SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Changes in the regional scale parameters used to characterize the nature of area transformation caused by the California State Water Project are analyzed. Data were taken from Mission 164 and ERTS high flight simulation imagery. Indicators considered cover general and urban oriented land use, general and problem oriented vegetation, irrigation systems, and identification of crops.
The nature of postirradiation repair in the livers of rats irradiated during hypokinesia is investigated. Hepatocyte population counts, mitotic activity, binuclear cell content, and karyometric studies were done to ascertain the effects of combined hypokinesia and radiation. Hypokinesia is shown to change the nature and rate of post-irradiation changes in the liver, the effect varying with the timing of irradiation relative to the length of hypokinesia. It is concluded that the changes in the compensatory and restorative processes are caused by stress developed in response to isolation and restricted mobility. By changing neuroendocrine system activity, the stress stimulates cell and tissue repair mechanisms at a certain stage essential to the body's reaction of subsequent irradiation.
Climate modeling based on numerical solution of the fundamental equations for atmospheric structure and motion permits the explicit modeling of physical processes in the climate system and the natural treatment of interactions and feedbacks among parts of the system. The main difficulty concerning this approach is related to the computational requirements. The present investigation is concerned with the development of a grid-point model which is programmed so that both horizontal and vertical resolutions can easily be changed. Attention is given to a description of Model I, the performance of sensitivity experiments by varying parameters, the definition of an improved Model II, and a study of the dependence of climate simulation on resolution with Model II. It is shown that the major features of global climate can be simulated reasonably well with a horizontal resolution as coarse as 1000 km. Such a resolution allows the possibility of long-range climate studies with moderate computer resources.
Interdisciplinary analysis capabilities have been developed for aeroservoelastic aircraft and large flexible spacecraft, but the requisite integrated design methods are only beginning to be developed. One integrated design method which has received attention is based on hierarchal problem decompositions, optimization, and design sensitivity analyses. This paper highlights a design sensitivity analysis method for Linear Quadratic Gaussian (LQG) optimal control laws, enabling the use of LQG techniques in the hierarchal design methodology. The LQG sensitivity analysis method calculates the change in the optimal control law and resulting controlled system responses due to changes in fixed design integration parameters using analytical sensitivity equations. Numerical results of a LQG design sensitivity analysis for a realistic aeroservoelastic aircraft example are presented. In this example, the sensitivity of the optimal control law and aircraft response for various parameters such as wing bending natural frequency is determined. The sensitivity results computed from the analytical expressions are used to estimate changes in response resulting from changes in the parameters. Comparisons of the estimates with exact calculated responses show they are reasonably accurate for + or - 15 percent changes in the parameters. Evaluation of the analytical expressions is computationally faster than equivalent finite difference calculations.
Interdisciplinary analysis capabilities have been developed for aeroservoelastic aircraft and large flexible spacecraft, but the requisite integrated design methods are only beginning to be developed. One integrated design method which has received attention is based on hierarchal problem decompositions, optimization, and design sensitivity analyses. This paper highlights a design sensitivity analysis method for Linear Quadratic Gaussian (LQG) optimal control laws, enabling the use of LQG techniques in the hierarchal design methodology. The LQG sensitivity analysis method calculates the change in the optimal control law and resulting controlled system responses due to changes in fixed design integration parameters using analytical sensitivity equations. Numerical results of an LQG design sensitivity analysis for a realistic aeroservoelastic aircraft example are presented. In this example, the sensitivity of the optimal control law and aircraft response for various parameters such as wing bending natural frequency is determined. The sensitivity results computed from the analytical expressions are used to estimate changes in response resulting from changes in the parameters. Comparisons of the estimates with exact calculated responses show they are reasonably accurate for + or - 15 percent changes in the parameters. Evaluation of the analytical expressions is computationally faster than equivalent finite difference calculations.
