Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “VS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44
All sourcesNASA NTRSDOE OSTI
NASA NTRS2015

An Overview of ISS Human Research Data Sharing

This presentation is an attempt to clarify several aspects of the current procedures, tools, and challenges of human data sharing for ISS flight activities. There are several binary variables to consider with respect to human spaceflight data sharing: Medical vs. Research, Active Flight vs. Non-Flight, Tactical vs. Supplemental, Prospective vs. Retrospective. This presentation will address each of these variables and how they determine which processes and mechanisms are used both to document and facilitate human data sharing. Some of these variables will likely be so obvious that they induce eye rolls. Please bear with us. We're trying to make these slides fairly rudimentary for a wide, (eventually) international audience. Other distinctions are made if data originated from a NASA vs. IP crewmember. Those distinctions will be made apparent when needed.

Morshedi, Pasha↗
NASA NTRSDate not supplied

In-Lab Rapid Analytical Detection of Lunar Volatiles By Universal Gas Analyzer With Comparison to GC-MS System

Introduction: The curation of permanently shadowed regions (PSRs) [1] on the lunar surface is centered around studies based upon the observed volatiles from the LCROSS mission [2]. The rapid detection of important volatile gases and vapors present in planetary bodies and Astromaterials by a standalone analytical device is an area of intense research interest in our group and Planetary Exploration & Astromaterials Research Laboratory (PEARL) facility and this work is relevant to the future preparation of viable lunar simulants for testing curation efforts down the road. The groundbreaking results obtained from the LCROSS Mission [2] open the requirements for the direct detection of volatiles present in regolith materials collected from the lunar surface. The mass spectrometry of volatile chemicals is a general technique that utilizes a set of instruments that creates charged ions from a gaseous chemical species and measures the intensities vs. mass-to-charge ratio (m/z) [3]. In this context, we discuss in-lab experimental results and procedures for rapid qualitative analysis of main LCROSS volatiles (water, H2S, NH3, CO2, and CH3OH) by a Universal Gas Analyzer (UGA) instrument. Additionally, the instrument performance was evaluated by measuring the isotopic abundance ratio of atmospheric Ar-40 to Ar-36 present in room air since, argon is a relevant gas in planetary studies as it can provide an insight and reference point to isotope studies [4]. Additional, cross comparisons were attempted and made between the two instruments to develop a robust analytical technique by comparing mass spectral data for H2S headspace samples with a Trace-1310/ ISQ 7000 (ThermoFisher Scientific.) GC-MS system. Background: The benchtop UGA System is equipped with an SRS UGA 300 quadrupole mass spectrometer designed and built by Stanford Research Systems [5]. This system can be configured for several types of gaseous chemical analysis. The inlet line continuously samples gases at low flow rates (several milliliters per minute) through a capillary limiting the intake pressure making the instrument ideal for online analysis of select gases and/or room atmosphere. Moreover, in our current UGA system, a change in composition at the inlet can be detected in about 200 milliseconds and a complete spectrum is acquired (for a range of 1-100 amu) in under 45 sec with masses measured at rates up to 25 msec per point [5]. This system provides a quick upstream analytical data that we can then compare to results obtained by our GC-MS system. Sample Preparation: Small volume (2-4 mL) of analyte sample was taken in a 10 mL glass vial and sealed with a crimped cap and purged with pure Ar or N2 gas to displace air from the top. The headspace sample was scanned by the UGA instrument at analog, histogram, and pressure vs. time modes. The isotopic abundance ratio for 40Ar-to-36Ar was estimated by measuring partial pressure vs. time scans and setting the mass at 40 and 36 respectively. Results and Discussions: In this work, we have investigated the applicability of the UGA system by qualitative analysis of a series of LCROSS volatiles measured individually. Fig. 1 demonstrates a set of vertically offset spectra for the partial pressures measured as a function of mass-to-charge (m/z) ratios. The average acquisition time for each spectrum was less than a minute suggesting that the UGA system is ideal for quick analysis of geochemical volatiles. For the cross-comparison, we analyzed an H2S headspace sample by a Trace-1310/ISQ-7000 system and compared mass spectral data with previously measured UGA histogram scan data (Fig. 2). In both cases, major peak positions are the same, however, the intensities of fragment ions ([1H132S]+ and [32S]+) are higher for UGA suggesting that the fragment ionization process is stronger in UGA compared to that of GC-MS. To investigate how the integrated area under each chromatogram varies with the headspace sample volume, a set of five H2S headspace samples with increasing volumes was analyzed by the GC-MS system (Fig. 3, inset). A small volume (e.g., 200 to 1000 µL) of H2S/H2O vapor was withdrawn from a 20 mL stock sample vial containing ~5 mL of 0.4% H2S in water by a gas-tight syringe and added to another 20 mL vial filled with argon and analyzed by the GC-MS system. Finally, the UGA detector sensitivity was evaluated by calculating the atmospheric 40Ar-to-36Ar isotopic abundance ratio in room air by running a partial pressure vs. time scan with setting the atomic mass at 40, and 36. Fig. 4(a) shows a ~25 min duration “P vs. time” scan for 40Ar (plot for 36Ar is not shown). The partial pressure values (~100 points) were corrected by subtracting the corresponding background pressure value for 37Ar and utilized to calculate 40Ar-to-36Ar isotopic abundance ratios as shown by Fig. 4b. The average isotopic abundance ratio is ~306 with a 2*STDEV ~13. This abundance ratio is significantly close to the previously reported value of 298.56 [6] and the ratio obtained by our GC-MS system (303 for a UHP grade Ar sample). Conclusions: Our study strongly evidenced that the benchtop UGA system is a valuable analytical tool for the detection of major LCROSS volatiles. The rapid scanning capability, the inexpensiveness of the whole system, and impressive detection sensitivity prove its worthiness as an essential device for advanced geochemical applications. Moreover, cross comparisons with the GC-MS provide important bridges into advanced curatorial efforts into the future. References: [1] Bickel, V.T., et al. (2021) Nat Commun 12, 5607. [2] Colaprete, A., et al. (2010) Science, 330, 463-468. [3] Glavin, D. P. et al. (2012) 2012 IEEE Aerospace Conference, 1-11. [4] Willett, C. D., et al. (2022) Geochimica et Cosmochimica Acta 329, 119-134. [5] Operation Manual and Programming Reference. (2018) Universal gas Analyzers, Stanford Research Systems. [6] Lee, J. Y., et al. (2006) Geochimica et Cosmochimica Acta 70, 4507–4512. Notes: (4 figures are attached with text as shown by the attached file)

