Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Soil surface temperature”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44

The abundances of H-3 and C-14 in the solar wind

Tritium is measured as a function of depth in a Surveyor 3 sample. The upper limit for solar-wind-implanted tritium gives a H-3/H-1 limit for the solar wind of 1 part in one hundred billion. The temperature release patterns of C-14 from lunar soils are measured. The C-14 release patterns from surface soils differ from a trench-bottom soil and give evidence for the presence of C-14 in the solar wind with a C-14/H-1 ratio of approximately 4 parts in one hundred billion. The implications of these radionuclide abundances in the solar wind are discussed.

Fireman, E. L.↗

Use of ground-based remotely sensed data for surface energy balance calculations during Monsoon '90

Surface energy balance was evaluated at a semiarid watershed using direct and indirect measurements of the turbulent fluxes, a remote technique based on measurements of surface reflectance and temperature, and conventional meteorological information. Comparison of remote estimates of net radiant flux and soil heat flux densities with measured values showed errors on the order of +/-40 W/sq m. To account for the effects of sparse vegetation, semi-empirical adjustments to aerodynamic resistance were required for evaluation of sensible heat flux density (H). However, a significant scatter in estimated versus measured latent heat flux density (LE) was still observed, +/-75 W/sq m over a range from 100-400 W/sq m. The errors of H and LE estimates were reduced to +/-50 W/sq m when observations were restricted to clear sky conditions.

Moran, M. S.↗

Measuring surface fluxes in CAPE

Two stations (site 1612 and site 2008) were operated by the University of Georgia group from 6 July 1991 to 18 August 1991. The following data were collected continuously: surface energy fluxes (i.e., net radiation, soil heat fluxes, sensible heat flux and latent heat flux), air temperature, vapor pressure, soil temperature (at 1 cm depth), and precipitation. Canopy reflectance and light interception data were taken three times at each site between 6 July and 18 August. Soil moisture content was measured twice at each site.

Kanemasu, E. T.↗

Understanding the Impacts of Land Surface and PBL Observations on the Terrestrial and Atmospheric Legs of Land-Atmosphere Coupling

Accurately representing land-atmosphere (L-A) interactions and coupling in NWP systems remains a challenge. New observations, incorporated into models via assimilation or calibration, hold the promise of improved forecast skill, but erroneous model coupling can hinder the benefits of such activities. To better understand model representation of coupled interactions and feedbacks, this study demonstrates a novel framework for coupled calibration of the Single Column Model (SCM) capability of the NASA Unified Weather Research and Forecasting (NU-WRF) system coupled to NASA’s Land Information System (LIS). The local land-atmosphere coupling (LoCo) process chain paradigm is used to assess the processes and connections revealed by calibration experiments. Two summer case studies in the U. S. Southern Great Plains are simulated in which LSM parameters are calibrated to diurnal observations of LoCo process chain components including 2-meter temperature, 2-meter humidity, surface fluxes (Bowen ratio), and PBL height. Results show a wide range of soil moisture and hydraulic parameter solutions depending on which L-A variable (i.e. observation) is used for calibration, highlighting that improvement in either SHP or ISM when not in tandem with the other can provide undesirable results. Overall, this work demonstrates that a process chain calibration approach can be used to assess L-A connections, feedbacks, strengths, and deficiencies in coupled models, as well as quantify the potential impact of new sources of observations of land-PBL variables on coupled prediction.

Patricia Lawston-Parker↗

Low-Temperature, Aqueous Alteration of Soil in Wright Valley, Antarctica, Compared with Aqueous Alteration on Mars

The Dry Valleys of Antarctica are possibly one of the best analogs on Earth of the environment at the surface of Mars. Many types of research have been focused on the Dry Valleys, partly because of the potential application to Mars, and also because of the importance of the Dry Valleys in understanding the characteristics and development of terrestrial polar deserts. In 1983, we published a detailed study of weathering products and soil chemistry in a soil pit at Prospect Mesa, Wright Valley, as a possible analog to Mars. Much more is now known about Mars, so we are re-examining that earlier work and comparing it with newer martian data. The Mars information most pertinent to this work includes (A) the strong evidence for recent aqueous activity on Mars, along with more recent evidence for present-day, near-surface water ice on Mars; and (B) the identification of meteorites from Mars and the subsequent, definitive proof that low temperature, aqueous weathering has occurred in these meteorites prior to their ejection from Mars.

