Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Topological properties”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

Computational Study of Oxidative Etch Pitting in FiberForm and the Effect on Its Material Properties

Erosion of carbon due to oxidation does not occur uniformly but through the formation of localized etch pits because of active surface sites. These active sites are formed due to the presence of atomic defects on the carbon surface, and have much higher reactivity compared to average non-defective sites. Thus, these active sites are first to react during ablation, resulting in their removal. This causes all the neighboring atoms to be defective and increase their reactivity, thus leading to the localized carbon removal around these “active” sites. In this manner, these highly reactive defective sites serve as nucleation sites for the formation and growth of etch pits with potentially detrimental effects on the structural integrity. In order to understand the influence of these etch pits on the material properties of carbon fiber microstructures, we have developed a new capability within direct simulation Monte Carlo (DSMC) to capture the etch pit formation process. This capability is developed within the DSMC code SPARTA (Stochastic PArallel Rarefied-gas Time-accurate Analyzer) and can model the material removal in presence of active sites leading to the formation of etch pits. The focus of the current work will be to study the effect of etch pits on the material properties of FiberForm, a commonly used base material within many thermal protection system materials (TPS). The microstructure of virgin FiberForm obtained directly from X-ray microtomography experiments is used within SPARTA to obtain the ablated geometries with etch pits. These pitted microstructures are then imported within the Porous Microstructure Analysis (PuMA) software and various material properties such as elasticity, thermal conductivity, and permeability are computed. The variation of these properties as a result of the complex evolution of the surface topology due to etch pit formation is studied and analyzed. Furthermore, the effect of pitting is compared to the case of shrinking fibers, which has been the standard for modelling ablation of carbon structures; and significant differences are observed. Thus, such a physically realistic modeling of material removal through the formation of etch pits will be helpful in predicting the degradation of carbon-based TPS more accurately during oxidation; as well as other mechanisms such as spallation, which involves the removal of chunks of material into the flow due to etch pit growth. This will ultimately improve our understanding of the failure modes in these materials due to ablation.

Carbon Ablators↗
NASA NTRSDate not supplied

Computational Study of Oxidative Etch Pitting in FiberForm and the Effect on Its Material Properties

Erosion of carbon due to oxidation does not occur uniformly but through the formation of localized etch pits because of active surface sites. These active sites are formed due to the presence of atomic defects on the carbon surface, and have much higher reactivity compared to average non-defective sites. Thus, these active sites are first to react during ablation, resulting in their removal. This causes all the neighboring atoms to be defective and increase their reactivity, thus leading to the localized carbon removal around these “active” sites. In this manner, these highly reactive defective sites serve as nucleation sites for the formation and growth of etch pits with potentially detrimental effects on the structural integrity. In order to understand the influence of these etch pits on the material properties of carbon fiber microstructures, we have developed a new capability within direct simulation Monte Carlo (DSMC) to capture the etch pit formation process. This capability is developed within the DSMC code SPARTA (Stochastic PArallel Rarefied-gas Time-accurate Analyzer) and can model the material removal in presence of active sites leading to the formation of etch pits. The focus of the current work will be to study the effect of etch pits on the material properties of FiberForm, a commonly used base material within many thermal protection system materials (TPS). The microstructure of virgin FiberForm obtained directly from X-ray microtomography experiments is used within SPARTA to obtain the ablated geometries with etch pits. These pitted microstructures are then imported within the Porous Microstructure Analysis (PuMA) software and various material properties such as elasticity, thermal conductivity, and permeability are computed. The variation of these properties as a result of the complex evolution of the surface topology due to etch pit formation is studied and analyzed. Furthermore, the effect of pitting is compared to the case of shrinking fibers, which has been the standard for modelling ablation of carbon structures; and significant differences are observed. Thus, such a physically realistic modeling of material removal through the formation of etch pits will be helpful in predicting the degradation of carbon-based TPS more accurately during oxidation; as well as other mechanisms such as spallation, which involves the removal of chunks of material into the flow due to etch pit growth. This will ultimately improve our understanding of the failure modes in these materials due to ablation.

