Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Simulation model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Advective gas flow in bentonite: Development and comparison of enhanced multi-phase numerical approaches

Understanding the impact of repository gas, generated from degradation of waste and its interaction with the host rock, is essential when assessing the performance and safety function of long-term disposal systems for radioactive waste. Numerical models based on conventional multi-phase flow theory have historically been applied to predict the outcome and impact of gas flow on different repository components. However, they remain unable to describe the full complexity of the physical processes observed in water-saturated experiments (e.g., creation of dilatant pathways) and thus, the development of novel representations for their description is required when assessing fully saturated clay-based systems. This was the primary focus of Task A within the international cooperative project DECOVALEX-2019 (D-2019) and refinement of these approaches is the primary focus of this study (Task B in the current phase of DECOVALEX-2023). This paper summarises development of enhanced numerical representations of key processes and compares the performance of each model against high-quality laboratory test data. Experimental data reveals that gas percolation in water-saturated compacted bentonite is characterised by four key features: (i) a quiescence phase, followed by (ii) the gas breakthrough, which leads to a (iii) peak value, which is then followed by (iv) a negative decay. Three models based on the multiphase flow theory have been developed. These models can provide good initial values and reasonable responses for gas breakthrough (although some of them still predict a too-smooth response). Peak gas pressure values are in general reasonably well captured, although maximum radial stress differences are observed at 48 mm from the base of the sample. Here, numerical peak values of 12.8 MPa are predicted, whereas experimental values are about 11 MPa. These models are also capable of providing a reasonable representation of the negative pressure decay following peak pressure. However, other key specific features (such as the timing of gas breakthrough) still require a better representation. The model simulations and their comparison with experimental data show that these models need to be further improved with respect to model parameter calibration, the numerical representation of spatial heterogeneities in material properties and flow localisation, and the upscaling of the related physical processes and parameters. To further understand gas flow localisation, a new conceptual model has been developed, which shows that discrete channels can possibly be induced through the instability of gas-bentonite interface during gas injection, thus providing a new perspective for modeling gas percolation in low-permeability deformable media.

58 GEOSCIENCES↗
DOE OSTI2025

Role of Forest Carbon Change in Shaping Future Land Use and Land Cover Change

Global change, particularly the changes in atmospheric CO 2 concentration, climatic variables, and nitrogen deposition, has been widely recognized and examined to have worldwide impacts on forest carbon. However, its influence on forest area required to meet the demand for timber and carbon storage and subsequent land use and land cover change (LULCC) is rarely studied. This study explores the role of global change-driven forest carbon change in shaping future global LULCC projections and investigates underlying drivers. We incorporated the global change impacts on forest carbon from the Canadian Land Surface Scheme Including Biogeochemical Cycles model simulations (driven by meteorological forcing projections from two Earth system models [ESMs]) into the Global Change Analysis Model, under three combinations of shared socioeconomic pathways and representative concentration pathways (SSP126, SSP370, and SSP585). Including forest carbon change decreases the projected expansion of managed forest and managed pasture, reduces the loss of unmanaged pastures and forests, and provides more cropland. The relative change in managed forest by 2100 is -4.0%, -21.7%, and -31.9%, under SSP126, SSP370, and SSP585, respectively, when forest carbon change is considered. CO 2 fertilization is the dominant driver, increasing forest vegetation and soil carbon by 37% and 4.1%, and leading to 78.6% of the total area with a change in land use types by 2100 under SSP585. In comparison, climate change reduces forest vegetation and soil carbon by -3.5% and -0.8%, influencing 23.9% of the total area with a change in land use types by 2100 under SSP585, while nitrogen deposition has minor impacts. Using meteorological forcing data from two ESMs leads to similar impacts of forest carbon change on LULCC in terms of sign and trend but different magnitudes. This study highlights the large impact of forest carbon change on shaping future LULCC dynamics and the critical role of CO 2 fertilization.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Real-time Nonlinear Model Predictive Control (NMPC) Strategies using Physics-Based Models for Advanced Lithium-ion Battery Management System (BMS)

Optimal operation of lithium-ion batteries requires robust battery models for advanced battery management systems (ABMS). A nonlinear model predictive control strategy is proposed that directly employs the pseudo-two-dimensional (P2D) model for making predictions. Using robust and efficient model simulation algorithms developed previously, the computational time of the nonlinear model predictive control algorithm is quantified, and the ability to use such models for nonlinear model predictive control for ABMS is established.