Curation↗
NASA NTRSDate not supplied

Inter-Individual Variability in Astronaut Strength Response to Long-Duration Spaceflight May Be Dictated by In-Flight Exercise

BACKGROUND: Deconditioning induced by prolonged microgravity exposure during spaceflight hinders physical capacity. Examination of pre- to post-flight isokinetic strength measures shows that strength decreases; however, considerable variability between crewmembers exists. As in-flight exercise differs between crew, an examination of exercise training variables contributing to strength preservation is necessary. The purpose of this analysis was to examine in-flight exercise of astronauts who maintain strength compared to those with the greatest decrements in strength from pre- to post-flight. METHODS: The database of NASA International Space Station (ISS) crew who completed pre- and post-flight knee isokinetic testing (n = 87) was used to identify “responders” (R) and “non-responders” (NR) to in-flight exercise (≥ 90-day flight duration). R were those that maintained or improved strength (mean of knee extension and flexion at 60°/sec) (n = 14; 5.6 ± 7.8%), and NR were those with the most severe decrements (n = 14; -32.8 ± 4.1%) from pre- to post-flight. In-flight daily exercise records (cycle ergometer, treadmill, resistance exercise) were aggregated on a weekly basis. Independent t-tests or Mann-Whitney U tests were used to compare groups for in-flight exercise variables (i.e., frequency, time, intensity, volume). RESULTS: In-flight cycle ergometer frequency (2.4 ± 0.8 vs. 3.3 ± 1.0 days/wk; p = 0.021), total time (78.5 ± 20.4 vs. 114.0 ± 49.3 min/wk; p = 0.021), and active time (59.3 ± 17.2 vs. 86.9 ± 44.1 min/wk; p = 0.050) were greater in NR than R, but no differences for cycle intensity were observed. Treadmill distance traveled per session was greater in R than NR (4.6 ± 0.8 vs 3.6 ± 1.3 km/sess, p = 0.031), but no differences for treadmill frequency, total time, or active time were observed. Lower body resistance exercise intensity relative to pre-flight body weight was greater in R than NR (110.0 ± 16.5 vs 88.7 ± 25.0%; p = 0.012), but no differences in upper body or core resistance exercise intensity, volume, or frequency existed. CONCLUSIONS: The unique musculoskeletal loading provided by treadmill running at the expense of cycle ergometry, combined with using higher relative lower body loads during resistance training, may contribute to preserving strength in ISS crewmembers during long-duration spaceflight.

