Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “characterizations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44

LeTID-Affected Cells from a Utility-Scale Photovoltaic System Characterized by Deep Level Transient Spectroscopy

Photovoltaic modules from a utility-scale field experienced power loss by light- and elevated temperature-induced degradation (LeTID). Samples of one of the affected monocrystalline silicon cells were cored and extracted from the module packaging and encapsulation. One of the cell fragments was processed using a regeneration cycle of applying short-circuit-rated current in forward bias at 85 degrees C for 2 weeks, while the other fragment was kept in its outdoor-degraded LeTID state. Both samples were scribed to form 2-mm diameter isolated areas using a femtosecond-pulse-width laser micromachining system. Both isolated areas contained front grid line segments which were wire bonded to larger contact pads, and the samples were probed in a cryostat linked to a deep-level transient spectroscopy (DLTS) system. Using DLTS, a majority-carrier, hole-trap defect was detected on each sample with an activation energy of 0.42 eV. The LeTID-degraded sample, however, had a larger signal corresponding to a trap density of 1.1x10^13 cm-3, which was about five times larger than the 2.1x10^12 cm-3 trap density of the regenerated sample.

charge carrier lifetime↗

Optical Characterization of Defects in High-Efficiency (Ag,Cu)(In,Ga)Se2

We applied time-resolved photoluminescence (TRPL) spectroscopy to study optimized chalcopyrite (Ag,Cu)(In,Ga)Se2 thin films. The device shows power conversion efficiency of 18.7%. The metastable defect VSe-VCu within ACIGS at EV+0.98 eV is detected in sub-bandgap TRPL excitation spectra. TRPL lifetime of 50 ns is limited by the density of mid-gap defects such as CuGa or CuIn. The similarity of TRPL dynamics before and after light soaking indicates the optimized ACIGS thin film is less metastable because the density of VCu-VSe defect is reduced to below 10^15 cm^-3. This study indicates that ACIGS has improved cell efficiency and reliability characteristics.

41 EE - Solar Energy Technologies Office (EE-4S)↗

Using Spectral Measurements to Characterize Solar Reference Cells on a Two-Axis Tracker

A study is commencing relating the spectral responsivity of reference cells in the field to changing spectral distribution during the day. Initial results indicate that measurements of the incident spectral distribution can be used to match results of reference cell measurements on a two-axis tracker with a standard deviation of ±0.25% under clear-sky conditions. Initial results are provided. As more data are obtained covering a variety of field conditions and locations, the robustness of these results will be tested. The website https://midcdmz.nrel.gov/apps/sitehome.pl?site=PVRES contains the data generated by this project.

41 EE - Solar Energy Technologies Office (EE-4S)↗

Characterization of Fissile Assemblies Using Low-Efficiency Detection Systems

Here, we have investigated the possibility that the amount, chemical form, multiplication, and shape of the fissile material in an assembly can be passively assayed using scintillator detection systems by only measuring the fast neutron pulse height distribution and distribution of time intervals Δt between fast neutrons. We have previously demonstrated that the alpha-ratio can be obtained from the observed pulse height distribution for fast neutrons. In this paper we report that we report that when the distribution of time intervals is plotted as a function of logΔt, the position of the correlated neutron peak is nearly independent of detector efficiency and determines the internal relaxation rate for fast neutrons. If this information is combined with knowledge of the alpha-ratio, then the position of the minimum between the correlated and uncorrelated peaks can be used to rapidly estimate the mass, multiplication, and shape of fissile material. This method does not require a priori knowledge of either the efficiency for neutron detection or the alpha-ratio. Although our method neglects 3-neutron correlations, we have used previously obtained experimental data for metallic and oxide forms of Pu to demonstrate that our method yields good estimates for multiplications as large as 2, and that the only constraint on detector efficiency/observation time is that a peak in the interval time distribution due to correlated neutrons is visible.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Uncertainty Characterization of Silicon Damage Metrics

Here, a general formulation of silicon damage metrics and associated energy-dependent response functions relevant to the radiation effects community is provided. Using this formulation, a rigorous quantitative treatment of the energy-dependent uncertainty contributors is performed. This resulted in the generation of a covariance matrix for the displacement kerma, the NRT-based damage energy, and the 1-MeV(Si) equivalent damage function. Lastly, when a careful methodology is used to apply a reference 1-MeV damage value, the systematic uncertainty in the fast fission region is seen to be removed and the uncertainty for integral metrics in broad-based fission-based neutron fields is demonstrated to be significantly reduced.

