Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Transition Model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44
All sourcesNASA NTRSDOE OSTI
NASA NTRS2016

Model-Invariant Hybrid Computations of Separated Flows for RCA Standard Test Cases

NASA's Revolutionary Computational Aerosciences (RCA) subproject has identified several smooth-body separated flows as standard test cases to emphasize the challenge these flows present for computational methods and their importance to the aerospace community. Results of computations of two of these test cases, the NASA hump and the FAITH experiment, are presented. The computations were performed with the model-invariant hybrid LES-RANS formulation, implemented in the NASA code VULCAN-CFD. The model- invariant formulation employs gradual LES-RANS transitions and compensation for model variation to provide more accurate and efficient hybrid computations. Comparisons revealed that the LES-RANS transitions employed in these computations were sufficiently gradual that the compensating terms were unnecessary. Agreement with experiment was achieved only after reducing the turbulent viscosity to mitigate the effect of numerical dissipation. The stream-wise evolution of peak Reynolds shear stress was employed as a measure of turbulence dynamics in separated flows useful for evaluating computations.

Woodruff, Stephen↗
NASA NTRS1957

Boundary-Layer-Transition and Heat-Transfer Measurements from Flight Tests of Blunt and Sharp 50 Degree Cones at Mach Numbers from 1.7 to 4.7

Boundary-layer-transition and heat-transfer measurements were obtained from flight tests of blunt and sharp cones having apex angles of 50 deg. The test Mach number range was from 1.7 to 4.7, corresponding to free-stream Reynolds numbers, based on cone base diameter, of 18. 3 x 10(exp 6) and 32.1 x 10(exp 6), respectively. Transition on both models occurred at a local Reynolds number of 1 x 10(exp 6) to 2 X 10(exp 6) based on distance from the stagnation point. Transition Reynolds numbers based on momentum thickness were between 320 and 380 for the blunt cone. The model surface roughness was 25 rms microinches or greater. Turbulent heat transfer to the conical surface of the blunt cone at a Mach number of 4 was 30 percent less than that to the surface of the sharp cone. Available theories predicted heat-transfer coefficients reasonably well for the fully laminar or turbulent flow conditions.

BLUNT BODY↗
DOE OSTI2025

Pressure tuning of Kitaev spin liquid candidate Na 3 Co 2 SbO 6

The search for Kitaev’s quantum spin liquid in real materials has recently expanded with the prediction that honeycomb lattices of divalent, high-spin cobalt ions could host the dominant bond-dependent exchange interactions required to stabilize the elusive entangled quantum state. The layered honeycomb Na 3 Co 2 SbO 6 has been singled out as a leading candidate provided that the trigonal crystal field acting on Co 3d orbitals, which enhances non-Kitaev exchange interactions between $J$ eff = $\frac{1}{2}$ spin-orbital pseudospins, is reduced. Here we show that applied pressure leads to anisotropic compression of the layered structure, significantly reducing the trigonal distortion of CoO 6 octahedra. Ferromagnetic correlations between pseudospins are enhanced in the spin-polarized (3 Tesla) phase up to about 60 GPa. Higher pressures drive a high-spin to low-spin transition destroying the $J$ eff = $\frac{1}{2}$ moments required to map the spin Hamiltonian into Kitaev’s model. The spin transition strongly suppresses the low-temperature magnetic susceptibility and appears to stabilize a paramagnetic phase driven by frustration. The possible emergence of frustrated magnetism of localized $S$ = $\frac{1}{2}$ moments opens the door for exploration of novel magnetic quantum states in compressed honeycomb lattices of divalent cobaltates.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

Nonlinear dynamics and quantum chaos of a family of kicked p -spin models

Herein we introduce kicked p-spin models describing a family of transverse Ising-like models for an ensemble of spin-1/2 particles with all-to-all p-body interaction terms occurring periodically in time as delta-kicks. This is the natural generalization of the well-studied quantum kicked top (p = 2) [Haake, Kus', and Scharf, Z. Phys. B 65, 381 (1987)]. We fully characterize the classical nonlinear dynamics of these models, including the transition to global Hamiltonian chaos. The classical analysis allows us to build a classification for this family of models, distinguishing between p = 2 and p > 2, and between models with odd and even p's. Quantum chaos in these models is characterized in both kinematic and dynamic signatures. For the latter, we show numerically that the growth rate of the out-of-time-order correlator is dictated by the classical Lyapunov exponent. Finally, we argue that the classification of these models constructed in the classical system applies to the quantum system as well.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2024

