Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “atomically thin”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Cr-Be Pushered Single Shell (PSS) Capsule Development

Pushered single shell (PSS) has emerged as an alternative platform of implosion to ease the stability issue at the ablation front. The design consists of a thin inner Be layer, a 50% Cr:Be plateau region, an S-curve gradient, a low Cr (1.5%) tamper layer, and followed by a pure Be outer layer. General Atomics has developed a way to fabricate the higher-Z Cr to lower-Z Be gradients on glow discharge polymer mandrels with a designed S-shape profile for optimal implosion stability using magnetron sputtering. Microstructure analysis of the gradient coating indicated that at lower Cr concentration a short order or amorphous structure was formed. Here, these fabricated PSS capsules were subsequently built into capsule fill tube assemblies, verified to be leak tight at both ambient and cryogenic conditions, and delivered to Lawrence Livermore National Laboratory for the shots. The capsule thermal stability was demonstrated by invariable Cr profiles before and after pyrolysis. However, cracking at inner Cr layers was observed, which has been attributed to thermal stress.

Capsule↗
DOE OSTI2026

Evolution of size-selected Pt cluster catalysts on prototypical oxide supports

The current quest for new pathways into sustainable, efficient and durable energy conversion technologies makes the used for a fundamental understanding of the atomic-scale phenomena underlying catalytic processes ever more pressing. In this context, characterizing catalyst particles in situ provides valuable information about the evolution of their composition, structure, oxidation state and charge state during an ongoing process. To disentangle the influence of individual parameters – temperature, pressure, gas composition, cluster size, as well as support acidity, redox state and defect density – it is crucial to control them precisely and separately in experiments. At the example of size-selected Pt n clusters – i.e. sub-nm particles defined to the exact number of atoms – on flat oxide supports, we follow their rich evolution phenomena via (synchrotron-based) X-ray photoelectron spectroscopy (XPS) and scanning tunnelling microscopy (STM) during temperature ramps and in various gas environments. Here, we present our experience with these highly defined, yet complicated-to-create samples in ultra-high vacuum (UHV) and at mbar pressures. We discuss their stability during transport to synchrotrons and under reaction conditions on three prototypical oxide supports and show the various phenomena that can be disentangled. Ptn clusters on the non-reducible silicon dioxide, SiO 2 , remain size-selected and show remarkable stability. Doping strongly influences the size-dependent binding energy shifts and changes the Pt response to oxidative and reaction conditions, which we attribute to different cluster geometries: p-type doping leads to wetting, enhanced sinter resistance and a diminished response to oxidative environments, compared to clusters on n-type doped samples. We compare the system with our previous findings of a similar change in dimensionality for Pt 20 clusters on the reducible ceria, CeO 2 (111), support, induced by modulation of its O vacancy density. The Pt n /CeO 2 system is particularly interesting for strategies to stabilize and redisperse Pt clusters dynamically. Finally, we study the evolution of Pt n clusters on another reducible oxide support, magnetite, Fe 3 O 4 (001), in 0.1 mbar alternating redox conditions at RT and elevated temperature. In analogy to findings previously reported for Pt/TiO 2 (110), the clusters either become encapsulated by a thin oxide film via strong metal–support interaction (SMSI) or deeply buried in the magnetite. Overall, our approach of following the evolution of size-selected clusters on oxide supports leads to fundamental atomic-scale insights on nano-scale catalyst materials, on our path to sustainable, dynamic and self-repairing catalysts.

Falling, Lorenz J. [Technical Univ. of Munich (Ger↗
DOE OSTI2020

Quantum many-body scars in a Landau level on a thin torus

We review a kinetically constrained pair-hopping model that arises within a Landau level in the quantum Hall effect. At filling ν = 1/3, the model exactly maps onto the so-called “PXP model,” a constrained model for the Rydberg atom chain that is numerically known to exhibit ETH-violating states in the middle of the spectrum or quantum many-body scars. Indeed, particular charge density wave configurations exhibit the same revivals seen in the PXP model. We generalize the mapping to fillings factors ν = p/(2p+1), and show that the model is equivalent to nonintegrable spin chains within particular constrained Krylov Hilbert spaces. These lead to new examples of quantum many-body scars which manifest as revivals and slow thermalization of particular charge density wave states. Finally, we investigate the stability of the quantum scars under certain Hamiltonian perturbations motivated by the fractional quantum Hall physics.