1-MeV(Si)↗

High Chrome Refractory Characterization: Part II . Accumulation of Spinel Corrosion Deposits in Radioactive Waste Glass Melters

High Cr 2 O 3 containing Monofrax ™ K‐3 is a robust refractory that is used in radioactive waste glass melters worldwide. Monofrax ™ K‐3 contains highly reduced phases. Conversely, many of the radioactive feeds being processed are highly oxidizing. The K‐3 refractory corrosion rates in oxidizing (high nitrate) feeds were ~1.8–2.8 times higher than the rates determined using reducing feeds. The corrosion product formed is a mixture of spinel and glass (slag) that can accumulate on the melter floor. A methodology to calculate the depth of slag deposits from refractory corrosion is presented and verified with slag measurements from the Defense Waste Processing Facility ( DWPF ) melter after it had processed oxidized feeds for 1.75 years. The calculations show that had the facility continued to process oxidized feeds the melter lifetime (based on when the deposits could have reached and blocked the pour spout riser) would have been ~4.5 years. The DWPF changed to a reducing flow sheet after ~3 years of operation. The lifetimes of Melter #1 and Melter #2, assuming a failure due to pour spout blockage, are calculated as 7.7–12 years based on corrosion rates measured with reducing feeds. Lifetimes of 9 and >11 years have actually been achieved.

Jantzen, Carol M.↗

High Chrome Refractory Characterization: Part I. Impact of Melt Reduction/Oxidation on the Corrosion Mechanism

High Cr 2 O 3 containing Monofrax ™ K‐3 is a robust refractory that is used in the fiberglass industry and used in radioactive waste glass melters worldwide. Monofrax ™ K‐3 is tolerant of transition metal oxides but contains highly reduced solid solutions of spinels, that is, (Mg,Fe 2+ )(Al,Cr) 2 O 3 . Conversely, many of the waste feeds being processed are highly oxidizing. The K‐3 refractory corrosion was tested in sealed crucibles starting with slurried melter feed instead of prereacted glass called for by ASTM C621. Testing the refractory coupon during the feed‐to‐glass conversion exposes the refractory to the oxidizing and reducing species being released during vitrification, for example, NO 3 − , NO 2 − , CO 2 , CO , O 2 . Corrosion rates measured in highly oxidizing (high nitrate) feeds were ~1.8–2.8 times higher than those determined using prereacted glass or reduced feeds. Confirmatory corrosion rates were measured on Monofrax ™ K‐3 coupons immersed in oxidizing feed in a 1/100th‐scale HLW pilot‐scale melter. Corrosion is heterogeneous or incongruent as Ni and Fe in the waste glass exchange with Mg and Al in the refractory. An insoluble NiFe 2 O 4 spinel corrosion product is formed that can build up a protective layer along the refractory walls or spall and settle to the melter floor depending on melt pool convection/agitation.

Jantzen, Carol M.↗

Characterizing the Influence of Abstraction in Full-Scale Wind Turbine Nacelle Testing

In recent years, there has been a growing interest in full-scale wind turbine nacelle testing to complement individual component testing. As a result, several wind turbine nacelle test benches have been built to perform such testing with the intent of loading the integrated components as they are in the field. However, when mounted on a test bench the nacelle is not on the top of a tower and does not have blades attached to it - this is a form of abstraction. This paper aims to quantify the influence of such an abstraction on the dynamic response of the nacelle through a series of simulation case studies. The responses of several nacelle components are studied including the main bearing, main shaft, gearbox supports, generator, and yaw bearing interface. Results are presented to highlight the differences in the dynamic response of the nacelle caused by the abstraction. Additionally, the authors provide recommendations for mitigating the effects of the abstraction.

17 WIND ENERGY↗