Carbon Ablators↗
DOE OSTI2023

Ultrafast terahertz emission from emerging symmetry-broken materials

Abstract Nonlinear optical spectroscopies are powerful tools for investigating both static material properties and light-induced dynamics. Terahertz (THz) emission spectroscopy has emerged in the past several decades as a versatile method for directly tracking the ultrafast evolution of physical properties, quasiparticle distributions, and order parameters within bulk materials and nanoscale interfaces. Ultrafast optically-induced THz radiation is often analyzed mechanistically in terms of relative contributions from nonlinear polarization, magnetization, and various transient free charge currents. While this offers material-specific insights, more fundamental symmetry considerations enable the generalization of measured nonlinear tensors to much broader classes of systems. We thus frame the present discussion in terms of underlying broken symmetries, which enable THz emission by defining a system directionality in space and/or time, as well as more detailed point group symmetries that determine the nonlinear response tensors. Within this framework, we survey a selection of recent studies that utilize THz emission spectroscopy to uncover basic properties and complex behaviors of emerging materials, including strongly correlated, magnetic, multiferroic, and topological systems. We then turn to low-dimensional systems to explore the role of designer nanoscale structuring and corresponding symmetries that enable or enhance THz emission. This serves as a promising route for probing nanoscale physics and ultrafast light-matter interactions, as well as facilitating advances in integrated THz systems. Furthermore, the interplay between intrinsic and extrinsic material symmetries, in addition to hybrid structuring, may stimulate the discovery of exotic properties and phenomena beyond existing material paradigms.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Pressure engineering of intertwined phase transitions in lanthanide monopnictide NdSb

Coexistence of non-trivial band topology and intrinsic magnetic order not only leads to emergent phenomena but also allows for the tunability of the exotic properties from different degrees of freedom. By performing transport measurements at synergetic extreme conditions, here we report on pressure engineering of intertwined structural, magnetic, and topological phase transitions in antiferromagnetic Dirac semimetal NdSb. We show that the original antiferromagnetic state is strengthened in the low pressure region while destabilized upon further compression close to the critical pressure when a structural transition from Fm-3m phase to P4/mmm phase takes place at P C ~ 18 GPa, forming a Ger-shaped evolution in response to magnetic field, pressure and temperature. Concomitant with the structural transition, NdSb simultaneously carries on a magnetic transition to the ferromagnetic state. Further, theoretical calculations unravel that the ferromagnetic tetragonal phase presents nontrivial features of Weyl fermions. These findings offer new important insight into the microscopic interplay among lattice, spin, and relativistic fermions in lanthanide monopnictides.

42 ENGINEERING↗
DOE OSTI2022

Electronic Topological Transition as a Route to Improve Thermoelectric Performance in Bi 0.5 Sb 1.5 Te 3

The electronic structure near the Fermi surface determines the electrical properties of the materials, which can be effectively tuned by external pressure. Bi0.5Sb1.5Te3 is a p-type thermoelectric material which holds the record high figure of merit at room temperature. Here it is examined whether the figure of merit of this model system can be further enhanced through some external parameter. With the application of pressure, it is surprisingly found that the power factor of this material exhibits λ behavior with a high value of 4.8 mW m –1 K –2 at pressure of 1.8 GPa. Such an enhancement is found to be driven by pressure-induced electronic topological transition, which is revealed by multiple techniques. Together with a low thermal conductivity of about 0.89 W m –1 K –1 at the same pressure, a figure of merit of 1.6 is achieved at room temperature. The results and findings highlight the electronic topological transition as a new route for improving the thermoelectric properties.

36 MATERIALS SCIENCE↗
NASA NTRS1982

Topological analysis of computed three-dimensional viscous flow fields

Computed solutions of the time-dependent, Reynolds-averaged Navier-Stokes equations for three dimensional flows having thin shear layers are analyzed using topological concepts. Specific examples include the transonic flow over a body of revolution with conical afterbody at moderate angles of incidence to the free stream. Experimental flow-visualization techniques are simulated graphically to visualize the computed flow. Scalar and vector fluid dynamics properties such as pressure, shear stress, and vorticity on the body surface are presented as topological maps, and their relationship to one another in terms of orientation and singular points is discussed. The extrapolation from these surface topologies toward the understanding of external flow-field behavior is and demonstrated.