Alyssa N. Varanoske↗
NASA NTRS2022

Validation of a High-Fidelity Supersonic Parachute Inflation Dynamics Model and Best Practice

The parachute inflation dynamics (PID) of a Disk-Gap-Band (DGB) parachute system travelling at supersonic velocities in the high-altitude Earth atmosphere is simulated using a high-fidelity, multiphysics, massively-parallel computational framework. The sensitivity of the simulation results with respect to critical modelling and simulation parameters, including the fluid mechanical governing equations (Euler vs Navier-Stokes with RANS turbulence closure vs Navier-Stokes with LES turbulence closer), the interaction between the flow and the suspension lines (accounted for vs not accounted for), the dynamics of the payload (restrained vs free), and the material model of the heterogeneous fabric canopy (Saint-Venant Kirchoff vs mechanics-informed multiscale neural network), is extensively investigated. The parameter investigation is enabled by advancements to the state-of-the-art in the modelling and simulation of the supersonic parachute inflation process, which are presented as part of the computational framework. The predictive quality of the computational framework in the context of supersonic PID is validated by comparison of the simulation results with the experimental results from NASA’s Advanced Supersonic Parachute Research (ASPIRE) project. Through the validation, best practices for the modelling and simulation of supersonic PID are developed and proposed.

Rabinovitch, Jason↗
DOE OSTI2020

Blood flow imaging by optimal matching of computational fluid dynamics to 4D-flow data

Three-dimensional, time-resolved blood flow measurement (4D-flow) is a powerful research and clinical tool, but improved resolution and scan times are needed. Therefore, this study aims to (1) present a postprocessing framework for optimization-driven simulation-based flow imaging, called 4D-flow High-resolution Imaging with a priori Knowledge Incorporating the Navier-Stokes equations and the discontinuous Galerkin method (4D-flow HIKING), (2) investigate the framework in synthetic tests, (3) perform phantom validation using laser particle imaging velocimetry, and (4) demonstrate the use of the framework in vivo. An optimizing computational fluid dynamics solver including adjoint-based optimization was developed to fit computational fluid dynamics solutions to 4D-flow data. Synthetic tests were performed in 2D, and phantom validation was performed with pulsatile flow. Reference velocity data were acquired using particle imaging velocimetry, and 4D-flow data were acquired at 1.5 T. In vivo testing was performed on intracranial arteries in a healthy volunteer at 7 T, with 2D flow as the reference. Results Synthetic tests showed low error (0.4%-0.7%). Phantom validation showed improved agreement with laser particle imaging velocimetry compared with input 4D-flow in the horizontal (mean -0.05 vs -1.11 cm/s, P < .001; SD 1.86 vs 4.26 cm/s, P < .001) and vertical directions (mean 0.05 vs -0.04 cm/s, P = .29; SD 1.36 vs 3.95 cm/s, P < .001). In vivo data show a reduction in flow rate error from 14% to 3.5%. Phantom and in vivo results from 4D-flow HIKING show promise for future applications with higher resolution, shorter scan times, and accurate quantification of physiological parameters.