25 ENERGY STORAGE↗
DOE OSTI2025

Machine Learned Empirical Numerical Integrator from Simulated Data

Recently, a number of state-of-the-art surrogate machine learning (ML) models have been designed for global weather and climate prediction, which have been trained using reanalysis data products. Reanalysis data products are constructed using numerical model simulations that combine numerical integration of partial differential equations and parameterization schemes. These products are typically only archived and made available using coarsened spatial and temporal resolutions. This study explores the impact of the numerical generation methods used to produce the training datasets and the temporal resolution of those datasets on machine learning surrogate models. Using the nonlinear vector autoregression (NVAR) machine as an explainable ML technique, simple dynamical systems are emulated with ML models trained on data produced by three classical numerical integration schemes. NVAR is validated as a skillful ML method, capable of producing accurate predictions and, more importantly, reconstructing both the underlying dynamics and the numerical integration scheme used to generate the training data. However, the machine fails to generalize predictions on unseen test data generated by different numerical integration schemes, despite the underlying dynamical system being the same. This result provides a word of caution for the growing field of machine learning emulation of weather and climate dynamics. Furthermore, we illustrate using NVAR that training on temporally coarsened data may increase the required complexity of ML models and potentially introduce new numerical challenges. Finally, we discover that empirical integration schemes with arbitrary time-stepping sizes can be constructed directly from the data, which implies a potential for the development of empirical numerical integration schemes.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Biophysical Impact of Land-Use and Land-Cover Change on Subgrid Temperature in CMIP6 Models

In this study, we investigate the air temperature response to land-use and land-cover change (LULCC; cropland expansion and deforestation) using subgrid land model output generated by a set of CMIP6 model simulations. Our study is motivated by the fact that ongoing land-use activities are occurring at local scales, typically significantly smaller than the resolvable scale of a grid cell in Earth system models. It aims to explore the potential for a multimodel approach to better characterize LULCC local climatic effects. On an annual scale, the CMIP6 models are in general agreement that croplands are warmer than primary and secondary land (psl; mainly forests, grasslands, and bare ground) in the tropics and cooler in the mid–high latitudes, except for one model. The transition from warming to cooling occurs at approximately 40°N. Although the surface heating potential, which combines albedo and latent heat flux effects, can explain reasonably well the zonal mean latitudinal subgrid temperature variations between crop and psl tiles in the historical simulations, it does not provide a good prediction on subgrid temperature for other land tile configurations (crop vs forest; grass vs forest) under Shared Socioeconomic Pathway 5–8.5 (SSP5–8.5) forcing scenarios. A subset of simulations with the CESM2 model reveals that latitudinal subgrid temperature variation is positively related to variation in net surface shortwave radiation and negatively related to variation in the surface energy redistribution factor, with a dominant role from the latter south of 30°N. We suggest that this emergent relationship can be used to benchmark the performance of land surface parameterizations and for prediction of local temperature response to LULCC.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Bayesian calibration of viscous anisotropic hydrodynamic simulations of heavy-ion collisions

Owing to large pressure gradients at early times, standard hydrodynamic model simulations of relativistic heavy-ion collisions do not become reliable until O(1) fm/c after the collision. To address this one often introduces a prehydrodynamic stage that models the early evolution microscopically, typically as a conformal, weakly interacting gas. In such an approach the transition from the prehydrodynamic to the hydrodynamic stage is discontinuous, introducing considerable theoretical model ambiguity. Alternatively, fluids with large anisotropic pressure gradients can be handled macroscopically using the recently developed viscous anisotropic hydrodynamics (VAH). In high-energy heavy-ion collisions VAH is applicable already at very early times, and at later times transitions smoothly into conventional second-order viscous hydrodynamics. Here we present a Bayesian calibration of the VAH model with experimental data for Pb-Pb collisions at the LHC at $\sqrt{^{S}NN}$ = 2.76 A TeV. We find that the VAH model has the unique capability of constraining the specific viscosities of the quark-gluon plasma at higher temperatures than other previously used models.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2020

