Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “color mapping”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44

New results for geologic units mapping of Utah test sites using Landsat TM data

This paper continues a study on the accuracy of geological mapping using Landsat Thematic Mapper data (Short, 1984). In June 1976, both the White Mountain alteration zone and the Waterpocket Fold sedimentary rock sites in Utah were surveyed by the Bendix 24-band scanner on a NASA NC-130B aircraft. Mid-June 1984 TM data for these two sites have been processed like the 1976 data to test the quality of simulation of TM data. Principal-components (PC) color composite images for White Mountain show close correspondence to the Bendix PC images. At this site carbonate strata are uniquely discriminated in both Bendix and TM composites that use an inverted PC 3 image. Alunite/kaolinite and hematite/limonite alteration zones developed on volcanic flows are also sharply separated, but iron oxide and silicified zones are less so. The accuracy of rock-units mapping at the Waterpocket Fold site by supervised classification of the June TM data is significantly better, reaching 70 percent in the best case, than for January 1983 data for that site.

Short, N. M.↗

Computer-implemented land use classification with pattern recognition software and ERTS digital data

Significant progress has been made in the classification of surface conditions (land uses) with computer-implemented techniques based on the use of ERTS digital data and pattern recognition software. The supervised technique presently used at the NASA Earth Resources Laboratory is based on maximum likelihood ratioing with a digital table look-up approach to classification. After classification, colors are assigned to the various surface conditions (land uses) classified, and the color-coded classification is film recorded on either positive or negative 9 1/2 in. film at the scale desired. Prints of the film strips are then mosaicked and photographed to produce a land use map in the format desired. Computer extraction of statistical information is performed to show the extent of each surface condition (land use) within any given land unit that can be identified in the image. Evaluations of the product indicate that classification accuracy is well within the limits for use by land resource managers and administrators. Classifications performed with digital data acquired during different seasons indicate that the combination of two or more classifications offer even better accuracy.

Joyce, A. T.↗

CARETS: A prototype regional environmental information system. Volume 12: User evaluation of experimental land use maps and related products from the central Atlantic test site

The user interaction and evaluation phase of the USGS/NASA Central Atlantic Regional Ecological Test Site was designed to obtain the input of local, regional, State, and Federal agency users of land-resource information into the development, of a regional information system; to provide users with assistance and data resulting from CARETS research; and to have user. organizations evaluate to what extent the CARETS products meet their needs. The evaluation of CARETS land use and related products revealed that most user agencies interviewed, at all governmental levels, require more detailed data than that provided by the CARETS project. Few agencies found utility in the generalized ERTS Level I land--use maps. Level II data, though reported valuable by several users, was generally considered of secondary utility by most users. The products considered most useful by users at all levels were the high--altitude color-infrared photographs and the USGS orthophotoquads. Recommendations resulting from the evaluation reflect the need to establish a flexible and reliable system for providing more detailed raw and processed land-resource information as well as the need to improve the methods of making information available to users.

Land-use planning↗

Reconnaissance mapping from aerial photographs

The author has identified the following significant results. Engineering soil and geology maps were successfully made from Pennsylvania aerial photographs taken at scales from 1:4,800 to 1:60,000. The procedure involved a detailed study of a stereoscopic model while evaluating landform, drainage, erosion, color or gray tones, tone and texture patterns, vegetation, and cultural or land use patterns.

Weeden, H. A.↗

Use of LANDSAT data to define soil boundaries in Carroll County, Missouri

Bands 4, 5 and 7 false color composite photographs were prepared using data from LANDSAT scenes acquired during April 1977 and April 1981 on computer compatible tapes, and these color composites were compared with band 7 black and white photographs prepared for the entire county. Delineations of soil boundaries at the soil association level were achieved using LANDSAT spectral reflectance data and slope maps for a portion of Carroll County, Missouri. Forty two spectral reflectance classes from April 1977 LANDSAT data were overlaid on digitized slope maps of nine USGS 7.5 minute series topographic quadrangle slope maps to achieve boundary delineations of the soil associations.

Davidson, S. E.↗

HCMM hydrological analysis in Utah

Data reduction and preliminary comparisons and correlations of Heat Capacity Mapping Mission data to ground truth measurements were made. The data covered Utah Lake and the surrounding area. Output modes include a digital hard copy record of the intensity value for each pixel and color graphics. Analyses of non-diatom net plankton (algae), turbidity, nitrogen, phosphorus, and temperatures were made. In addition, infrared data for the agricultural area around Utah lake were also preliminarily examined and compared to depth to groundwater data.

