Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “applied physics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Integrating environmental understanding into freshwater floatovoltaic deployment using an effects hierarchy and decision trees

Abstract In an era of looming land scarcity and environmental degradation, the development of low carbon energy systems without adverse impacts on land and land-based resources is a global challenge. ‘Floatovoltaic’ energy systems—comprising floating photovoltaic (PV) panels over water—are an appealing source of low carbon energy as they spare land for other uses and attain greater electricity outputs compared to land-based systems. However, to date little is understood of the impacts of floatovoltaics on the hosting water body. Anticipating changes to water body processes, properties and services owing to floatovoltaic deployment represents a critical knowledge gap that may result in poor societal choices and water body governance. Here, we developed a theoretically-derived hierarchical effects framework for the assessment of floatovoltaic impacts on freshwater water bodies, emphasising ecological interactions. We describe how the presence of floatovoltaic systems may dramatically alter the air-water interface, with subsequent implications for surface meteorology, air-water fluxes and physical, chemical and biological properties of the recipient water body. We apply knowledge from this framework to delineate three response typologies—‘ magnitude’ , those for which the direction and magnitude of effect can be predicted; ‘ direction’ , those for which only the direction of effect can be predicted; and ‘ uncertain’ , those for which the response cannot be predicted—characterised by the relative importance of levels in the effects hierarchy. Illustrative decision trees are developed for an example water body response within each typology, specifically, evaporative water loss, cyanobacterial biomass, and phosphorus release from bed sediments, and implications for ecosystem services, including climate regulation, are discussed. Finally, the potential to use the new understanding of likely ecosystem perturbations to direct floatovoltaic design innovations and identify future research priorities is outlined, showcasing how inter-sectoral collaboration and environmental science can inform and optimise this low carbon, land-sparing renewable energy for ecosystem gains.

Environmental Sciences & Ecology↗
DOE OSTI2023

Soft matter roadmap

Soft materials are usually defined as materials made of mesoscopic entities, often self-organised, sensitive to thermal fluctuations and to weak perturbations. Archetypal examples are colloids, polymers, amphiphiles, liquid crystals, foams. The importance of soft materials in everyday commodity products, as well as in technological applications, is enormous, and controlling or improving their properties is the focus of many efforts. From a fundamental perspective, the possibility of manipulating soft material properties, by tuning interactions between constituents and by applying external perturbations, gives rise to an almost unlimited variety in physical properties. Together with the relative ease to observe and characterise them, this renders soft matter systems powerful model systems to investigate statistical physics phenomena, many of them relevant as well to hard condensed matter systems. Understanding the emerging properties from mesoscale constituents still poses enormous challenges, which have stimulated a wealth of new experimental approaches, including the synthesis of new systems with, e.g. tailored self-assembling properties, or novel experimental techniques in imaging, scattering or rheology. Theoretical and numerical methods, and coarse-grained models, have become central to predict physical properties of soft materials, while computational approaches that also use machine learning tools are playing a progressively major role in many investigations. This Roadmap intends to give a broad overview of recent and possible future activities in the field of soft materials, with experts covering various developments and challenges in material synthesis and characterisation, instrumental, simulation and theoretical methods as well as general concepts.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Electroweak scattering at the muon shot

It has long been recognized that the scattering of electroweak particles at very high energies is dominated by vector boson fusion, which probes the origin of electroweak symmetry breaking and offers a unique window into the ultraviolet regime of the Standard Model (SM). Previous studies assume SM-like couplings and rely on the effective W approximation (or electroweak parton distribution), whose validity is well established within the SM but not yet studied in the presence of anomalous Higgs couplings. In this work, we critically examine the electroweak production of two Higgs bosons in the presence of anomalous V V h and V V h h couplings. We compute the corresponding helicity amplitudes and compare the cross section results in the effective W approximation with the full fixed-order calculation. In particular, we identify two distinct classes of anomalous Higgs couplings, whose effects are not captured by vector boson fusion and effective W approximation. Such very-high-energy electroweak scatterings can be probed at the muon shot, a multi-TeV muon collider upon which we base our study, although similar considerations apply to other high-energy colliders. Published by the American Physical Society 2024