Deiwert, G. S.↗
NASA NTRS1982

Topological analysis of computed three-dimensional viscous flow fields

Computed solutions of the time-dependent, Reynolds-averaged Navier-Stokes equations for three-dimensional flows having thin shear layers are analyzed, using topological concepts. Specific examples include the transonic flow over a body of revolution with conical afterbody at moderate angles of incidence to the free stream. Experimental flow-visualization techniques are simulated graphically to visualize the computed flow. Scalar and vector fluid dynamic properties, such as pressure, shear stress, and vorticity on the body surface, are presented as topological maps, and their relationship to one another in terms of orientation and singular points is discussed. The extrapolation from these surface topologies toward the understanding of external flow-field behavior is discussed and demonstrated.

Deiwert, G. S.↗
DOE OSTI2026

Evolution of Electronic Properties of Graphene Nanoribbons with Progressive Carving: From Straight to Porous to Chevron Ribbons

Graphene nanoribbons (GNRs) are highly versatile materials due to their unique electronic, magnetic, and optical properties, which can be precisely tuned by controlling their width, edge structure, and topology. Here, we report the on-surface synthesis and characterization of a straight N = 15 armchair GNR with periodic annulene nanopores (15-pGNR). It serves as a structural link between two well-established GNRs: the pristine N = 15 armchair GNR without pores (15-AGNR) and the chevron GNR (cGNR). With the addition of the 15-pGNR reported in this study, these three GNRs form a rare experimentally accessible series of ribbons, in which the evolution of electronic properties can be tracked upon progressive carving of a basic 15-AGNR: first, by creating periodic nanopores to form 15-pGNR and then by extending the pore area and producing meandering cGNR. We have designed a molecular precursor for the 15-pGNR and grown the nanoribbons on single-crystal gold substrates by on-surface synthesis in ultra-high vacuum (UHV) conditions. The atomically precise structure of 15-pGNR was confirmed by scanning tunneling microscopy (STM) and non-contact atomic force microscopy (nc-AFM). The band gap of 15-pGNR was studied by scanning tunneling spectroscopy (STS) and dI/dV mapping, and the occupied electronic levels were investigated by angle-resolved photoemission spectroscopy (ARPES). A theoretical and experimental comparison of 15-pGNRs, 15-AGNRs, and cGNRs demonstrates that the introduction of periodic nanopores into 15-AGNR leads to a more than 2-fold increase in its band gap. In contrast, the band gaps of 15-pGNR and cGNR differ only by about 15%. Such band gap increase can be qualitatively understood to arise from two combined effects, the periodic perforation of the graphene lattice and the confinement effect induced by the GNR width.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2023

A comprehensive model of Drosophila epithelium reveals the role of embryo geometry and cell topology in mechanical responses

In order to understand morphogenesis, it is necessary to know the material properties or forces shaping the living tissue. In spite of this need, very few in vivo measurements are currently available. Here, using the early Drosophila embryo as a model, we describe a novel cantilever-based technique which allows for the simultaneous quantification of applied force and tissue displacement in a living embryo. By analyzing data from a series of experiments in which embryonic epithelium is subjected to developmentally relevant perturbations, we conclude that the response to applied force is adiabatic and is dominated by elastic forces and geometric constraints, or system size effects. Crucially, computational modeling of the experimental data indicated that the apical surface of the epithelium must be softer than the basal surface, a result which we confirmed experimentally. Further, we used the combination of experimental data and comprehensive computational model to estimate the elastic modulus of the apical surface and set a lower bound on the elastic modulus of the basal surface. More generally, our investigations revealed important general features that we believe should be more widely addressed when quantitatively modeling tissue mechanics in any system. Specifically, different compartments of the same cell can have very different mechanical properties; when they do, they can contribute differently to different mechanical stimuli and cannot be merely averaged together. Additionally, tissue geometry can play a substantial role in mechanical response, and cannot be neglected.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Enhanced Selectivity and Stability of Finned Ferrierite Catalysts in Butene Isomerization

Abstract Designing zeolite catalysts with improved mass transport properties is crucial for restrictive networks of either one‐ or two‐dimensional pore topologies. Here, we demonstrate the synthesis of finned ferrierite (FER), a commercial zeolite with two‐dimensional pores, where protrusions on crystal surfaces behave as pseudo nanoparticles. Catalytic tests of 1‐butene isomerization reveal a 3‐fold enhancement of catalyst lifetime and an increase of 12 % selectivity to isobutene for finned samples compared to corresponding seeds. Electron tomography was used to confirm the identical crystallographic registry of fins and seeds. Time‐resolved titration of Brønsted acid sites confirmed the improved mass transport properties of finned ferrierite compared to conventional analogues. These findings highlight the advantages of introducing fins through facile and tunable post‐synthesis modification to impart material properties that are otherwise unattainable by conventional synthesis methods.