Wentworth, S. J.↗

Collecting cometary soil samples? Development of the ROSETTA sample acquisition system

In the reference scenario of the ROSETTA CNRS mission, the Sample Acquisition System is mounted on the Comet Lander. Its tasks are to acquire three kinds of cometary samples and to transfer them to the Earth Return Capsule. Operations are to be performed in vacuum and microgravity, on a probably rough and dusty surface, in a largely unknown material, at temperatures in the order of 100 K. The concept and operation of the Sample Acquisition System are presented. The design of the prototype corer and surface sampling tool, and of the equipment for testing them at cryogenic temperatures in ambient conditions and in vacuum in various materials representing cometary soil, are described. Results of recent preliminary tests performed in low temperature thermal vacuum in a cometary analog ice-dust mixture are provided.

Coste, P. A.↗

Plant cover, soil temperature, freeze, water stress, and evapotranspiration conditions

The author has identified the following significant results. Procedures to edit cloud-contaminated pixels from those pixels representing Earth surface features were investigated. Because clouds are more reflective than Earth features and are colder than Earth surface features most of the year at 26 N latitude, either a raw digital count ratio or a ratio of reflectance percentage for the VIS band to the temperature works well. For this procedure, the two bands of data need to be registered to the ground scene.

Wiegand, C. L.↗

Interannual Variability of the Mosaic Land-Surface Model

Recently, NASA Goddard Earth Observing System (GEOS-1) reanalysis data has been used to provide forcing for the Koster and Suarez Mosaic Land-surface Model (LSM). The LSM was integrated off-line at all global land points for the period of 1983 - 1995 by the Off-line Land- surface GEOS Assimilation system (OLGA). Here, we compare the interannual variability of OLGA, GEOS-1 and surface observing stations temperature and moisture. Particular attention is given to the United States because of the extreme seasons of 1988 and 1993. Furthermore, the comparison of OLGA is extended to include the analysis of data on the'tiles' (different surface types) in the Mosaic LSM. Results indicate that the GEOS-1 near-surface temperature and moisture reasonably represents the interannual variability in more normal years. However, OLGA also simulates the extreme drought and floods years well. The analysis of the tile information shows that the "Bare soil" surface type is most sensitive to the climate extremes. Off-line testing has provided valuable information on the performance of the Mosaic LSM prior to its incorporation into the new version of the GEOS Data Assimilation System and the integration of a new long reanalysis.

Bosilovich, Michael G.↗

Thermal Analysis for SRS Saltstone Disposal Unit Facility

Saltstone Disposal Units (SDU) are long term disposal units for low activity grout produced from the solidification of decontaminated non-hazardous salt waste at SRS. The unit is a cylindrical disposal vault of 150 ft. in diameter and 23 ft. in height. The total volume the SDU can hold is 3 million gallons of grout. The hydration process of the grout material produces heat from an exothermic chemical reaction. If the grout reaches temperatures higher than the maximum safety temperature of 95 deg. C, cracks can start forming leading to contamination of the environment. The purpose of this study is to develop the optimal baseline domain boundary conditions and to perform a sensitivity analysis with respect to the baseline modeling conditions. The following assumptions were made for the modeling calculations: - The system geometry is axisymmetric; - The system was at steady state; - Ambient temperature was set to 100 deg. F; - Air was assumed to be an incompressible ideal gas; - Radiation was neglected for a conservative estimation; - Natural convection for the SDU vapor space is assumed to be turbulent because Rayleigh number based on typical operating conditions is higher than 10{sup 8}; - Water tables were not taken into consideration. The following sensitivity analyses were performed to find the optimal domain boundary: - Mesh size sensitivity; - Soil depth sensitivity - Soil depth varied from 30 ft to 250 ft with a soil thickness of 90 ft; - Soil thickness sensitivity - Soil thickness varied from 30 ft to 270 ft with a soil depth of 180 ft; - Soil conductivity sensitivity - Soil thermal conductivity varied from 0.25 W/m-K to 1 W/m-K; - Ambient Temperature Sensitivity - Ambient temperature varied from 70 deg. F to 110 deg. F. For the thermal calculations, the temperature of the bottom of the soil was set to 17.4 deg. C. The heat flux on the roof of the building and surface of the earth is 163.2 W/m{sup 2}. The soil sides are set to be adiabatic. The sensitivity analysis shows that the mesh size has no effect on the numerical results. This is mainly due to a small convection zone and large conduction zones in the modeling domain. The optimal domain boundary was found to be a soil thickness of 90 ft and a soil depth of 150 ft. The different sensitivity analysis performed here shows the optimal boundary domain to be used for thermal calculations is a soil depth of 150 ft beneath the SDU and a soil thickness of 90 ft. Anything larger would produce similar solutions but at a longer computational time to solve. The maximum temperature was more sensitive to soil properties as shown here. While the ambient temperature affected the max temperature linearly. Most of the heat transfer takes place downward vertically between the SDU and the soil beneath it. Using the optimal domain boundary determined by the sensitivity analyses, the maximum thermal loading to keep the maximum grout temperature below 95 deg. C is 1.646 W/m{sup 3}.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Dynamics of CO2 fluxes and concentrations during a shallow subsurface CO2 release