Han, Tao↗
DOE OSTI2025

Direct statistical simulation of the Lorenz96 system in model reduction approaches

Direct statistical simulation (DSS) of nonlinear dynamical systems bypasses the traditional route of accumulating statistics by lengthy direct numerical simulations by solving the equations that govern the statistics themselves. DSS suffers, however, from the curse of dimensionality as the statistics (such as correlations) generally have higher dimensions than the underlying dynamical variables. Here we investigate two approaches to reduce the dimensionality of DSS, illustrating each method with numerical experiments with the Lorenz96 dynamical system. The forms of DSS chosen here involve approximate closures at second and third order in the equal-time cumulants. We demonstrate significant reduction in computational effort that can be achieved without sacrificing the accuracy of DSS. The methods developed here can be applied to turbulent fluid and magnetohydrodynamical systems. Published by the American Physical Society 2025

Li, Kuan↗
DOE OSTI2026

Review of Ultrasonic Methods for Monitoring, Damage Detection, and Processing of Lithium-Ion Batteries Throughout Their Life Cycle

Lithium-ion batteries (LIBs) are the leading technology used in consumer electronics, electric vehicles, and grid-level electrochemical energy storage applications. The ever-increasing use of LIBs has highlighted a gap in understanding of their behavior throughout their life cycle. Current monitoring systems rely on electrical and sometimes temperature measurements to assess the internal state which limits information about complex electrochemical processes. In response, ultrasonic testing (UT) has shown promise for non-invasive assessment due to its ease of use and sensitivity to mechanical changes which are correlated with electrochemical changes within the battery. We summarize the research in UT methods applied to LIBs throughout their life cycle. We also discuss physics-based and data-driven modeling approaches used to interpret ultrasonic signals in the context of LIBs, with an emphasis on the existing challenge of establishing rigorous links between electrochemical behavior and elastic and poroelastic wave physics to gain insight regarding physical changes in the LIB that can be directly measured using UT. Finally, we discuss the challenges of implementing UT across the LIB life cycle and identify opportunities for further research. This review aims to provide helpful guidance to researchers and practitioners of UT in the growing field of UT for electrochemical battery systems.

25 ENERGY STORAGE↗
DOE OSTI2023

Neural networks for large eddy simulations of wall-bounded turbulence: numerical experiments and challenges

Here, we examine the application of neural network-based methods to improve the accuracy of large eddy simulations of incompressible turbulent flows. The networks are trained to learn a mapping between flow features and the subgrid scales, and applied locally and instantaneously—in the same way as traditional physics-based subgrid closures. Models that use only the local resolved strain rate are poorly correlated with the actual subgrid forces obtained from filtering direct numerical simulation data. We see that highly accurate models in a priori testing are inaccurate in forward calculations, owing to the preponderance of numerical errors in implicitly filtered large eddy simulations. A network that accounts for the discretization errors is trained and found to be unstable in a posteriori testing. We identify a number of challenges that the approach faces, including a distribution shift that affects networks that fail to account for numerical errors.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2023

Measurement of ambient radon daughter decay rates and energy spectra in liquid argon using the MicroBooNE detector

We report measurements of radon daughters in liquid argon within the MicroBooNE time projection chamber (LArTPC). The presence of radon in MicroBooNE’s 85 metric tons of active liquid argon bulk is probed with newly developed charge-based low-energy reconstruction tools and analysis techniques to detect correlated 214 Bi- 214 Po radioactive decays. Special datasets taken during periods of active radon doping enable new demonstrations of the calorimetric capabilities of singlephase neutrino LArTPCs for β and α particles with electron-equivalent energies ranging from 0.1 to 3.0 MeV. By applying 214 Bi- 214 Po detection algorithms to beam-external physics data recorded over a 46-day period, no statistically significant presence of radon is detected, corresponding to a limit of < 0.38 mBq/kg at the 95% confidence level. The obtained radon radiopurity limit – the first ever reported for a noble element detector incorporating liquid-phase purification – is well below the target value of the future DUNE neutrino detector.

