Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Simulation Cases”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

Large Eddy Simulations of a Single-Injector Cooling Flow Using the High-Order Flux Reconstruction Method

A single-injector cooling flow into a heated crossflow was used as a validation case for large eddy simulations (LES) from two high-order CFD codes with comparisons to a state-of-the-art Reynolds averaged Navier-Stokes (RANS) turbulence model. The focus of this paper is on the validation of LES for one of the high-order CFD codes, namely the GFR (Glenn Flux Reconstruction) code that is being developed at NASA Glenn Research Center. Fourth-order LES were performed for the single-injector cooling flow configuration at blowing ratios of both 1.0 and 2.0, and a fifth-order LES was also performed with a blowing ratio of 1.0. The GFR simulations agree very well with the experiment mean quantities and reasonably well with the experiment turbulence quantities. The LES solutions from GFR and the other high-order CFD code, FDL3DI, agreed very closely for nearly every flow quantity examined, despite the fact that these two codes use completely different numerical methods, different grid geometries and domains, and different inflow boundary conditions. Finally, both LES show a significant accuracy improvement over RANS turbulence models for flows with large temperature gradients, where the standard gradient diffusion approximation is insufficient for temperature predictions.

Large Eddy Simulation↗
NASA NTRS1981

On the use of the OCM's quadratic objective function as a pilot rating metric

A correlation between the magnitude of the quadratic objective function from an optimal control pilot model and the subjective rating of the vehicle and task provides a valuable tool for handling qualities research and flight control synthesis. An analysis of simulation results for fourteen aircraft configurations flight tested earlier was conducted. A fixed set of pilot model parameters, are found for all cases in modeling the simulated regulation task. The agreement obtained between performance statistics is shown and a strong correlation was obtained between the cost function and rating.

Schmidt, D. K.↗
DOE OSTI2020

Modeling q 95 windows for the suppression of edge localized modes by resonant magnetic perturbations in the DIII-D tokamak

A toroidal asymptotic matching model of the response of a tokamak plasma to a static resonant magnetic perturbation (RMP) is used to simulate the n = 3 RMP-induced edge-localized-mode-suppression windows in q 95 that are evident when the plasma current is slowly ramped in DIII-D discharge #145380. All quantities employed in the simulation are derived from experimental measurements, apart from the neutral particle data. Three cases are considered. In the first case, the natural frequencies of tearing modes resonant in the plasma are determined by the ion flows at the corresponding resonant surfaces, which is the prediction of nonlinear tearing mode theory. In the second case, the natural frequencies are determined by the local E x B velocities at the resonant surfaces. In the third case, the natural frequencies are determined by the electron flows at the resonant surfaces, which is the prediction of linear tearing mode theory. The second case gives the best agreement between the simulations and the experimental observations. The first and third cases only lead to partial agreement between the simulations and the observations. In the first case, the lack of complete agreement may be a consequence of using an inaccurate assumption for the neutral particle distribution in the pedestal. In the third case, the lack of complete agreement is probably due to the fact that the response of a tokamak plasma to an RMP is not accurately described by linear tearing mode theory.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

FY22 Progress Report on BISON Metallic Fuel Model Development and V&V Using EBR-II Legacy Data

In this report, the activities and achievements made by Argonne National Laboratory for the Nuclear Energy Advanced Modeling and Simulation (NEAMS) BISON code metallic fuel validation and verification project in FY2022 are summarized. The FIPD-BISON integration powered metallic fuel low-burnup swelling framework has been enhanced to cover both radial and axial swelling analyses. Axial-dependent as-fabricated fuel radius profiles have been used to improve the accuracy in evaluating radial swelling strain. The simulations of the IFR experiment X447, which was focused on FCCI/CCCI induced cladding degradation and failure, have been converted into a BISON metallic fuel assessment case with detailed documentation, which is also the first FIPD-BISON integration powered assessment case in BISON. A FIPD-BISON integration repository has been established to be an optional submodule of BISON to support FIPD-BISON integration powered assessment cases. Preliminary trials to simulate the in-cell out-of-pile transient experiment have been made after implementing some essential models such as cladding plasticity models and liquid phase penetration models. The initial results are promising and help identify gaps that need to be filled in FY2023 and beyond, to eventually achieve OPTD-BISON integration powered assessment cases.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
NASA NTRS1973

