SEARCH · Engineering Papers

Results for “Subsurface”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44

All sources NASA NTRS DOE OSTI

NASA NTRS1974

The surface geometry of inherited joint and fracture trace patterns resulting from active and passive deformation

Hypothetical models are considered for detecting subsurface structure from the fracture or joint pattern, which may be influenced by the structure and propagated to the surface. Various patterns of an initially orthogonal fracture grid are modeled according to active and passive deformation mechanisms. In the active periclinal structure with a vertical axis, fracture frequency increased both over the dome and basin, and remained constant with decreasing depth to the structure. For passive periclinal features such as a reef or sand body, fracture frequency is determined by the arc of curvature and showed a reduction over the reefmound and increased over the basin.

Podwysocki, M. H.↗

NASA NTRS1975

Application of monochromatic ocean wave forecasts to prediction of wave-induced currents

The use of monochromatic wind-wave forecasts in prediction of wind-wave-induced currents was assessed. Currents were computed for selected combinations of wind conditions by using a spectrum approach which was developed by using the Bretschneider wave spectrum for partially developed wind seas. These currents were compared with currents computed by using the significant and average monochromatic wave parameters related to the Bretschneider spectrum. Results indicate that forecasts of significant wave parameters can be used to predict surface wind-wave-induced currents. Conversion of these parameters to average wave parameters can furnish reasonable estimates of subsurface current values.

Poole, L. R.↗

NASA NTRS1975

Use of LIDAR systems in measuring certain physical oceanographic parameters

Remote sensing techniques, such as LIDAR, are the only observation methods which are capable of fast scanning over a vast area to produce synoptic views which are necessary for time and space study of the ocean. However, due to the very nature of the way data are collected, all the information thus obtained is confined, to or in the immediate neighborhood of the surface. Nevertheless, all the physical processes in the ocean are controlled mainly by both surface and subsurface parameters; they act and interact among themselves and produce the phenomena we actually observe in time and space. Remote sensing techniques are very effective for those phenomena controlled by surface parameters which account for most of the crucial problems in physical oceanography.

Chen, D. T.↗

NASA NTRS1975

Recent advances in the applications of pulsed lasers in the hydrosphere

Laboratory and field measurements have been performed on the transmission/scattering characteristics of a pulsed neon laser as a function of water turbidity. These results have been used to establish the criteria for an airborne laser bathymetry system. Extensive measurements have been made of laser induced fluorescence using a pulsed tunable dye laser. Feasibility has been demonstrated for remote detection and possible identification of various types of algae and oils. Similar measurements made on a wide variety of organic dyes have shown this technique to have applications in remote measurements of subsurface currents, temperature and salinity.

Hickman, G. D.↗

NASA NTRS1974

Skylab altimeter applications and scientific results

Analysis of the Skylab S-193 Altimeter Experiment data has produced many significant results. The purpose of this paper is to present some of these results which illustrate the programmatic altimeter technology gained and show the scientific potential of altimetry for various applications, including correlation with existing topographic features, geoids and physical models. It will be shown that there exists a very strong correlation between subsurface topography in the broad ocean area and the shape of the ocean surface as determined from the altimeter. Modeled scattering waveforms will be correlated with Skylab Altimeter waveforms. The agreement of a variety of existing geoid models with the altimeter data will be shown. In addition the calibration, accuracy and stability of the S-193 altimeter instrumentation will be discussed.

Mcgoogan, J. T.↗

NASA NTRS1974

Water depth penetration film test

As part of the National Aeronautics and Space Administration Earth Resources Program, a comparative and controlled evaluation of nine film-filter combinations was completed to establish the relative effectiveness in recording water subsurface detail if exposed from an aerial platform over a typical water body. The films tested, with one exception, were those which prior was suggested had potential. These included an experimental 2-layer positive color film, a 2-layer (minus blue layer) film, a normal 3-layer color film, a panchromatic black-and-white film, and a black-and-white infrared film. Selective filtration was used with all films.

Lockwood, H. E.↗

NASA NTRS1974

Mapping soil features from multispectral scanner data

In being able to identify quickly gross variations in soil features, the computer-aided classification of multispectral scanner data can be an effective aid to soil surveying. Variations in soil tone are easily seen as well as variations in features related to soil tone, e.g., drainage patterns and organic matter content. Changes in surface texture also affect the reflectance properties of soils. Inasmuch as conventional soil classes are based on both surface and subsurface soil characteristics, the technique described here can be expected only to augment and not replace traditional soil mapping.

Kristof, S. J.↗

NASA NTRS1974

Signatures of various earth surfaces measured by the Nimbus-5 microwave spectrometer

The Nimbus-5 Meteorological Satellite is equipped with a 5-channel microwave spectrometer. The two lowest channels (22.2 and 31.4 GHz) provide information on surface brightness temperature. Distinctive microwave signatures can be observed for snow, land ice, and sea ice in both polar regions. Some information on subsurface temperatures can be gained for desert areas.

Kunzi, K. F.↗

NASA NTRS1974

Use of visible, near-infrared, and thermal infrared remote sensing to study soil moisture

Two methods are used to estimate soil moisture remotely using the 0.4- to 14.0-micron wavelength region: (1) measurement of spectral reflectance, and (2) measurement of soil temperature. The reflectance method is based on observations which show that directional reflectance decreases as soil moisture increases for a given material. The soil temperature method is based on observations which show that differences between daytime and nighttime soil temperatures decrease as moisture content increases for a given material. In some circumstances, separate reflectance or temperature measurements yield ambiguous data, in which case these two methods may be combined to obtain a valid soil moisture determination. In this combined approach, reflectance is used to estimate low moisture levels; and thermal inertia (or thermal diffusivity) is used to estimate higher levels. The reflectance method appears promising for surface estimates of soil moisture, whereas the temperature method appears promising for estimates of near-subsurface (0 to 10 cm).