Overview of Elastic Orthotropic Fiber Reinforced Polymer Modular Damage Model for Library of Advanced Materials for Engineering (LAMÉ)

This memo includes the documentation sections for the Library of Advanced Materials for Engineering (LAMÉ) manual for a fiber reinforced polymer composite damage model (Elastic_Orthotropic_FRP_Modular_Damage) in advance of the next Sierra/SM and LAMÉ release consistent with the transition of the model from development to a production capability. This new model capability provides both a set of physically based orthotropic damage criteria as well as orthotropic material softening for woven fiber reinforced polymer composite materials. The documentation sections include short sections on theory, implementation, verification, and user guidance to prescribe the model in a Sierra/SM input file.

36 MATERIALS SCIENCE↗
NASA NTRS1990

Giotto magnetic field observations at the outbound quasi-parallel bow shock of Comet Halley

The investigation of the outbound bow shock of Comet Halley using Giotto magnetometer data leads to the following results: the shock is characterized by strong magnetic turbulence associated with an increasing background magnetic field and a change in direction by 60 deg as one goes inward. In HSE-coordinates, the observed normal turned out to be (0.544, - 0.801, 0.249). The thickness of the quasi-parallel shock was 120,000 km. The shock is shown to be a new type of shock transition called a 'draping shock'. In a draping shock with high beta in the transonic transition region, the transonic region is characterized by strong directional variations of the magnetic field. The magnetic turbulence ahead of the shock is characterized by k-vectors parallel or antiparallel to the average field (and, therefore, also to the normal of the quasi-parallel shock) and almost isotropic magnetic turbulence in the shock transition region. A model of the draping shock is proposed which also includes a hypothetical subshock in which the supersonic-subsonic transition is accomplished.

Neubauer, F. M.↗
NASA NTRS1997

Ignition, Transition, Flame Spread in Multidimensional Configurations in Microgravity

Ignition of solid fuels by external thermal radiation and subsequent transition to flame spread are processes that not only are of considerable scientific interest but which also have fire safety applications. A material which undergoes a momentary ignition might be tolerable but a material which permits a transition to subsequent flame spread would significantly increase the fire hazard in a spacecraft. Therefore, the limiting condition under which flame cannot spread should be calculated from a model of the transition from ignition instead of by the traditional approach based on limits to a steady flame spread model. However, although the fundamental processes involved in ignition have been suggested there have been no definitive experimental or modeling studies due to the flow motion generated by buoyancy near the heated sample surface. In this study, microgravity experiments which required longer test times such as in air and surface smoldering experiment were conducted in the space shuttle STS-75 flight; shorter experimental tests such as in 35% and 50% oxygen were conducted in the droptower in the Japan Microgravity Center, JAMIC. Their experimental data along with theoretically calculated results from solving numerically the time-dependent Navier-Stokes equations are summarized in this paper.

Kashiwagi, Takashi↗
DOE OSTI2024

Machine Learning Accelerated First-Principles Study of the Hydrodeoxygenation of Propanoic Acid

The complex reaction network of catalytic biomass conversions often involves hundreds of surface intermediates and thousands of reaction steps, greatly hindering the rational design of metal catalysts for these conversions. Here, we present a framework of machine learning (ML)-accelerated first-principles studies for the hydrodeoxygenation (HDO) of propanoic acid over transition metal surfaces. The microkinetic model (MKM) is initially parametrized by ML-predicted energies and iteratively improved by identifying the rate-determining species and steps (RDS), computing their energies by density functional theory (DFT), and reparameterizing the MKM until all the RDS are computed by DFT. The Gaussian process (GP) model performs significantly better than the linear ridge regression model for predicting both the adsorption free energies and transition state free energies. Parameterized with energies from the GP model, only 5–20% of the full reaction network has to be computed by DFT for the MKM to possess DFT-level accuracy for the TOF and dominant reaction pathway. While the linear ridge regression model performs worse than the GP model, its performance is greatly improved when only transition states are predicted by the regression model and adsorption energies are computed by DFT. Overall, we find that a high accuracy in adsorption free energies is more important for a reliable MKM than a high accuracy in TS free energies. Lastly, based on the GP model with GOH and GCHCHCO as catalyst descriptors, we build two-dimensional volcano plots in activity and selectivity that can help design promising alloy catalysts for HDO reactions of organic acids.

