Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Wave Energy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Toroidal Alfven Wave Coupling (Nonlinear Wave-Wave Interactions) on DIII-D

Connect DIII-D physics with space plasma phenomena. In this case of using the toroidal Alfvén eigenmodes and frequency-chirping Reversed-Shear Alfvén eignmodes in DIII-D, we will document how the nonlinear interactions among dipolar Kinetic Alfvén Wave eigenmodes in space plasmas may determine saturation levels of these fluctuations. We seek evidence of nonlinear energy transfer and wave-wave coupling during 3-wave interactions mediated by a much lower-frequency mode. In FY2019, we found evidence of nonlinear “wave-wave” interactions in 175 relevant shots of archival DIII-D data. Toroidal mode number was identified and spectrograms were produced from each shot’s Mirnov coil data. Bispectral analysis was performed using a preliminary version of a new user friendly code derived from a 1995 M.S. thesis at WVU. These results formed a part of a May 2019 M.S. thesis at WVU.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

CalWave - TEAMER UMaine 2021 Tank Testing

This is the data submission to the teamer report for RFTS1 during which tank testing at UMaine W2 tank occurred. This submission includes the relevant information and recorded data of CalWave's UMaine wave tank testing conducted under TEAMER Request for Support Round 1. During the testing CalWave assessed an autonomous control approach for changing PTO gain parameters based on "on board" sea state detection. The data submitted includes an overview of normalized PTO gains based on sea state values and for a set of 8 relevant sea states the WEC motion. All data was collected on CalWave's SCADA system and UMaine's motion tracking system. The data submitted suffices the creation of figures as shown in the PDF report submitted alongside the data and the submission includes excel sheets (parameter gains), MATLAB structures (absorber motion), and the mentioned PDF report.

16 TIDAL AND WAVE POWER↗
DOE OSTI2023

H3 StingRAY Final Design and Technical Report - Section 13 Appendices

These documents are referenced in the public version of the H3 StingRAY Final Design and Technical Report (Linked Dataset can be found in Resources section, below), and are submitted separately to allow for public release of head document. The display names have the corresponding section number for easy reference.

16 TIDAL AND WAVE POWER↗
DOE OSTI2022

Prizes Sustain NREL Water Power Innovation

The National Renewable Energy Laboratory (NREL) administers several prizes designed to encourage and support innovation that could help the water power industry grow and improve. Funded and hosted by the U.S. Department of Energy's (DOE's) Water Power Technologies Office (WPTO), these competitions run throughout the year and tap into a diverse community of contributors who leverage prize money to craft and build solutions for targeted challenges.

HYDRO ENERGY,TIDAL AND WAVE POWER↗
DOE OSTI2022

Extemporaneous Mechanochemistry: Shock-Wave-Induced Ultrafast Chemical Reactions Due to Intramolecular Strain Energy

We report regions of energy localization referred to as hotspots are known to govern shock initiation and the run-to-detonation in energetic materials. Mounting computational evidence points to accelerated chemistry in hotspots from large intramolecular strains induced via the interactions between the shock wave and microstructure. However, definite evidence mapping intramolecular strain to accelerated or altered chemical reactions has so far been elusive. From a large-scale reactive molecular dynamics simulation of the energetic material 1,3,5-triamino-2,4,6-trinitrobenzene, we map decomposition kinetics to molecular temperature and intramolecular strain energy prior to reaction. Both temperature and intramolecular strain are shown to accelerate chemical kinetics. A detailed analysis of the atomistic trajectory shows that intramolecular strain can induce a mechanochemical alteration of decomposition mechanisms. The results in this paper could inform continuum-level chemistry models to account for a wide range of mechanochemical effects.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Detecting single gravitons with quantum sensing

The quantization of gravity is widely believed to result in gravitons – particles of discrete energy that form gravitational waves. But their detection has so far been considered impossible. Here we show that signatures of single graviton exchange can be observed in laboratory experiments. We show that stimulated and spontaneous single-graviton processes can become relevant for massive quantum acoustic resonators and that stimulated absorption can be resolved through continuous sensing of quantum jumps. We analyze the feasibility of observing the exchange of single energy quanta between matter and gravitational waves. Our results show that single graviton signatures are within reach of experiments. In analogy to the discovery of the photo-electric effect for photons, such signatures can provide the first experimental clue of the quantization of gravity.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2022

