Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “binding”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44

Sulfur at nickel-alumina interfaces - Molecular orbital theory

Previous studies on Al-Ni alloys containing sulfur as an impurity suggest that, when S is in the interface between a metal and an oxide scale, it weakens the chemical bonding between them. This paper investigates factors responsible for this effect, using a molecular orbital theory to predict sulfur structures and electronic properties on the Ni-Al2O3 interface. It is shown that, in absence of S, the basal plane of Al2O3 will bind strongly through the Al(3+) cation surface to Ni (111). When segregated S impurity is present on the Ni surface, there are too few interfacial AlS bonds to effect good adhesion, leading to an inhibition of the oxide scale adhesion in NiCrAl alloys.

Hong, S. Y.↗

Vibrations in small Mg clusters

The equilibrium geometries, binding energies, and harmonic frequencies of Mg3 and Mg4 have been determined using large atomic natural orbital basis sets in conjunction with high levels of electron correlation. The correlation treatments comprise multireference configuration interaction (MRCI), singles and doubles coupled-cluster (CCSD) theory and the CCSD(T) extension that includes a perturbational estimate of connected triple excitations. As with previous studies of small Be clusters, the CCSD(T) method is found to reproduce the MRCI results with a remarkable degree of accuracy and at a fraction of the computational cost. Using the CCSD(T) method, full quartic force fields for Mg3 and Mg4 have been determined and anharmonic analyses have been performed using second-order perturbation theory. Vibration-rotation interaction constants and centrifugal distortion constants have also been determined.

Lee, Timothy J.↗

Theoretical study of the spectroscopy of NO(+)

The spectroscopy of the NO(+) molecule has been studied using multireference configuration-interaction calculations. The peak at 21.7 eV in the photoelectron spectrum of NO is assigned to the (2) 3Pi state (c 3Pi) and the vibrational progression centered at 23.1 eV is assigned to the diabatic (3) 1Pi state (B 1Pi). Several additional bound states with binding energies in excess of 1 eV are characterized in the present work. Radiative lifetimes are presented for many of the states.

Partridge, Harry↗

Oligomerization reactions of deoxyribonucleotides on montmorillonite clay - The effect of mononucleotide structure, phosphate activation and montmorillonite composition on phosphodiester bond formation

The 2(prime)-d-5(prime)-GMP and 2(prime)-d-5(prime)-AMP bind 2 times more strongly to montmorillonite 22A than do 2(prime)-d-5(prime)-CMP and 5(prime)-TMP. The dinucleotide d(pG)2 forms in 9.2 percent yield and the cyclic dinucleotide c(dpG)2 in 5.4 percent yield in the reaction of 2(prime)-d-5(prime)-GMP with EDAC in the presence of montmorillonite 22A. The yield of dimers which contain the phosphodiester bond decreases as the reaction medium is changed from 0.2 M NaCl to a mixture of 0.2 M NaCl and 0.075 M MgCl2. A low yield of d(pA)2 was observed in the condensation reaction of 5(prime)-ImdpA on montmorillonite 22A. The yield of d(pA)2 obtained when EDAC is used as the condensing agent increases with increasing iron content of the Na(+)-montmorillonite used as catalyst. Evidence is presented which shows that the acidity of the Na(+)-montmorillonite is a necessary but not sufficient factor for the montmorillonite catalysis of phosphodiester bond formation.

Ferris, James P.↗

The development of an alternative thermoplastic powder prepregging technique

Discussed is a novel powder prepregging technique that is based on the deposition of the powder onto fibers that have been moistened using an ultrasonic humidifier. The moisture acts as an initial binding agent for the powder until the powder can be melted onto the fiber in a subsequent heating step. LaRC-TPI powder, produced by Mitsui Toastsu, and Hercules AS-4 fiber served as the process development material system. The influence of powder particle size on this process, and the quality of the resulting composite are discussed.

Ogden, A. L.↗

Global Expression for Representing Diatomic Potential-Energy Curves

A three-parameter expression that gives an accurate fit to diatomic potential curves over the entire range of separation for charge transfers between 0 and 1. It is based on a generalization of the universal binding-energy relation of Smith et al. (1989) with a modification that describes the crossover from a partially ionic state to the neutral state at large separations. The expression is tested by comparison with first-principles calculations of the potential curves ranging from covalently bonded to ionically bonded. The expression is also used to calculate spectroscopic constants form a curve fit to the first-principles curves. A comparison is made with experimental values of the spectroscopic constants.