61 RADIATION PROTECTION AND DOSIMETRY↗
DOE OSTI2024

Distributed Magnetic Field and Temperature Monitoring for Superconducting Radio Frequency Cavities

The overall objective of the proposed Phase I program was to design, construct and demonstrate a fiber optic sensing system capable of providing temperature and magnetic field measurements with an enhanced spatial resolution that can be implemented over a large surface area (cryomodules) to survey superconducting radio frequency cavities and magnets. A magnetic field sensor capable of detecting fluxes on the order of 1 μT is required to detect the distribution of trapped flux on the cavity surface. A unique distributed magnetic field sensor was successfully designed and constructed to demonstrate the detection of magnetic fluxes less than 500 nT. The sensor leveraged the ultra-high sensitivity of Sentek’s picoDAS to measure the magnetostriction induced vibrations in a commercially available Metglas 2605 SC ribbon that was in physical contact with sensing fiber. Static magnetic fields were detected by applying an alternating current a copper wire proximate to the Metglas 2605SC ribbon to create an AC bias magnetic field. In an alternative approach, an AC bias magnetic field was applied to a special magnetic field sensing fiber with Metglas 2605SC cladding successfully detect a magnetic field flux of a 3 μT. Exhaustive testing was performed to characterize the dependency of sensor response on the direction of the applied magnetic field. Although the special sensing fiber based magnetic field sensor did not exhibit an observable dependence on the direction of the magnetic field, the Metglas 2605SC ribbon sensor exhibited a clear directional dependence. A wide variety of polymer materials were evaluated to enhance the temperature response of an FBG based sensor at cryogenic temperatures. The processing and performance challenges provided the motivation to develop a new simple cryogenic temperature sensor that uses a commercially available fiber optic splice protector. The EVA hot melt tube that becomes adhered to the optical fiber and the polyolefin outer tube that shrinks upon heating in the fusion splicer heater provide the high thermal expansion coefficient necessary to impart a significant strain on the FBG when exposed to cryogenic temperatures. The temperature sensitivity (Δ𝜆𝐵𝑟𝑎𝑔𝑔~ 62 𝑝𝑝𝑚/℃) of the FBG-based sensor was on par with the best reported to date. The simple design, use of readily available cost-effective materials, and well-established processing techniques lends this approach to the creation of hundreds to thousands of temperature sensors on one single optical fiber length. The inherently small form factor also allows for co-location with the distributed magnetic field sensor. In preparation for field testing of the prototype sensing system at the Jefferson Labs in potential Phase II program, several different cable designs were evaluated to package the sensors. The preliminary successful demonstration of fully functional sensing cables provides the foundation for subsequent development efforts to advance the Technology Readiness Level of the technology. The technical feasibility of the proposed approach was successfully demonstrated in this Phase I effort.

43 PARTICLE ACCELERATORS↗
DOE OSTI2023

Machine-learning-based investigation of the variables affecting summertime lightning occurrence over the Southern Great Plains