Blanchard, M. B.↗

NASA NTRS1975

Origin of Martian channels - Clathrates and water

Criticism is directed at the suggestion that Martian channels may have been eroded by liquid water produced by the depressurization of CO2 hydrate. The release of pre-existing subsurface liquid water, such as that trapped under a permafrost layer, by meteorite impact or tectonic activity could produce sufficient flow and would not require heat transfer. The presence of water in a CO2 hydrate is shown to be detrimental to its release from an underground reservoir.

Peale, S. J.↗

NASA NTRS1975

Lunar magnetic anomalies and the Cayley Formation

Correlation between the Cayley Formation and the magnetic anomaly at the Apollo 16 site in the northern plains of the crater Van de Graaf is discounted. The planar fill in the north end of Van de Graaf is described as dissimilar from Cayley-like plains, and orbital magnetic data collected by Apollo sub-satellites is shown not to substantiate the correlation of Cayley-like plains with any particular magnetic signature. The magnetic anomaly near Van de Graaf is explained as most likely being due to a subsurface source.

Stuart-Alexander, D. E.↗

NASA NTRS1974

Microwave remote sensing of ice and snow

A composite theoretical model is proposed to account for effects on emissivity caused by layering, absorption, anisotropy, surface roughness, inhomogeneities and subsurface scattering. The emissivity as a function of frequency is calculated for a two layer model simulating ice or snow covered water or land. The theoretical results are compared with experimental data.

Kong, J. A.↗

NASA NTRS1975

Fatigue failure of hydrogen embrittled high strength steels

Results of an experimental investigation are presented concerning the fracture behavior of cathodically charged, quenched and tempered martensitic steels under cyclic load conditions. Introduction of H2 by cathodic charging reduced fatigue life by as much as 60%. It is proposed that subsurface transverse fatigue cracks nucleate simultaneously at multiple sites, such as at microcracks, voids, or inclusions. Fatigue crack growth then occurs on planes perpendicular to the major applied stress axis in the presence of the critical combination of applied external stress and hydrogen.

Kim, Y. G.↗

NASA NTRS1974

Problems in the interpretation of lunar mare stratigraphy and relative ages indicated by ejecta from small impact craters

The numbers of large ejecta blocks in excess of several meters in diameter ('blockiness') around the rims of small craters in southeastern Mare Serenitatis exceed those around similar craters in southern Mare Imbrium (and some other regions) at all but the final stages of crater degradation. Terrestrial explosion crater analogs, studies of impact processes, and a layered mare model suggest that the nature of the layering in the subsurface, including lavas, ejecta and buried regolith horizons, could account for the variable blockiness of crater ejecta and, possibly, for some variation in crater size-frequency distributions. Such effects would limit the reliability and utility of counting postmare craters for the purpose of estimating the relative ages of mare surfaces. Similarly, comparisons of the effects of progressive degradation on small impact craters to determine relative or absolute ages of individual craters may be limited by the influence of stratigraphy on ejecta fragment size distributions, which would in turn affect micrometeorite erosion rates and regolith production models.

Young, R. A.↗

NASA NTRS1974

Orange material in the Sulpicius Gallus formation at the southwestern edge of Mare Serenitatis

Orange and red materials were observed and photographed in the dark mantle of the Sulpicius Gallus Formation on the southwestern rim of the Serenitatis basin. These materials occur only within the dark mantle that overlies old rilled mare and highland units and are absent on the younger mare unit in this area. Orange and red materials occur predominantly as halos, patches, or rays around fresh impact craters ranging in diameter from less than 50 to 250 m and in layers exposed at the base of the dark mantle deposit in the steep walls of a depression and a graben. Red material is present in the highland subsurface, possibly as dikes. We conclude that orange material, locally underlain by red material, occurs in the dark mantle to a depth of about 50 m as locally stratified but discontinuous pyroclastic deposits and that it may have been produced by multiple 'fire foundation' eruptions during the later stages of accumulation of the older mare basalt units.

Lucchitta, B. K.↗

NASA NTRS1976

Ablative-filled honeycomb composites

Two techniques reduce fabrication cost and complexity: net surface molding permits ablative insulators with sculptured tapers to be produced over substrate having unpredictable irregularities; subsurface molding results in ablative surface below honeycomb.

Linebarier, H. L.↗

NASA NTRS1975

Satellite microwave observations of the Utah Great Salt Lake Desert

Microwave data acquired over the Great Salt Lake Desert by sensors aboard Skylab and Nimbus 5 indicate that microwave emission and backscatter were strongly influenced by contributions from subsurface layers of sediment saturated with brine. This phenomenon was observed by Skylab's S-194 radiometer operating at 1.4 GHz, S-193 RADSCAT (Radiometer-Scatterometer) operating at 13.9 GHz and the Nimbus 5 ESMR (Electrically Scanning Microwave Radiometer) operating at 19.35 GHz. The availability of ESMR data over an 18 month period allowed an investigation of temporal variations. Aircraft 1.4 GHz radiometer data acquired two days after one of the Skylab passes confirm the satellites observations. Data from the ESMR revealed similar responses over the Bolivian deserts, which have geologic features similar to those of the Utah desert.

Ulaby, F. T.↗

NASA NTRS1974

Expected Seasat-A scientific results

The higher accuracy and extended coverage of the SEASAT-A altimeter allows for the determinations of a highly refined geoid, of open ocean currents and circulations, of ocean subsurface topography, and of earth surface topography. The radar altimeter on SEASAT-A is also considered as a tracking station in orbit for range and range rate tracking work.

Hoge, F. E.↗