy and Carbon Clean Solutions Limited successfully designed, constructed, and operated an integrated ROTA-CAP carbon capture skid. ROTA-CAP™ is a process intensification technology, applied for post-combustion carbon capture, which utilizes the centrifugal forces generated from rotation of rotating packed beds as well as advanced solvents to achieve increased mass transfer rates 1-2 orders of magnitude higher than conventional columns while substantially decreasing footprint. The test skid, which consisted of a dual stage RPB absorber with external interstage cooling and a single stage RPB regenerator, was operated at capacities up to 0.5 tonne/day of CO 2 capture with flue gas concentrations ranging from 4% to 22% CO 2 by vol. CO 2 removal rates greater than 95% were achieved, with CO 2 product purity also exceeding 95% by vol. Over 1,600 hours of operation were accumulated throughout the project, including over 1,000 hours of operation of the with real flue gas containing at least 9.8% CO 2 by vol. The skid was operated continuously for 24 hours per day and 7 days per week over the course of 7 long-term test campaigns, with the campaigns ranging from approximately 2-4 weeks per campaign. A techno-economic analysis was performed, and a cost of capture of $\$$41.18/tonne CO 2 was calculated for the ROTA-CAP process, compared to $\$$45.75/tonne for a Cansolv-based process. These results show a cost reduction of approximately 10% compared to the Cansolv-based process. Although this still exceeds the target cost of capture of $\$$30/tonne specified for this project, GTI expects that the cost of capture can be further reduced through further optimization of the design and technology. GTI also performed an engineering design review to determine the scale-up potential of the technology, with the results of the preliminary assessment indicating that it appears to be feasible to scale up the RPB technology to 4,000 TPD. It was also determined that both horizontal and vertical rotor orientations are feasible, though there are mechanical advantages to the vertical orientation.

20 FOSSIL-FUELED POWER PLANTS↗
DOE OSTI2024

Co-synthesis of Hydrogen and High-Value Carbon Products from Methane Pyrolysis

The ARPA-E Methane Pyrolysis Project successfully developed a scalable technology for hydrogen production with low-CO x emission through methane pyrolysis, co-producing high-value carbon nanotubes (CNTs). The project focused on optimizing reactor design, enhancing catalyst performance, and assessing techno-economic feasibility to create a commercially viable and environmentally sustainable process. The fluidized bed reactor achieved over 90% methane (CH 4 ) conversion by using a 5% CO 2 co-feed, which stabilizes carbon yields and minimizes catalyst deactivation. This setup allowed for continuous operation across ten cycles, each consisting of a 14-minute pyrolysis phase followed by a 10-minute dislodging phase to remove a fraction of the accumulated carbon, resulting in stable performance and high-quality CNT production. In parallel, monolith reactors coated with Fe demonstrated a sustained methane conversion of 73% while producing CNTs with high crystallinity. Although promising for continuous operation, monolith reactors face challenges in coating durability and scalability, highlighting areas for further optimization in commercial applications. Catalyst formulation played a key role in enhancing process efficiency. The core catalyst used was 5%Fe/Al 2 O 3 (wt%), optimized through wet impregnation, which improved CNT morphology, yielding longer and more uniform CNTs. The catalyst's performance was further enhanced by adding promoters: 2.5 wt% Ni increased methane conversion close to the thermodynamic limit, while 2.5 wt% Mn improved CNT alignment and crystallinity, and 1.5 wt% NaCl boosted CNT morphology but slightly lowered methane conversion. These adjustments allowed the reactor to maintain high methane conversion while producing high-quality CNTs, enabling stable performance over multiple cycles. To address carbon buildup and ensure uninterrupted operation, a pneumatic conveying tube was implemented for effective carbon dislodging in the fluidized bed configuration. CO 2 and H 2 O co-feeds were also introduced to enhance carbon removal, with CO 2 boosting CNT yield by approximately 15%. This setup enabled stable reactor operation across multiple cycles, preventing clogging and minimizing catalyst wear, making the process suitable for industrial scaling. Techno-economic analysis (TEA) projected hydrogen production costs between $\$$1.00 and $\$$1.64 per kilogram, with CNT values assumed at $\$$375/ton and $\$$100/ton. The life cycle assessment showed that CO 2 emissions could be as low as 0.64 kg CO 2 e/kg H 2 at 95% methane conversion assuming an electricity input of 50 kg CO 2 e/MWh. Even at 50% methane conversion, emissions remained below 1 kg CO 2 e/kg H 2 , demonstrating the process's low-emission potential and making it a viable alternative to traditional steam methane reforming. Overall, the results from this project demonstrate the feasibility of a pyrolysis process where carbon is continuously removed from the catalyst surface and hydrogen is continuously produced until a catalyst regeneration step is required to fully clean the catalyst surface and renew catalyst performance. Major open challenges are related to avoiding the loss of catalyst material in the dislodged carbon during fluidized bed conditions, since our best result demonstrated a carbon purity of ~70 wt. % (rest being iron and alumina). A monolith reactor was used to favor dislodgement of carbon compared to fluidized bed conditions but our results do not demonstrate an advantage of the monolith configuration. Catalyst performance was similar to fluidized bed conditions with slower deactivation rates overall, but we could not observe carbon dislodging in any of the tens of experiments that were run at Stanford. Our results show that the most relevant areas of improvement are related to the fundamental understanding of the iron-carbon interface for dislodging, and the development of catalyst that can produce CNTs via a base-growth mechanism such that catalyst is not lost in the dislodgement steps. The final report documents all findings and methodologies in detail, providing a valuable resource for the scientific community. By building on these results, researchers can further advance methane pyrolysis technology, moving toward a more sustainable, scalable pathway for hydrogen production. This work lays the foundation for future research and commercial efforts to reduce emissions in hydrogen production while generating valuable carbon products.

