Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “TAPE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44
All sourcesNASA NTRSDOE OSTI
NASA NTRS1991

Airborne rescue system

The airborne rescue system includes a boom with telescoping members for extending a line and collar to a rescue victim. The boom extends beyond the tip of the helicopter rotor so that the victim may avoid the rotor downwash. The rescue line is played out and reeled in by winch. The line is temporarily retained under the boom. When the boom is extended, the rescue line passes through clips. When the victim dons the collar and the tension in the line reaches a predetermined level, the clips open and release the line from the boom. Then the rescue line can form a straight line between the victim and the winch, and the victim can be lifted to the helicopter. A translator is utilized to push out or pull in the telescoping members. The translator comprises a tape and a rope. Inside the telescoping members the tape is curled around the rope and the tape has a tube-like configuration. The tape and rope are provided from supply spools.

Haslim, Leonard A.↗
NASA NTRS1992

Development of high T(sub c) (greater than 110 K) Bi, Tl, and Y-based materials as superconducting circuit elements

Experimental work has continued on the development and characterization of bulk and hot pressed powders and tapecast materials in the Bi-Sr-Ca-Cu-O and Tl-Ba-Ca-Cu-O systems. A process for producing warp-free, sintered, superconducting tapes of Bi composition Bi2Sr2Ca2Cu3O(x) with a mixed oxide process was established. This procedure required a triple calcination at 830 C for 24 hours and sintering at 845 C from 20 to 200 hours. Hot pressing the triple calcined powder at 845 C for 6 hours at 5000 psi yielded a dense material which on further heat treatment at 845 C for 24 hours exhibited a Tc of 108.2 K. A further improvement in the processing of the bismuth materials was achieved via a chemical coprecipitation process wherein the starting nitrate materials were coprecipitated with oxalic acid, thus yielding a more chemically homogeneous, more reactive powder. With the coprecipitated powders, only one calcine at 830 C for 12 hours and a final sinter at 845 C for 30 hours was sufficient to produce a bulk superconducting material with a Tc of 108.4 K. SAFIRE-type grounding links were successfully fabricated from sintered, tapecast, coprecipitated BSCCO 2223 powders. Compositional and processing investigations were continued on the Tl-based superconductors. Manganese and lithium additions and sintering temperature and time were examined to determine their influence on superconducting properties. It was found that lithium substitutions for copper enhance the transition temperatures while manganese additions produced deleterious effects on the superconducting properties. A suitable procedure for producing reproducible bulk and tapecast material of Tl composition Tl2Ba2Ca2Cu3O(x) was developed and used in fabricating uniform superconducting tapes. The highest transition temperature for Tl-based tapes was measured at 110.2 K. Thallium superconducting SAFIRE-type grounding links were fabricated from the tapes.

Haertling, Gene H.↗
NASA NTRS1992

Flush mounting of thin film sensors

Flush mounting of a sensor on a surface is provided by first forming a recessed area on the surface. Next, an adhesive bonding mixture is introduced into the recessed area. The adhesive bonding mixture is chosen to provide thermal expansion matching with the surface surrounding the recessed area. A strip of high performance polymeric tape is provided, with the sensor attached to the underside thereof, and the tape is positioned over the recessed area so that it acts as a carrier of the sensor. A shim having flexibility so that it will conform to the surface surrounding the recessed area is placed over the tape, and a vacuum pad is placed over the shim. The area above the surface is then evacuated while holding the sensor flush with the surface during curing of the adhesive bonding mixture. After such curing, the pad, shim, and tape are removed from the sensor, electrical connections for the sensor are provided, after which the remaining space in the recessed area is filled with a polymeric foam.

Moore, Thomas C., Sr.↗
NASA NTRS1992

SAGE 1 data user's guide

A guide for using the data products from the Stratospheric Aerosol and Gas Experiment 1 (SAGE 1) for scientific investigations of stratospheric chemistry related to aerosol, ozone, nitrogen dioxide, dynamics, and climate change is presented. A detailed description of the aerosol profile tape, the ozone profile tape, and the nitrogen dioxide profile tape is included. These tapes are the SAGE 1 data products containing aerosol extinction data and ozone and nitrogen dioxide concentration data for use in the different scientific investigations. Brief descriptions of the instrument operation, data collection, processing, and validation, and some of the scientific analyses that were conducted are also included.

