SEARCH · Engineering Papers

Results for “Source Terms”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44

All sources NASA NTRS DOE OSTI

NASA NTRS1972

The interpretation of total line intensities from optically thin gases. I, II, III.

Description of a general method for inferring, from the line emission of an optically thin medium, the physical state of a gas along the column in a line of sight. The method is devised for applications to astronomy, especially for studies of the solar corona, the chromosphere-corona transition region, planetary nebulae, and other optically thin sources. A unique specification is found in terms of a bivariate distribution function describing the partitioning of matter in a gas over density and temperature. It is shown that, given sufficient observational data, it is in principle possible to determine both this bivariate distribution function and the chemical composition. The formulation for a situation encountered in the solar corona illustrates the application of the method.

Jefferies, J. T.↗

NASA NTRS1973

Investigation of responsivity and noise in a direct-coupled photodetector-preamplifier for facsimile cameras

The direct-coupled (DC) mode of detector operation is evaluated for use in a facsimile camera. Photodiode-preamplifier sensitivity is described in terms of photodiode responsivity and possible noise sources resulting from the photodiode and preamplifier. Responsivity and noise limitations are experimentally verified and used to predict photodiode-preamplifier sensitivity under a wide range of operating conditions. Results demonstrate that the DC mode offers advantages in sensitivity and reduced mechanical complexity for facsimile cameras over the more common technique of chopping the radiation and ac amplifying the resultant signal.

Kelly, W. L., IV↗

NASA NTRS1973

Thermal-bremsstrahlung interpretation of cluster X-ray sources.

Analysis of the X-ray data for the extended sources in Coma, Perseus, and Virgo in terms of an isothermal gas-sphere model emitting thermal-bremsstrahlung radiation. It is found that the gas distribution is somewhat less centrally condensed than the galaxies, and that the gas mass is generally a small fraction of the binding mass of each cluster. In the case of the Coma cluster, approximately one-eighth of the binding mass (with an uncertainty of about 50%) may be in the form of hot gas at 100,000,000 K if H sub zero = 50 km/sec/Mpc.

Lea, S. M.↗

NASA NTRS1973

Spectrum of atmospheric gamma rays to 10 MeV at lambda = 40 deg

Results of measurements of the differential counting rate spectra due to atmospheric gamma rays as a function of altitude to 3.6 g/sq cm over Texas. Two gain settings and a 128-channel pulse height analyzer were used to cover the range from 0.2 to 10 MeV. The detector was a 7.6 x 7.6 cm NaI crystal, which was surrounded on five sides by a 2-cm-thick plastic anticoincidence shield for charged particle rejection. The system had a nearly isotropic response to photons above 0.2 MeV. The spectrum at ceiling appeared as a steep continuum with a power-law index of about 1.4. The only obvious feature was the 0.51-MeV positron annihilation line. The spectral shape was independent for depths less than 20 g/sq cm, the absolute intensity varying in proportion to the intensity of the cosmic ray secondary charged particles. Also, at depths less than 30 g/sq cm the observed flux variation with altitude can be described in terms of an empirical depth-dependent source function.

Peterson, L. E.↗

NASA NTRS1974

Meter and decameter wavelength positions of solar bursts of July 31-August 7, 1972

The positional analysis of solar bursts at meter and decameter wavelengths observed during the period from July 31 to Aug. 7, 1972 is presented. Most of the activity during this period was associated with the active regions McMath 11976 and 11970. Except near the central meridian passage of region 11976, two regions of continuum emission were observed - one a relatively smooth continuum and the other a continuum superimposed with many type III emissions and other fine structure. It seems possible to interpret these continua in terms of plasma waves originating from two sources located at different heights or with different electron density gradients. The angular size of type III sources seems to increase with decreasing frequency. This implies that the open field lines along which the type III electrons travel have larger angular extent at greater heights.

Kundu, M. R.↗

NASA NTRS1975

Influence of grazing flow on duct wall normal impedances

A theory is developed for evaluating the normal impedance of an orifice connecting a cylindrical cavity to a flow duct. The impedance of a piston velocity source at the orifice is calculated in terms of the cavity modes which are modified by the presence of a vortex flow. The strength of the vortex is related to the mean flow in the duct. Results are presented showing the variation of the normal impedance spectrum with the cavity vortex. The trends of these variations are confirmed by comparison with measurements.

Mungur, P.↗

NASA NTRS1976

Hydrogen use projections and supply options

Two projections of future hydrogen demand, based on the Ford technical fix and the Westinghouse nuclear electric economy energy supply and demand scenarios, are analyzed. It is suggested that hydrogen use will increase during the remainder of this century by at least a factor of five, and perhaps by a factor of twenty. Primary energy sources for producing hydrogen are discussed in terms of the transition from low to high demand for hydrogen.