08 HYDROGEN↗
DOE OSTI2026

DAISY: A Rapid Approach to Evaluating Marine Energy Converter Sound (Final Technical Report)

This project’s objective was to improve the quality of acoustic information about marine energy converters that could be collected from groups of drifting hydrophones, while reducing the costs of deployment and data analysis. This was achieved through technology development addressing four focus areas: (1) minimizing flow-noise and self-noise, (2) integrating metadata streams into a single data acquisition system, (3) developing post-processing routines to facilitate rapid data review, and (4) enabling objective identification of marine energy converter sound against a backdrop of ambient noise using time-delay-of-arrival localization.

16 TIDAL AND WAVE POWER↗
DOE OSTI2026

A Systematic Review and Integrated Approach to Modeling of Aging Utility Scale PV Systems

The growing deployment of utility-scale photovoltaic (PV) systems has increased the importance of techno-economic modeling operational photovoltaic (PV) systems for predicting energy yield, optimizing asset management, and informing financial decisions. Through a systematic review of literature and current industry practices, we review the different common modeling practices of a system's configuration and age, performance and degradation, operation and maintenance (O&M), while also focusing on specific considerations for repowering, revamping, and decommissioning. Building on the synthesis, we develop a structured framework for techno-economic modeling of operating PV systems that integrate performance and degradation analysis, a decommissioning and repowering cost model that estimates the system's end-of-life costs to reduce uncertainty quantifications and improve consistency across the sector. This research contributes to improved modeling methodologies and potentially to reduced financial performance requirements by providing practitioners with input resources and practical approaches to estimate performance, degradation, and costs associated with continued operation, revamping, repowering, or decommissioning decisions.

14 SOLAR ENERGY↗
DOE OSTI2021

Can Agricultural Management Induced Changes in Soil Organic Carbon Be Detected Using Mid-Infrared Spectroscopy?