Mcmaster, Leonard R.↗
NASA NTRS1992

Open hole and postimpact compressive fatigue of stitched and unstitched carbon-epoxy composites

The performance is studied of a stitched uniweave fabric composite and that of a toughened tape composite. The effects of stitching on compression fatigue life are addressed. Post impact compression fatigue and open hole fatigue tests were run on an AS4/3501-6 uniweave with stitching and a toughened IM7/8551-7 tape without stitching. Stitching was found to increase the thickness and consequently the weight of the composite material. The two materials were compared on an equal carbon content basis as well as on an equal weight basis. The excess thickness in the stitched uniweave composite was responsible for the lower fatigue life, on an equal carbon basis, compared to the toughened resin tape composite. Comparison of fatigue lives on an equal carbon content basis indicated that puncture or crimp type damage from stitching has very little effect on compression failure. Post impact fatigue test showed that although the damage area in the stitched uniweave composite was twice that of the toughened tape composite, the fatigue lives of the stitched composite were significantly longer than those of the toughened composite. Thus, it appears that the increase in thickness from stitching is much more of a penalty than crimped fibers or puncture type damage from stitching.

Portanova, Marc A.↗
NASA NTRS1992

The preservation of LANDSAT data by the National Land Remote Sensing Archive

Digital data, acquired by the National Landsat Remote Sensing Program, document nearly two decades of global agricultural, environmental, and sociological change. The data were widely applied and continue to be essential to a variety of geologic, hydrologic, agronomic, and strategic programs and studies by governmental, academic, and commercial researchers. Landsat data were acquired by five observatories that use primarily two digital sensor systems. The Multispectral Scanner (MSS) was onboard all five Landsats, which have orbited over 19 years; the higher resolution Thematic Mapper (TM) sensor acquired data for the last 9 years on Landsats 4 and 5 only. The National Land Remote Sensing Archive preserves the 800,000 scenes, which total more than 60 terabytes of data, on master tapes that are steadily deteriorating. Data are stored at two terabytes of data, on master tapes that are steadily deteriorating. Data are stored at two locations (Sioux Falls, South Dakota and Landover, Maryland), in three archive formats. The U.S. Geological Survey's EROS Data Center has initiated a project to consolidate and convert, over the next 4 years, two of the archive formats from antiquated instrumentation tape to rotary-recorded cassette magnetic tape. The third archive format, consisting of 300,000 scenes of MSS data acquired from 1972 through 1978, will not be converted because of budgetary constraints. This data preservation project augments EDC's experience in data archiving and information management, expertise that is critical to EDC's role as a Distributed Active Archive Center for the Earth Observing System, a new and much larger national earth science program.

Boyd, John E.↗
NASA NTRS1993

Method for non-destructive estimation of waveguide directional coupler dimensions

A method for estimating the size and location of couplings within a waveguide directional coupler is provided. The method is applied to a waveguide directional coupler having a main transmission waveguide connected to an auxiliary transmission waveguide by a number of bore hold couplings. The bore hold couplings are in the interior of the waveguide directional coupler and, therefore, are not easily measurable. The method generally includes the steps of applying a two-sided tape to a member, inserting and securing the member within the main transmission waveguide, pouring a fine particulate substance such as talc into the auxiliary transmission waveguide such that a portion of the talc enters the bore hole couplings and adheres to the two-sided tape, and withdrawing the member such that the size and location of the bore hole couplings can be determined by measuring the size and location of marks on the two-sided tape caused by the fine particular substance adhering to the two-sided tape.