Manvi, R.↗

NASA NTRS1979

The ion drive program - Comet rendezvous issues for SEPS developers

Preliminary steps have been taken in a joint high-priority project between NASA and the European Space Agency, whereby a Solar Electric Propulsion System (SEPS), using ion drive of a 25-30 kilowatt power level, will be utilized for the first time, as part of the Space Transportation System, in powering a probe to be deployed toward Halley's comet in 1985 and a separate spacecraft which will rendezvous with the Temple 2 comet in 1988 and study it for one year. Unlike ballistically-launched vehicles, an unprecedented long-term interaction between the SEPS, the primary source of power and attitude control, and the spacecraft, responsible for data handling (at a rate of 10-120 kilobits per second), and command and telecommunications to earth (requiring capabilities at both X- and S-band frequencies, for dual-frequency navigational tracking), is required, as mission phases alternate between powered flight and science data-taking. Different design sensitivities are presented graphically.

Atkins, K. L.↗

NASA NTRS1981

The pyroelectric properties of TGS for application in infrared detection

The pyroelectric property of triglycine sulfate and its application in the detection of infrared radiation are described. The detectivities of pyroelectric detectors and other types of infrared detectors are compared. The thermal response of a pyroelectric detector element and the resulting electrical response are derived in terms of the material parameters. The noise sources which limit the sensitivity of pyroelectric detectors are described, and the noise equivalent power for each noise source is given as a function of frequency and detector area.

Kroes, R. L.↗

NASA NTRS1983

Redundant asynchronous microprocessor system for fault tolerant flight control and navigation

Unlike their synchronized counterparts, redundant channels in an asynchronous flight system can, under no-fault conditions, exhibit cross-channel data disparities. Sources of these errors are examined in terms of the general, individual functions of the flight control and navigation application in the asynchronous digital environment. The effects of asynchronism on trajectory programmers, dynamic control algorithms and data reconstruction processes are examined in terms of data skews, data latencies, and clock rate uncertainties. An example is presented in which time corrections are applied to reduce the data disparities. Practical limitations of the approach of the example are discussed.

Dunn, W. R.↗

NASA NTRS1985

Electron acceleration in solar flares and the transition from nonthermal to thermal hard X-ray phases

Observations are reviewed which indicate that hard X-rays during the impulsive phase of a flare typically start with a primarily nonthermal phase which undergoes a transition to a primarily thermal phase as the flare progresses. Recent theoretical work on the modified two-stream instability as an efficient electron accelerator and modeling of thermal hard X-ray sources is considered. A scenario which is termed the dissipative thermal model is proposed to explain the observations. Fast tearing modes occurring in a loop give rise to cross-field ion motion. This in turn excites the modified two-stream instability which converts about 50 percent of the ion energy into accelerated electrons along the loop as long as the plasma beta is less than 0.3. These electrons impact the chromosphere and boil off a part of it which rises up the loop. This density increase coupled with the temperature increase due to tearing causes the beta to increase beyond 0.3 and efficient electron acceleration ceases. This leads to the primarily thermal phase.

Smith, D. F.↗

NASA NTRS1985

Experimental radar Doppler wind profile measurements at Kennedy Space Center

A wind profile radar demonstration project was sponsored by the Space Transportation System (STS) Program Office to study the feasibility of incorporating continuous, high time resolution radar wind data into STS operations. This project required wind profile radars to be deployed in the vicinity of the Shuttle launch site into an environment quite unlike typical VHF profiler sites. Two 50 MHz radars were operated at the Kennedy Space Center in environments that were noisy in terms of RFI, large stationary ground clutter sources, non-stationary clutter sources, and heavy local aircraft traffic. Processing compensation for these operational constraints magnified design limitations of the research-level radars used in the demonstration. This report addresses the importance of system design for unique or particular applications with reference to finite radiation patterns, zero-Doppler processing, radar frequency, and beam pointing.

Jost, R. J.↗

NASA NTRS1990

Acoustic measurements of gas density

Sound transmission through gases in an enclosure is considered. Analytical results are given in terms of geometrical parameters, wave numbers, and source type for simple model problems, and are compared with data obtained by Haran (1983). It is concluded that density measurements can be made in a gas contained in an enclosure by measuring the sound pressure level at a receiver located near a dipole source driven at a constant velocity amplitude at low frequencies.