1-dimensional spin chains↗
DOE OSTI2022

Robust Atomic-Resolution Imaging of Lithium in Battery Materials by Center-of-Mass Scanning Transmission Electron Microscopy

The performance of energy storage materials is often governed by their structure at the atomic scale. Conventional electron microscopy can provide detailed information about materials at these length scales, but direct imaging of light elements such as lithium presents a challenge. While several recent techniques allow lithium columns to be distinguished, these typically either involve complex contrast mechanisms that make image interpretation difficult or require significant expertise to perform. In this work, we demonstrate how center-of-mass scanning transmission electron microscopy (CoM-STEM) provides an enhanced ability for simultaneous imaging of lithium and heavier element columns in lithium ion conductors. Through a combination of experiments and multislice electron scattering calculations, we show that CoM-STEM is straightforward to perform and produces directly interpretable contrast for thin samples, while being more robust to variations in experimental parameters than previously demonstrated techniques. As a result, CoM-STEM is positioned to become a reliable and facile method for directly probing all elements within energy storage materials at the atomic scale.

25 ENERGY STORAGE↗
DOE OSTI2021

Novel synthesis approach for “stubborn” metals and metal oxides

Significance Atomically precise complex oxides containing “stubborn” elements, such as ruthenium, iridium, and platinum, hold tremendous promise as designer quantum materials for exploring novel electronic, magnetic, superconducting, and topological phases owing to their strong spin–orbit interaction. This study shows a method to synthesize such materials by eliminating the major synthesis bottleneck of low vapor pressure and difficulty in oxidation. This study serves as a “proof-of-concept” allowing us to 1) grow Pt, RuO 2 , and SrRuO 3 thin films by supplying Pt and Ru precursors at 65 to 100 °C in a low-temperature effusion cell, as opposed to the several thousand degrees Celsius needed using electron beam evaporators; 2) reveal bulk-like room-temperature resistivity; and 3) ultimately provide pathways to creating atomically precise quantum structures.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Electrochromic Properties of Perovskite NdNiO 3 Thin Films for Smart Windows

Semiconductors with electrically tunable band gaps are of great interest in controlling transparency to electromagnetic radiation. Thin films of perovskite nickelate NdNiO 3 (NNO), a class of correlated oxides, were deposited on single-crystal (LaAlO 3 (LAO)) and polycrystalline (fluorine-doped tin oxide-coated glass (FTO)) substrates by magnetron sputtering, chemical solution deposition (CSD), and atomic layer deposition (ALD). Their electrochromic behaviors were investigated using a three-electrode setup in basic (KOH solution, pH = 12) electrolyte. During bleaching/coloration process, the proton intercalation/deintercalation and simultaneous electron compensation in the NNO lattice under electrical bias led to crossover of the material between the pristine-conducting phase (Ni 3+ ) and the strongly correlated insulating phase (Ni 2+ ), which serves as the working principle for electrochromic (tunable opacity in the visible range) behavior. Cyclic voltammetry (CV) scans demonstrate that NNO films are electrochemically stable in basic solutions for all three film deposition methods explored here. CV scans at varying rates enabled the extraction of diffusion coefficient of protons in thin film NNO, which is similar to 10 –7 cm 2 s –1 among all films studied. Large light transmittance modulation by bleaching and coloration was observed on films grown on both LAO and FTO substrates, suggesting its potential as an electrochromic material candidate for smart windows and optical shutter applications. Here, porous NNO films obtained by chemical solution deposition tend to demonstrate stronger electrochromic activity than dense films grown by sputtering or ALD.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Reduced thermal resistance of Al-rich AlGaN HEMTs via top-side diamond integration