Perez, Raul M.↗
NASA NTRS1993

Data management in NOAA

The NOAA archives contain 150 terabytes of data in digital form, most of which are the high volume GOES satellite image data. There are 630 data bases containing 2,350 environmental variables. There are 375 million film records and 90 million paper records in addition to the digital data base. The current data accession rate is 10 percent per year and the number of users are increasing at a 10 percent annual rate. NOAA publishes 5,000 publications and distributes over one million copies to almost 41,000 paying customers. Each year, over six million records are key entered from manuscript documents and about 13,000 computer tapes and 40,000 satellite hardcopy images are entered into the archive. Early digital data were stored on punched cards and open reel computer tapes. In the late seventies, an advanced helical scan technology (AMPEX TBM) was implemented. Now, punched cards have disappeared, the TBM system was abandoned, most data stored on open reel tapes have been migrated to 3480 cartridges, many specialized data sets were distributed on CD ROM's, special archives are being copied to 12 inch optical WORM disks, 5 1/4 inch magneto-optical disks were employed for workstation applications, and 8 mm EXABYTE tapes are planned for major data collection programs. The rapid expansion of new data sets, some of which constitute large volumes of data, coupled with the need for vastly improved access mechanisms, portability, and improved longevity are factors which will influence NOAA's future systems approaches for data management.

Callicott, William M.↗
NASA NTRS1993

GE networked mass storage solutions supporting IEEE network mass storage model

The General Electric Government Communications Systems Department (GE/GCSD) has developed a near real time digital data storage and retrieval system that extends the capabilities currently available in today's marketplace. This system called DuraStore uses commercially available rotary tape drive technology with ANSI/IEEE standards for automated magnetic tape based data storage. It uses a nonproprietary approach to satisfy a wide range of data rates and storage capabilities requirements and is compliant with the IEEE Network Storage Model. Rotary tape drives, standard interfaces, application specific hardware/software, networked automated tape libraries, library administrator, write protection, volume/physical media linkages, and maximum resource utilization are addressed.

Herzog, Donald↗
NASA NTRS1993

Nimbus-7 Total Ozone Mapping Spectrometer (TOMS) data products user's guide

Two tape products from the Total Ozone Mapping Spectrometer (TOMS) aboard the Nimbus-7 have been archived at the National Space Science Data Center. The instrument measures backscattered Earth radiance and incoming solar irradiance; their ratio -- the albedo -- is used in ozone retrievals. In-flight measurements are used to monitor changes in the instrument sensitivity. The algorithm to retrieve total column ozone compares the observed ratios of albedos at pairs of wavelengths with pair ratios calculated for different ozone values, solar zenith angles, and optical paths. The initial error in the absolute scale for TOMS total ozone is 3 percent, the one standard-deviation random error is 2 percent, and the drift is +/- 1.5 percent over 14.5 years. The High Density TOMS (HDTOMS) tape contains the measured albedos, the derived total ozone amount, reflectivity, and cloud-height information for each scan position. It also contains an index of SO2 contamination for each position. The Gridded TOMS (GRIDTOMS) tape contains daily total ozone and reflectivity in roughly equal area grids (110 km in latitude by about 100-150 km in longitude). Detailed descriptions of the tape structure and record formats are provided.

Mcpeters, Richard D.↗
NASA NTRS1993

Response of automated tow placed laminates to stress concentrations

In this study, the response of laminates with stress concentrations is explored. Automated Tow Placed (ATP, also known as Fiber Placement) laminates are compared to conventional tape layup manufacturing. Previous tensile fracture tests on fiber placed laminates show an improvement in tensile fracture of large notches over 20 percent compared to tape layup laminates. A hierarchial modeling scheme is presented. In this scheme, a global model is developed for laminates with notches. A local model is developed to study the influence of inhomogeneities at the notch tip, which are a consequence of the fiber placement manufacturing technique. In addition, a stacked membrane model was developed to study delaminations and splitting on a ply-by-ply basis. The results indicate that some benefit with respect to tensile fracture (up to 11 percent) can be gained from inhomogeneity alone, but that the most improvement may be obtained with splitting and delaminations which are more severe in the case of fiber placement compared to tape layup. Improvements up to 36 percent were found from the model for fiber placed laminates with damage at the notch tip compared to conventional tape layup.