adsorption↗
NASA NTRSDate not supplied

WMLES of Boundary-Layer Transition

The potential for the accurate prediction of laminar-turbulent transition by Wall-Modeled Large-Eddy Simulation (WMLES) is investigated through analysis of Direct Numerical Simulation (DNS) and WMLES results. The analysis indicates satisfactory prediction of transition by WMLES is possible, provided a) a sufficiently accurate wall model for the initial stage of transition is employed, b) a satisfactory transition is made between this initial-stage wall model and the wall model for the downstream fully-developed turbulence, and c) limitations on temporal and spatial resolution, and on the thickness of the wall-modeled region, imposed by the need to accurately resolve the disturbance waves and the transition region are observed. This is illustrated with a WMLES computation that yields reasonable agreement with DNS results; however, the wall-modeled region thickness, and thus the cost savings, is less than is typical for WMLES of fully developed turbulence.

wall-modeled large-eddy simulation, boundary-layer↗
DOE OSTI2022

Better calibration of cloud parameterizations and subgrid effects increases the fidelity of the E3SM Atmosphere Model version 1

Abstract. Realistic simulation of the Earth's mean-state climate remains a major challenge, and yet it is crucial for predicting the climate system in transition. Deficiencies in models' process representations, propagation of errors from one process to another, and associated compensating errors can often confound the interpretation and improvement of model simulations. These errors and biases can also lead to unrealistic climate projections and incorrect attribution of the physical mechanisms governing past and future climate change. Here we show that a significantly improved global atmospheric simulation can be achieved by focusing on the realism of process assumptions in cloud calibration and subgrid effects using the Energy Exascale Earth System Model (E3SM) Atmosphere Model version 1 (EAMv1). The calibration of clouds and subgrid effects informed by our understanding of physical mechanisms leads to significant improvements in clouds and precipitation climatology, reducing common and long-standing biases across cloud regimes in the model. The improved cloud fidelity in turn reduces biases in other aspects of the system. Furthermore, even though the recalibration does not change the global mean aerosol and total anthropogenic effective radiative forcings (ERFs), the sensitivity of clouds, precipitation, and surface temperature to aerosol perturbations is significantly reduced. This suggests that it is possible to achieve improvements to the historical evolution of surface temperature over EAMv1 and that precise knowledge of global mean ERFs is not enough to constrain historical or future climate change. Cloud feedbacks are also significantly reduced in the recalibrated model, suggesting that there would be a lower climate sensitivity when it is run as part of the fully coupled E3SM. This study also compares results from incremental changes to cloud microphysics, turbulent mixing, deep convection, and subgrid effects to understand how assumptions in the representation of these processes affect different aspects of the simulated atmosphere as well as its response to forcings. We conclude that the spectral composition and geographical distribution of the ERFs and cloud feedback, as well as the fidelity of the simulated base climate state, are important for constraining the climate in the past and future.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Phase Switch Driven by the Hidden Half-Ice, Half-Fire State in a Ferrimagnet

The notion of “half fire, half ice” was recently introduced to describe an exotic macroscopic ground-state degeneracy emerging in a ferrimagnet under the critical magnetic field, in which the “hot” spins are fully disordered on the sublattice with smaller magnetic moments and the “cold” spins are fully ordered on the sublattice with larger magnetic moments. Here, we further point out that this state has a twin named “half ice, half fire” in which the hot and cold spins switch positions. The new state is an excited state—thus hidden in the ground-state phase diagram—and is robust with respect to the interactions that destroy the half-fire, half-ice state. We demonstrate with exact results how this hidden state can drive phase switching at desirable finite temperature, even for the one-dimensional Ising model where phase transition at finite temperature is forbidden. Finally, we suggest that our findings may open a new door to the understanding and controlling of phase competition and transition in unconventional frustrated systems.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS2018

Nosetip Bluntness Effects on Transition at Hypersonic Speeds: Experimental and Numerical Analysis