4D-flow MRI↗
DOE OSTI2020

Socio-Structural and Neighborhood Predictors of Incident Criminal Justice Involvement in a Population-Based Cohort of Young Black MSM and Transgender Women

Black men who have sex with men (MSM) and transgender women are disproportionately affected by criminal justice involvement (CJI) and HIV. This study recruited 618 young Black MSM and transgender women in Chicago, IL, using respondent-driven sampling between 2013 and 2014. Random effects logistic regression evaluated predictors of incident CJI over 18 months of follow-up. We report, controlling for respondent age, gender and sexual identity, spirituality (aOR 0.56, 95% CI 0.33-0.96), and presence of a mother figure (aOR 0.41, 95% CI 0.19-0.89) were protective against CJI. Economic hardship (financial or residential instability vs. neither aOR 2.23, 95% CI 1.10-4.51), two or more past episodes of CJI vs. none (aOR 2.66, 95% CI 1.40-5.66), and substance use (marijuana use vs. none aOR 2.79, 95% CI 1.23-6.34; other drug use vs. none aOR 4.49, 95% CI 1.66-12.16) were associated with CJI during follow-up. Research to identify and leverage resilience factors that can buffer the effects of socioeconomic marginalization may increase the effectiveness of interventions to address the socio-structural factors that increase the risk for CJI among Black MSM and transgender women. Given the intersection of incarceration, HIV and other STIs, and socio-structural stressors, criminal justice settings are important venues for interventions to reduce health inequities in these populations.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2025

Petrology and geochemistry of the Middle Pennsylvanian (Langsettian) Clintwood coalbed, Pike County, Kentucky

Abstract The Middle Pennsylvanian, Langsettian sub-stage Clintwood coal, along with its correlatives, was one of the more important energy resources in eastern Kentucky. The coal thickens from the NE-SW-trending Belfry anticline in central Pike County to the southeast, towards the Virginia-Kentucky border. Much of the thickness increase is in the bright lithotypes below a dull lithology. The bright lithologies transition from a bright clarain + vitrain + fusain lithology to a clarain + fusain lithology to the southeast. Half of the lithotypes in the three analyzed sections exceed 1000-µg/g Rare earth elements + Y + Sc (REYSc) (ash basis). The La N /Sm N vs. Gd N /Yb N and La N /Sm N vs. Ce N /Ce N * plots suggest that the top lithotype may have had best indication of an oxidizing environment. Positive Gd N /Gd N * and Eu N /Eu N * in some of the lithologies suggests that there may have been a hydrothermal influence in the sediment sources and/or in the diagenesis of the coal. Consideration of La N /Sm N and Zr (µg/g; ash basis), Zr vs. Sr, and V/Cr vs. inertinite/(inertinite + vitrinite) indicates that the dull lithotypes existed in a distinct geochemical environment compared to the brighter lithotypes. The isolation of the dull lithotypes from the bright lithotypes is supported by principal components analysis on inertinite/(inertinite + vitrinite), La N /Sm N , V/Cr, Sr, and either Zr or Ln(100(TiO 2 )/Al 2 O 3 ).

Hower, James C. (ORCID:0000000346942776)↗
DOE OSTI2024

Techno-economic analysis of biomass value-added processing informed by pilot scale de-ashing of paper sludge feedstock

Paper sludge biomass represents an underutilized feedstock rich in pulped and processed cellulose which is currently a waste stream with significant disposal cost to industry for landfilling services. Effective fractionation of the cellulose from paper sludge presents an opportunity to yield cellulose as feedstock for value-added processes. A novel approach to cellulose fractionation is the sidehill screening system, herein studied at the pilot-plant scale. Composition analysis determined ash removal and carbohydrate retention of both sidehill and high-performance benchtop screening systems. Sidehill screening resulted in greater carbohydrates retention relative to benchtop screening (90% vs 66%) and similar ash removal (95% vs 98%). Techno-economic analysis for production of sugar syrup yielded a minimum selling price of $331/metric ton of sugar syrup including disposal savings, significantly less than a commercial sugar syrup without fractionation. Furthermore, sensitivity analysis showed that screening conditions played a significant role in economic feasibility for cellulosic yield and downstream processes.