We report back-end-of-line growth of nanocrystalline diamond (NCD) on ultrawide bandgap (UWBG) high Al content aluminum gallium nitride (AlGaN) channel high electron mobility transistors for thermal management. A thin (∼15 nm) silicon nitride (SiN x ) interlayer was deposited to protect the device surface before performing a low temperature (500 °C) NCD growth process in an attempt to protect the gates on these fully fabricated devices. Notably, atomic force microscopy showed that the maximum lateral grain size exceeded 300 nm even though the film thickness was ∼250 nm. Comparing electrical (DC) performance before and after NCD growth, the gate leakage increased by ∼10 2 after NCD growth. Despite the lower NCD growth temperature, intermixing of the Ni and Au was observed in the Schottky gate metal stack; however, we believe there is another mechanism, possibly hydrogen-related, that is responsible for the measured increase in gate leakage. Regarding thermal management, the device-level thermal resistance (quantified using the average gate temperature rise measured by thermoreflectance imaging) was reduced by 29% through the incorporation of the top-side diamond film. Using time-domain thermoreflectance, the thermal conductivity of the ≈250 nm thick NCD film was measured to be 45 ± 25 W m −1 K −1 . This is expected to be at least 5× greater than the thermal conductivity of the thin disordered AlGaN alloy. There could also be a coupled electrothermal component contributing to the reduced temperature rise from electric field spreading and consequent heat spreading. This study demonstrates a promising first step toward device-level thermal management of high power UWBG Al-rich AlGaN devices.

Lundh, James Spencer [U.S. Naval Research Laborato↗
DOE OSTI2024

Commissioning of a modulated pulse-power magnetron sputtering system for depositing niobium thin films

A modulated pulse-power magnetron sputtering system (MPPMS) was commissioned and used to deposit niobium on copper. MPPMS utilizes a modulated pulse train with high peak-to-average energy ratios, thereby increasing the energy density leading to the production of the energetic ions. The MPPMS modulator was designed and constructed based on large voltage/current IGBT modules, which can be externally modulated, produce bi-polar waveforms, and are readily available. A high voltage power supply provides moderate current to the IGBT module to create the precise pulse structure. The MPPMS system was used to deposit ~1 mm thick, niobium film on a copper substrate held at ~77 K to minimize Nb atom surface diffusion and maximize intrinsic film energy. Finally, the Nb film had an average grain size of ~8 nm.

42 ENGINEERING↗
DOE OSTI2020

Erratum: “History of atomic layer deposition and its relationship with the American Vacuum Society” [J. Vac. Sci. Technol. A 31, 050818 (2013)]

The authors of this review article published in 20131 would like to correct some text and references relating to the first observations and publications on molecular layering. In Sec. II, “Early Years of Atomic Layer Processes” in the original article,1 the first two sentences of the fourth paragraph should instead say “The ALD principle, where surface reactions follow a binary sequence of self-limiting half-reactions, was reported under the name ‘molecular layering’ in the 1960s by S. I. Kol’tsov from Leningrad Technological Institute.2–6 These experiments were conducted under the scientific supervision of V. B. Aleskovskii. The ‘framework hypothesis,’ an antecedent to molecular layering, was proposed by V. B. Aleskovskii in 1952.6” In addition, again in this same section and paragraph, the last two sentences should instead say “In the 1969 article,3 the authors report that the initial reaction between TiCl4 and Si–OH tends to involve 3 Si–OH, forming one Ti–Cl, whereas after the first water step, the second TiCl4 exposure reacts with 2 Ti–OH, forming Ti–Cl2 groups. In the 1969 paper,3 a planar thin film was not produced or evaluated, although nanolayers were prepared by molecular layering at that time.6” These corrections do not affect other sections or the conclusions drawn in the article.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Observation of [VCu1–Ini2+VCu1–] Defect Triplets in Cu-Deficient CuInS2

Copper indium disulfide (CuInS2) is a semiconductor with a direct energy band gap of 1.53 eV, an optimal value for highly efficient thin-film solar cells. But it has reached only ~ 11 % power conversion efficiency, far less than the theoretically achievable value of ~ 30 %. The cause of this low performance is not understood. A single crystal grown from 1 mol% Cu-deficient melt was studied, using atomic resolution high-angle annular dark-field (HAADF) scanning transmission electron microscopy (STEM) and electron dispersive spectroscopy (EDS). While the bulk crystal is exactly stoichiometric CuInS2, it contains nanometer-thick, structurally coherent, Cu-deficient interphases that form along rotational twin boundaries in the {112} plane. Transition zones from bulk crystal to interphase are observed, where In is seen to move from its normal site InIn in the chalcopyrite structure to a tetrahedral interstitial site Ini, while Cu remains in its normal CuCu position. Two InIn rows of the bulk crystal merge into one row of Ini, causing excess Ini in the interphase. The concentrations of CuCu and Ini reflect a ratio of Cu vacancies, VCu, to excess Ini of ~ 2. Their relative lattice positions, and the high electrical resistivity of the crystal, suggests that VCu and excess Ini ‘precipitate’ as self-compensating, electrically neutral, [VCu1- Ini2+ VCu1-] defect triplets. This is the first atomic-level observation of the ordered defect that has been invoked as the basic structural modifier in chalcopyrite compound homologs. The interphases introduce an optical gap of 1.47 eV. Electron trapping in band tail states, evident from a photoconductivity exponent of 0.54, is the likely cause of an unusually low electron mobility of 0.1 cm2V-1s-1. The overall result is that making CuInS2 slightly copper-poor inserts nanometer-thick layers of the interphase into the bulk crystal. This study shows that apparently conflicting results of the effect of Cu deficiency on CuInS2 thin-film solar cells may be resolved by analyzing structure and composition at nanometer spatial resolution.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Magnetic structure of Fe 16 N 2 determined by polarized neutron diffraction on thin-film samples