Non-local model for surface tension in fluid-fluid simulations

We propose a non-local model for surface tension obtained in the form of an integral of a molecular-force-like function with support 3.5e added to the Navier-Stokes momentum conservation equation. We demonstrate analytically and numerically that with the non-local model interfaces with a radius of curvature larger than the support length behave macroscopically and microscopically, otherwise. For static droplets, the pressure difference Pe,in - Pe,out satisfies the Young-Laplace law for droplet radius greater than 3.5e and other- wise deviates from the Young-Laplace law. The latter indicates that the surface tension in the proposed model decreases with decreasing radius of curvature, which agrees with molecular dynamics and experimental studies of nanodroplets. Using the non-local model we perform numerical simulations of droplets under dynamic conditions, including a rising droplet, a droplet in shear flow, and two colliding droplets in shear flow, and compare results with a standard Navier-Stokes model subject to the Young-Laplace boundary condition at the fluid-fluid interface implemented via the Conservative Level Set (CLS) method. We find good agreement with existing numerical methods and analytical results for a rising macroscopic droplet and a droplet in a shear flow. For colliding droplets in shear flow, the non- local model converges (with respect to the grid size) to the correct behavior, including sliding, coalescence, and merging and breaking of two droplets depending on the capillary number. In contrast, we find that the results of the CLS model are highly grid-size dependent.

Howard, Amanda A.↗
DOE OSTI2025

Coupling Remote Sensing With a Process Model for the Simulation of Rangeland Carbon Dynamics

Rangelands provide significant environmental benefits through many ecosystem services, which may include soil organic carbon (SOC) sequestration. However, quantifying SOC stocks and monitoring carbon (C) fluxes in rangelands are challenging due to the considerable spatial and temporal variability tied to rangeland C dynamics as well as limited data availability. We developed the Rangeland Carbon Tracking and Management (RCTM) system to track long-term changes in SOC and ecosystem C fluxes by leveraging remote sensing inputs and environmental variable data sets with algorithms representing terrestrial C-cycle processes. Bayesian calibration was conducted using quality-controlled C flux data sets obtained from 61 Ameriflux and NEON flux tower sites from Western and Midwestern US rangelands to parameterize the model according to dominant vegetation classes (perennial and/or annual grass, grass-shrub mixture, and grass-tree mixture). The resulting RCTM system produced higher model accuracy for estimating annual cumulative gross primary productivity (GPP) (R 2 > 0.6, RMSE <390 g C m -2 ) relative to net ecosystem exchange of CO 2 (NEE) (R 2 > 0.4, RMSE <180 g C m -2 ). Model performance in estimating rangeland C fluxes varied by season and vegetation type. The RCTM captured the spatial variability of SOC stocks with R 2 = 0.6 when validated against SOC measurements across 13 NEON sites. Model simulations indicated slightly enhanced SOC stocks for the flux tower sites during the past decade, which is mainly driven by an increase in precipitation. Future efforts to refine the RCTM system will benefit from long-term network-based monitoring of vegetation biomass, C fluxes, and SOC stocks.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Continental Scale Hydrostratigraphy: Comparing Geologically Informed Data Products to Analytical Solutions

