Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “amorphization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44
All sourcesNASA NTRSDOE OSTI
NASA NTRS1984

Specular reflectance of optical-black coatings in the far infrared

Far-infrared specular reflectance spectra of seven optically black coatings near normal incidence are presented. Seven photometric spectra were obtained using eleven bandpass transmission filters in the wavelength range between 12 and 500 microns, and three interferometric spectra were obtained for corroboration. Data on the construction, thickness, and rms surface roughness of the coatings are also presented. The chemical composition of three coatings can be distinguished from that of the others by a strong absorption feature between 20 and 40 microns, which can be largely attributed to amorphous silicate material. At 100 microns, the most and least reflective coatings differ by nearly 3 orders of magnitude. Inverse relationships observed between the spectra and the roughness and thickness of the coatings led to development of a reflecting-layer model for the measured reflectance. The model successfully describes the spectra at wavelengths outside the silicate absorption, and optical constants are deduced from a nonlinear least squares fit to the data. Parametric errors are estimated by chi-square analysis, and sensitivity tests are performed to determine which parameters control reflectance in different spectral regions.

Smith, S. M.↗
NASA NTRS1984

Substrate orientation dependence of enhanced epitaxial regrowth of silicon

This work extends the study of dopant-enhanced epitaxial regrowth rate of amorphized Si from the 100 to the 110 and 111 line orientations of Si. Boron and phosphorus dopants are considered. The annealing temperatures are 500 and 550 C. Phosphorus enhances the growth rates in all three orientations by a constant factor of 8.1 + or - 0.9. Boron produces a higher enhancement factor of 12.2 + or - 1.2, except in the case of 100. Implications of the results on various growth models are considered. The crystalline quality of regrown 111 layers is improved in the doped samples.

Ho, K. T.↗
NASA NTRS1984

The dust content of the planetary nebula IC 3568

Far-infrared photometry of IC 3568 shows a substantial excess that is not suggested by 10 micron data. A recently constructed model for the nebula permits the temperature profile for dust to be computed. The calculated infrared spectrum reproduces the observations well and requires that the grains have absorption properties like those of amorphous carbon. The dust coexists in the ionized gas but is heated directly by stellar radiation; most of the Ly-alpha radiation escapes from the nebula.

Cohen, M.↗
NASA NTRS1985

Spray Application of Rapidly Solidified Metals

Fast and economical process now available. New process applies rapidly solidified (RS) metal coatings to substrates. RS metals made directly from molten material. Have amorphous or microcrystalline structures and yield coatings having superior wear and corrosion resistance. Mixture of RS metal powder and peening particles sprayed from nozzle against surface coated. Powder and peening particles strike surface simultaneously, and impact bonds powder to surface as uniform coating. New process, which employs shot peening, is safe, fast, and inexpensive.

Chu, H. P.↗
NASA NTRS1986

Magnetron Sputtering Deposits Corrosion-Resistant Alloy

Dense, amorphous, metallic film resists corrosion attack by acid. Coatings thermally stable up to 800 degrees C and made corrosion resistant by proper choice of sputtering deposition conditions. Protective, corrosionresistant coatings applied to process equipment that comes in contact with aqueous, neutral, or acidic solutions in chemical, petroleum, and paper industries, in wastewater treatment, and in heat exchangers.

Khanna, S. K.↗
NASA NTRS1986

Process for Nonequilibrium Ternary Alloys

Proposed metallurgical process yields amorphous ternary alloys of any range of desired compositions. Process produces homogenous alloys even when proportions of constituent metals are not those that exist in equilibrium at solidification temperature. Such alloys are well suited to use in gas turbines and advanced engines.

Lutwack, R.↗
NASA NTRS1983

Deuteron NMR (Nuclear Magnetic Resonance) in relation to the glass transition in polymers

H-2NMR is introduced as a tool for investigating slow molecular motion in the glass transition region of amorphous polymers. In particular, we compare H-2 spin alignment echo spectra of chain deuterated polystyrene with model calculations for restricted rotational Brownian motion. Molecular motion in the polyztyrene-toluene system has been investigated by analyzing H-2NMR of partially deuterated polystyrene and toluene, respectively. The diluent mobility in the mixed glass has been decomposed into solid and liquid components where the respective average correlation times differ by more than 5 decades.

Roessler, E.↗
NASA NTRS1984

Ammonia formation caused by the presence of water in the wet grinding of silicon nitride powder

Si3 N4 powder (amorphous, alpha-, and beta-Si3 N4) was mixed with MeOH containing 8.87 mol. % H2O and ground. The NH3 generation rapidly increased after a grinding time of 100 hours. Silicon nitride sintered material was chosen as one of the high temperature, high strength structural materials and studies of the control of the raw material powder, preparation of the sintered body (finding the right assistant, hot press, high pressure sintering, fracture toughness and oxidation at high temperature were performed.

Kanno, Y.↗
NASA NTRS1983

Modelling of photodegradation in solar cell modules of substrate and superstrate design made with ethylene-vinyl acetate as pottant material

A computer model was developed which can generate realistic concentration versus time profiles of the chemical species formed during photooxidation of hydrocarbon polymers using as input data a set of elementary reactions with corresponding rate constants and initial conditions. The results of computer simulation have been shown to be consistent with the general experimental observations of the photooxidation of polyethylene exposed to sunlight at ambient temperatures. The useful lifetime (5% oxidation) of the unstabilized polyethylene is predicted to vary from a few months in hot weather (100 F) to almost two years in cool weather (45 F) with an apparent net activation energy of 10 kcal/mol. Modelling studies of alternate mechanisms for stabilization of clear, amorphous, linear polyethylene suggest that the optimum stabilizer would be a molecularly dispensed additive in very low concentration which can trap peroxy radicals and also decompose hydroperoxides.