Source record↗

A video atlas of TOMS ozone data, 1978-88

The Total Ozone Mapping Spectrometer (TOMS), on-board NASA's Nimbus-7 weather satellite, has been observing ozone over the earth once daily for the last 10 yr. A time-lapse atlas of 3440 color-coded images drawn from the TOMS archive from 1978 to 1988 has been visualized on a standard VHS videotape that is now available from NASA. The rapid and complex ozone variations presented demonstrate the difficulty of separating man-induced climate changes from natural variability. This article presents a few images from the atlas and describes interesting features in the animation, such as the correlation between ozone and 'the weather', and the recent deepening of the annual ozone hole over the South Pole. Originally intended as a browsing tool for the TOMS digital database, the videotape is a vivid presentation of the earth's atmospheric dynamics and chemistry that is recommended for scientists, educators, policy makers, and citizens concerned about the global environment.

Chesters, D.↗

Infrared mapping of M82 - A starburst in an edge-on barred galaxy

New 1-30-micron images of the starburst galaxy M82 are presented. The appearance of M82 at 2 microns indicates that a bar about 1 kpc long is located at its center. This bar may dramatically influence the gas dynamics and may have caused the formation of the central gas and dust toroid associated with the luminous episode of star formation. The mid-IR maps define the structure of the toroid out to 30 microns and show that the extent of the emitting region is at least 1.3 kpc. The absorption optical depth determined from 1-2 micron colors corresponds to A(v) less than about 8 and is distributed in a ridge spanning the starburst region and closely resembling the distribution of H I optical depth. Finally, the contribution that very small grains may make to the 10-micron emission is considered, and it is concluded, by comparison to Galactic H II regions, that their mid-IR emission is significant.

Telesco, C. M.↗

Space Spurred Computer Graphics

Dicomed Corporation was asked by NASA in the early 1970s to develop processing capabilities for recording images sent from Mars by Viking spacecraft. The company produced a film recorder which increased the intensity levels and the capability for color recording. This development led to a strong technology base resulting in sophisticated computer graphics equipment. Dicomed systems are used to record CAD (computer aided design) and CAM (computer aided manufacturing) equipment, to update maps and produce computer generated animation.

Source record↗

Some examples of the utility of HCMM data in geologic remote sensing

Examples of HCMM (Heat Capacity Mapping Mission) data in geologic remote sensing are presented, and the data set is composed of HCMM and aircraft digital scanner data and ground truth data from four western U.S. test sites. Data are used in the thermal model to test thermal data effectiveness, and changes in temperature with depth and time for dry soils are described by the model. It is found that the HCMM thermal inertia image is useful in the separability of bedrock and alluvium in Death Valley, and aa and pahoehoe flows in the Pisgah basalt flow. In a color composite of HCMM day temperature, night temperature, and day visible images of the Pisgah Crater test site, it is possible to distinguish alluvium, playa, aa and pahoehoe basalt flow, rhyolite intrusives, and other elements. Ground checking of units at a few points will extend capabilities to large areas and assist in creating telegeologic maps.

Kahle, A. B.↗

Circularly Polarized Attosecond Pulses Enabled by an Azimuthal Phase and Polarization Grating

High-harmonic generation (HHG) is an extreme nonlinear optical process that can map the properties of an infrared driving laser beam onto short wavelength attosecond pulse trains. However, current techniques for generating circularly polarized high harmonics for probing magnetic materials and chiral systems have limitations: two-color collinear counter-rotating driving lasers result in a low cutoff photon energy, while single-color non-collinear counter-rotating schemes suffer from low conversion efficiency. In this work, we generate circularly polarized attosecond pulse trains by using a structured laser driver which has a rotating polarization and phase grating along the azimuthal coordinate. Furthermore, our experimental and numerical results demonstrate the production of left and right circularly polarized harmonics, which naturally separate upon propagation. Our approach uses a single laser color in a collinear geometry, that can be scaled for high efficiency. Simulations show this scheme can extend into the soft x-ray region when driven by mid-infrared driving lasers, while preserving the same high phase-matching cutoff photon energy as for linearly-polarized high harmonics.

attosecond science↗

Exponential Improvements in the Simulation of Lattice Gauge Theories Using Near-Optimal Techniques

We report a first-of-its-kind analysis on post-Trotter simulation of U(1), SU(2), and SU(3) lattice gauge theories including fermions in arbitrary spatial dimension. We provide explicit circuit constructions as well as T-gate counts and logical qubit counts for Hamiltonian simulation. We find a reduction of up to 25 orders of magnitude in space-time volume over Trotter methods for simulations of non-Abelian lattice gauge theories relevant to the standard model. This improvement results from our algorithm having polynomial scaling with the number of colors in the gauge theory, achieved by utilizing oracle constructions relying on the sparsity of physical operators, in contrast to the exponential scaling seen in state-of-the-art Trotter methods, which employ explicit mappings onto Pauli operators. Our work demonstrates that the use of advanced algorithmic techniques leads to dramatic reductions in the cost of simulating fundamental interactions, bringing it in step with resources required for first-principles quantum simulation of chemistry.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Phenology satellite experiment