Shakkottai, P.↗

NASA NTRS1992

Ultraviolet and visible variability of the coma of Comet Levy (1990c)

A visible lightcurve of Comet Levy obtained with the IUE Fine Error Sensor has revealed short-term coma variability. A production-rate source function is derivable from these data which implies a nucleus exhibiting hemispherically asymmetric activity. The ratio of gas-to-dust-production rates is also noted to exhibit asymmetry. The low dust-outflow velocity derived from observations, at about 200 m/sec, indicates a distribution that is rich in large, 3-10 micron particles.

Feldman, P. D.↗

NASA NTRS1992

A new hue capturing technique for the quantitative interpretation of liquid crystal images used in convective heat transfer studies

A new image processing based color capturing technique for the quantitative interpretation of liquid crystal images used in convective heat transfer studies is presented. This method is highly applicable to the surfaces exposed to convective heating in gas turbine engines. It is shown that, in the single-crystal mode, many of the colors appearing on the heat transfer surface correlate strongly with the local temperature. A very accurate quantitative approach using an experimentally determined linear hue vs temperature relation is found to be possible. The new hue-capturing process is discussed in terms of the strength of the light source illuminating the heat transfer surface, the effect of the orientation of the illuminating source with respect to the surface, crystal layer uniformity, and the repeatability of the process. The present method is more advantageous than the multiple filter method because of its ability to generate many isotherms simultaneously from a single-crystal image at a high resolution in a very time-efficient manner.

Camci, C.↗

NASA NTRS1956

Axially symmetric shapes with minimum wave drag

The external wave drag of bodies of revolution moving at supersonic speeds can be expressed either in terms of the geometry of the body, or in terms of the body-simulating axial source distribution. For purposes of deriving optimum bodies under various given conditions, it is found that the second of the methods mentioned is the more tractable. By use of a quasi-cylindrical theory, that is, the boundary conditions are applied on the surface of a cylinder rather than on the body itself, the variational problems of the optimum bodies having prescribed volume or caliber are solved. The streamline variations of cross-sectional area and drags of the bodies are exhibited, and some numerical results are given.

Heaslet, Max A↗

NASA NTRS1994

Comparison of theories for gravity wave induced fluctuations in airglow emissions

A comparison is undertaken of theories for the gravity wave induced fluctuations in the intensity of airglow emissions and the associated temperature of the source region. The comparison is made in terms of Krassovsky's ratio eta(sub E) for a vertically extended emission region (eta(sub E) is the ratio of the vertically integrated normalized intensity perturbation to the vertically integrated intensity-weighted temperature perturbation). It is shown that the formulas for eta(sub E) in the works by Tarasick and Hines (1990) and Schubert et al. (1991) are in agreement for the case of an inviscid atmosphere. The calculation of eta(sub E) using the theory of Tarasick and Hines (1990) requires determination of their function chi; we show that chi is simply related to the 'single-level' Krassovsky's ratio eta of Schubert et al. (1991). The general relationship between chi and eta is applied to a simple chemical-dynamical model of the O2 atmospheric airglow and the altitude dependence of these quantities is evaluated for nonsteady state chemistry. Though the Tarasick and Hines (1990) formula for eta(sub E) does not explicitly depend on the scale heights of the minor constituents involved in airglow chemistry, eta(sub E) implicitly depends upon these scale heights through its dependences on chemical production and loss contained in chi. We demonstrate this dependence of eta(sub E) for the OH nightglow on atomic oxygen scale height by direct numerical evaluation of eta(sub E) in this case the dependence originates in the chemical production of perturbed ozone.

Walterscheid, R. L.↗

NASA NTRS1995

Analysis of a 170-GHz frequency doubler with an array of planar diodes

Analysis of a planar diode multiplier from 85-170 GHz is described. The doubler uses a waveguide mount with two series pairs of diodes in a balanced structure. Because of the difficulties in conventional scale model measurements, numerical electromagnetic simulation based on the finite element method was chosen for the analysis, using a commercial program. To optimize the diode design, the de-embedded diode terminal impedance was studied, as well as the power balance between the diodes. The analysis showed that the matching of the diode impedance to that of the waveguide is quite sensitive to the diode substrate thickness. Thicknesses from 25-100 micron in GaAs were studied as well as 100-micron-thick quartz. The accuracy of the theoretical analysis was verified by careful measurements using a slotted line to determine the diode terminal impedance under large signal pump, for frequencies between 80 and 90 GHz. Good agreement between the measured and simulated diode terminal impedance was observed, although full agreement requires the addition of an empirical loss term. Several options are considered for the source of this loss.

DIODE MULTIPLIER↗