Somersall, A. C.↗
NASA NTRS1982

The E-ring of Saturn

The origin of the E-ring of Saturn and its relationship to Enceladus is discussed. It is proposed that the ring is formed as a consequence of micrometeoritic and meteoritic bombardment of Enceladus. It is shown that the mass reaching the ring replaces that lost by erosion, drag and other mechanisms. The effect of the presence of amorphous ice and the possible opposition effect is indicated.

Smoluchowski, R.↗
NASA NTRS1985

Effects of wear on structure-sensitive magnetic properties of ceramic ferrite in contact with magnetic tape

Wear experiments and electron microscopy and diffraction studies were conducted to examine the wear and deformed layers in single-crystal Mn-Zn (ceramic) ferrite magnetic head material in contact with magnetic tape and the effects of that contact on magnetic properties. The crystalline state of the single-crystal magnetic head was changed drastically during the sliding process. A nearly amorphous structure was produced on its wear surface. Deformation in the surficial layer of the magnetic head was a critical factor in readback signal loss above 2.5 dB. The signal output level was reduced as applied normal load was increased. Considerable plastic flow occurred on the magnetic tape surface with sliding, and the signal loss due to the tape wear was approximately 1 dB.

Miyoshi, K.↗
NASA NTRS1985

Corrosion resistant coating

A method of coating a substrate with an amorphous metal is described. A solid piece of the metal is bombarded with ions of an inert gas in the presence of a magnetic field to provide a vapor of the metal which is deposited on the substrate at a sufficiently low gas pressure so that there is formed on the substrate a thin, uniformly thick, essentially pinhole-free film of the metal.

Khanna, S. K.↗
NASA NTRS1985

Chemical structure of interfaces

The interfacial structure of silicon/dielectric and silicon/metal systems is particularly amenable to analysis using a combination of surface spectroscopies together with a variety of chemical structures of Si/SiO2, Si/SiO2Si3N4, Si/Si2N2O, Si/SiO2/Al, and Si/Native Oxide interfaces using high resolution (0.350 eV FWHM) X ray photoelectron spectroscopy. The general structure of these dielectric interfaces entails a monolayer chemical transition layer at the Si/dielectric boundary. Amorphous Si substrates show a wide variety of hydrogenated Si and Si(OH) sub x states that are not observed in thermal oxidation of single crystal material. Extended SiO2 layers greater than 8 A in thickness are shown to be stoichiometric SiO2, but to exhibit a wide variety of local network structures. In the nitrogen containing systems, an approach to stoichiometric oxynitride compounds with interesting impurity and electron trapping properties are seen. In native oxides, substantial topographical nonuniformity in oxide thickness and composition are found. Analysis of metal/oxide interfacial layers is accomplished by analytical removal of the Si substrate by UHV XeF2 dry etching methods.

Grunthaner, F. J.↗
NASA NTRS1984

Effect of hot isostatic pressing on reaction-bonded silicon nitride

Specimens of nearly theoretical density have been obtained through the isostatic hot pressing of reaction-bonded silicon nitride under 138 MPa of pressure for two hours at 1850, 1950, and 2050 C. An amorphous phase that is introduced by the hot isostatic pressing partly accounts for the fact that while room temperature flexural strength more than doubles, the 1200 C flexural strength increases significantly only after pressing at 2050 C.

Watson, G. K.↗
NASA NTRS1984

Trapping of xenon in ice - Implications for the origin of the earth's noble gases

Although the earth's atmosphere contains Ne, Ar, and Kr in about C1,2-chondrite proportions, Xe is depleted about 20-fold. To test the suggestion that the 'missing' Xe is trapped in Antarctic ice, distribution coefficients for Xe in artifically formed frost at -20 to -60 C were measured, using Xe-127 tracer. The values are 0.098 + or - 0.004 cc STP/g atm for trapping and less than 5 cc STP/g atm for trapping plus adsorption. If these results are representative of natural ice, then the Antarctic ice cap contains less than 1 percent of the atmospheric Xe inventory, or not greater than about 0.001 the amount needed for a C1,2-chondrite pattern. Two possibilities remain for the 'missing' Xe, both on the premise that the earth's noble gases, along with other volatiles, came from chondritic material: (1) xenon is preferentially retained in the mantle and lower crust, due to the strong affinity of Xe for clean silicate surfaces and amorphous carbon; and (2) the source material of the earth's volatiles had high, relatively unfractionated, Ar/Xe and Kr/Xe ratios, like the non-carbonaceous noble gas carriers in C3O and E-chondrites.

Wacker, J. F.↗
NASA NTRS1985

Far-infrared observations of two southern H II regions - RCW 122 and G 351.6-1.3

The luminosities in excess of 1,000,000 solar luminosities obtained in the present 1-arcmin resolution mapping of the two southern H II regions RCW 122 and G 351.6-1.3 requires the presence of OB star clusters. A luminosity/unit mass of the associated cloud of about 6 solar luminosities/solar mass is obtained by combining near-IR, far-IR, and CO-emission properties for RCW 122, and it is determined that the emitting dust grains are amorphous silicate-like. G 351.6-1.3 has very similar properties, although the fraction of 1-25 micron luminosity corrected for silicate absorption is about five times less than for RCW 122.

Mcbreen, B.↗