A major limitation to building credible soil carbon sequestration programs is the cost of measuring soil carbon change. Diffuse reflectance spectroscopy (DRS) is considered a viable low-cost alternative to traditional laboratory analysis of soil organic carbon (SOC). While numerous studies have shown that DRS can produce accurate and precise estimates of SOC across landscapes, whether DRS can detect subtle management induced changes in SOC at a given site has not been resolved. Here, we leverage archived soil samples from seven long-term research trials in the U.S. to test this question using mid infrared (MIR) spectroscopy coupled with the USDA-NRCS Kellogg Soil Survey Laboratory MIR spectral library. Overall, MIR-based estimates of SOC%, with samples scanned on a secondary instrument, were excellent with the root mean square error ranging from 0.10 to 0.33% across the seven sites. In all but two instances, the same statistically significant (p < 0.10) management effect was found using both the lab-based SOC% and MIR estimated SOC% data. Despite some additional uncertainty, primarily in the form of bias, these results suggest that large existing MIR spectral libraries can be operationalized in other laboratories for successful carbon monitoring.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Separations Consortium: Lignin Rich Stream Fractionation and Purification

In support of the Bioenergy Technologies Office in converting lignin to fuels and chemicals, this project develops scalable separations based on membranes and Electordeionization (EDI) to recover low molecular weight (LMW) compounds from lignin rich streams. The project addresses three technology barriers in developing the bioeconomy; (1) Cost of production (2) Selective separation of organic acid species, and (3) Advanced bioprocess development. Specifically, membrane cascades using Tangential Flow Filtration (TFF) are investigated for the recovery of LMW lignin compounds from lignin rich streams such as Alkaline Pretreatment Liquor (APL), Reductive Catalytic Fractionation (RCF) oil, and Catalytic Oxidation oil. Process concepts, including dynamic filtration, are investigated to meet specific performance targets indicated by the consortium's Industrial Advisory Board for the membrane filtration including maintaining permeance > 1 LMH/bar and an overall cost target of < $1/kg of LMW lignin. EDI is investigated as an integral part of the membrane cascade to recover LMW aromatic acids and as an alternative to nanofiltration. Economic analysis of the processes is presented with a focus on minimizing energy consumption and capital expenditure. Furthermore, a sensitivity analysis is presented to identify key cost drivers and optimize holistic process operating conditions.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2021

Hydraulic Response to Thermal Stimulation Efforts at Raft River Based on Stepped Rate Injection Testing

The injection well stimulation project at the Raft River geothermal field tests the effect of long-term cold water injection and high pressure injection on well injectivity, improvements to which could reduce operating costs. The primary data for analysis and interpretation of the injection test are step-rate flow tests run before each new phase of the injection. These tests were analyzed using a combination of standard pump-test analytical solution methods and methods developed expressly for the observed conditions. The stepped rate injection tests, combined with long-term flow and pressure response data suggest that the well is located within a fractured formation of low transmissivity but high storativity. These calculated parameters appeared to increase with pressure during the first injection test and the higher values were reproduced during the second stepped rate test. Calculated transmissivity and storativity are on the order of 4E-5 m cm 2 and 1E-4 m Pa -1 , respectively. The apparent pressure dependence of fitted hydraulic parameters may reflect near-well fracture compliance that increased the effective radius of the wellbore during the first test. While the type curve fit analysis also suggests that the reservoir behaves as a uniformly fractured reservoir with a radial flow regime, the hydraulic parameters indicate that condition may exist only a very limited distance (<10 m) from the well. Longer-term pressure response suggests that flow in the system effectively reaches steady state in a period of less than a day, which may reflect pressure stabilization resulting from pressure-dependent permeability or a region of much higher permeability located with a few meters of the well. The transmissivity estimates obtained from this analysis, converted to approximate fracture density and aperture, provide useful constraints on the distance to which the thermal front may migrate from the well during the cold water injection phase of the stimulation project. We estimate that the cooling front will migrate less than a tenth of a kilometer over an approximately one-year injection period. Here, the effects of that cooling, however, may be substantial, because increases in permeability have maximum effect nearest the well.