Lightning is affected by many factors, many of which are not routinely measured, well understood, or accounted for in physical models. Several commonly used machine learning (ML) models have been applied to analyze the relationship between Atmospheric Radiation Measurement (ARM) data and lightning data from the Earth Networks Total Lightning Network (ENTLN) in order to identify important variables affecting lightning occurrence in the vicinity of the Southern Great Plains (SGP) ARM site during the summer months (June, July, August and September) of 2012 to 2020. Testing various ML models, we found that the random forest model is the best predictor among common classifiers. When convective clouds were detected, it predicts lightning occurrence with an accuracy of 76.9 % and an area under the curve (AUC) of 0.850. Using this model, we further ranked the variables in terms of their effectiveness in nowcasting lightning and identified geometric cloud thickness, rain rate and convective available potential energy (CAPE) as the most effective predictors. The contrast in meteorological variables between no-lightning and frequent-lightning periods was examined for hours with CAPE values conducive to thunderstorm formation. Besides the variables considered for the ML models, surface variables and mid-altitude variables (e.g., equivalent potential temperature and minimum equivalent potential temperature, respectively) have statistically significant contrasts between no-lightning and frequent-lightning hours. For example, the minimum equivalent potential temperature from 700 to 500 hPa is significantly lower during frequent-lightning hours compared with no-lightning hours. Finally, a notable positive relationship between the intracloud (IC) flash fraction and the square root of CAPE ($\sqrt{CAPE}$) was found, suggesting that stronger updrafts increase the height of the electrification zone, resulting in fewer flashes reaching the surface and consequently a greater IC flash fraction.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Extension of the PINN diffusion model to k-eigenvalue problems

This paper extends our recent work on the Physics-Informed Neural Networks (PINN) approach for the fixed source diffusion models and applies it to the diffusion theory based k-eigenvalue problems. To make the PINN equitable for the eigenvalue problems, we introduce a novel integral regularization term to the loss function in the framework, and allow the direct inference of the principal eigenvalue and the associated eigenfunction. The regularization term enforces a pre-defined value on the integration of the model predictions, and this value can be directly related to a physical property of the system. We also introduce an additional learnable parameter to approximate the principal eigenvalue. As a proof of principle, we solve the one-group two-dimensional k-eigenvalue neutron diffusion equation in this work. We then provide two numerical examples to demonstrate the applicability of the PINN approach. In each example, we solve the k-eigenvalue diffusion equation in a multi-region configuration constrained with a set of Robin boundary conditions for generality. We use a FEM solution based on the power-iteration method to verify the results of the PINN solution. The results showed relative percentage error in the predicted eigenvalue of about 0.77% and about 1.2% for example 1 and example 2, respectively. The mean absolute error in the predicted flux for example 1 is ∼ 0.002 and for example 2 is ∼ 0.0024. These results indicate some preliminary successes of the PINN application to k-eigenvalue problems. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2023

Safe Exploration Reinforcement Learning for Load Restoration using Invalid Action Masking

This paper addresses the load restoration problem after a power outage event. Our primary proposed methodology uses a multi-agent reinforcement learning method to make the optimal sequential decisions on picking up critical loads. Typically, a negative reward is provided to discourage the agents from selecting decisions that violate physical constraints during the restoration process. However, the main disadvantage of this approach is its difficulty in applying it to large-scale systems due to the curse of dimensionality. This paper introduces the invalid action masking technique to overcome this limitation. The features of this technique include zero physical constraint violations, reduced training time, and stabilization of the explo- ration process. Simulation results are performed in IEEE 13-node and IEEE 123-node systems showing the better performance of the proposed algorithm in comparison to the conventional approaches both in terms of restored power and learning curve.

reinforcement learning, blackstart, artificial int↗
DOE OSTI2024

NuclPred v1

This tool takes a genome assembly as input and predicts per-site nucleosome occupancy as output. Trained on physical maps of nucleosome binding preferences across the fungal kingdom, NuclPred can be applied broadly across fungi (and other eukaryotes). This breadth, combined with its accuracy, means it could have both basic and applied biological implications, for example in understanding eukaryotic gene regulation and genetic engineering. Almost universally across eukaryotes, nucleosomes - each wrapping ~150 base pairs of DNA - serve to package DNA inside the nucleus, with major consequences on DNA access, gene activity and DNA integration. NuclPred was generated using a supervised deep learning approach combining convolutional and recurrent neural networks to take DNA features (nucleotides, GC content and structural information) as input, then use that information to predict the physical attractiveness DNA sequences might have for forming nucleosomes. With this information at hand, researchers can design more efficient CRISPR constructs, explore the interplay between DNA signatures and other regulators impact nucleosome locations, predict expression patterns, etc. This tool will be published as part of a manuscript currently under revision at iScience (draft attached).