The existing database of transition measurements in hypersonic ground facilities has established that the onset of boundary layer transition over a circular cone at zero angle of attack shifts downstream as the nosetip bluntness is increased with respect to a sharp cone. However, this trend is reversed at sufficiently large values of the nosetip Reynolds number, so that the transition onset location eventually moves upstream with a further increase in nosetip bluntness. This transition reversal phenomenon, which cannot be explained on the basis of linear stability theory, was the focus of a collaborative investigation under the NATO STO group AVT-240 on Hypersonic Boundary-Layer Transition Prediction. The current paper provides an overview of that effort, which included wind tunnel measurements in three different facilities and theoretical analysis related to modal and nonmodal amplification of boundary layer disturbances. Because neither first and second-mode waves nor entropy-layer instabilities are found to be substantially amplified to initiate transition at large bluntness values, transient (i.e., nonmodal) disturbance growth has been investigated as the potential basis for a physics based model for the transition reversal phenomenon. Results of the transient growth analysis indicate that stationary disturbances that are initiated within the nosetip or in the vicinity of the juncture between the nosetip and the frustum can undergo relatively significant nonmodal amplification and that the maximum energy gain increases nonlinearly with the nose radius of the cone. This finding does not provide a definitive link between transient growth and the onset of transition, but it is qualitatively consistent with the experimental observations that frustum transition during the reversal regime was highly sensitive to wall roughness, and furthermore, was dominated by disturbances that originated near the nosetip. Furthermore, the present analysis shows significant nonmodal growth of traveling disturbances that peak within the entropy layer and could also play a role in the transition reversal phenomenon.

Freestream Mach Number↗
DOE OSTI2020

Verification and Validation of High Explosive Reactive Burn Models Implemented in LANL's EAP and LAP Code Base

Reactive burn models represent a significant leap in high explosive (HE) modeling capability. The first generation of engineering models of HE detonation are called programmed burn models and they are largely based on the distance between a prescribed detonation point and each zone in a simulation. There have been many advancements to programmed burn models over the years and when the assumptions upon which they are based are met, a properly tuned programmed burn model can be highly accurate but if any of their assumptions is not met, as is the case for corner turning or weakly initiated HE burn, they will give the wrong answer. Reactive burn models represent an entirely new way of modeling HE burn. They use the local conditions of a zone – e.g. temperature, pressure or density – as calculated by a hydrocode to determine if and when the zone is going to detonate and if so, how rapidly. This difference opens up an entirely new set of capabilities for HE modeling. It makes it possible to accurately and predictively model phenomena like the effect of confinement and the formation of dead zones. Reactive burn models have seen sustained development effort at LANL for at least the last decade but several recent developments make it timely to transition reactive burn models from a research topic to a production tool. The main goal of this milestone is to facilitate and accelerate the adoption of reactive burn as a commonly available modeling option, with recommendations on the resolution that will be required and uncertainties associated with their modeling choices. To achieve this, we have performed verification, validation, and uncertainty quantification (UQ) assessments of AWSD and SURF/SURFplus in xRage and FLAG on a variety of different problems.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗
NASA NTRS2018

Nosetip Bluntness Effects on Transition at Hypersonic Speeds: Experimental and Numerical Analysis Under NATO STO AVT-240

The existing database of transition measurements in hypersonic ground facilities has established that the onset of boundary layer transition over a circular cone at zero angle of attack shifts downstream as the nosetip bluntness is increased with respect to a sharp cone. However, this trend is reversed at sufficiently large values of the nosetip Reynolds number, so that the transition onset location eventually moves upstream with a further increase in nosetip bluntness. This transition reversal phenomenon, which cannot be explained on the basis of linear stability theory, was the focus of a collaborative investigation under the NATO STO group AVT-240 on Hypersonic Boundary-Layer Transition Prediction. The current paper provides an overview of that effort, which included wind tunnel measurements in three different facilities and theoretical analysis related to modal and nonmodal amplification of boundary layer disturbances. Because neither first and second-mode waves nor entropy-layer instabilities are found to be substantially amplified to initiate transition at large bluntness values, transient (i.e., nonmodal) disturbance growth has been investigated as the potential basis for a physics-based model for the transition reversal phenomenon. Results of the transient growth analysis indicate that disturbances that are initiated within the nosetip or in the vicinity of the juncture between the nosetip and the frustum can undergo relatively significant nonmodal amplification and that the maximum energy gain increases nonlinearly with the nose radius of the cone. This finding does not provide a definitive link between transient growth and the onset of transition, but it is qualitatively consistent with the experimental observations that frustum transition during the reversal regime was highly sensitive to wall roughness, and furthermore, was dominated by disturbances that originated near the nosetip.