The author has identified the following significant results. The detection of a phenological event (the Brown Wave-vegetation sensescence) for specific forest and crop types using ERTS-1 imagery is described. Data handling techniques including computer analysis and photointerpretation procedures are explained. Computer analysis of multspectral scanner digital tapes in all bands was used to give the relative changes of spectral reflectance with time of forests and specified crops. These data were obtained for a number of the twenty-four sites located within four north-south corridors across the United States. Analysis of ground observation photography and ERTS-1 imagery for sites in the Appalachian Corridor and Mississippi Valley Corridor indicates that the recession of vegetation development can be detected very well. Tentative conclusions are that specific phenological events such as crop maturity or leaf fall can be mapped for specific sites and possible for different regions. Preliminary analysis based on a number of samples in mixed deciduous hardwood stands indicates that as senescence proceeds both the rate of change and differences in color among species can be detected. The results to data show the feasibility of the development and refinement of phenoclimatic models.

Dethier, B. E.↗

An evaluation of the utility of ERTS-1 data for mapping and developing natural resources of Iran

The author has identified the following significant results. Results are reported in structural mapping leading to tectonic interpretation; in surficial deposits mapping; in analysis of salt diapirism in southwest Iran; in updating and correcting existing hydrological maps; in monitoring fluctuations of water in some intermittent lakes; in the delineation of wetland areas and the study of fluvial suspended load of the head of the Persian Gulf in relation to the fishing industry; in exercises in soil mapping; in range and agricultural surveys and inventory using multistage sampling methods, and in the computer analysis of ERTS-1 digital tapes for urban land use. The completion of a 1:1,000,000 false color photomosaic of Iran is also discussed.

Ebtehadj, K.↗

LACIE area sampling frame and sample selection

Transparent acetate overlays containing agricultural boundaries within each of the LACIE countries were prepared and registered to operational navigation charts (ONC's). Full frame LANDSAT color-infrared images of the same scale as the ONC's (1:1 million) were used to identify agricultural boundaries based on discernible agricultural field patterns. Preliminary steps taken in the preparation of the base map overlay, and the construction of an overlay of the base map physical features are described as well as the construction of the agricultural and nonagricultural delineation overlay.

Liszcz, C. J.↗

A search for radio emission from flare stars in the Pleiades

The VLA has been used to search for radio emission from flare stars in the Pleiades. Two observational strategies were employed. First, about 1/2 sq deg of cluster, containing about 40 known flare stars, was mapped at 1.4 GHz at two epochs. More than 120 sources with flux densities greater than 0.3 mJy exist on the maps. Detailed analysis shows that all but two of these sources are probably extragalactic. The two sources identified as stellar are probably not Pleiades members as judged by their proper motions; rather, based on their colors and magnitudes, they seem to be foreground G stars. One is a known X-ray source. The second observational strategy, where five rapidly rotating flare stars were observed at three frequencies, yielded no detections. The 0.3 mJy flux-density limit of this survey is such that only the most intense outbursts of flare stars in the solar neighborhood could have been detected if those stars were at the distance of the Pleiades.

Bastian, T. S.↗

OVIRS Visible to Near-IR Spectral Results at (101955) Bennu

The OSIRIS-REx Visible and InfraRed Spectrometer (OVIRS) operates over a wavelength range of ~0.4 to 4.3 μm with a 4-mrad field of view.During the OSIRIS-REx mission, OVIRS collected more than 500,000 spectra of Bennu for spectral characterization of the surface. Constant phase angle observations were dedicated to global mapping at ~20 m resolution. Data with higher resolution (2–4 m) were obtained of the candidate sample sites. We analyzed low-phase-angle (12:30 pm local solar time) global data for surface color trends, surface temperatures, and the band depths of absorption features associated with hydrated minerals, carbon-bearing materials, iron oxides, and pyroxenes.

A.A. Simon↗

Snow survey and vegetation growth in the Swiss Alps

The author has identified the following significant results. Analog processing of S190A and B color and infrared color transparencies showed that it is possible to evaluate the courses of the temporary snow line and the upper limit of vegetation growth over large areas. By transferring the results from S190A onto a topo-map 1:200,000, an accuracy of + or - 50 m could be achieved. With S190B transferred onto a map 1:100,000, an accuracy of + or - 20 m was reached. Digital processing of S192 multispectral data allowed a separation of snow and clouds by combining the information from channels 9, 15, and 18.

Haefner, H.↗