Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Single Crystal”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44

The viscoplastic behavior of Hastelloy-X single crystal

A viscoplastic constitutive model for simulating the behavior of Hastelloy-X single crystal material was derived based on crystallographic slip theory. To determine the appropriate constitutive model constants and to test the predictions of the model, tests on Hastelloy-X crystals were carried out, including the rate sensitivity, cyclic hardening, nonproportional hardening, relaxation, and strain rate dip tests. It was found necessary to include cube slip in the model in order to correlate the uniaxial behavior of the single crystal, to incorporate the interaction effects in both the hardening and the dynamic recovery evolution equations for the drag stress, and to successfully capture correct strain rate sensitivity under biaxial tension-torsion loading conditions.

Jordan, Eric H.↗

Fabrication of triangular nanobeam waveguide networks in bulk diamond using single-crystal silicon hard masks

A scalable approach for integrated photonic networks in single-crystal diamond using triangular etching of bulk samples is presented. We describe designs of high quality factor (Q = 2.51 × 10{sup 6}) photonic crystal cavities with low mode volume (V{sub m} = 1.062 × (λ/n){sup 3}), which are connected via waveguides supported by suspension structures with predicted transmission loss of only 0.05 dB. We demonstrate the fabrication of these structures using transferred single-crystal silicon hard masks and angular dry etching, yielding photonic crystal cavities in the visible spectrum with measured quality factors in excess of Q = 3 × 10{sup 3}.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Growth of Bulk Single Crystals of Dicyanovinyl-Ansiole and its Derivatives for Nonlinear Optical Applications

Bulk single crystals of a series of thermally stable nonlinear optical organic materials, Dicyanovinyl-anisole (DIVA) and their methoxy derivatives, have been successfully grown using the Bridgman-Stockbarger technique. The growth conditions are chosen to be temperature gradient of 5 to 10 C/cm and lowering rate of 0.1 to 0.3 mm/h. Single crystals of DIVA and its derivatives, of 8 x 8 x 50 cu mm in size, have been grown while maintaining a flat solid-liquid growth interface.

Gebre, T.↗

Electron Paramagnetic Resonance of Cr{sup 3+} Ions in Single Crystals of Yttrium Aluminum Borate YAl{sub 3}(BO{sub 3}){sub 4}

Single crystal of yttrium aluminum borate YAl{sub 3}(BO{sub 3}){sub 4} doped with chromium ions (1 at %) was studied using electron paramagnetic resonance spectroscopy. It is shown that chromium ions introduced into the sample occupy yttrium ion sites in the crystal structure. The parameters of the spin Hamiltonian of Cr{sup 3+} ions in the YAl{sub 3}(BO{sub 3}){sub 4} matrix are determined at different temperatures. The sign of the fine structure parameter D allows the conclusion that the chromium ions in YA1{sub 3}(BO{sub 3}){sub 4} single crystals have an easy-plane anisotropy.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Single crystal micromechanical resonator and fabrication methods thereof

The present invention relates to a single crystal micromechanical resonator. In particular, the resonator includes a lithium niobate or lithium tantalate suspended plate. Also provided are improved microfabrication methods of making resonators, which does not rely on complicated wafer bonding, layer fracturing, and mechanical polishing steps. Rather, the methods allow the resonator and its components to be formed from a single crystal.

36 MATERIALS SCIENCE↗

Single crystal growth, transport and scanning tunneling microscopy and spectroscopy of FeSe 1-x S x

Here, single crystals of sulfur-substituted iron selenide, FeSe 1- x S x , were grown within eutectics of molten halides, AlCl 3 /KCl, AlCl 3 /KCl/NaCl or AlCl 3 /KBr, under permanent temperature gradient. The innovative “ampoule in ampoule” design of a crystallization vessel allows obtaining mm-sized plate-like single crystals with a sulfur content up to x ~ 0.19. The sharp anomalies in the physical properties indicate the superconducting and nematic phase transitions in FeSe 0.96 at T C = 8.4 K and T N = 90 K, respectively. Scanning tunneling microscopy unearths the presence of dumbbell defects associated with Fe vacancies and dark defects at the chalcogen site associated with S within the FeSe 1- x S x series of compounds. Scanning tunneling spectroscopy shows the presence of two different superconducting gaps at both hole and electron pockets of the Fermi surface for low S content levels. As a function of sulfur content, T C follows the conventional dome-shaped curve while T N decreases with x . The overall appearance of the T – x phase diagram of FeSe 1- x S x suggests the importance of nematic fluctuations for the formation of the superconducting state in these compounds.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Excitons in PL Spectra of Cu(In,Ga)Se{sub 2} Single Crystals