A field facility located in Bozeman, Montana provides the opportunity to test methods to detect, locate, and quantify potential CO2 leakage from geologic storage sites. From 9 July to 7 August 2008, 0.3 t CO2 d{sup -1} were injected from a 100-m long, {approx}2.5 m deep horizontal well. Repeated measurements of soil CO2 fluxes on a grid characterized the spatio-temporal evolution of the surface leakage signal and quantified the surface leakage rate. Infrared CO2 concentration sensors installed in the soil at 30 cm depth at 0 to 10 m from the well and at 4 cm above the ground at 0 and 5 m from the well recorded surface breakthrough of CO2 leakage and migration of CO2 leakage through the soil. Temporal variations in CO2 concentrations were correlated with atmospheric and soil temperature, wind speed, atmospheric pressure, rainfall, and CO2 injection rate.

54 ENVIRONMENTAL SCIENCES↗

Soil moisture and hydrology projections of the permafrost region – a model intercomparison

Abstract. This study investigates and compares soil moisture and hydrology projections of broadly used land models with permafrost processes and highlights the causes and impacts of permafrost zone soil moisture projections. Climate models project warmer temperatures and increases in precipitation (P) which will intensify evapotranspiration (ET) and runoff in land models. However, this study shows that most models project a long-term drying of the surface soil (0–20 cm) for the permafrost region despite increases in the net air–surface water flux (P-ET). Drying is generally explained by infiltration of moisture to deeper soil layers as the active layer deepens or permafrost thaws completely. Although most models agree on drying, the projections vary strongly in magnitude and spatial pattern. Land models tend to agree with decadal runoff trends but underestimate runoff volume when compared to gauge data across the major Arctic river basins, potentially indicating model structural limitations. Coordinated efforts to address the ongoing challenges presented in this study will help reduce uncertainty in our capability to predict the future Arctic hydrological state and associated land–atmosphere biogeochemical processes across spatial and temporal scales.

54 ENVIRONMENTAL SCIENCES↗

Downscaling and Validation of SMAP Radiometer Soil Moisture in CONUS

The SMAP (Soil Moisture Active/Passive) satellite provides global soil moisture (SM) estimates that can be used for scientific research and applications (such as the hydrological cycle, agriculture, ecology, and land atmosphere interactions). Currently, SMAP provides the enhanced radiometer-only SM product (L2SMP) at 9 km grid resolution. However, this spatial resolution is still not enough to satisfy the needs of some studies that require a finer spatial resolution SM product, particularly in agricultural and watershed applications. This study applied a downscaling algorithm to the SMAP 9 km SM product to produce a 1 km resolution over the CONUS (Contiguous United States). The downscaling algorithm is based on the relationship between temperature change and SM modulated by Normalized Difference Vegetation Index (NDVI) of a given time period. This relationship was modeled using variables derived from NLDAS (North America Land Data Assimilation System) and NASA's LTDR (Land Long Term Data Record) between 1981-2018. The algorithm was implemented uses the 1 km MODIS Aqua LST (Land Surface Temperature) product. The downscaled SMAP 1 km SM was validated using in situ SM measurements from the ISMN (International Soil Moisture Network). The validation metrics show an improved overall accuracy of the downscaled SM.

downscaling↗

Soil water content and evaporation determined by thermal parameters obtained from ground-based and remote measurements

A procedure is presented for calculating 24-hour totals of evaporation from wet and drying soils. Its application requires a knowledge of the daily solar radiation, the maximum and minimum, air temperatures, moist surface albedo, and maximum and minimum surface temperatures. Tests of the technique on a bare field of Avondale loam at Phoenix, Arizona showed it to be independent of season.