Multiple electron beam generation with different energies and comparable currents from a single cathode potential for high power traveling wave tubes (TWTs)

We present a technique for generating multiple electron beams with different energies and comparable currents from a single cathode stalk at a single potential using nested magnetically insulated coaxial diodes (MICDs). The application is for a multi-stream traveling wave tube. Particle-in-cell simulations are performed for an experimental parameter-based geometry where two thin-walled intense relativistic electron beams immersed in a strong uniform magnetic field propagate through a cylindrical vacuum channel. The analytically derived results are obtained by extending Fedosov’s solution for generating a hollow electron beam from an MICD on a cathode stalk in an infinite magnetic field. Two electron beams are generated and accelerated downstream assuming zero initial kinetic energy of the electrons from the cathodes. Results show both electron beam currents ranging from 66 to 2.8 kA with an energy difference ranging from 6% to 27% depending on voltages applied from 100 to 600 kV and the geometry of the two MICDs. An optimal geometry is a crucial factor in achieving the maximum energy difference between the electron beams for comparable currents. The analytical and numerical simulation results show good agreement. We are currently in the process of planning experiments using the electron beam accelerator (SINUS-6 at UNM) to validate the analytical and simulation results.

Islam, K. N. (ORCID:0000000214397710)↗
DOE OSTI2025

High-energy $η^{(')}π$ photoproduction and the nature of exotic waves

The observation of hybrid mesons in photoproduction experiments can provide essential insight into the inner workings of quantum chromodynamics in the strong coupling regime. In particular, the study of final $η^{(')}π$ states is of great interest due to the presence of the lowest lying hybrid candidate with manifestly exotic quantum numbers, the $π_1$(1600). In this work, a double-vector exchange model with Reggeized $ρ$ and $ω$ trajectories is developed to describe the photoproduction of $η^{(')}π$ in the high-mass region. Results are presented for the differential cross sections and forward-backward asymmetries in the energy region of interest to the GlueX experiment. The model contains no free parameters, and reproduces the magnitude and t-dependence of existing CLAS data at $E_γ$ = 5 GeV. The model predicts a stronger asymmetry in the $η'π$ channel than in the $ηπ$ channel, consistent with what has previously been observed in pion beam experiments. This suggests that the sizeable production of exotic odd waves in $η'π$ is not necessarily related to the presence of gluon-rich environments. Confirmation of these predicted asymmetries from forthcoming GlueX data would enable further predictions of the low-energy spectrum.

Montaña, Glòria [Thomas Jefferson National Acceler↗
DOE OSTI2020

Quantum Monte Carlo determination of the principal Hugoniot of deuterium

Here, we present coupled electron-ion Monte Carlo results for the principal Hugoniot of deuterium together with an accurate study of the initial reference state of shock-wave experiments. We discuss the influence of nuclear quantum effects, thermal electronic excitations, and the convergence of the potential energy surface by wave-function optimization within variational Monte Carlo and projection quantum Monte Carlo methods. Compared to a previous study, our calculations also include low pressure-temperature (P,T) conditions resulting in close agreement with experimental data, while our revised results at higher (P,T) conditions still predict a more compressible Hugoniot than experimentally observed.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Speed of sound in methane under conditions of planetary interiors

We present direct observations of acoustic waves in warm dense matter. We analyze wave-number- and energy-resolved x-ray spectra taken from warm dense methane created by laser heating a cryogenic liquid jet. X-ray diffraction and inelastic free-electron scattering yield sample conditions of 0.3 ± 0.1 eV and 0.8 ± 0.1 g/ cm − 3 , corresponding to a pressure of ∼ 13 GPa. Inelastic x-ray scattering was used to observe the collective oscillations of the ions. With a highly improved energy resolution of ∼ 50 meV, we could clearly distinguish the Brillouin peaks from the quasielastic Rayleigh feature. Data at different wave numbers were utilized to derive a sound speed of 5.9 ± 0.5 km/s, marking a high-temperature data point for methane and demonstrating consistency with Birch's law in this parameter regime. Published by the American Physical Society 2024