Single-event upsets (SEUs) pose great threats to avionic systems state machine control logic, which are frequently used to control sequence of events and to qualify protocols. The risks of SEUs manifest in two ways: (a) the state machine s state information is changed, causing the state machine to unexpectedly transition to another state; (b) due to the asynchronous nature of SEU, the state machine's state registers become metastable, consequently causing any combinational logic associated with the metastable registers to malfunction temporarily. Effect (a) can be mitigated with methods such as triplemodular redundancy (TMR). However, effect (b) cannot be eliminated and can degrade the effectiveness of any mitigation method of effect (a). Although there is no way to completely eliminate the risk of SEU-induced errors, the risk can be made very small by use of a combination of very fast state-machine logic and error-detection logic. Therefore, one goal of two main elements of the present method is to design the fastest state-machine logic circuitry by basing it on the fastest generic state-machine design, which is that of a one-hot state machine. The other of the two main design elements is to design fast error-detection logic circuitry and to optimize it for implementation in a field-programmable gate array (FPGA) architecture: In the resulting design, the one-hot state machine is fitted with a multiple-input XNOR gate for detection of illegal states. The XNOR gate is implemented with lookup tables and with pipelines for high speed. In this method, the task of designing all the logic must be performed manually because no currently available logic synthesis software tool can produce optimal solutions of design problems of this type. However, some assistance is provided by a script, written for this purpose in the Python language (an object-oriented interpretive computer language) to automatically generate hardware description language (HDL) code from state-transition rules.
Although charged particles in space have been detected with radiation detectors on board spacecraft since the early discovery of the Van Allen Belt, reports on effects of direct exposure to space radiation in biological systems have been limited. Measurement of biological effects of space radiation has been difficult due to the low dose and low dose rate nature of the radiation environment, and the difficulty in separating the radiation effects from microgravity and other space environmental factors. In astronauts, only a small number of changes, such as increased chromosome aberrations in lymphocytes and early onset of cataracts, attributed primarily to the exposure to space radiation. In a recent experiment, human fibroblast cells were flown on the International Space Station (ISS). Cells fixed on Days 3 and 14 after reaching orbit were analyzed for phosphorylation of a histone protein H2AX by immunofluorescent staining of cells, which is a widely used marker for DNA double strand breaks. The 3-dimensional gamma-H2AX foci were captured with a laser confocal microscope. Quantitative analysis revealed a small fraction of foci that were larger and displayed a track pattern in the flight samples in comparison to the ground control. Human fibroblast cells were also exposed to low dose rate gamma rays, as well as to protons and Fe ions. Comparison of the pattern and distribution of the foci after gamma ray and charged particle exposure to our flight results confirmed that the foci found in the flown cells were indeed induced by space radiation.
The National Ignition Facility (NIF) uses crystal optics made from Potassium Di-Hydrogen Phosphate (KDP) for frequency conversion, changing the fundamental wavelength of 1053 nm to the third harmonic at 351 nm. The crystal optics are manufactured at a vendor and shipped to Lawrence Livermore National Laboratory (LLNL) where they are measured, mitigated, cleaned, coated, and placed into line replaceable units (LRUs) in the Optics Processing Facility (OPF) clean room and transported to the NIF where they are stored under Nitrogen purge until they are installed in the beamline. The KDP crystal optics are sensitive to humidity and temperature, so they are stored under Nitrogen purge providing a clean and dry environment. The sensitivity to the environment and the brittle nature of the crystals makes transportation and handling (T&H) challenging. Coupled with challenges in holding the crystal optics in the LRU to not distort the optic, there is a balance between T&H and fixturing the optic in the laser system. The purpose of the LRU is to make the optics interchangeable allowing for a relatively quick interchange. Kinematic mounts and ceramic frames aid in making this possible. Optics in the NIF that are frequently changed out have an established recycle loop. The loop for an optic can be complex depending on the amount of processing and rework necessary. Some optics can’t be reconditioned so they are replaced with new optics.