09 BIOMASS FUELS↗
DOE OSTI2020

The cold high-pressure approach to hydrogen delivery

In view of the very expensive and wasteful nature of today's approaches to H 2 delivery, in this work we explore the possibility of transporting cold (200 K) high pressure (875 bar) H 2 in thermally insulated trailers and dispensing H 2 directly from the trailer, with the potential to eliminate station compressor, cascade, and refrigerator, leading to major reductions in station complexity, maintenance, electricity consumption, and cost, while improving functionality by enabling essentially unlimited back to back refuels, and improving safety due to reduced H 2 expansion energy at low temperature. Detailed techno-economic analysis shows promise for substantial delivery cost reductions through cold high pressure H 2 dispensed directly from the trailer. Results indicate that: (1) Terminal operations for cold high pressure H 2 delivery are $\$$0.32/kg H 2 more expensive than for 350 bar compressed gas delivery (today's lowest cost H 2 delivery technology) due to higher level of pressurization (to 1000 bar) and chilling needs (to 165 K). (2) Trailer cost drops slightly ($\$$0.73 vs. $\$$0.81/kg H 2 for a 350 bar trailer) due to increased capacity (1035 kg H 2 delivered vs. 700 kg) compensating for increased capital cost ($\$$906,900 for cold high pressure H 2 vs. $\$$634,000 for 350 bar trailer). (3) Cold hydrogen delivery presents major advantages in fueling station cost, reduced from $\$$1.27 to $\$$0.46/kg H 2 due to elimination of major system components: compressor, cascade, and chiller. (4) Total compression cost (terminal + station) drops from $\$$0.92/kg H 2 ($\$$0.32 terminal and $\$$0.60 station) for 350 bar trailers to $\$$0.55/kg H 2 (all at the terminal) for cold high pressure H 2 . (5) Elimination of small-scale station compressors is the main contributor to reduced delivery cost due to their inefficiency, capital expense, and maintenance needs. In summary, total delivery cost reduction vs. 350 bar trailer equals $\$$0.58/kg H 2 (from $\$$2.96 to 2.38/kg H 2 ), equivalent to 24% of the total delivery cost. This large cost advantage will improve the economics of H 2 vehicles facilitating the transition to a future of zero emission transportation.

08 HYDROGEN↗
DOE OSTI2022

Life cycle analysis of polylactic acids from different wet waste feedstocks

Producing a valuable chemical product through diversion of wet wastes can simultaneously resolve the problems associated with increasing wastes and greenhouse gas emissions from conventional chemical production processes. In this work, we investigated the life-cycle greenhouse gas emissions, water, and fossil-fuel consumption for waste-derived polylactic acids (PLA) from three different waste feedstocks, namely wastewater sludge, food waste, and swine manure, using the Greenhouse Gases, Regulated Emissions, and Energy Use in Technologies (GREET) model. The decarbonization potential of replacing fossil-based resins with the waste-derived polymer was also investigated. The results show that swine manure-to-PLA pathway was the least carbon intensive (—1.4 kgCO 2 e/kg) among the three waste-to-PLA pathways on a cradle-to-grave basis, followed by the food waste case (—1.3 kgCO 2 e/kg) and then by the wastewater sludge case (0.6 kgCO 2 e/kg). In the baseline scenario, all three waste-to-PLA pathways were less carbon intensive than both fossil-based PET and HDPE on a cradle-to-grave basis: 66% (vs. PET) and 56% (vs. HDPE), 171 and 192%, 181 and 205% reduction in GHG emissions for wastewater sludge-, food waste-, and swine manure-to-PLA pathway, respectively. For all sensitivity cases investigated, the food waste- and swine manure-to-PLA pathways were significantly less carbon intensive than their fossil-counterparts. In terms of the annual decarbonization potential of replacing fossil-based PET or HDPE, the wastewater sludge- and food waste-pathway showed higher mitigation potential than the swine manure-pathway: i) 18–28 kilotons CO 2 e-reduction per year for wastewater sludge pathway; ii) 23–26 kTCO 2 e-reduction/yr for food waste pathway; and iii) about 5 kTCO 2 e-reduction/yr for swine manure pathway depending on the type of conventional resin replaced. However, given the abundant availability of the swine manure feedstocks across the United States, the decarbonization potential of swine manure-based pathway can also increase as the plant capacity or the number of plants grow.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Recrystallization suppression through dispersion-strengthening of tungsten