cold water injection↗
DOE OSTI2020

Erosion-Corrosion Detection in Carbon Steel Pipe Loops using SRNLs Thickness and Mass Loss Measurement Coupons - 20464

Structural health of waste transfer infrastructure is of utmost importance to DOE and communities surrounding their active sites. A Fitness-for-Service (FFS) program for the Waste Transfer System has been implemented by the US Department of Energy (DOE) for the purposes of evaluating and quantifying the degradation of critical components. Currently, the method of approach is to section and evaluate pipelines that have been removed at end service. In order to augment data collection methods applied to making lifespan estimates of waste transfer system components, Florida International University (FIU) has been investigating new-technology based strategies for quantifying the rate of degradation. Present research considers the option of a coupon system installed on a section of pipe at points of interest that will provide easy access to high resolution measurements of erosion/corrosion rates during operation. Researchers at Savannah River National Laboratory (SRNL) have developed this novel solution for in situ erosion and corrosion measurements in many applicable locations such as tanks, pipes, ducts, and injection points. The coupons are approximately 12.7 mm (1/2 inch) in diameter and 25.4 mm (1 inch) in length and can be placed in the pipe sections using Swagelok compression fittings. The coupon design allows for monitoring of the total degradation resulting from corrosion and erosion. High-resolution Ultrasonic Thickness (UT) testing allows in-situ monitoring of both degradation mechanisms. When removed from the system mass loss resulting from corrosion and erosion may also be evaluated. Experimental testing at FIU implemented the SRNL coupon system in a 6.10 meter (20 foot) pipe loop system comprised of 50.8 mm (2 inch) and 76.2 mm (3 inch) pipe sections in order to replicate expected use cases at the sites. Operational conditions were emulated by pumping abrasive materials through the pipeline at full capacity and collecting measurements from the SRNL coupons. Initial testing was conducted by circulating water followed by a mixture of sand and water for uniform wear rates. Thickness changes and mass loss were measured, and the surface exposed to the process fluid was observed for visual evidence of characteristic wear patterns resulting from an erosive environment. The test matrix consisted of several hours of operation and using fine, medium and coarse grain sands. Test results were analyzed to check for all three parameters (mass loss/gain, thickness change and surface patters) which could provide estimates of the remaining useful life of the pipe sections. Thus, the research presents the findings of this evaluation of the SRNL coupons as a means for conducting high accuracy, cost effective in-situ analysis of pipeline and waste transfer systems for erosion and corrosion susceptibility. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2024

A Comprehensive Assessment of the Viability of Small Modular Reactors in Africa: A Nuclear Security and Nonproliferation Perspective

In response to escalating global energy demands driven by industrialization and the pressing need for decarbonization, this paper explores the potential of Small Modular Reactors (SMRs) as a sustainable energy solution in Africa. Focusing on nuclear security and non-proliferation concerns, the study assesses Africa's energy landscape, emphasizing the need for diverse and reliable power sources. While highlighting the scalability and cost-effectiveness of SMRs, the analysis acknowledges potential challenges associated with their introduction, particularly concerning nuclear security and non-proliferation. Given the recommendation to use High Assay Low Enriched Uranium (HALEU) in some SMRs, it is important to critically consider the security implications of transporting nuclear materials, the proximity of the public to the plant, and the time taken to respond to planned assaults. The possibility of using HALEU makes the nuclear material more prone to adversaries such as sabotage, theft, and terrorism. Utilizing PESTLE analysis, this research seeks to outline the detailed political, economic, social, technological, environmental, and legal readiness of Africa to embrace the first-of-a-kind technology (SMR) while fulfilling its mandate to the Non-Proliferation Treaty (NPT). Examining regulatory frameworks, international cooperation, and safety protocols, the study underscores the importance of regional collaboration to prevent the misuse of nuclear technology for military and malicious intent. Drawing insights from successful case studies, the paper concludes by synthesizing key findings and proposing recommendations for policymakers and stakeholders. These recommendations encompass regulatory enhancement, capacity building, technology transfer, and diplomatic efforts to strengthen nuclear security, non-proliferation, and safeguards in Africa.