Digital simulation of the serpentuator using MARSYAS

Serpentuator is a serpentine teleoperator device for intravehicular and extravehicular activities in space. The serpentuator is simulated using simulation software system MARSYAS and using the Component-Connection Simulation model and the Direct Simulation model. A comparison of the results for the two cases shows that under identical conditions, simulation execution time in the Component-Connection model case is reduced by a factor of the order of 100. A visual display of the serpentuator positions is obtained using the AMTRAN system on the Datacraft DC 6024 computer.

Singh, S., P.↗
DOE OSTI2025

Computational Modeling of Graphite Degradation due to Molten Salt Infiltration and Wear

Molten-salt reactors (MSRs) represent a promising next-generation reactor design, with graphite serving as a moderator and/or reflector in several designs. However, due to limited experimental data and operational experience, a technical understanding of the structural integrity of graphite in molten salt environments remains incomplete. This report presents a modeling-based evaluation of graphite degradation in MSR environments, focusing on the effects of salt infiltration in fuel salt-based designs and surface wear in pebble bed reactor designs. The objective of this study is to enhance understanding of the structural integrity challenges posed by these degradation mechanisms and to provide a framework for assessing graphite behavior in MSRs. The first part of the report investigates the phenomenon of molten salt infiltration into graphite. This infiltration occurs when molten salt permeates the interconnected pore structure of the graphite moderator, driven by factors such as pressure differentials and the physical properties of both the salt and graphite. The infiltration process is influenced by characteristics of the pore structure, viscosity of the molten salt, and the interfacial energies between the graphite, salt, and the atmosphere within the graphite pore. Utilizing a coupled multiphysics modeling approach with Grizzly software, the study evaluates the stress induced by internal heat sources due to infiltration, which can lead to structural concerns. This evaluation is crucial for understanding how infiltration affects the mechanical integrity of graphite components in MSRs. The study considers the Molten-Salt Reactor Experiment (MSRE) graphite stringer geometry due to the availability of relevant data. Through detailed finite element analysis, the study examines stress distributions at varying infiltration percentages, revealing that stress levels increase with higher amounts of infiltration. Rare-event simulations, using the parallel subset simulation (PSS) framework, further quantify the failure probabilities under input uncertainties, with a user-specified failure metric. The PSS framework also identifies critical input parameters that significantly affect the stress values, including infiltration amount, thermal conductivity, and power density. Additionally, considering realistic reactor scenarios, the analysis was performed to account for the combined effects of radiation and infiltration, and modeling strategies on how to analyze new reactor designs or new graphite grades are discussed. The second part of the report focuses on wear mechanisms in pebble bed-based MSRs. As graphite fuel pebbles interact with the graphite reflector block, wear can result in material loss and the formation of surface defects, which may act as stress concentrators. A similar multiphysics modeling framework is employed to assess the impact of wear on the structural integrity of graphite components. This study considers a generic fluoride-cooled high-temperature reactor (gFHR) design due to the availability of comprehensive data. Worst-case scenario dimensions of the reflector blocks were analyzed under thermal and radiation conditions. Subsequently, wear in the form of idealized pits and grooves is modeled on the inner surface of the graphite block, with the maximum stress from previous simulations. The simulations show that groove-type defects are more detrimental than pits, leading to higher stress concentrations. Considering worst-case simulation scenarios and experimental wear rates, it was determined that the formation of a surface defect critical enough to affect the stress may not be possible in a gFHR design. Overall, the findings of this research contribute to the development of robust modeling tools for predicting graphite behavior under various operational conditions in MSRs.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2021