Tungsten is the material of choice for the divertor region of future nuclear fusion reactors, an environment that will expose plasma-facing components (e.g. divertor, etc...) to high temperatures and transient high heat flux events. Under these conditions, recrystallization and grain growth of tungsten can occur, leading to undesirable microstructural and mechanical property changes. Therefore, there is a need to raise the recrystallization temperature of tungsten and limit the kinetics of the recrystallization and grain growth processes. In this work, we examine the effect of different types (TiC vs. TaC vs. ZrC) and different concentrations (1.1 vs. 5 vs. 10 wt.%) of dispersed second phase particles in a tungsten matrix on the high temperature performance. Additionally, the addition of second-phase particles effectively increases the temperature of and time for recrystallization and slow grain growth; however, the addition of a high weight fraction of particles alters the surface chemistry, which may impact subsequent plasma-surface interactions. These results show that the addition of small concentrations of dispersed particles can be effectively employed in tungsten to raise the upper operating temperature limit for tungsten in a fusion reactor.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Flow field design for zero-gap microbial electrolysis cells using synthetic and real wastewater

Increasing performance in microbial electrolysis cells (MECs) requires the development of optimized reactor configurations with minimal internal resistance and capable to operate with real wastewater. Here, the impact of two different flow fields (serpentine and circular) was examined in zero-gap MECs with synthetic and real wastewaters. The serpentine flow field enabled a uniform distribution of the electrolyte in the anode chamber, resulting in larger current densities at lower flow rates compared to the circular flow field. Electrochemical tests using synthetic media with high buffer capacity revealed more stable and higher performance with the serpentine flow field compared to the circular flow path, producing larger current density (23.7 ± 0.8 A/m 2 vs 21.9 ± 5.6 A/m 2 ), hydrogen production rate (75.8 ± 4.1 L/L-d vs 54.3 ± 2.4 L/L-d), cathodic coulombic efficiency (>91 % vs >50 %), and an overall lower internal resistance (12.5 ± 0.5 mΩm 2 vs 14.8 ± 3.7 mΩm 2 ). Continuous operation for over 30 days with real wastewater indicated higher tolerance of the MECs with serpentine flow field toward media with large concentration of suspended solids, producing a current density of 5.4 ± 1.1 A/m 2 and a hydrogen production rate of 22.2 ± 6.2 L/L-d. Furthermore, the results presented here underscore the importance of reactor design and architecture in optimizing MEC performance for hydrogen production from liquid wastes.

flow path↗
DOE OSTI2023

A new high voltage alluaudite sodium battery insertion material

Large-scale stationary storage forms a key sector that can be economically served by sodium-ion batteries. In realizing practical sodium-ion batteries, discovery and development of novel cathodes is essential. In this spirit, alluaudite-type Na 2 Fe 2 (SO 4 ) 3 was reported in 2014 to have the highest Fe 3+ /Fe 2+ redox potential (~3.8 V vs. Na). This finding led to reports on various PO4 3– and SO4 2– based alluaudite compounds exhibiting high energy densities. In 2017, MoO 4 2– based alluaudite, Na 2.67 Mn 1.67 (MoO 4 ) 3 , was found as a 3.45 V cathode material. Exploring molybdenum chemistry further, this work reports alluaudite type Na 3.36 Co 1.32 (MoO 4 ) 3 (NCMo) as a novel versatile electroactive cathode for Li-ion and Na-ion batteries. It was synthesized by a wet solution-combustion route with a restricted annealing duration of 1 min at 600 °C. Calorimetric study revealed the formation enthalpy from component oxides (ΔH° f,ox = –575.49 ± 7.75 kJ/mol) to be highly exothermic. Unlike the sulfate class of alluaudites, this material is highly stable in air and moisture (ΔH ds = 537.42 ± 0.78 kJ/mol). Having an ionic conductivity of 6.065 × 10 –8 S/cm (at 50 °C), it offers a pseudo two-dimensional Na + migration pathway. Without any material optimization, NCMo was found to work as a high-voltage insertion cathode (ca. 4.0 V vs. Na/Na + and 4.1 V vs. Li/Li + ) in sync with theoretically predicted potential of 3.98 V (vs. Na/Na + ). Ex-situ X-ray diffraction and photoelectron spectroscopy studies revealed the occurrence of solid-solution redox mechanism solely involving Co 3+ /Co 2+ redox centre. Finally, it benchmarks Na 3.36 Co 1.32 (MoO 4 ) 3 as a novel electrochemically active Mo-based alluaudite-type polyanionic cathode insertion material.