Prah, Christina↗
DOE OSTI2024

Multifaceted Challenges and Opportunities Associated with Small Modular Reactors in Africa: A Nonproliferation Perspective

In response to the increasing global energy demands driven by industrialization and the urgent need for decarbonization, this study explores the potential of Small Modular Reactors (SMRs) as a sustainable energy solution in Africa. With a focus on nonproliferation concerns, the paper assesses Africa's energy landscape, emphasizing the need for diverse and reliable power sources. While highlighting the scalability and cost-effectiveness of SMRs, the analysis acknowledges potential challenges associated with adhering to the Nonproliferation Treaty with their mass deployment in the African continent. Examining regulatory frameworks, international cooperation, and security protocols, the study also underscores the importance of regional collaboration to prevent the misuse of nuclear technology for military and malicious purposes. The economic and geopolitical implications of SMR deployment in Africa are also investigated, considering its contributions to energy security and economic growth. Drawing insights from successful case studies, the paper concludes by synthesizing key findings and proposing recommendations for policymakers and stakeholders. These recommendations encompass regulatory enhancement, capacity building, technology transfer, and diplomatic efforts to strengthen nuclear security, nonproliferation, and safeguards. The overarching aim is to advocate for a balanced approach that maximizes the benefits of SMRs while mitigating associated risks to ultimately contribute to the sustainable and secure development of nuclear energy in Africa.

Prah, Christina↗
DOE OSTI2025

Lessons Learned from AskGDR: Usage and Impact Analysis of the Geothermal Data Repository's AI Research Assistant: Preprint

In October of 2024, the Department of Energy's (DOE) Geothermal Data Repository (GDR) team officially launched AskGDR, an AI research assistant resulting from the integration of a Large Language Model (LLM) with the metadata and supporting documents associated with GDR datasets. AskGDR allows GDR users to ask deeper questions about the origin of datasets, the methods used to collect them, and the findings they help support. Using Retrieval Augmented Generation (RAG), AskGDR can be used to summarize findings spread across dozens of papers and technical reports or to extract relevant information describing a single data field. However, generative AI is experimental. The National Renewable Energy Laboratory (NREL) has been collecting metrics on AskGDR and documenting lessons learned during its deployment. This paper will outline the efficacy and impact of AskGDR through analysis of its use, operating costs, number and types of questions asked, and the quality of answers provided.

15 GEOTHERMAL ENERGY↗
DOE OSTI2021

Investigation of Cycling Coal-Fired Power Plants Using High-Fidelity Models

The project delivers a well-integrated and validated simulation platform for cycling operation analysis in coal-fired power plant. Two critical mechanical components of the boiler island were analyzed through mechanical integrity assessment and economic benefit analysis. The current phase of the project focuses on the development of the integrated simulation infrastructure and prove its feasibility and effectiveness using two typical use cases. This integrated platform can help save a lot of engineering efforts for model development and simulation analysis. Through the real simulation scenarios in this document, it was demonstrated that using this platform, an analysis can be completed in approximately 2 days, while it could cost several weeks before using this platform. Going forward, the platform built in this project can be used for more boiler service applications, and it can be further enhanced with more functions/features to maximize its usage and benefits. 1) Extend component-level analysis with more use cases to cover all the major critical components of boiler island under cycling operations. A library of critical components can be developed and validated for typical pulverized coal-fired subcritical boiler units. 2) Develop predictive maintenance features based on the integrated models (Digital Twins) and engineering analysis procedures. Predictive maintenance enables each asset to be serviced based on forecast on life consumption and cost profile for replacing/welding the critical mechanical parts of the boiler. This minimizes the chance of unscheduled shutdowns and emergency services at much higher costs and prevent the fatal accidents in unit operations. 3) Develop and maintain a standard library for critical component analysis under flexible plant operations, which will include libraries of: process models, MI models for typical pressure parts, and economic models with typical plant operating data and ISO power trade data.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2020