GeantV: Results from the Prototype of Concurrent Vector Particle Transport Simulation in HEP

Full detector simulation was among the largest CPU consumers in all CERN experiment software stacks for the first two runs of the Large Hadron Collider. In the early 2010s, it was projected that simulation demands would scale linearly with increasing luminosity, with only partial compensation from increasing computing resources. The extension of fast simulation approaches to cover more use cases that represent a larger fraction of the simulation budget is only part of the solution, because of intrinsic precision limitations. The remainder corresponds to speeding up the simulation software by several factors, which is not achievable by just applying simple optimizations to the current code base. In this context, the GeantV R&D project was launched, aiming to redesign the legacy particle transport code in order to benefit from features of fine-grained parallelism, including vectorization and increased locality of both instruction and data. This paper provides an extensive presentation of the results and achievements of this R&D project, as well as the conclusions and lessons learned from the beta version prototype.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2022

MOSCATO Development and Integration in Fiscal Year 2022

During FY21, we conducted ongoing development work for the MOSCATO (Molten Salt Chemistry and Transport) solver. The code development work primarily consisted of transitioning capabilities from the original version of the solver, which was written in OpenFOAM, into Nek5000. In doing so, a fast, highly parallelizable solver was created that is capable of complex chemistry and corrosion simulations for engineering-scale molten salt systems. The Nek5000 version of MOSCATO is now fully featured and capable of higher-fidelity simulations than were previously possible. Demonstration cases including a thermal convection loop have been simulated to test these new capabilities. We built upon the work for FY22 and improved the code from several different perspectives. First, we improved the user interface by adding a new component to the official Nek5000 input file (.par). This new part contains documents parameters like, salt properties (density, viscosity, Cp, thermal conductivity), diffusion coefficients, standard potential, etc. Second, we built a conversion script to extract salt properties from the MSTDB-TP salt database and write to MOSCATO input file. Third, we migrated the code to NekRS, which is the GPU branch of Nek5000 and suitable for next generation supercomputers. Verification and Validation (V&V) work was also continued in FY22. Two tasks were performed. The first V&V task involved the validation of the Poisson-Nernst-Planck equation solver and Butler-Volmer electrode kinetics, by comparing with numerical and experimental data about thermoelectric cells. The second task involved the comparisons to corrosion results from a thermal convection loop run during the MSRE era. Satisfactory agreement was obtained from both tasks.

Yuan, Haomin↗
NASA NTRS2004

The Response of the North Atlantic Bloom to NAO Forcing

Results from the climatologically forced coupled ice/ocean/biogeochemical model that covers the Arctic and North Atlantic Oceans are presented and compared to the chlorophyll fields of satellite-derived ocean color measurements. Biogeochemical processes in the model are determined from the interactions among four phytoplankton functional groups (diatoms, chlorophytes, cyanobacteria and coccolithophores) and four nutrients (nitrate, ammonium, silicate and dissolved iron). The model simulates the general large-scale pattern in April, May and June, when compared to both satellite-derived and in situ observations. The subpolar North Atlantic was cool in the 1980s and warm in the latter 1990s, corresponding to the CZCS and SeaWiFS satellite observing periods, respectively. The oceanographic conditions during these periods resemble the typical subpolar upper ocean response to the NAO+ and NAO-phases, respectively. Thus, we use the atmospheric forcing composites from the two NAO phases to simulate the variability of the mid-ocean bloom during the satellite observing periods. The model results show that when the subpolar North Atlantic is cool, the NAO+ case, more nutrients are available in early spring than when the North Atlantic is warm, the NAO-case. However, the NAO+ simulation produces a later bloom than the NAO-simulation. This difference in the bloom times is also identified in SeaWiFS and CZCS satellite measurements. In the model results, we can trace the difference to the early diatom bloom due to a warmer upper ocean. The higher nutrient abundance in the NAO+ case did not provide larger total production than in the NAO- case, instead the two cases had a comparable area averaged amplitude. This leads us to conclude that in the subpolar North Atlantic, the timing of the spring phytoplankton bloom depends on surface temperature and the magnitude of the bloom is not significantly impacted by the nutrient abundance.