In the United States, the building sector accounts for 40% of all energy use, and buildings are responsible for more than two-thirds of electricity consumption. Buildings remain the major driver of energy-related carbon emissions, and such emissions are projected to increase in the years ahead because of urbanization and population growth. To accomplish the low carbon energy goal in the building sector, phase change material (PCM)–based thermal energy storage (TES) is increasingly being adopted because it offers several advantages, such as reducing building peak load and energy consumption, enabling large scale deployment of renewables, and improving grid stability. The integration of TES with thermally anisotropic building envelopes (TABEs) is a promising solution because, TABE can redirect natural thermal energy from a building using hydronic loops to TES, and the stored energy can be used later for heating and cooling applications. In this study, we experimentally investigate the thermal performance of a novel fin-tube heat exchanger TES system designed for potential integration with a TABE. An experimental rig for a 5-gal PCM fin-tube heat exchanger system with water as the heat transfer medium is described which records temperatures at the heated and cooled boundaries of the system. Experimental observations provide insight into the role a TES system can play in offsetting a building’s heating and cooling demand and also offer a means to characterize the performance of PCMs for building applications. The scale and study presented in this work will help in the design of future thermal storage systems optimized for storage capacity while also accounting for overall system costs for building applications.
Understanding and managing systemic risk is more important than ever due to our immense global connectivity (e.g., between sectors, such as food-health-water-energy, countries and continents, down to individuals). Despite the fact that the notion of systemic risk is several decades old, the term is used in diverse ways across different disciplines (e.g., financial systems, medicine, earth system sciences, disaster risk research and climate science). Triggered by the repercussions of the global financial crisis of the late 2000s, and more recently the COVID-19 pandemic, which are clear realization of systemic risk, the perception of systemic risk has often been focused on global and catastrophic or even existential risks. Systemic risk, however, can be seen as a feature of systems at all possible scales (e.g., global, national, regional, local) with system boundaries varying depending on the context. Addressing current societal challenges, such as climate change, in terms of systemic risk requires integrating different systems perspectives and fostering system thinking, while implementing key intergovernmental agendas, such as the Paris Agreement, the Sendai Framework for Disaster Risk Reduction and the Sustainable Development Goals. Based on insights gained and knowledge collected from an expert workshop, literature review and expert elicitation, we give an integrated perspective of climate, environmental and disaster risk science and practice on systemic risk as summarized in a Briefing Note to the International Science Council. We provide an overview of concepts of systemic risk that have evolved over time and identify commonalities across terminologies and perspectives associated with systemic risk used in different contexts. Key attributes of systemic risk are outlined without prescribing a single definition, and information and data requirements are discussed that are essential for a better and more actionable understanding of the systemic nature of risk. Finally, the opportunities to connect research and policy for addressing systemic risk are highlighted.
We present experimental results and a validated numerical model of a dual-circuit phase-change thermal energy storage module for air conditioners. The module incorporates a phase-change material encapsulated in compressed expanded natural graphite foam. We used n-tetradecane as the PCM with a transition temperature (~4.5 °C) suitable for air-conditioning applications. Heat exchange to and from the module is accomplished through two fluid loops operating as a heat source and sink embedded inside multiple slabs of the composite material. This dual-circuit design enables easier integration with air-conditioning equipment and provides enhanced flexibility in system operation as compared to the state-of-the-art thermal storage systems. When integrated with an air-conditioner, this design will enable peak-load shaving and enhances operational efficiency. The thermal storage device was designed for a nominal storage capacity of ~ 3.5 kWh. We evaluated the heat transfer and energy storage performance of this device using standalone heat transfer experiments to estimate key thermal resistances and identify design improvements before integration with an air conditioner. The numerical model of the heat exchanger uses a combination of discretized and lumped parameter approaches to maintain a balance between accuracy and computational expense. Our analyses show that the geometric features and integration of fluid tubes are key contributors to the thermal contact resistance between the fluid and the thermal storage material, and consequently, to the overall performance of the thermal storage module. Our standalone experiments also identified important operating scenarios in which this thermal storage module can be used for air-conditioning in buildings.