Abstract This study synthesizes two different methods for estimating hydraulic conductivity (K) at large scales. We derive analytical approaches that estimate K and apply them to the contiguous United States. We then compare these analytical approaches to three‐dimensional, national gridded K data products and three transmissivity (T) data products developed from publicly available sources. We evaluate these data products using multiple approaches: comparing their statistics qualitatively and quantitatively and with hydrologic model simulations. Some of these datasets were used as inputs for an integrated hydrologic model of the Upper Colorado River Basin and the comparison of the results with observations was used to further evaluate the K data products. Simulated average daily streamflow was compared to daily flow data from 10 USGS stream gages in the domain, and annually averaged simulated groundwater depths are compared to observations from nearly 2000 monitoring wells. We find streamflow predictions from analytically informed simulations to be similar in relative bias and Spearman's rho to the geologically informed simulations. R ‐squared values for groundwater depth predictions are close between the best performing analytically and geologically informed simulations at 0.68 and 0.70 respectively, with RMSE values under 10 m. We also show that the analytical approach derived by this study produces estimates of K that are similar in spatial distribution, standard deviation, mean value, and modeling performance to geologically‐informed estimates. The results of this work are used to inform a follow‐on study that tests additional data‐driven approaches in multiple basins within the contiguous United States.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Evaluating EAMv2 Simulated High Latitude Clouds Using ARM Measurements in the Northern and Southern Hemispheres

Here, this study evaluates high latitude stratiform mixed-phase clouds (SMPC) in the atmosphere model of the Energy Exascale Earth System Model version 2 (EAMv2) by utilizing one-year-long ground-based remote sensing measurements from the Atmospheric Radiation and Measurement (ARM) program. A nudging approach is applied to model simulations for a constrained comparison with the ARM observations. Observed and modeled SMPCs are sampled and collocated to address the difference in data resolution, so that we can consistently evaluate their macrophysical properties at the North Slope of Alaska (NSA) site in the Arctic and the McMurdo (AWR) site in the Antarctic. We found that EAMv2 overestimates SMPC frequency of occurrence at both sites. However, the model captures the observed larger cloud frequency of occurrence at the NSA site. For collocated SMPCs, the annual statistics of observed cloud macrophysics are generally reproduced at the NSA site, while at the AWR site, there are larger biases. Compared to the AWR site, the lower cloud top and cloud base and the warmer cloud top temperature observed at NSA are well simulated. On the other hand, simulated cloud phase is substantially biased. The model largely overestimates liquid water path, and the ice water path is underestimated at NSA, but at AWR, the liquid water path is frequently underestimated due to the dominance of snow in Antarctic SMPCs. As a result, the observed hemispheric difference in cloud phase partitioning is misrepresented in EAMv2. This study implies that additional model development is needed for high latitude mixed-phase clouds.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Measured and Simulated Carbon Dynamics in Midwestern U.S. Corn‐Soybean Rotations

Abstract Corn ( Zea mays L.) and soybean ( Glycine max [L.] Merr.) production dominate Midwestern U.S. agriculture and impact the regional carbon and nitrogen cycles. Sustaining soil carbon is important for corn‐soybean production (CS); however, quantifying soil carbon changes requires long‐term field measurements and/or model simulations. In this study, changes in soil organic (SOC), inorganic (SIC), and total (TC) carbon; pH; total nitrogen (TN); and net ecosystem production (NEP) were measured in a conventional corn‐soybean rotation in central Iowa. Soil samples ( n = 42; 0–120 cm depth) were collected from two adjacent fields in 2005 and 2016. Eddy‐flux stations set up in the fields continuously monitored NEP from 2005–2016, and net biome production (NBP) was calculated using yield records. The DayCENT model was used to simulate the effects of conventional management practices on soil carbon and calibrated with field‐measured NEP and SOC. Measured soil TC (0–120 cm) decreased by −14.19 ± 6.25 Mg ha −1 , with highest reductions in SOC and SIC ( p < 0.05) at 0–15 and 90–120 cm, respectively. Measured TN decreased by −0.7 ± 0.29 Mg ha −1 with N‐accumulation at 60–90 cm ( p < 0.05). Eddy‐flux NBP decreased by −13.19 ± 0.05 Mg ha −1 . Soil and eddy‐flux records show a carbon reduction by −1.14 ± 0.63 and −1.20 ± 0.06 Mg ha −1 yr −1 , respectively. The validated DayCENT model suggests that all SOC pools declined. We postulate that conventional CS production has adverse effects on C and N dynamics in Midwestern United States.