Dai, Heng↗
DOE OSTI2024

Diagnostics of Mixed-State Topological Order and Breakdown of Quantum Memory

Topological quantum memory can protect information against local errors up to finite error thresholds. Such thresholds are usually determined based on the success of decoding algorithms rather than the intrinsic properties of the mixed states describing corrupted memories. Here we provide an intrinsic characterization of the breakdown of topological quantum memory, which both gives a bound on the performance of decoding algorithms and provides examples of topologically distinct mixed states. We employ three information-theoretical quantities that can be regarded as generalizations of the diagnostics of ground-state topological order, and serve as a definition for topological order in error-corrupted mixed states. We consider the topological contribution to entanglement negativity and two other metrics based on quantum relative entropy and coherent information. In the concrete example of the two-dimensional (2D) Toric code with local bit-flip and phase errors, we map three quantities to observables in 2D classical spin models and analytically show they all undergo a transition at the same error threshold. This threshold is an upper bound on that achieved in any decoding algorithm and is indeed saturated by that in the optimal decoding algorithm for the Toric code. Published by the American Physical Society 2024

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Bogoliubov Fermi surfaces in spin-$\frac{1}{2}$ systems: Model Hamiltonians and experimental consequences

Bogoliubov Fermi surfaces (BFSs) are topologically protected regions of zero energy excitations in a superconductor whose dimension equals that of the underlying normal state Fermi surface. Examples of Hamiltonians exhibiting this “ultranodal” phase are known to preserve charge-conjugation ($\textit{C}$) and parity ($\textit{P}$) but break time-reversal ($\textit{T}$). In this work, we provide examples of model Hamiltonians that do not necessarily preserve this symmetry pattern but have well-defined sign-changing Pfaffians yielding BFSs. While their topological character has not been recognized previously, some of the models we present have been extensively studied in prior literature. Here, we further examine thermodynamic and electronic properties arising from the ultranodal state. In particular, we study the effect of a weak Zeeman field close to the topological transition and propose distinguishing features of BFSs using residual specific heat and tunneling conductance. Our calculation of the superfluid density in a toy multiband model indicates a window of interband pairing strength where BFSs are stable with a positive superfluid density. We also present additional signatures of BFSs in spin-polarized spectral weight and total magnetization measurements.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Hysteretic Responses of Skyrmion Lattices to Electric Fields in Magnetoelectric Cu 2 OSeO 3

Electric field control of topologically nontrivial magnetic textures, such as skyrmions, provides a paradigm shift for future spintronics beyond current silicon-based technology. While significant progress has been made by X-ray and neutron scattering studies, direct observation of such nanoscale spin structures and their dynamics driven by external electric fields remains a challenge to understand underlying mechanisms and harness functionalities. Here, using Lorentz transmission electron microscopy combined with in situ electric and magnetic fields at liquid helium temperatures, we report the crystallographic-orientation dependent skyrmion responses to electric fields in thin slabs of magnetoelectric Cu 2 OSeO 3 . We show electric fields not only stabilize the hexagonally packed skyrmion lattices in the entire sample in a hysteretic manner but also induce the rotation of their reciprocal vector discretely by 30°. Furthermore, the nonvolatile and energy-efficient skyrmion-lattice control by electric fields demonstrated in this work provides an important foundation for designing skyrmion-based qubits and memory devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Magnetic and transport properties of Fe-doped Weyl semimetal Co 3 Sn 2 S 2

Ferromagnetic Weyl semimetal Co 3 Sn 2 S 2 has recently attracted a lot of interest on account of its large non-saturating magnetoresistance and the high carrier mobility common to topological semimetals. Moreover, the material also provides a platform for studying the interplay between the intrinsic magnetism and topological band structures, which generates a significant anomalous Hall effect. Chemical doping is the usual approach to adjust materials’ properties, and it can lead to fascinating results. Here, we present the influence of Fe-doping on the magnetic and transport properties of polycrystalline Co 3 Sn 2 S 2 . The Fe-doping suppresses the sample’s magnetic order, increases the electrical resistivity, results in a skew-scattering contribution to the anomalous Hall effect and Fe impurities cause the Kondo effect. In addition, we report on the impact of Fe-doping on the magnetoresistance of Co 3 Sn 2 S 2 , where Fe-doping leads to a dramatic decline in magnetoresistance. Furthermore, the hysteresis behavior in the low magnetic field region, detected previously in nanoflake samples only, is observed in both pure and Fe-doped Co 3 Sn 2 S 2 bulk samples. Finally, our findings serve as a reference and source of inspiration for future chemical doping research on topological semimetals.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Local Inversion Symmetry Breaking and Thermodynamic Evidence for Ferrimagnetism in Fe 3 GaTe 2