A photoluminescence (PL) study of Cu(In,Ga)Se{sub 2} (CIGSe) single crystals, (grown by the vertical Bridgman technique) with the [Ga]/[Ga + In] ratio of 7 and 12% and the [Cu]/[In + Ga] ratio greater than unity, as measured by energy dispersive spectroscopy, is presented. Analysis of the excitation intensity and temperature dependence of the PL spectra suggested the excitonic nature of the observed near-band-edge emissions peaks. Free and bound excitons in CIGSe single crystals with both 7 and 12% Ga content are clearly observed, analyzed and identified. An activation energy of 19 meV is determined for the free exciton in the PL spectra of the sample with 12% Ga. The presence of the excitons demonstrated a high structural quality of the material.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Cavity Pull Rod: Device to Promote Single Crystal Growth from the Melt

A pull rod for use in producing a single crystal from a molten alloy is provided that includes an elongated rod having a first end and a second end, a first cavity defined at the first end and a second cavity defined at the first end and in communication with the first cavity. The first cavity receives the molten alloy and the second cavity vents a gas from the molten alloy to thereby template a single crystal when the pull rod is dipped into and extracted from the molten alloy.

Goldsby, Jon↗

Correlation between crystallographic superstructure and magnetic structures in finite magnetic fields: A neutron study on a single crystal of Ho2PdSi3

We present results of neutron diffraction experiments on a Ho2PdSi3 single crystal in the magnetically ordered state at T = 1.5 K for magnetic fields applied in the easy (0, 0, L) direction. Moderate fields of less than 0.8 T are sufficient to wipe out the antiferromagnetic order in the basal plane of the AlB2-type hexagonal lattice structure. Concurrently strong magnetic reflections along the (0, 0, L) direction develop with increasing fields that are closely related to the nuclear superstructure reflections found in the single crystal at all temperatures. The field dependence of the intensity of the these reflections is rather unusual: after a maximum at 0.6 T and a shallow minimum at 2 T a further increase of intensity for fields up to 5 T is observed. A phase transition into a field induced, saturated ferromagnetic state is expected only at very high fields (> 13 T) as inferred from magnetization data. For the origin of the high field magnetic structure two models are proposed and the corresponding model calculations are compared to our experimental results. Furthermore, the experimental data in low fields (< 0.8 T) are used to clarify the hitherto unsolved zero-field magnetic structure of Ho2PdSi3. The relevance of our findings with respect to other members of the R2PdSi3 series (R = Tb, Er, Tm and others) is emphasized.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Symmetry-lowering lattice distortion at the spin reorientation in MnBi single crystals

Here we report structural and physical properties determined by measurements on large single crystals of the anisotropic ferromagnet MnBi. The findings support the importance of magnetoelastic effects in this material. X-ray diffraction reveals a structural phase transition at the spin reorientation temperature T SR = 90 K. The distortion is driven by magneto-elastic coupling, and upon cooling transforms the structure from hexagonal to orthorhombic. Heat capacity measurements show a thermal anomaly at the crystallographic transition, which is suppressed rapidly by applied magnetic fields. Effects on the transport and anisotropic magnetic properties of the single crystals are also presented. Increasing anisotropy of the atomic displacement parameters for Bi with increasing temperature above T SR is revealed by neutron diffraction measurements. It is likely that this is directly related to the anisotropic thermal expansion in MnBi, which plays a key role in the spin reorientation and magnetocrystalline anisotropy. Finally, the identification of the true ground state crystal structure reported here may be important for future experimental and theoretical studies of this permanent magnet material, which have to date been performed and interpreted using only the high temperature structure.