Cairns, Douglas S.↗
NASA NTRS1996

Analysis and Tests of Reinforced Carbon-Epoxy/Foam-Core Sandwich Panels with Cutouts

The results of a study of a low-cost structurally efficient minimum-gage shear-panel design that can be used in light helicopters are presented. The shear-panel design is based on an integrally stiffened syntactic-foam stabilized-skin with an all-bias-ply tape construction for stabilized-skin concept with an all-bias-ply tape construction for the skins. This sandwich concept is an economical way to increase the panel bending stiffness weight penalty. The panels considered in the study were designed to be buckling resistant up to 100 lbs/in. of shear load and to have an ultimate strength of 300 lbs/in. The panel concept uses unidirectional carbon-epoxy tape on a syntactic adhesive as a stiffener that is co-cured with the skin and is an effective concept for improving panel buckling strength. The panel concept also uses pultruded carbon-epoxy rods embedded in a syntactic adhesive and over-wrapped with a bias-ply carbon-epoxy tape to form a reinforcing beam which is an effective method for redistributing load around rectangular cutout. The buckling strength of the reinforced panels is 83 to 90 percent of the predicted buckling strength based on a linear buckling analysis. The maximum experimental deflection exceeds the maximum deflection predicted by a nonlinear analysis by approximately one panel thickness. The failure strength of the reinforced panels was two and a half to seven times of the buckling strength. This efficient shear-panel design concept exceeds the required ultimate strength requirement of 300 lbs/in by more than 100 percent.

Baker, Donald J.↗
NASA NTRS1996

The Challenges Facing Science Data Archiving on Current Mass Storage Systems

This paper discusses the desired characteristics of a tape-based petabyte science data archive and retrieval system required to store and distribute several terabytes (TB) of data per day over an extended period of time, probably more than 115 years, in support of programs such as the Earth Observing System Data and Information System (EOSDIS). These characteristics take into consideration not only cost effective and affordable storage capacity, but also rapid access to selected files, and reading rates that are needed to satisfy thousands of retrieval transactions per day. It seems that where rapid random access to files is not crucial, the tape medium, magnetic or optical, continues to offer cost effective data storage and retrieval solutions, and is likely to do so for many years to come. However, in environments like EOS these tape based archive solutions provide less than full user satisfaction. Therefore, the objective of this paper is to describe the performance and operational enhancements that need to be made to the current tape based archival systems in order to achieve greater acceptance by the EOS and similar user communities.

Peavey, Bernard↗
NASA NTRS1997

Validation of an Accurate Three-Dimensional Helical Slow-Wave Circuit Model

The helical slow-wave circuit embodies a helical coil of rectangular tape supported in a metal barrel by dielectric support rods. Although the helix slow-wave circuit remains the mainstay of the traveling-wave tube (TWT) industry because of its exceptionally wide bandwidth, a full helical circuit, without significant dimensional approximations, has not been successfully modeled until now. Numerous attempts have been made to analyze the helical slow-wave circuit so that the performance could be accurately predicted without actually building it, but because of its complex geometry, many geometrical approximations became necessary rendering the previous models inaccurate. In the course of this research it has been demonstrated that using the simulation code, MAFIA, the helical structure can be modeled with actual tape width and thickness, dielectric support rod geometry and materials. To demonstrate the accuracy of the MAFIA model, the cold-test parameters including dispersion, on-axis interaction impedance and attenuation have been calculated for several helical TWT slow-wave circuits with a variety of support rod geometries including rectangular and T-shaped rods, as well as various support rod materials including isotropic, anisotropic and partially metal coated dielectrics. Compared with experimentally measured results, the agreement is excellent. With the accuracy of the MAFIA helical model validated, the code was used to investigate several conventional geometric approximations in an attempt to obtain the most computationally efficient model. Several simplifications were made to a standard model including replacing the helical tape with filaments, and replacing rectangular support rods with shapes conforming to the cylindrical coordinate system with effective permittivity. The approximate models are compared with the standard model in terms of cold-test characteristics and computational time. The model was also used to determine the sensitivity of various circuit parameters including typical manufacturing dimensional tolerances and support rod permittivity. By varying the circuit parameters of an accurate model using MAFIA, these sensitivities can be computed for manufacturing concerns, and design optimization previous to fabrication, thus eliminating the need for costly experimental iterations. Several variations were made to a standard helical circuit using MAFIA to investigate the effect that variations on helical tape and support rod width, metallized loading height and support rod permittivity, have on TWT cold-test characteristics.