Although methods in the design-build-test life cycle of the synthetic biology field have grown rapidly, the expansion has been non-uniform. The design and build stages in development have seen innovations in the form of biological CAD and more efficient means for building DNA, RNA, and other biological constructs. The testing phase of the cycle remains in need of innovation. Presented will be both a theoretical abstraction of biological measurement and a practical demonstration of a microfluidics-based platform for characterizing synthetic biological phenomena. Such a platform demonstrates a design of additive manufacturing (3D printing) for construction of a microbial fuel cell (MFC) to be used in experiments carried out in space. First, the biocompatibility of the polypropylene chassis will be demonstrated. The novel MFCs will be cheaper, and faster to make and iterate through designs. The novel design will contain a manifold switchingdistribution system and an integrated in-chip set of reagent reservoirs fabricated via 3D printing. The automated nature of the 3D printing yields itself to higher resolution switching valves and leads to smaller sized payloads, lower cost, reduced power and a standardized platform for synthetic biology unit tests on Earth and in space. It will be demonstrated that the application of unit testing in synthetic biology will lead to the automatic construction and validation of desired constructs. Unit testing methodologies offer benefits of preemptive problem identification, change of facility, simplicity of integration, ease of documentation, and separation of interface from implementation, and automated design.
This innovation proposes the reconciliation of the evolution of life with the second law of thermodynamics via the introduction of the First Principle for modeling behavior of living systems. The structure of the model is quantum-inspired: it acquires the topology of the Madelung equation in which the quantum potential is replaced with the information potential. As a result, the model captures the most fundamental property of life: the progressive evolution; i.e. the ability to evolve from disorder to order without any external interference. The mathematical structure of the model can be obtained from the Newtonian equations of motion (representing the motor dynamics) coupled with the corresponding Liouville equation (representing the mental dynamics) via information forces. All these specific non-Newtonian properties equip the model with the levels of complexity that matches the complexity of life, and that makes the model applicable for description of behaviors of ecological, social, and economical systems. Rather than addressing the six aspects of life (organization, metabolism, growth, adaptation, response to stimuli, and reproduction), this work focuses only on biosignature ; i.e. the mechanical invariants of life, and in particular, the geometry and kinematics of behavior of living things. Living things obey the First Principles of Newtonian mechanics. One main objective of this model is to extend the First Principles of classical physics to include phenomenological behavior on living systems; to develop a new mathematical formalism within the framework of classical dynamics that would allow one to capture the specific properties of natural or artificial living systems such as formation of the collective mind based upon abstract images of the selves and non-selves; exploitation of this collective mind for communications and predictions of future expected characteristics of evolution; and for making decisions and implementing the corresponding corrections if the expected scenario is different from the originally planned one. This approach postulates that even a primitive living species possesses additional, non-Newtonian properties that are not included in the laws of Newtonian or statistical mechanics. These properties follow from a privileged ability of living systems to possess a self-image (a concept introduced in psychology) and to interact with it. The proposed mathematical system is based on the coupling of the classical dynamical system representing the motor dynamics with the corresponding Liouville equation describing the evolution of initial uncertainties in terms of the probability density and representing the mental dynamics. The coupling is implemented by the information-based supervising forces that can be associated with self-awareness. These forces fundamentally change the pattern of the probability evolution, and therefore, lead to a major departure of the behavior of living systems from the patterns of both Newtonian and statistical mechanics. This innovation is meant to capture the signature of life based only on observable behavior, not on any biochemistry. This will not prevent the use of this model for developing artificial living systems, as well as for studying some general properties of behavior of natural, living systems.
Mutualisms are ubiquitous in natural systems, but less is known about how these positive interactions influence species distributions compared with antagonistic interactions, such as competition and predation. The niche concept is one useful approach for thinking about factors that shape species ranges, which we apply here towards understanding how the nature of plant-mycorrhizal symbioses change across large environmental gradients. We used a continuous niche mapping approach to examine how two ectomycorrhizal fungi (Thelephora terrestris, Suillus pungens) impact pine seedling growth across a two-dimensional soil nitrogen (N) and phosphorus (P) gradient. We found that ectomycorrhizal fungi improved plant growth most in nutrient addition treatments with highly imbalanced N:P ratios, demonstrating that mycorrhizal benefits depend on interactions between niche axes. Nevertheless, T. terrestris (highN:lowP) and S. pungens (lowN:highP) benefited plants most at opposite ends of the resource ratio spectrum, consistent with niche partitioning and functional specialization. While ectomycorrhizal fungi are often thought of as being most beneficial for nitrogen uptake, our results suggest that members of the Thelephoraceae may specialize in improving plant P uptake. Ectomycorrhizal colonization by a single fungus increased plant niche volume (calculated as convex hull volumes of plant growth response surfaces across N and P gradients) compared to non-mycorrhizal control plants and shows the overall positive effects of mutualisms on plant niche volume. Despite plant host benefits in S. pungens and T. terrestris single species treatments, the presence of both fungi together decreased plant niche volume. The lack of functional complementarity, despite functional specialization, indicates that in some environments, either fungal competition or the cost of maintaining a suboptimal mycorrhizal partner can limit the benefits of a higher quality partner. The niche mapping approach we present has the potential to answer fundamental questions about the dimensions of functional diversity in ectomycorrhizal fungi and the distributions of mycorrhizal symbioses.