Dold, C.↗
DOE OSTI2025

ATEAM4Py: An Efficient and Scalable Python-Based Model for Charging Demand

This report details the development and implementation of ATEAM4Py, a Python-based simulation model that projects demand for battery electric vehicle (BEV) charging based on adoption trends and consumer behavior. With Exelon’s support, Argonne National Laboratory converted the original Java-based Agent-based Transportation Energy Analysis Model (ATEAM) into Python, resulting in a faster and more efficient tool for forecasting the timing, location, and scale of charging demand growth. ATEAM4Py tackles key challenges in simulation efficiency and runtime, supporting the strategic development of cost-effective grid capacity expansion strategies and ensuring reliable service for stakeholders.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2026

The Role of Internal Variability in Springtime Arctic Amplification from 1980 to 2022

Arctic amplification (AA) refers to the enhanced warming of the Arctic relative to the global average due to rising greenhouse gases, measured as the ratio of Arctic-mean to global-mean surface air temperature (SAT) trends. From 1980 to 2022, annual-mean AA reached 4.2 (Arctic defined as north of 70°N). Climate models simulate AA but fail to reproduce its magnitude. Sweeney et al. attributed much of this model–observation discrepancy to internal variability. AA shows seasonality and so does the discrepancy. Spring (March–May) shows the largest gap: Observed AA is 4.2, while the multimodel mean is 2.7. This raises several questions: 1) What role does internal variability play in observed spring AA? 2) How does simulated spring AA compare to observations when internal variability is removed? 3) If internal variability is significant, what mechanisms drive it? To address these, we adapted the machine learning algorithm from Sweeney et al., training on simulated multidecadal spring SAT and sea level pressure (SLP) trend maps. Our results show that internal variability enhanced spring Arctic warming by 37% and reduced global warming by 10%. Removing internal variability reconciles the spring AA discrepancy. The estimated internal contribution to Arctic spring warming is supported by an independent dynamical adjustment approach. We identify an atmospheric circulation pattern in observations associated with this internal warming. Observed internal Siberian SAT and SLP trends follow the simulated SAT–SLP relationship but lie at the distribution’s extreme, suggesting models generally underestimate internal variability unless the observed configuration reflects a rare real-world realization.

Arctic↗
DOE OSTI2020

Identifying the nature of the QCD transition in relativistic collision of heavy nuclei with deep learning

Using deep convolutional neural network (CNN), the nature of the QCD transition can be identified from the final-state pion spectra from hybrid model simulations of heavy-ion collisions that combines a viscous hydrodynamic model with a hadronic cascade “after-burner”. Two different types of equations of state (EoS) of the medium are used in the hydrodynamic evolution. The resulting spectra in transverse momentum and azimuthal angle are used as the input data to train the neural network to distinguish different EoS. Different scenarios for the input data are studied and compared in a systematic way. A clear hierarchy is observed in the prediction accuracy when using the event-by-event, cascade-coarse-grained and event-fine-averaged spectra as input for the network, which are about 80%, 90% and 99%, respectively. A comparison with the prediction performance by deep neural network (DNN) with only the normalized pion transverse momentum spectra is also made. High-level features of pion spectra captured by a carefully-trained neural network were found to be able to distinguish the nature of the QCD transition even in a simulation scenario which is close to the experiments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Development and testing of coarse-grained models for ultrasonic simulations of cast austenitic stainless steel

Ultrasonic inspection of cast austenitic stainless steel (CASS) in the nuclear industry is particularly challenging because of sound field scatter and attenuation caused by the coarse-grained microstructure. Modeling and simulation are important tools in ultrasonic testing, as they can be used to help address key aspects of inspections, such as developing new probe designs, predicting inspection reliability, and testing phased-array focal laws. However, developing a useful and reliable CASS model is challenging due to the many grain interfaces and crystalline orientations that must be captured. We demonstrate a method of creating a realistic CASS model that is usable in CIVA, a commercially available modeling and simulation software platform. Using polished and chemically etched sections, we generate models of a coarse-grained equiaxed specimen and a columnar specimen. We also test an alternative method of generating a coarse-grained model using Voronoi regions. We qualitatively compare sound field scatter and quantitatively compare sound field attenuation and beam partitioning in simulated sound fields to those of laboratory-measured sound fields. Results show that the Voronoi models perform as well as or better than the models based on actual grain morphology. Here we also show that model-to-model randomness in Voronoi grain structure can impact the magnitude of a simulated echo response by a factor of two or more. Although CASS models are potentially a good depiction of reality for a given scenario, they should not be considered representative since CASS morphology can change significantly from specimen to specimen or within the same specimen.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Enabling Efficient Surveillance, Control, and Automation of Geothermal Operations with Advanced Predictive Analytics