Strain-free Fe 16 N 2 thin films were obtained on MgO (001) single-crystal substrates with Cr seed layers. Additionally, x-ray diffraction and transmission electron microscopy confirmed that the film is textured in all three spatial directions with crystallographic orientation determined by epitaxial constraints from the substrate. Average grain size was estimated to be in the range of tens of nanometers. Ten pieces of 40-nm-thick Fe 16 N 2 thin-film samples were stacked together for half-polarized neutron diffraction study at room temperature. A total of six reflections were usable, from which the magnetic structure of Fe 16 N 2 was determined and compared to existing models. Contrary to most electronic structure calculations, the present results suggest that the magnetic moment of Fe atoms at the 8h site is large and larger than that of the 4d site. Our results support the giant magnetization of Fe 16 N 2 .

36 MATERIALS SCIENCE↗
DOE OSTI2021

Characterizing mechanical and microstructural properties of novel montmorillonite-rich polyethylene composites

Montmorillonite (MMT) clays are important industrial materials used as catalysts, chemical sorbents and fillers in polymer–clay nanocomposites. The layered structure of these clays has motivated research into further applications of these low-cost materials, including use as ion exchange media and solid-state ionic conductors. In these applications, the mechanical properties of MMT are key when considering long-term, reliable performance. Previous studies have focused on the mechanical properties of nanocomposites with MMT as the minority component or pure MMT thin films. In this work, the microstructure and mechanical properties of pure MMT and majority MMT/polyethylene composites pressed into dense pellets are examined. Characterization methods such as X-ray diffraction, atomic force microscopy and scanning electron microscopy together with nanoindentation reveal important structure–property relationships in the clay-based materials. Here, utilizing these techniques, we have discovered that MMT processing impacts the layered microstructure, chemical stability and, critically, the elastic modulus and hardness of bulk MMT samples. Particularly, the density of the pellets and the ordering of the clay platelets within them strongly influence the elastic modulus and hardness of the pellets. By increasing pressing force or by incorporating secondary components, the density, and therefore mechanical properties, can be increased. If the layered structure of the clay is destroyed by exfoliation, the mechanical properties will be compromised. Understanding these relationships will help guide new studies to engineer mechanically stable MMT-based materials for industrial applications.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Polymer-Derived Amorphous Aluminosilicate Nanomembranes for H 2 Purification

Aluminosilicate zeolite membranes with robust microporous crystalline structures are attractive for the molecular separation of H 2 from light gases, but their large-scale fabrication is complicated and costly, hindering their practical applications. Herein, we present polymer-derived amorphous aluminosilicate nanomembranes that combine the exceptional processability of polymers with the superior gas separation properties of aluminosilicates. Specifically, thin-film composite membranes comprising 150 nm polydimethylsiloxane were first treated with oxygen plasma to generate 10 nm polyorganosilica (POSi) on the surface, which were then subjected to few-cycle atomic layer deposition (ALD) using trimethylaluminum as a metal precursor and water vapor as a coreactant. This scalable two-step process yields few-nanometer amorphous aluminosilicates with strong size-sieving ability. For example, three-cycle ALD treatment of POSi increases H 2 /CO 2 selectivity from 39 to 200 and H 2 /CH 4 selectivity from 190 to 500, while decreasing H 2 permeance from 990 to 210 GPU at 150 °C, superior to the state-of-the-art membranes. In conclusion, rapid and scalable manufacturing of amorphous aluminosilicate nanolayers can also be of interest for catalysis and adsorption applications.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Epitaxial stabilization of thin films of the frustrated Ge-based spinels