Mondo, Stephen↗
DOE OSTI2023

Fundamental aspects of Spacetime and Quantum Fields

The proposal contained two goals: firstly, placing fundamental bound on thermalization in Quantum Field Theories (QFTs) and, secondly, developing our understanding of emergent spacetime from matrices through concrete models. Since the previous reporting period, in collaboration with Sean Hartnoll we have continued our study of entanglement edge modes in matrix quantum mechanics (MQM). This has resulted in two papers. The first applies our construction for the Matrix Quantum Hall system first to fuzzy sphere states known to correspond to stringy M2-branes in MQM. Entanglement in these states using machine learning methods have also been studied by Sean Hartnoll and Xizhi Han in previous work done under this grant. Our construction builds on this work, and further demonstrates how area laws on fuzzy geometries emerge from strongly coupled systems. The second paper generalizes this construction to all noncommutative geometries with curvature much larger than the noncommutativity parameter. We demonstrate that despite UV/IR mixing effects, the structure of entanglement edge mode irreducible representations is determined by the boundary area of subsystems. On manifolds without global symmetries, we have demonstrated that nonlocal effects inherent to noncommutative geometries resum into a change of frame of the metric structure, similar to the change from string frame to Einstein frame for entanglement entropies calculated in string theory. These advancements lay the groundwork for future progress in the understanding of emergent geometry from large-N theories. Using these techniques, we are currently working on applying our methods to noncom mutative geometries whose construction is not so well understood, such as the fuzzy 5-sphere. Despite their opacity these objects are quite important, as string physics in the bulk of holographic systems bears many features of noncommutative geometry. We have also laid the groundwork of applying our methods to tensor networks, one of the most powerful models for understanding how geometry emerges from entanglement.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2024

A multilayer network analysis of Alzheimer's disease pathogenesis: Roles for p‐tau, synaptic peptides, and physical activity

INTRODUCTION: In the aging brain, cognitive abilities emerge from the coordination of complex pathways arising from a balance between protective lifestyle and environmental factors and accumulation of neuropathologies. METHODS: As part of the Rush Memory and Aging Project (n = 440), we measured accelerometer-based actigraphy, cognitive performance, and after brain autopsy, selected reaction monitoring mass spectrometry. Multilevel network analysis was used to examine the relationships among the molecular machinery of vesicular neurotransmission, Alzheimer's disease (AD) neuropathology, cognition, and late-life physical activity. RESULTS: Synaptic peptides involved in neuronal secretory function were the most influential contributors to the multilayer network, reflecting the complex interdependencies among AD pathology, synaptic processes, and late-life cognition. Older adults with lower physical activity evidenced stronger adverse relationships among phosphorylated tau peptides, markers of synaptic integrity, and tangle pathology. DISCUSSION: Network-based approaches simultaneously model interdependent biological processes and advance understanding of the role of physical activity in age-associated cognitive impairment. Highlights: Network-based approaches simultaneously model interdependent biological processes. Secretory synaptic peptides were influential contributors to the multilayer network. Older adults with lower physical activity had adverse relationships among pathology. There was interdependence among phosphorylated tau, synaptic integrity, and tangles. Network methods elucidate the role of physical activity in cognitive impairment.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2021

Find the Gap: Black Hole Population Analysis with an Astrophysically Motivated Mass Function