Automation and control of geothermal energy production and operations require reliable and efficient predictive tools. While physics-based simulation offers a comprehensive tool for predicting energy production performance in geothermal systems, predicting the behavior of geothermal reservoirs involves complex multi-physics processes with coupling effects, highly uncertain input parameters and subsurface descriptions. Moreover, building, running, and integrating simulation models into standard model calibration and optimization workflows entail significant technical and computational efforts. An emerging alternative to physics-based simulation is data-driven predictive analytics models that have gained popularity in energy industry. In this report, we develop novel predictive models for integration into real-time fault diagnosis and model predictive control algorithms to improve the efficiency of energy production operations in geothermal reservoirs. The report includes two major research Thrust Areas, that is, the surface power plant and the subsurface reservoir.

15 GEOTHERMAL ENERGY↗
DOE OSTI2026

Scalable foundation models for numerical simulations on HPC platforms

In recent years, foundation models (FMs) have begun to reshape numerical simulations on high-performance computing (HPC) platforms. These large, pre-trained AI models enable rapid predictions across a broad range of physical domains, including Earth system modeling, fluid dynamics, materials science, as well as complex multi-modal simulations in aerospace engineering and fusion research. By training on diverse datasets, FMs learn intricate relationships and underlying physical behavior while also enabling the quantification of uncertainty in their predictions. This capability allows simulations that once required days of numerical calculation to be completed in minutes (FM inference), supporting real-time design optimization, uncertainty-aware decision making, and more comprehensive exploration of complex scenarios.

AI↗
DOE OSTI2025

Deep reinforcement learning control for co-optimizing energy consumption, thermal comfort, and indoor air quality in an office building

With the recent demand for decarbonization and energy efficiency, advanced HVAC control using Deep Reinforcement Learning (DRL) becomes a promising solution. Due to its flexible structures, DRL has been successful in energy reduction for many HVAC systems. However, only a few researches applied DRL agents to manage the entire central HVAC system and control multiple components in both the water loop and the air loop, owing to its complex system structures. Moreover, those researches have not extended their applications by incorporating the indoor air quality, especially both CO2 and PM2.5concentrations, on top of energy saving and thermal comfort, as achieving those objectives simultaneously can cause multiple control conflicts. What's more, DRL agents are usually trained on the simulation environment before deployment, so another challenge is to develop an accurate but relatively simple simulator. Therefore, we propose a DRL algorithm for a central HVAC system to co-optimize energy consumption, thermal comfort, indoor CO2 level, and indoor PM2.5 level in an office building. To train the controller, we also developed a hybrid simulator that decoupled the complex system into multiple simulation models, which are calibrated separately using laboratory test data. The hybrid simulator combined the dynamics of the HVAC system, the building envelope, as well as moisture, CO2, and particulate matter transfer. Three control algorithms (rule-based, MPC, and DRL) are developed, and their performances are evaluated on the hybrid simulator environment with a realistic scenario (i.e., with stochastic noises). The test results showed that, the DRL controller can save 21.4 % of energy compared to a rule-based controller, and has improved thermal comfort, reduced indoor CO2 concentration. The MPC controller showed an 18.6 % energy saving compared to the DRL controller, mainly due to savings from comfort and indoor air quality boundary violations caused by unmeasured disturbances, and it also highlights computational challenges in real-time control due to non-linear optimization. Finally, we provide the practical considerations for designing and implementing the DRL and MPC controllers based on their respective pros and cons.

Guo, Fangzhou↗