Frustrated magnets can host numerous exotic many-body quantum and topological phenomena. GeNi 2 O 4 is a three-dimensional S=1 frustrated magnet with an unusual two-stage transition to the two-dimensional antiferromagnetic ground state, while GeCu 2 O 4 is a high-pressure phase with a strongly tetragonally elongated spinel structure and magnetic lattice formed by S=1/2 CuO 2 linear chains with frustrated interchain exchange interactions and exotic magnetic behavior. Here, we report on the thin-film epitaxial stabilization of these two compounds. The developed growth mode, surface morphology, crystal structure, and copper valence state were characterized by in situ reflection high-energy electron diffraction, atomic force microscopy, x-ray reflectivity, x-ray diffraction, x-ray photoelectron spectroscopy, and resonant x-ray absorption spectroscopy. Our results pave an alternative route to the comprehensive investigation of the puzzling magnetic properties of these compounds and the exploration of emergent features driven by strain.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Plasmon and Photon Excitations in Two-Dimensional and Layered Materials

Light-matter interactions in layered and two-dimensional materials allows one to achieve extreme optical confinement approaching the atomic scale, enabling exploration of new materials phenomena. Layered narrow bandgap and zero bandgap materials, such as black phosphorus and graphene, support unusual and intriguing quantum-confined electronic states in thin layers and surface electronic states. The incomplete screening of applied electrostatic fields in ultrathin materials permits the exploration of light-matter interactions at high electric fields and over a wide range of carrier densities in a single sample, facilitating exploration of the optical and plasmonic properties of ultrathin and layered materials under electrochemical potential control. We have made advances in understanding the nature of optical interband and intraband plasmon excitations in layered materials such as graphene, black phosphorus, molybdenum diselenide, and molybdenum ditelluride.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2025

Intrinsic Defect-Induced Local Semiconducting-to-Metallic Regions Within Monolayer 1T-TiS2 Displayed by First-Principles Calculations and Scanning Tunneling Microscopy

Using density functional theory (DFT) and scanning tunneling microscopy (STM), the intrinsic point defects, formation energy, and electronic structure of 1T-TiS2 were investigated. Defect systems include single-atom vacancies, interstitial and adatom additions, and direct atomic substitution. Using a collective approach for analyzing realistic systems for point defect investigation, we provide a more straightforward comparison to the experimental measurements, reproducing more realistic environmental conditions related to thin film growth. STM images are compared to computationally simulated electron density images to identify specific geometries that result from favorable point defects. DFT suggests that titanium interstitials are the most energetically favorable intrinsic defect, and sulfur vacancies are more likely to form than titanium vacancies within this realistic analysis, which is in agreement with STM data. A pristine, stoichiometric monolayer system is calculated to have a direct band gap of 0.422 eV, which varies based on local point defects. Local semiconducting-to-metallic electronic transitions are predicted to occur based on the presence of Ti interstitials.

Keeney, P. J.↗
DOE OSTI2021

Stamping Nanoparticles onto the Electrode for Rapid Electrochemical Analysis in Microfluidics

Electrochemical analysis is an efficient way to study various materials. However, nanoparticles are challenging due to the difficulty in fabricating a uniform electrode containing nanoparticles. We developed novel approaches to incorporate nanoparticles as a working electrode (WE) in a three-electrode microfluidic electrochemical cell. Specifically, conductive epoxy was used as a medium for direct application of nanoparticles onto the electrode surface. Three approaches in this work were illustrated, including sequence stamping, mix stamping, and droplet stamping. Shadow masking was used to form the conductive structure in the WE surface on a thin silicon nitride (SiN) membrane. Two types of nanomaterials, namely cerium oxide (CeO2) and graphite, were chosen as representative nanoparticles. The as-fabricated electrodes with attached particles were characterized using atomic force microscopy (AFM) and time-of-flight secondary ion mass spectrometry (ToF-SIMS). Electrochemical analysis was performed to verify the feasibility of these nanoparticles as electrodes. Nanomaterials can be quickly assessed for their electrochemical properties using these new electrode fabrication methods in a microfluidic cell, offering a passport for rapid nanomaterial electrochemical analysis in the future.

77 NANOSCIENCE AND NANOTECHNOLOGY↗