Numerical analysis↗
NASA NTRS1981

Effects of diffusion and mass flows on C IV and Si IV lines formed in the solar atmosphere

A model for the transition region is derived from an initial interpretation of EUV observations, assuming ionization equilibrium and constant elemental abundance with height. The effects of diffusion and mass flows are then included in the initial model and the emergent profiles of several C IV and Si IV lines are computed. It is found that diffusion and mass flows have a strong effect on both the emergent intensity and spectral shape of these lines. Diffusion acts to deplete the transition region of heavy ions to an extent which depends on the detailed temperature and density structure. The net effect is a weighting of the coronal emission relative to that in the transition. On the basis of the results, it is suggested that the downflows observed in the network in lines of C IV and Si IV could be due to gravitational settling of the ions following their injection, via diffusion, into the corona from spicules. When flows are superposed on the basic diffusion model, the rapid change in elemental abundance characteristic of the model is virtually eliminated and the coronal contribution to the emission in C IV and Si IV lines becomes negligible relative to that in the transition region. Flows have a strong effect on the computed line intensities and introduce large asymmetries into the line shapes.

Roussel-Dupre, R.↗
DOE OSTI2024

Hidden orders and phase transitions for the fully packed quantum loop model on the triangular lattice

Abstract Quantum loop and dimer models are prototypical correlated systems with local constraints, which are not only intimately connected to lattice gauge theories and topological orders but are also widely applicable to the broad research areas of quantum materials and quantum simulation. Employing our sweeping cluster quantum Monte Carlo algorithm, we reveal the complete phase diagram of the triangular-lattice fully packed quantum loop model. Apart from the known lattice nematic (LN) solid and the even$${{\mathbb{Z}}}_{2}$$ Z 2 quantum spin liquid (QSL) phases, we discover a hidden vison plaquette (VP) phase, which had been overlooked and misinterpreted as a QSL for more than a decade. Moreover, the VP-to-QSL continuous transition belongs to the (2 + 1)D cubic * universality class, which offers a lattice realization of the (fractionalized) cubic fixed point that had long been considered as irrelevant towards the O(3) symmetry until corrected recently by conformal bootstrap calculations. Our results are therefore of relevance to recent developments in both experiments and theory, and facilitate further investigations of hidden phases and transitions.

Physics↗
DOE OSTI2020

State preparation and measurement in a quantum simulation of the $O(\mathrm{3})$ sigma model

Recently, Singh and Chandrasekharan [Phys. Rev. D 100, 054505 (2019)] showed that fixed points of the nonlinear O ( 3 ) sigma model can be reproduced near a quantum phase transition of a spin model with just two qubits per lattice site. In a paper by the NuQS Collaboration [Phys. Rev. Lett. 123, 090501 (2019)], the proposal is made to simulate such field theories on a quantum computer using the universal properties of a similar model. In this paper, following that direction, we demonstrate how to prepare the ground state of the model from Singh and Chandrasekharan and measure a dynamical quantity of interest, the O ( 3 ) Noether charge, on a quantum computer. In particular, we apply Trotter methods to obtain results for the complexity of adiabatic ground state preparation in both the weak-coupling and quantum-critical regimes and use shadow tomography to measure the dynamics of local observables. Finally, we then present and analyze a quantum algorithm based on nonunitary randomized simulation methods that may yield an approach suitable for intermediate-term noisy quantum devices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2023

Evidence for Bootstrap Percolation Dynamics in a Photoinduced Phase Transition

Upon intense femtosecond photo-excitation, a many-body system can undergo a phase transition through a non-equilibrium route, but understanding these pathways remains an outstanding challenge. Here, we use time-resolved second harmonic generation to investigate a photo-induced phase transition in Ca 3 Ru 2 O 7 and show that mesoscale inhomogeneity profoundly influences the transition dynamics. We observe a marked slowing down of the characteristic time τ that quantifies the transition between two structures. τ evolves non-monotonically as a function of photo-excitation fluence, rising from below 200 fs to ~1.4 ps, then falling again to below 200 fs. To account for the observed behavior, we perform a bootstrap percolation simulation that demonstrates how local structural interactions govern the transition kinetics. Finally, our work highlights the importance of percolating mesoscale inhomogeneity in the dynamics of photo-induced phase transitions and provides a model that may be useful for understanding such transitions more broadly.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