Ferrante, John↗

Near-critical spherical accretion by neutron stars - General relativistic treatment

Time-independent spherical accretion by a neutron star is studied using general relativistic radiation hydrodynamics. Numerical integrations of the flow equations are presented. These show that when the luminosity is sufficiently close to (but below) the Eddington limit, the flow velocity increases with decreasing radius far from the neutron star, reaches a maximum at an intermediate radius, and decreases at small radii. A large fraction of the binding energy of the flow is transferred to the radiation through scattering before the flow strikes the surface of the neutron star. Following Miller's treatment of accretion at luminosites near the Eddington limit (which neglected general relativistic effects), analytic approximations for the decelerating phase of the flow's velocity profile are derived. The dependence of the solutions on the variable Eddington factor prescription chosen to close the radiation moment equations is also examined.

Park, Myeong-Gu↗

Theoretical study of the bonding of Sc, Y, and La singly charged and dipositive ions to C2H2, C2H4, and C3H6

The interaction of the Sc and Y singly-charged and dipositive ions with C2H2, C2H4, and C3H6 is studied using electronic structure calculations that include high levels of electron correlation. These results are compared with comparable calculations performed previously for La(+) and La(2+). For C2H2 and C2H4, all three metal ions insert into the C-C pi bond, making a three-membered ring. The optimal structures for the MC3H6(+) ions all involve rearrangement to make a four-membered ring. The strength of the metal-ligand bond for the singly charged ions follows the order La greater than Sc equal to about Y. In contrast, the bonds involving the dipositive ions are electrostatic, so that the binding energy increases as the size of the ion decreases, leading to the trend Sc greater than Y greater than La.

Bauschlicher, Charles W., Jr.↗

Adhesion at metal interfaces

A basic adhesion process is defined, the theory of the properties influencing metallic adhesion is outlined, and theoretical approaches to the interface problem are presented, with emphasis on first-principle calculations as well as jellium-model calculations. The computation of the energies of adhesion as a function of the interfacial separation is performed; fully three-dimensional calculations are presented, and universality in the shapes of the binding energy curves is considered. An embedded-atom method and equivalent-crystal theory are covered in the framework of issues involved in practical adhesion.

Banerjea, Amitava↗

LaRC-TPI 1500 composites fabricated using an aqueous slurry process

Unidirectional composites from unsized carbon fiber and LaRC-TPI matrix material were fabricated using 'high flow' and'medium flow' grades of the LaRC-TPI 1500 series of polyimides. Prepreg was drum-wound from a slurry composed of the polyimide powder dispersed in an aqueous solution of LaRC-TPI poly(amide acid). The poly(amide acid) was found to be an effective binding agent in the prepregging process. Composite short beam shear and flexure properties were measured at room and elevated temperatures (to 177 C) with both dry and moisture-saturated specimens. The mechanical properties observed for composites fabricated from the high and medium flow materials were virtually identical. Additionally, double cantilever beam measurements showed nearly equivalent fracture toughness for the two composite materials.

Towell, Timothy W.↗

Cyclic AMP-receptor proteins in heart muscle of rats flown on Cosmos 1887

The cellular compartmentalization of the cyclic AMP-receptor proteins in heart ventricular tissue obtained from rats flown on the Cosmos 1887 is determined. Photoaffinity labeling of soluble and particular cell fractions with a (32P)-8-azido analog of cyclic AMP is followed by electrophoretic separation of the proteins and by autoradiographic identification of the labeled isoforms of cAPK R subunits. It is shown that RII in the particulate subcellular fraction was significantly decreased in heart cells from rats in the flight group when compared to controls. Protein banding patterns in both the cytoplasmic fraction and in a fraction enriched in chromatin-bound proteins exhibited some variability in tissues of individual animals, but showed no changes that could be directly attributed to flight conditions. No significant change was apparent in the distribution of RI or RII cyclic AMP binding in the soluble fractions. It is inferred that the cardiac cell integrity or its protein content is not compromised under flight conditions.

Mednieks, Maija I.↗

Universal energy relations and metal/ceramic interfaces

Known general relationships between pertinent variables are applied to investigate metal-ceramic interfaces. The adhesive energy is determined. The electronic exchange-correlation energy is found to be the dominant attractive term in the total energy. Results for the adhesive energy are obtained for junctions of all combinations of the low index surfaces of Al,Na, Mg, and Zn. This leads to a variety of curves, all with a single minimum of separation and equilibrium binding energy. Scaling results for 10 contacts fall closely onto a single curve, a universal energy relation for adhesion. The scaled chemisorption curves fall accurately on the same universal form that was found for adhesion. For the case of cohesion, all-first principle results are scaled and again all scaled curves for a variety of metals fall accurately on the universal form for adhesion and chemisorption. An intimate relationship between the energetics of solids and molecules is inferred.

Smith, John R.↗

Two-Axis Track Rollers

Compact, lightweight design reduces side friction. Set of proposed two-axis track rollers enables sliding door to follow curved track in both directions without binding. Combination of cylindrical cam-follower-type roller and large ball end roller. Intended for use on sliding hatch covers on proposed Space Station Freedom, also useful on Earth to ensure ease and reliability of motion in sliding doors, windows, covers, and partitions.