25 ENERGY STORAGE↗
DOE OSTI2020

Simulated Biomass Sorghum GHG Reduction Potential is Similar to Maize

Policy support for cellulosic biofuels is contingent on their achieving much greater reductions in life-cycle greenhouse gas emissions than corn starch ethanol. Biomass sorghum has been suggested as a genetically and agronomically tractable feedstock species to augment near-term cellulosic feedstock production. This study used DayCent modeling to investigate biomass sorghum production emissions relative to corn with and without stover utilization at 3,265 across the rainfed United States. Sorghum produced greater average feedstock dry matter (15.6±1.4 vs. 14.8±2.2 Mg ha -1 yr -1 ) and slightly lower estimated ethanol energy yields (10.6±1.0 vs. 11.8±2.9 MJ m -2 yr -1 ) as corn grain with 75% stover collection. The high biomass removals in both the sorghum and corn stover scenarios led to soil organic carbon losses on 90% and 100% of sites, respectively. Average feedstock production emissions intensities were similar between sorghum and corn with 75% stover removal (17.6±2.8 vs. 18.8±3.0 g CO 2 e MJ -1 ), but were notably lower under sorghum for sites in the southwestern study region (13.6±3.0 vs. 22.5±3.1 g CO 2 e MJ -1 ). Futhermore, these results suggest that biomass sorghum produces cellulosic feedstock with similar emissions to corn grain and at current yield levels is unlikely to meet the Renewable Fuel Standard emissions reduction threshold for cellulosic biofuels.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Iron(III)–Oxo Cluster Chemistry with Dimethylarsinate Ligands: Structures, Magnetic Properties, and Computational Studies

A program has been initiated to develop Fe III /oxo cluster chemistry with the ‘pseudo-carboxylate’ ligand dimethylarsinate (Me 2 AsO 2 - ) for comparison with the well investigated Fe III /oxo/carboxylate cluster area. The synthesis and characterization of three polynuclear Fe III complexes are reported, [Fe 12 O 4 (O 2 C t Bu) 8 (O 2 AsMe 2 ) 17 (H 2 O) 3 ]Cl 3 (1), Na 2 [Fe 12 Na 2 O 4 (O 2 AsMe 2 ) 20 (NO 3 ) 6 (Me 2 AsO 2 H) 2 (H 2 O) 4 ](NO 3 ) 6 (2) and [Fe 3 (O 2 AsMe 2 ) 6 (Me 2 AsO 2 H) 2 (hqn) 2 ](NO 3 ) (3), where hqn is 8-hydroxyquinoline. The Fe 12 core of 1 is a type never previously encountered in Fe III carboxylate chemistry, consisting of two Fe 6 units each of which comprises two {Fe 3 (μ 3 -O 2- )} units bridged by three Me 2 AsO 2 - groups and linked into an Fe 12 loop structure by two anti-anti η 1 :η 1 :μ Me 2 AsO 2 - groups, a bridging mode extremely rare with carboxylates. 2 also consists of two Fe 6 units, differing in their ligation from those in 1, and this time linked together into a linear structure by a central {Na 2 (NO 3 ) 2 } bridging unit. 3 is a linear Fe 3 complex with no monoatomic bridges between Fe III ions, a very rare situation in Fe III chemistry with any ligands, and unprecedented in Fe carboxylate chemistry. The distinct differences observed in arsinate vs carboxylate ligation modes are rationalized largely based on the greater basicity of the former vs the latter. Variable-temperature dc and ac magnetic susceptibility data reveal all Fe 2 pairwise interactions to be antiferromagnetic. For 1 and 2, the different J ij couplings were estimated by use of a magnetostructural correlation for high nuclearity Fe III -oxo clusters and by density functional theory calculations using broken symmetry methods, allowing identification of their relative spin vector alignments and thus rationalization of their S = 0 ground states. The J ij values were then used as input values to give excellent fits of the experimental χM T vs T data. For 3, the fits of the experimental χM T vs T data to the Van Vleck equation or with PHI gave a very weak J 12 = -0.8(1) cm -1 (H = –2JŠ i ·Š j convention) between adjacent Fe III ions, and an S = 5/2 ground state. Furthermore, these initial Fe III arsinate complexes also provide structural parameters that help validate literature assignments of arsinate binding modes to iron oxide/hydroxide minerals as part of environmental concerns of using arsenic-containing herbicides in agriculture.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Highly Durable and Active Pt/Sb-Doped SnO 2 Oxygen Reduction Reaction Electrocatalysts Produced by Atomic Layer Deposition