The layered compound Fe 3 GaTe 2 is attracting attention due to its high Curie temperature, low dimensionality, and the presence of topological spin textures above room temperature, making Fe 3 GaTe 2 a good candidate for applications in spintronics. Here, in this study, we show, through transmission electron microscopy (TEM) techniques, that Fe 3 GaTe 2 single crystals break local inversion symmetry while maintaining global inversion symmetry according to X-ray diffraction. Coupled to the observation of Néel skyrmions via Lorentz-TEM, our structural analysis provides a convincing explanation for their presence in centrosymmetric materials. Magnetization measurements as a function of the temperature displays a sharp first-order thermodynamic phase-transition leading to a reduction in the magnetic moment. This implies that the ground state of Fe 3 GaTe 2 is globally ferrimagnetic and not a glassy magnetic state composed of ferrimagnetic, and ferromagnetic domains as previously claimed. Neutron diffraction studies indicate that the ferromagnetic to ferrimagnetic transition upon reducing the external magnetic field is associated with a change in the magnetic configuration/coupling between Fe1 and Fe2 moments. We observe a clear correlation between the hysteresis observed in both the skyrmion density and the magnetization of Fe 3 GaTe 2 . This indicates that its topological spin textures are affected by the development of ferrimagnetism upon cooling. Observation, via magnetic force microscopy, of magnetic bubbles at the magnetic phase boundary suggests skyrmions stabilized by the competition among magnetic phases and distinct exchange interactions. Our study provides an explanation for the observation of Néel skyrmions in centrosymmetric systems, while exposing a correlation between the distinct magnetic phases of Fe 3 GaTe 2 and topological spin textures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

A Kinetic Monte Carlo Approach for Simulating Cascading Transmission Line Failure

In this work, cascading transmission line failures are studied through a dynamical model of the power system operating under fixed conditions. The power grid is modeled as a stochastic dynamical system where first-principles electromechanical dynamics are excited by small Gaussian disturbances in demand and generation around a specified operating point. In this context, a single line failure is interpreted in a large deviation context as a first escape event across a surface in phase space defined by line security constraints. The resulting system of stochastic differential equations admits a transverse decomposition of the drift, which leads to considerable simplification in evaluating the quasipotential (rate function) and, consequently, computation of exit rates. Tractable expressions for the rate of transmission line failure in a restricted network are derived from large deviation theory arguments and validated against numerical simulations. Extensions to realistic settings are considered, and individual line failure models are aggregated into a Markov model of cascading failure inspired by chemical kinetics. Cascades are generated by traversing a graph composed of weighted edges representing transitions to degraded network topologies. Numerical results indicate that the Markov model can produce cascades with qualitative power-law properties similar to those observed in empirical cascades.

Kinetic Monte Carlo, rare events, Cascading Failur↗
DOE OSTI2021

Logarithmic criticality in transverse thermoelectric conductivity of the ferromagnetic topological semimetal CoMnSb

Here we report the results of our experimental studies on the magnetic, transport, and thermoelectric properties of the ferromagnetic metal CoMnSb. A sizable anomalous Hall conductivity $σ_{yx}$ and transverse thermoelectric conductivity $α_{yx}$ are found experimentally and comparable in size to the values estimated from first-principles calculation. Our experiment further reveals that CoMnSb exhibits -T log T critical behavior in $α_{yx}$ (T), deviating from Fermi liquid behavior $α_{yx}$ ~ T over a decade of temperature between 10 and 400 K, similar to ferromagnetic Weyl and nodal-line semimetals. Our theoretical calculation for CoMnSb also predicts the - T log T behavior when the Fermi energy locates near the Weyl nodes in momentum space.

36 MATERIALS SCIENCE↗