Melinick, John M.↗

Floating Ring-Groove Lapper

Tool fits out-of-round seal groove and laps it to fine finish without binding. Includes floating lapping pieces riding freely in groove, and are curved to match nominal diameter of groove. One lapping piece tightened so it does not move relative to disk.

Williams, Robert L., Sr.↗

Structure and functions of water-membrane interfaces and their role in proto-biological evolution

Among the most important developments in proto-biological evolution was the emergence of membrane-like structures. These are formed by spontaneous association of relatively simple amphiphilic molecules that would have been readily available in the primordial environment. The resulting interfacial regions between water and nonpolar interior of the membrane have several properties which made them uniquely suitable for promoting subsequent evolution. They can (1) selectively attract organic material and mediate its transport, (2) serve as simple catalysts for chemical reactions, and (3) promote the formation of trans-membrane electrical and chemical gradients which could provide energy sources for proto-cells. Understanding the structure of interfaces, their interactions with organic molecules and molecular mechanisms of their functions is an essential step to understanding proto-biological evolution. In our computer simulation studies, we showed that the structure of water at interfaces with nonpolar media is significantly different from that in the bulk. In particular, the average surface dipole density points from the vapor to the liquid. As a result, negative ions can approach the interface more easily than positive ions. Amphiphilic molecules composed of hydrocarbon conjugated rings and polar substituents (e.g., phenol) assume at the interface rigid orientations in which polar groups are buried in water while hydrocarbon parts are located in the nonpolar environment. These orientational differences are of special interest in connection with the ability of some of these molecules to efficiently absorb photons. Flexible molecules with polar substituents often adopt at interfaces conformations different from those in the bulk aquaeous solution and in the gas phase. As a result, in many instances both specificity and kinetics of chemical reactions in which these molecules can participate is modified by the presence of surfaces. Of special interest is the mechanism by which polar molecules are transferred across interface between water and a nonpolar medium. Our recent study showed that simple ionophores bind ions by the same mechanisms as ion channels and carriers from modern cells.

Pohorille, A.↗

Functional characteristics of the calcium modulated proteins seen from an evolutionary perspective

We have constructed dendrograms relating 173 EF-hand proteins of known amino acid sequence. We aligned all of these proteins by their EF-hand domains, omitting interdomain regions. Initial dendrograms were computed by minimum mutation distance methods. Using these as starting points, we determined the best dendrogram by the method of maximum parsimony, scored by minimum mutation distance. We identified 14 distinct subfamilies as well as 6 unique proteins that are perhaps the sole representatives of other subfamilies. This information is given in tabular form. Within subfamilies one can easily align interdomain regions. The resulting dendrograms are very similar to those computed using domains only. Dendrograms constructed using pairs of domains show general congruence. However, there are enough exceptions to caution against an overly simple scheme in which one pair of gene duplications leads from one domain precurser to a four domain prototype from which all other forms evolved. The ability to bind calcium was lost and acquired several times during evolution. The distribution of introns does not conform to the dendrogram based on amino acid sequences. The rates of evolution appear to be much slower within subfamilies, especially within calmodulin, than those prior to the definition of subfamily.

Kretsinger, R. H.↗

Advanced flight software reconfiguraton

Information is given in viewgraph form on advanced flight software reconfiguration. Reconfiguration is defined as identifying mission and configuration specific requirements, controlling mission and configuration specific data, binding this information to the flight software code to perform specific missions, and the release and distribution of the flight software. The objectives are to develop, demonstrate, and validate advanced software reconfiguration tools and techniques; to demonstrate reconfiguration approaches on Space Station Freedom (SSF) onboard systems displays; and to interactively test onboard systems displays, flight software, and flight data.

Porcher, Bryan↗

Fiber optic-based biosensor

The NRL fiber optic biosensor is a device which measures the formation of a fluorescent complex at the surface of an optical fiber. Antibodies and DNA binding proteins provide the mechanism for recognizing an analyze and immobilizing a fluorescent complex on the fiber surface. The fiber optic biosensor is fast, sensitive, and permits analysis of hazardous materials remote from the instrumentation. The fiber optic biosensor is described in terms of the device configuration, chemistry for protein immobilization, and assay development. A lab version is being used for assay development and performance characterization while a portable device is under development. Antibodies coated on the fiber are stable for up to two years of storage prior to use. The fiber optic biosensor was used to measure concentration of toxins in the parts per billion (ng/ml) range in under a minute. Immunoassays for small molecules and whole bacteria are under development. Assays using DNA probes as the detection element can also be used with the fiber optic sensor, which is currently being developed to detect biological warfare agents, explosives, pathogens, and toxic materials which pollute the environment.

Ligler, Frances S.↗