Platinum supported on mixed-metal oxides (MMOs) are a class of active and durable cathode catalysts for proton exchange membrane fuel cell (PEMFC) due to a combination of the high oxidative stability of the supports and strong-metal-support interactions (SMSI) that enable them to exceed the activity of Pt/C. Herein, we solve a significant remaining challenge with Pt/MMO systems, namely the relatively low surface area and porosity. This is achieved by dispersing nearly-uniform Pt clusters using atomic layer deposition (ALD) on highly conductive (6.2 S/cm) and stable antimony doped tin dioxide (ATO) support. ALD-Pt/ATO exhibited significantly higher electrochemically active surface area (ECSA) (74 m 2 /g) and oxygen reduction reaction (ORR) catalytic activity (102 mA/mg Pt at 0.9 V vs. RHE) compared to Pt/ATO synthesized using ethylene glycol (ECSA=31 m 2 /g Pt , mass activity=52 mA/mg Pt at 0.9 V vs. RHE) and formic acid reduction methods (ECSA=28 m 2 /g Pt , mass activity=46 mA/mg Pt at 0.9 V vs. RHE). Further characterization showed that wet chemical methods resulted in poorer Pt particle dispersion, poor control over Pt particle size distribution and chemical degradation of the support (during Pt deposition). Given the near-ideal Pt particle size distribution of the ALD-Pt/ATO, particle size growth and loss of ECSA was found to be minimal over the course of rigorous potential cycling. Thus, after 10,000 potential cycles between 1V and 1.5V vs. RHE, ALD-Pt/ATO and other Pt/ATOs were found to retain 100% of their initial ECSA compared to 57.6% retention for Pt/C. Upon testing in a H 2 /air PEMFC, following 1,000 potential cycles, the change in ALD-Pt/ATO performance was negligible while Pt/C exhibited a 68.2% loss of initial peak power density. Thus, ALD-Pt/ATO is an active and highly durable ORR electrocatalyst in PEMFCs under start-up-shut down conditions.

25 ENERGY STORAGE↗
DOE OSTI2025

Machine Learning-Accelerated First-Principles Molecular Dynamics Reveals C–C Coupling Mechanisms toward Ethylene on Cu(100)

Here, the Cu(100) termination has been identified as the most effective facet for converting CO and CO 2 into ethylene. To enhance both the activity and selectivity of ethylene production, we perform machine-learning-accelerated, first-principles molecular dynamics simulations at 298 K in an explicit solvent at pH 7 to elucidate the C–C coupling mechanism─the critical reaction step in forming C 2+ products. Among the six potential C–C coupling pathways, the most feasible are CO* dimerization and CO – CHO* and CHO* – CHO* couplings. Using the computational hydrogen electrode method, we demonstrate that all three pathways are equally accessible at −0.6 V vs RHE. At a potential below −1.0 V vs RHE, the thermodynamic barriers for the CO – CHO* and CHO* – CHO* pathways become negligible. Our computational findings explain the experimental observations, particularly the absence of C 2+ products above −0.4 V vs RHE and the peaks in ethylene production near −0.6 and −1.0 V vs RHE. Since CHO* acts as a key intermediate common to both C–C coupling and CH 4 formation, we propose that suppressing CHO* hydrogenation would inhibit CH 4 pathways, thereby maximizing ethylene selectivity.

CO2 reduction↗