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

An 860 MHz Wireless Surface Acoustic Wave Sensor with a Metal-Organic Framework Sensing Layer for CO2 and CH4

Wireless and passive surface acoustic wave (SAW) devices with nanoporous metal-organic framework (MOF) sensing layers are attractive gas sensors for applications in many fields such as energy industries and air pollution control. Here, we report on enhancing the sensitivity and detection limit of zeolitic imidazolate framework-8 (ZIF-8) MOF-coated SAW reflective delay line mass sensors by increasing the operating frequency for sensitive detection of carbon dioxide (CO2) and methane (CH4) at ambient conditions. In particular, we show at least four times higher sensitivity of an 860 MHz (4-μm periodicity) SAW reflective delay line coated with a 240 nm thick ZIF-8 compared to the sensitivity of a 430 MHz (8-μm periodicity) otherwise identical sensor device to the targeted gases. The detection limits of the higher frequency wireless devices for CO2 and CH4 were estimated to be 0.91 vol-% and 7.01 vol-%, respectively. The enhanced sensitivity for higher frequency devices is explained in terms of the frequency dependent acoustic wave energy confinement.

Devkota, Jagannath↗
DOE OSTI2021

Upper-Hybrid Waves Driven by Meandering Electrons Around Magnetic Reconnection X Line

Magnetic reconnection is a fundamental process in collisionless space plasma environment, and plasma waves relevant to the kinetic interactions can have a significant impact on the multiscale behavior of reconnection. Here, we present Magnetospheric Multiscale (MMS) observations during an encounter of an X line of symmetric magnetic reconnection in the magnetotail. The X line is characterized by reversals of ion and electron jets and electromagnetic fields, agyrotropic electron velocity distribution functions (VDFs), and an electron-scale current sheet. MMS observe large-amplitude nonlinear upper-hybrid (UH) waves on both sides of the neutral line, and the wave amplitudes have highly localized distribution along the normal direction. Here, the inbound meandering electrons drive the UH waves, releasing the free energy stored from the reconnection electric field along the meandering trajectories. The interaction between the meandering electrons and the UH waves may modify the balance of the reconnection electric field around the X line.

58 GEOSCIENCES↗
DOE OSTI2025

Detailed characterization of runaway electron driven whistler waves in low-density DIII-D discharges

RE-driven whistler waves during quiescent DIII-D shots have been investigated further. The waves are confirmed to be mostly perpendicularly propagating and are observed for the first time with frequencies up to 700 MHz. Phase-spectral analysis has been used to infer their toroidal mode numbers, n, which are expected to scale with the wavenumber, k, of the mode. Though we derive a theoretical scaling of k ≈ 4n, the measured mode numbers are found to exhibit a very weak dependence on k. In addition, increases in synchrotron emission have been found to consistently lag whistler wave bursts by roughly 3–5 ms, suggesting the waves are causing pitch-angle scattering, since the emitted synchrotron radiation is a strong function of the REs' perpendicular energy. The stronger the wave bursts, the greater the subsequent increase in synchrotron emission. A predator-prey model is used to describe these nonlinear wave-particle interactions, from which the wave damping rates and the loss parameter can be inferred. The damping rates are found to be of the order of (1.6 ± 0.8) × 10 4 /s, and the unitless loss parameter is found to be approximately 2, suggesting that the loss mechanism is diffusive. These observations will serve to validate models of RE-driven waves in tokamak plasmas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Wave Tank Characterization Data

This data set was collected from a 16k gallon single paddle type wave tank after adjustments were made to the transfer function in the control software. The file names describe the commanded wave height and period which can then be compared with the actual measured height and period of the generated waves.