Reginato, R.↗

Passive microwave techniques for geophysical sensing of the earth from satellites

Passive microwave techniques for geophysical probing from aircraft and space have employed frequencies 1-300 GHz and have yielded information about atmospheric temperature and composition profiles and about surface parameters such as sea state, ice and snow type and extent, soil moisture, etc. The initially scientific program is now evolving into various operational spacecraft observatory systems; this mini-review summarizes recent accomplishments and future opportunities.

Staelin, D. H.↗

How similar are temperature and humidity profiles in the unstable boundary layer?

A comparison was made between temperature and humidity profiles obtained from radiosonde measurements under unstable conditions over hilly terrain in northeastern Kansas during the summer and fall of 1987. The summer profiles were found to be similar in a layer over the height range given by z = 65(plus or minus 45) to 124(plus or minus 54)m, where z is the height above the ground surface reference level. Evidence for this similarity was the closeness of the scaled ratio of the temperature and humidity gradients at any given time to the mean Bowen ratio determined at ground-based surface flux stations. Above the layer, in the outer region of the atmospheric boundary layer, it was found that the profiles of humidity and potential temperature are completely dissimilar in terms of the surface Bowen ratio. The profiles of the fall campaign when soil moisture content was low and vegetation senescent displayed a less pronounced similarity.

Sugita, Michiaki↗

Design and Development of the SMAP Microwave Radiometer Electronics

The SMAP microwave radiometer will measure land surface brightness temperature at L-band (1413 MHz) in the presence of radio frequency interference (RFI) for soil moisture remote sensing. The radiometer design was driven by the requirements to incorporate internal calibration, to operate synchronously with the SMAP radar, and to mitigate the deleterious effects of RFI. The system design includes a highly linear super-heterodyne microwave receiver with internal reference loads and noise sources for calibration and an innovative digital signal processor and detection system. The front-end comprises a coaxial cable-based feed network, with a pair of diplexers and a coupled noise source, and radiometer front-end (RFE) box. Internal calibration is provided by reference switches and a common noise source inside the RFE. The RF back-end (RBE) downconverts the 1413 MHz channel to an intermediate frequency (IF) of 120 MHz. The IF signals are then sampled and quantized by high-speed analog-to-digital converters in the radiometer digital electronics (RDE) box. The RBE local oscillator and RDE sampling clocks are phase-locked to a common reference to ensure coherency between the signals. The RDE performs additional filtering, sub-band channelization, cross-correlation for measuring third and fourth Stokes parameters, and detection and integration of the first four raw moments of the signals. These data are packetized and sent to the ground for calibration and further processing. Here we discuss the novel features of the radiometer hardware particularly those influenced by the need to mitigate RFI.

radio frequency interference↗

Ohio River Basin Water Resources: Monitoring Flash Drought Potential and Quantifying the Hydrologic Impacts in the Ohio River Basin

Flash drought conditions emerge in a matter of weeks following persistent weather anomalies, such as high temperatures or large vapor pressure deficits, that drive increased evaporative demand. Vegetation response rapidly depletes soil moisture, threatening surface water supplies, triggering significant crop loss, and increasing wildfire risk. Drought indices sensitive to flash drought are currently not included in drought forecast models in the Ohio River Basin (ORB). The team assessed and compared drought indices, gauge-based data, and satellite measurements over the course of the September 2019 flash drought event in the Ohio River Basin to investigate environmental fingerprints throughout flash drought evolution. Potential leading flash drought indicators were compared to the Standardized Precipitation Index (SPI) to aid the National Weather Service (NWS) Ohio River Forecast Center and Kentucky Climate Center in producing early warning flash drought forecasts. These drought indices included Evaporative Demand Drought Index (EDDI), Standardized Precipitation Evapotranspiration Index (SPEI), and Landscape Evaporative Response Index (LERI) (derived from Terra Moderate Resolution Imaging Spectroradiometer (MODIS)). Drought index behavior inherently varies based on parameters incorporated - EDDI measures evaporative demand through potential evapotranspiration, and demonstrates more variations due to sensitivity to seasonal changes in evaporative demand throughout the 2010-2019 study period. Conversely, LERI measures evaporative response through actual evapotranspiration, representing different environmental changes. Soil moisture response was evaluated using Soil Moisture Active Passive (SMAP) L-band radiometer data and Kentucky Mesonet gauge-based measurements. This analysis enables climatologists and weather forecasters to keep decision-makers and stakeholders better informed about drought risks, and to implement the appropriate actions for preparation of drought onset.

Adelaide Schmid↗