Kory, Carol L.↗
NASA NTRS1997

Restoration and Archiving of Data from the Plasma Composition Experiment on the International Sun-Earth Explorer One (ISEE 1)

The objective of this project has been to complete the archiving of energetic (10 eV/epsilon - 18 keV/epsilon) ion composition data from the Lockheed Plasma Composition Experiment on the International Sun-Earth Explorer One (ISEE 1) satellite, using a particular data format that had previously been approved by NASA and the NSSDC. That same format, a combination of ion velocity moments and differential flux spectra, had been used in 1991 to archive, at the NSSDC, the first 28 months (the "Prime" period of ISEE investigations) of data from the Lockheed instrument under NASA Contract NAS5-33047. With the completion of this project, the almost 4 1/2-year time span of these unique data is now covered by a very compact set, approximately 1 gigabyte in total, of electronic files with physical quantities, all in ASCII. The files are organized by data type and time of data acquisition, in Universal Time, and named according to year and day of year. Each calendar day has five separate files (five types of data), the lengths of which vary from day to day, depending on the instrument mode of operation. The data format and file structure are described in detail in appendices 1 and 2. The physical medium consists of high-density (6250 cpi) 9-track magnetic tapes, complemented by a set of hardcopy line plots of certain plasma parameters. In this case there are five tapes, to be added to the six previous ones from 1991, and 25 booklets of plots, one per month, to be added to the previous 28. The tapes, including an extra standard-density (1600 cpi) tape with electronic versions of the Data User's Guide and self-guiding VAX/VMS command files, and the hardcopy plots are being boxed for shipment to the NSSDC.

Lennartsson, O. W.↗
NASA NTRS1997

Earth-Based Ring Occultation to the PDS Rings Node

The major task of this work has been to collect, document, and translate a wide variety of occultation data sets to a common format. This work has been completed. Table I lists the 1977-1987 Uranus occultation data sets that have been retrieved and which are ready for conversion to the PDS occultation standard format, once it has been standardized. The primary documentation and original data tapes for these occultations are part of the MIT data archive, and will be submitted to the PDS from MIT. I have been in contact with Jim Elliot and Steve McDonald, who are carrying out this work, and they have informed me that some of the original data tapes have bad blocks in them. As called upon, I will continue to provide the MIT group with whatever information they require in order that the most complete versions of the data sets be provided to the PDS. 2. All data sets from MIT NOVA disk platters were transcribed to Exabyte tapes, and software was written to enable the NOVA binary data formats to be converted to IEEE standard format. The number of these files which will be contributed to the PDS will depend on the success of the MIT group in reading the original data tapes for the events recorded on these disk platters. As needed, I will supply the MIT group with translated versions of these salvaged files for submission to the PDS. 3. The imaging observations from McDonald and Lick Observatories have been calibrated in both radius and optical depth, and are available in simple binary format. 4. Final submission of the Uranus ring data sets to the PDS is awaiting final agreement by the Rings Node Advisory Council on the PDS FITS format to be adopted for occultation data set.

French, Richard G.↗
NASA NTRS1994

Reducing Backups by Utilizing DMF

Although a filesystem may be migratable, for a period of time the data blocks are on disk only. When performing system dumps, these data blocks are backed up to tape. If the data blocks are offline or dual resident, then only the inode is backed up. If all online files are made dual resident prior to performing system dumps, the dump time and the amount of resources required can be significantly reduced. The High Speed Processors group at the Numerical Aerodynamics Simulation (NAS) Facility at NASA Ames Research Center developed a tool to make all online files dual resident. The result is that a file whose data blocks are on DMF tape and still assigned to the original inode. Our 150GB filesystem used to take 8 to 12 hours to backup and used 50 to 60 tapes. Now the backup is typically under 10 tapes and completes in under 2 hours. This paper discusses this new tool and advantages gained by using it.

Cardo, Nicholas P.↗
NASA NTRS1995

Integrating D3 Technology into an Existing DMF Configuration

The Numerical Aerodynamics Simulation (NAS) Facility's CRAY C916/1024 has 240+ GB of SuperHome storage with 2 TB of migrated storage. NAS is a beta test site for the Storage Technology Corporation (STK) Redwood (SD-3) device and Cray's DMF 2.3. This discussion will include a list of resolved problems and various metrics relative to transfer, search, rewind, unload, and mount timings. Also covered will be how DMF 2.3 with the advance tape MSP will integrate the Redwood tape drives along with the existing STK 4490 tape drives to potentially reduce the number of tapes used by 85%.

Powers, Alan K.↗