36 MATERIALS SCIENCE↗

Method of Promoting Single Crystal Growth During Melt Growth of Semiconductors

The method of the invention promotes single crystal growth during fabrication of melt growth semiconductors. A growth ampoule and its tip have a semiconductor source material placed therein. The growth ampoule is placed in a first thermal environment that raises the temperature of the semiconductor source material to its liquidus temperature. The growth ampoule is then transitioned to a second thermal environment that causes the semiconductor source material in the growth ampoule's tip to attain a temperature that is below the semiconductor source material's solidus temperature. The growth ampoule so-transitioned is then mechanically perturbed to induce single crystal growth at the growth ampoule's tip.

Su, Ching-Hua↗

Creep property and microstructure evolution of a nickel-base single crystal superalloy in [011] orientation

The creep property and microstructure evolution of a single crystal superalloy with [011] orientation were investigated at the temperatures of 700 °C, 900 °C and 1040 °C. It is shown that there exist stages of primary, steady-state, and tertiary creep under the lower temperature 700 °C. As the temperature increases to high temperatures of 900 °C and 1040 °C, steady-state creep stage is reduced or disappears and the shape of creep curves is dominated by an extensive tertiary stage. The minimum creep strain rate exhibits power law dependence on the applied stress; the stress exponents at 700 °C, 900 °C and 1040 °C are 28, 13 and 6.5, respectively. Microstructure observation shows that the morphologies of γ′ phase almost keep original shape at the lower temperature 700 °C and high applied stress. With the increasing creep temperature, γ′ precipitates tend to link together and form lamellar structure at an angle of 45° inclined to the applied stress. Transmission electron microscopy (TEM) investigations reveal that multiple < 110 > (111) slip systems gliding in the matrix channels and shearing γ′ precipitates by stacking faults or bending dislocation pairs are the main deformation mechanism at the lower temperature of 700 °C. At the high temperatures of 900 °C and 1040 °C, dislocation networks are formed at γ/γ′ interfaces and the γ′ rafts are sheared by dislocation pairs. - Highlights: • Creep properties of < 011 >-oriented single crystal superalloys were investigated. • γ′ phases become rafting at an angle of 45° inclined to the applied stress. • Creep deformation mechanisms depend on temperature and stress.

36 MATERIALS SCIENCE↗

Magnetoresistance characteristics in individual Fe{sub 3}O{sub 4} single crystal nanowire

We report on the magnetoresistance (MR) and electron transport measurements observed on a single crystal magnetite nanowire prepared using a hydrothermal synthesis method. High-resolution electron microscopy revealed the single crystal magnetite nanowires with 80–120 nm thickness and up to 8 μm in length. Magnetic measurements showed the typical Verwey transition around 120 K with a 100 Oe room temperature coercivity and 45 emu/g saturation magnetization, which are comparable to bulk magnetite. Electrical resistance measurements in 5–300 K temperature range were performed by scanning gate voltage and varying applied magnetic field. Electrical resistivity of the nanowire was found to be around 5 × 10{sup −4} Ω m, slightly higher than the bulk and has activation energy of 0.07 eV. A negative MR of about 0.7% is observed for as-synthesized nanowires at 0.3 T applied field. MR scaled with increasing applied magnetic field representing the field-induced alignment of magnetic domain. These results are attributed to the spin-polarized electron transport across the antiphase boundaries, which implicate promising applications for nanowires in magnetoelectronics.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Single crystal tubes of beta alumina

Edge-defined, film-fed growth process allows both tubular shapes and single crystallinity to be achieved. Beta alumina in single crystal form makes possible membranes with improved conductivities. Single crystal membranes also eliminate problems associated with electrical short circuiting of membrane due to possible sodium metal diffusion.

Stormont, R. W.↗

Production of large-area single-crystal wafers of cubic SiC for semiconductor devices

A reproducible process is described for growing a thick single-crystal layer of cubic SiC on a single-crystal Si wafer by chemical vapor deposition. A buffer layer, grown in situ, is used between the cubic SiC and the Si substrate to minimize the effect of lattice mismatch. Layers of up to 34 microns thick and several sq cm in area have been grown. Wafers are obtained by chemically removing the Si substrates from the grown layers. Excellent electron channeling patterns produced by these wafers indicate very good crystal quality. Preliminary electrical measurements have yielded electron mobilities up to 380 sq cm/Vs.