16 TIDAL AND WAVE POWER↗
DOE OSTI2023

Observations of extreme wave runup events on the US Pacific Northwest coast

Extreme, tsunami-like wave runup events in the absence of earthquakes or landslides have been attributed to trapped waves over shallow bathymetry, long waves created by atmospheric disturbances, and long waves generated by abrupt breaking. These runup events are associated with inland excursions of hundreds of meters and periods of minutes. While the theory of radiation stress implies that nearshore energy transfer from the carrier waves to the infragravity waves can also lead to very large runup, there have not been observations of runup events induced by this process with magnitudes and periods comparable to the other three mechanisms. This work presents observations of several runup events in the US Pacific Northwest that are comparable to extreme runup events related to the other three mechanisms. It also discusses possible generation mechanisms and shows that energy transfer from carrier waves to bound infragravity waves is a plausible generation mechanism. In addition, a method to predict and forecast extreme runup events with similar characteristics is presented.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Noninvasive acoustic time-of-flight measurements in heated, hermetically-sealed high explosives using a convolutional neural network

In this work, we present a data-driven technique for measuring the time-of-flight through material sealed within a container. Time-of-flight measurement provides a noninvasive means of quantifying the sound speed profile within a material by transmitting an acoustic burst and then measuring the time required for the burst to arrive at an opposing receiver. In a hermetically-sealed cylindrical container, a portion of the acoustic energy propagates through the material as a bulk wave, while the remainder of the acoustic energy propagates around the container walls as guided waves. As a result, interference from the guided waves obscures the bulk arrival, inhibiting measurement of the sound speed. The technique uses a Convolutional Neural Network (CNN) to identify critical features in the measured waveforms and identify bulk wave arrivals. We demonstrate this time-of-flight measurement technique on high explosive-filled containers as they are heated from room temperature to detonation. This is a particularly challenging application for acoustic time-of-flight measurements as the high explosives have significant sound speed gradients as they undergo heating, and they lead to significant attenuation of the bulk wave, as opposed to the guided waves, which do not suffer significant attenuation. We characterize the performance of the CNN as a function of the high explosive temperature and as a function of the CNN hyperparameters. We then provide physical insight into the error trends.

47 OTHER INSTRUMENTATION↗
DOE OSTI2022

Utah FORGE - Development of a Reservoir Seismic Velocity Model and Seismic Resolution Study

This is data from and a final report on the development of a 3D velocity model for the larger FORGE area and on the seismic resolution in the stimulated fracture volume at the bottom of well 16A-32. The velocity model was developed using RMS velocities of the seismic reflection survey and seismic velocity logs from borehole measurements as an input model. To improve the accuracy of the model in the shallow subsurface, travel times phase arrivals of the direct propagating P-waves were determined from the seismic reflection data, using PhaseNet, a deep-neural-network-based seismic arrival time picking method. The travel times were subsequently inverted using the input velocity model. The seismic resolution study used borehole and surface seismic sensors as well as the seismicity observed during the April 2022 stimulation experiment to estimate the seismic resolution in the activated fracture reservoir. The data contain a 3D P- and S-wave velocity model for the larger FORGE area.

15 GEOTHERMAL ENERGY↗
DOE OSTI2023

On the impact of tidal generation and energy storage integration in PV-rich electric distribution systems

Deep decarbonization of power system operations requires the maximal utilization of available renewable resources. At distribution-level operations, however, grid operators can face numerous challenges in integrating renewables at scale owing to the inherent intermittence of renewable energy resources. These include phenomena such as voltage fluctuations, which are typically mitigated through control actuators such as on-load tap changers (OLTC) as well as energy storage devices, such as battery energy storage systems (BESS). On the one hand, high intermittence of the available renewable portfolio may require increasingly aggressive control of actuators, thereby accelerating the probability of equipment failure. On the other hand, integrating BESS operations and having a diverse renewable generation portfolio can typically help stagger power/energy flow to mitigate the aforementioned adverse impacts. In this paper, we employ a Bayesian framework for equipment lifetime estimation to understand the impact of including tidal energy resources and BESS in distribution system operations for feeders having substantial distribution photovoltaic generation. Our results indicate that while tidal energy alone may slightly decrease equipment reliability, the adverse impact on reliability is significantly magnified by a generation portfolio consisting of tidal generation and photovoltaic generation. Here, we also study the tidal and photovoltaic hosting capacity problem with and without energy storage systems using equipment reliability as an added constraint. We conclude that energy storage increases the reliability-constrained hosting capacity of the distribution system.

14 SOLAR ENERGY↗