Mizoguchi, Ken-Ichi↗
NASA NTRS2010

Computation of Unsteady Flow in Flame Trench For Prediction of Ignition Overpressure Waves

Computational processes/issues for supporting mission tasks are discussed using an example from launch environment simulation. Entire CFD process has been discussed using an existing code; STS-124 conditions were revisited to support wall repair effort for STS-125 flight; when water bags were not included, computed results indicate that IOP waves with the peak values have been reflected from SRB s own exhaust hole; ARES-1X simulations show that there is a shock wave going through the unused exhaust hole, however, it plays a secondary role; all three ARES-1X cases and STS-1 simulations showed very similar IOP magnitudes and patters on the vehicle; with the addition of water bags and water injection, it will further diminish the IOP effects.

Kwak, Dochan↗
NASA NTRS2020

Analysis of Sample Acquisition Dynamics Using Discrete Element Method

The analysis presented in this paper is conducted in the framework of the Ocean Worlds Autonomy Testbed for Exploration Research and Simulation (OceanWATERS) project, currently under development at NASA Ames Research Center. OceanWATERS aims at designing a simulation environment which allows for testing autonomy of scientific lander missions to the icy moons of our solar system. Mainly focused on reproducing the end effector interaction with the inherent terrain, this paper introduces a novel discrete element method (DEM)-based approach to determine forces and torques acting on the lander’s scoop during the sample acquisition process. An accurate force feedback from the terrain on the scoop is required by fault-detection and autonomous decision-making algorithms to identify when the requested torque on the robotic arm’s joints exceeds the maximum available torque. Knowledge of the terrain force feedback significantly helps evaluating the arm’s links structural properties and properly selecting actuators for the joints. Models available in literature constitute a partial representation of the dynamics of the interaction. As an example, Balovnev derived an analytical expression of the vertical and horizontal force acting on a bucket while collecting a sample as a function of its geometry and velocity, soil parameters and reached depth. Although the model represents an adequate approximation of the two force components, it ignores the direction orthogonal to the scoop motion and neglects the torque. This work relies on DEM analysis to compensate for analytical models’ deficiencies and inaccuracies, i. e. provide force and torque 3D vectors, defined in the moving reference (body) frame attached to the scoop, at each instant of the sample collection process. Results from the first presented analysis relate to the specific OceanWATERS sampling strategy, which consists of collecting the sample through five consecutive passes with increasing depth, each pass following the same circularlinear- circular trajectory. Data is collected given a specific scoop design interacting with two types of bulk materials, which may characterize the surface of icy planetary bodies: snow and ice. Although specifically concerned with the OceanWATERS design, this first analysis provides the expected force trends for similar sampling strategies and allows to deduce phenomenological information about the general scooping process. In order to further instruct the community on the use of DEM tools as a solution to the sampling collection problem, two more analyses have been carried out, mainly focused on reducing the DEM computation time, which increases with a decrease in particle size. After running a set of identical simulations, where the only changing parameter is the size of the spherical particle, it is observed that the resulting force trajectories, starting from a given particle size, converge to the true trend. It is deducible that a further decrease in size yields negligible improvements in the accuracy, while it sensibly increases computation time. A final analysis aims at discussing limitations of approximating bulk material particles having a complex shape, e. g. ice fragments, with spheres, by comparing force trends resulting in the two cases for the same simulation scenario.