We introduce a novel black hole mass function that realistically models the physics of pair-instability supernovae with a minimal number of parameters. Applying this to all events in the LIGO-Virgo Gravitational-Wave Transient Catalog 2 (GWTC-2), we detect a peak at M BHMG = 46$^{+17}_{-6}$ M ⊙ . Repeating the analysis without the black holes from the event GW190521, we find this feature at M BHMG =54± 6 M ⊙ . These results establish the edge of the anticipated "black hole mass gap" at a value compatible with the expectation from standard stellar structure theory. The mass gap manifests itself as a discontinuity in the mass function and is populated by a distinct, less-abundant population of higher-mass black holes. We find that the primary black hole population scales with power-law index -1.95 ± 0.51 (-1.97 ± 0.44) with (without) GW190521, consistent with models of star formation. Using Bayesian techniques, we establish that our mass function fits a new catalog of black hole masses approximately as well as pre-existing phenomenological mass functions. We also remark on the implications of these results for constraining or discovering new phenomena in nuclear and particle physics.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

Insights into Methodologies and Operational Details of Resource Adequacy Assessment: A Case Study with Application to a Broader Flexibility Framework

Assessing and maintaining resource adequacy (RA) is a core pillar of power systems. However, recent changes in the physical makeup of these systems and the conditions under which these systems must operate have yielded a renewed interest in the methods, metrics, and assumptions that underpin RA assessments. In this paper, we systematically explore a wide range of RA modeling dimensions, including: the objective function and level of operational detail in the underlying model formulation; the quantity (look-ahead) and quality (accuracy) of data that is available for making operational decisions within those models; and the physical configuration of solar photovoltaics (PV) with battery storage hybrid resources. We apply a set of probabilistic RA tools and production cost modeling tools to a realistic test system based loosely on a future Electric Reliability Council of Texas power system dominated by solar PV resources. Under the assumptions of our system and models, we find that multi-stage probabilistic assessments may provide a more robust evaluation of RA by capturing a wider range of operational and system interactions, but this comes at a computational cost of 1-2 orders of magnitude longer run time depending on the specific configuration. In addition, the information on thermal generator availability impacts RA performance by an order of magnitude more than solar resource forecasts, which is driven by the comparatively larger magnitude of thermal outages than solar forecast errors within our test system. Lastly, the flexibility provided by hybrid and other resources can help reduce system load-shedding event frequencies and enable the system to be more robust to inaccurate forecast information, and alternative hybrid inverter sizes can impact RA levels by 1-2 orders of magnitude. Our results point to the importance of a broader flexibility framework to describe the interaction between (1) flexibility "supply" from both physical resource capabilities and operational constraints considered in the modeling, and (2) flexibility "demand" from forecast errors, thermal generator outages, and other sources of uncertainty, as well as their RA impacts. Results are likely sensitive to the system buildout explored; future work could consider additional system configurations and conditions.

ENERGY PLANNING, POLICY, AND ECONOMY,POWER TRANSMI↗
DOE OSTI2020

DCTRGAN: improving the precision of generative models with reweighting

Significant advances in deep learning have led to more widely used and precise neural network-based generative models such as Generative Adversarial Networks (Gans). We introduce a post-hoc correction to deep generative models to further improve their fidelity, based on the Deep neural networks using the Classification for Tuning and Reweighting (Dctr) protocol. The correction takes the form of a reweighting function that can be applied to generated examples when making predictions from the simulation. We illustrate this approach using Gans trained on standard multimodal probability densities as well as calorimeter simulations from high energy physics. We show that the weighted Gan examples significantly improve the accuracy of the generated samples without a large loss in statistical power. This approach could be applied to any generative model and is a promising refinement method for high energy physics applications and beyond.

47 OTHER INSTRUMENTATION↗
DOE OSTI2023

Floquet engineering multichannel Kondo physics

Floquet engineering has been used to engineer novel interactions in uncorrelated and magnetic insulating materials. Here, we apply this technique to simple heavy fermion models, showing that driving these systems with periodic light introduces emergent Kondo screening channels with distinct symmetries, where the allowed channels are controlled by the light polarization. Furthermore, these systems can be driven through multi-channel degeneracy points, dynamically realizing multi-channel Kondo impurities and lattices that can be used to explore quantum critical phenomena and potentially enhance superconductivity.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