Solar Potential Analysis for the MISO Region

As part of the Minnesota Solar Pathways project, funded in part by the Department of Energy’s Solar Energy Technologies Office, Clean Power Research completed a scenario-based analysis that estimates and optimizes the levelized cost of capacity for high renewables penetrations across the entirety of the Midcontinent Independent System Operator (MISO) region. The analysis concludes that it can be cheaper to overbuild solar + wind and curtail surplus than to store all generation. The analysis described in this report was preceded by an analysis completed in 2018 that used the same modeling framework to optimize generation resources located only in Minnesota.

14 SOLAR ENERGY↗
DOE OSTI2020

Kinetics Modeling for Design of Continuous Enzymatic Hydrolysis

Enzymatic hydrolysis of cellulose to monomeric sugars continues to be a limiting step in cost-effectively producing sugar and fermentation-based biofuels from biomass. In particular, the high cost of enzymes coupled with the long time-scale of reaction pose challenges to economic viability. Performing enzymatic hydrolysis in a continuous mode with enzyme recycle may provide a path towards substantially reduced costs for sugar production, but design and analysis are complicated by a lack of suitable kinetics models. Computationally attainable models, such as fractal-based models, require knowledge of the reaction-history of the biomass, and are thus only suitable for describing the batch reactions from which they are derived. Fundamental models, while potentially more generalizable, are often too computationally intensive to use in process or reactor modeling. In this work, a phenomenological rate model is proposed based on a two-phase substrate representation. Good agreement is seen between batch and continuous enzymatic hydrolysis (CEH) experiment data, which validates the model and enables us to solve for reactor design parameters, such as CEH reactor size and stream flow rates, based on process variables like yield. This model is integrated with techno-economic analysis software to explore economic sensitivities. Important design optimizations and tradeoffs are identified and quantified, including the relative cost imposed by rate slowdown from sugar inhibition versus the cost to remove and concentrate sugars at a lower concentration. It also identifies, high-leverage avenues for further exploration, such as increasing the maximum feasible solids concentration, and sustaining high membrane flux and reliability.

09 BIOMASS FUELS↗
DOE OSTI2023

Strategies for Achieving the DOE Hydrogen Shot Goal: Thermal Conversion Approaches

In July 2021 the United States (U.S.) Department of Energy (DOE) launched the first of a series of Department-wide Energy Earthshot goals designed to accelerate breakthroughs of more abundant, affordable, and reliable clean energy solutions within the decade. The Hydrogen Shot goal seeks to reduce the cost of clean hydrogen to $\$$1 per 1 kilogram in 1 decade ("1 1 1"). Today, thermal conversion of fossil fuels represents the predominant, lowest cost method of hydrogen production. In 2020 approximately 75 percent of global, dedicated hydrogen production was produced via fossil fuels using thermal conversion approaches such as steam reforming and gasification. However, carbon management techniques such as CO 2 capture and sequestration (CCS) and pyrolysis are not widely represented in the current fossil-based hydrogen production fleet. Lowering the cost of clean hydrogen production from commercial and advanced thermal conversion-based technologies is critical for successfully achieving the Hydrogen Shot goal. This report presents the findings from an initial screening analysis of several scenarios that explore cost drivers related to clean hydrogen production. The screening encompasses commercially available and developing thermal conversion technology alternatives as well as factors exogenous to the plant such as feedstock/byproduct pricing, CO 2 pipeline and storage infrastructure costs, and scale to assess potential pathways towards meeting the Hydrogen Shot goal. Additionally, this report presents initial Research and Development (R&D) strategies to advance thermal conversion technology towards meeting the Hydrogen Shot goal.

08 HYDROGEN↗