Catanoso, Damiana↗
DOE OSTI2021

Developing and Testing a Novel Stochastic Ice Microphysics Parameterization for Cloud and Climate Models Using ARM Field Campaign Data (Final Progress Report)

The major goals of this project were: 1) to use field campaign measurements from DOE’s Atmospheric Radiation Measurement (ARM) program to characterize variability of important parameters describing properties of ice particles in the atmosphere; 2) based on this observational analysis, to develop a parameterization scheme for weather and climate models that stochastically varies these parameters, and implement the new scheme into a weather model called the Weather Research and Forecasting model (WRF); 3) to use WRF coupled with the new stochastic scheme to simulate ARM field campaign thunderstorm cases and analyze how accounting for this parameter variability affects the model simulations. This work was performed jointly between the National Center for Atmospheric Research, University of Oklahoma, and University of Utah. To accomplish these goals, we extended an approach previously developed to characterize the variability in the size distribution of ice particles to parameters that are explicitly represented in models (i.e., relationships between ice particle mass and size, and between particle fall velocity and size). Our project was, to our knowledge, the first to apply observationally-constrained estimates of this parameter variability describing mass-size and fall velocity-size in a modeling framework. Our results showed efficacy of the approach, evaluated using ARM observations. Similarly, to our knowledge, work in this project was the first to propose and evaluate in detail a stochastic approach for unresolved turbulent mixing in high-resolution model simulations against detailed, benchmark large eddy simulations and ARM observations. Results showed some promising behavior, particularly with increased mixing and dilution of air in thunderstorm cores with surrounding environmental air, bringing the stochastic simulations closer to the benchmark large eddy simulations; however, results were somewhat degraded using stochastic mixing compared to observations from the AMIE/DYNAMO field campaign. This project also further refined and applied a modeling methodology called “piggybacking” that can robustly separate dynamical and thermodynamic impacts of model changes, and comparison studies of different models based on cases developed from ARM observations. Finally, this project directly supported three graduate students who completed their PhDs as well as a postdoctoral research fellow.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS2012

LightForce: An Update on Orbital Collision Avoidance Using Photon Pressure

We present an update on our research on collision avoidance using photon-pressure induced by ground-based lasers. In the past, we have shown the general feasibility of employing small orbit perturbations, induced by photon pressure from ground-based laser illumination, for collision avoidance in space. Possible applications would be protecting space assets from impacts with debris and stabilizing the orbital debris environment. Focusing on collision avoidance rather than de-orbit, the scheme avoids some of the security and liability implications of active debris removal, and requires less sophisticated hardware than laser ablation. In earlier research we concluded that one ground based system consisting of a 10 kW class laser, directed by a 1.5 m telescope with adaptive optics, could avoid a significant fraction of debris-debris collisions in low Earth orbit. This paper describes our recent efforts, which include refining our original analysis, employing higher fidelity simulations and performing experimental tracking tests. We investigate the efficacy of one or more laser ground stations for debris-debris collision avoidance and satellite protection using simulations to investigate multiple case studies. The approach includes modeling of laser beam propagation through the atmosphere, the debris environment (including actual trajectories and physical parameters), laser facility operations, and simulations of the resulting photon pressure. We also present the results of experimental laser debris tracking tests. These tests track potential targets of a first technical demonstration and quantify the achievable tracking performance.

Stupl, Jan↗
DOE OSTI2020

The Role of the Solvent in the Condensed-Phase Dynamics and Identity of Chemical Bonds: The Case of the Sodium Dimer Cation in THF

When a solute molecule is placed in solution, is it acceptable to presume that its electronic structure is essentially the same as in the gas phase? In this paper, we address this question from a simulation perspective for the case of the sodium dimer cation (Na 2 + ) molecule in both liquid Ar and liquid tetrahydrofuran (THF). In previous work, we showed that when local specific interactions between a solute and solvent are energetically on the order of a hydrogen bond, the solvent can become part of the chemical identity of the solute. Here, using mixed quantum/classical molecular dynamics simulations, we see that for the Na 2 + molecule, solute--solvent interactions lead to two stable, chemically-distinct coordination states (Na(THF) 4 -Na(THF) 5 + and Na(THF) 5 -Na(THF) 5 + ) that are not only stable themselves as gas-phase molecules but that also have a completely new electronic structure with important implications for the excited-state photodissociation of this molecule in the condensed phase. Furthermore, we show through a set of comparative classical simulations that treating the solute's bonding electron explicitly quantum mechanically is necessary to understand both the ground-state dynamics and chemical identity of this simple diatomic molecule; even use of the quantum-derived potential of mean force is insufficient to describe the behavior of the molecule classically. Lastly, we calculate the results of a proposed transient hole-burning experiment that could be used to spectroscopically disentangle the presence of the different coordination states.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS2003