Nishino, S.↗

Deconstructing the High Voltage Degradation Mechanisms in Na 2/3 Ni 1/3 Mn 2/3 O 2 with Single Crystals and Advanced Electrolyte

Abstract Sodium layered oxide cathodes can uniquely benefit from the existing lithium‐ion battery industry as sodium‐ion batteries gain traction as a potential low‐cost, drop‐in replacement. However, achieving relevant energy density with a suitable cycle life remains a challenge for sodium layered oxides. At high operating potentials, several competing degradation mechanisms prevent P2‐type Na 2/3 Ni 1/3 Mn 2/3 O 2 (≈550 Wh kg −1 ) from achieving meaningful cycle life—with bulk structural instability and surface reactivity being the primary retractors. Herein, the issue of particle cracking is addressed through detailed synthesis methods of “single‐crystal” materials. By comparison to a polycrystalline baseline, the single‐crystal materials quantify the capacity loss due to isolation of active material caused by intergranular particle cracking. The single crystal materials are then employed in cells with an advanced, “localized saturated electrolyte” (LSE) to demonstrate the magnitude of capacity loss due to electrolyte decomposition at the cathode surface. Mitigation of the surface reactivity through the LSE electrolyte effectively demonstrates the elevated importance of surface reactivity at high voltages despite the onset of egregious particle cracking. This work aims to guide future research into understanding molten‐salt assisted syntheses and advance the debate on surface versus bulk degradation.

Darga, Joe↗

Crystal structure of La{sub 2}Mo{sub 2}O{sub 9} single crystals doped with bismuth

Precision X-ray diffraction studies of La{sub 2-x}Bi{sub x}Mo{sub 2}O{sub 9} (x = 0.04, 0.06, and 0.18) single crystals are performed. It is found that in the compounds doped with bismuth, analogously with the structure of the metastable {beta}{sub ms} phase of pure La{sub 2}Mo{sub 2}O{sub 9} (LM), the La, Mo1, and O1 atoms deviate from the threefold axis on which they are located in the high-temperature {beta} phase. It is shown that bismuth atoms substitute for part of lanthanum atoms and occupy a position at the threefold axis in the neighborhood of the split lanthanum position. The implantation of bismuth atoms in the LM structure results in the return of a part of the molybdenum atoms to the position at the threefold axis. The occupancy of this position is equal to the occupancy of the bismuth atomic position.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ultrahigh‐Flux X‐ray Detection by a Solution‐Grown Perovskite CsPbBr 3 Single‐Crystal Semiconductor Detector

Abstract Solution‐processed perovskites are promising for hard X‐ray and gamma‐ray detection, but there are limited reports on their performance under extremely intense X‐rays. Here, a solution‐grown all‐inorganic perovskite CsPbBr 3 single‐crystal semiconductor detector capable of operating at ultrahigh X‐ray flux of 10 10 photons s −1 mm −2 is reported. High‐quality solution‐grown CsPbBr 3 single crystals are fabricated into detectors with a Schottky diode structure of eutectic gallium indium/CsPbBr 3 /Au. A high reverse‐bias voltage of 1000 V (435 V mm − 1 ) can be applied with a small and stable dark current of ≈60–70 nA (≈9–10 nA mm − 2 ), which enables a high sensitivity larger than 10 000 µC Gy air −1 cm − 2 and a simultaneous low detection limit of 22 nGy air s − 1 . The CsPbBr 3 semiconductor detector shows an excellent photocurrent linearity and reproducibility under 58.61 keV synchrotron X‐rays with flux from 10 6 to 10 10 photons s − 1 mm − 2 . Defect characterization by thermally stimulated current spectroscopy shows a similar low defect density of a synchrotron X‐ray and a lab X‐ray irradiated device. Solid‐state nuclear magnetic resonance spectroscopy suggests that the excellent performance of the solution‐grown CsPbBr 3 single crystal may be associated with its good short‐range order, comparable to the spectrometer‐grade melt‐grown CsPbBr 3 .

Pan, Lei↗