Single-atom catalysts (SACs) have garnered significant interest due to their ability to reduce metal particles to the atomic scale, enabling finely tunable local environments and enhanced catalytic properties in terms of reactivity and selectivity. Despite this potential, their application has largely been confined to small-molecule transformations as metal-catalyzed reaction. Here, in this study, we present a diverse single-atom nickel (Ni) catalyst established via a nanoporous carbon (NPC) supported practice. This catalyst represents a breakthrough by achieving the bond formation between carbon and nitrogen and interfacial dynamics in the SAC. The present first principle-based density functional simulations establish the reaction dynamics and catalytic behaviour of such SAC. This dynamic nature comprises an exclusive nitrogen intercalated site showing excellent base effects. This base quickly tunes the interfacial atmosphere, enabling dynamic movement of adatoms into the NPC species, significantly changing the reaction path in Ni SACs due to superior steric effects. The research demonstrates that SACs can extend the capabilities of catalytic systems to include a wider range of complex reactions, offering substantial promise for the development of new, efficient synthetic methods for creating value-added molecular products.
The constantly evolving nature of the grid is compelling the design process of Remedial Action Schemes (RAS) to keep up with the changes. This document proposes a flexible and computationally efficient approach to automatically determine RAS corrective actions that alleviate line overloading violations. Statistical and functional characteristics summarized from RAS implemented in real power systems are used to guide the design parameters. This report also leverages sensitivity-based techniques to determine corrective actions for specific contingencies quickly without repeated numerical simulations. Finally, future directions for implementing this approach for a fully automated, online RAS are discussed.
Hurricanes Ian and Nicole caused devastating destruction across Florida in September and November 2022, leaving widespread damage in their wakes. This study focuses on the assessment of barrier islands’ shorelines, encompassing natural sand dunes and dune vegetation as well as armored dunes with man-made infrastructure such as seawalls. High-resolution satellite imagery from Planet was used to assess the impacts of these hurricanes on the beach shorelines of Volusia, Flagler, and St. Johns Counties on the Florida Central East Coast. Shorefront vegetation was classified into two classes. Normalized Difference Vegetation Index (NDVI) values were calculated before the hurricanes, one month after Hurricane Ian, one month after Hurricane Nicole, and one-year post landfall. LiDAR (Light Detection and Ranging) was incorporated to calculate vertical changes in the shorelines before and after the hurricanes. The results suggest that natural sand dunes were more resilient as they experienced less impact to vegetation and elevation and more substantial recovery than armored dunes. Moreover, the close timeframe of the storm events suggests a compound effect on the weakened dune systems. This study highlights the importance of understanding natural dune resilience to facilitate future adaptive management efforts because armored dunes may have long-term detrimental effects on hurricane-prone barrier islands.
The effects of air velocity on metabolic performance are studied by using high forced airflow in a closed environment as a mechanism to control the concentration of volatile animal wastes. Air velocities between 100 and 200 ft/min are without significant effects on the metabolism of rats. At velocities of 200 ft/min and above, oxygen consumption and CO2 production as well as food consumption increase. In most instances, the changes are on the order of 5-10%. At the same time, the RQ for the animals increases slightly and generally correlates well with oxygen consumption and CO2 production. Experiments on the nature of inert gas narcosis show that halothane and methoxyflurane are rather potent inhibitors of the NADH:O2 oxidoreductase system in rats. These experiments suggest that the mechanism of inert gas narcosis is not mandatorily related to a membrane surface phenomenon.