Assessment of Models of Chemically Reacting Granular Flows

A report presents an assessment of a general mathematical model of dense, chemically reacting granular flows like those in fluidized beds used to pyrolize biomass. The model incorporates submodels that have been described in several NASA Tech Briefs articles, including "Generalized Mathematical Model of Pyrolysis of Biomass" (NPO-20068) NASA Tech Briefs, Vol. 22, No. 2 (February 1998), page 60; "Model of Pyrolysis of Biomass in a Fluidized-Bed Reactor" (NPO-20708), NASA Tech Briefs, Vol. 25, No. 6 (June 2001), page 59; and "Model of Fluidized Bed Containing Reacting Solids and Gases" (NPO- 30163), which appears elsewhere in this issue. The model was used to perform computational simulations in a test case of pyrolysis in a reactor containing sand and biomass (i.e., plant material) particles through which passes a flow of hot nitrogen. The boundary conditions and other parameters were selected for the test case to enable assessment of the validity of some assumptions incorporated into submodels of granular stresses, granular thermal conductivity, and heating of particles. The results of the simulation are interpreted as partly affirming the assumptions in some respects and indicating the need for refinements of the assumptions and the affected submodels in other respects.

Bellan, Josette↗
DOE OSTI2022

FY22 Progress on Computational Modeling of the Water-Based NSTF

This report summarizes the system-level modeling effort by Argonne National Laboratory (Argonne) of the Natural convection Shutdown heat removal Test Facility (NSTF) in FY22. As an extension of the effort from FY21, this year’s work focuses primarily on the two-phase modeling of the NSTF using RELAP5-3D, particularly with the inclusion of the cavity model. The results from simulations were used to compare against experimental data for benchmarking purposes of the RELAP5 deck. Additionally, RELAP5 was used as a predictive tool to guide planned test operations and identify expected system behaviors. In the first part of this report, details are provided of the cavity omitted model where heat flux is applied directly as a boundary condition to the risers. The general trend predicted by the RELAP5 model matches that from the experimental data when a single-phase natural circulation flow is first established, followed by an oscillatory two-phase period and finally a stable two-phase flow. However, the onset of oscillations is predicted early by the model due to the smaller thermal mixing region in the tank. However, by expanding the simulated thermal mixing region in the tank, the onset of oscillations predicted by the model is able to match that from the experiment. These oscillations where studied in depth and are deduced to be flashing-induced instability. The model was then modified to simulate an accident scenario case where a representative heat load based on the full-scale Framatome’s 625 MW t SC-HTGR was applied directly to the riser channels. The simulated initial and boundary conditions were identical to those performed experimentally, facilitating direct comparisons between the predicted and experimental results. It was determined that the results showed some discrepancies remain, likely due to the overprediction of vapor generation rate by the computer model. In the second part of this report, the cavity model is re-introduced where it is observed that the RELAP5 prediction is now able to capture the major trends of the observed flow commonly observed during two-phase conditions. However, the onset of oscillations is once again predicted early by the model, possibly caused by the underprediction of heat loss from the heater and cavity. This is likely due to the omission of support structures in the cavity that can act as additional pathways for heat to escape to the environment. To overcome the underprediction of heat loss, part of the insulation surrounding the cavity side panels and the back of the heaters are removed to allow heat to escape directly to the environment, which then improves the RELAP5 prediction. Parametric studies are also performed to investigate the effects of heater power, tank inventory level, and tank gas space pressure on flow behaviors, also in direct comparison to conditions tested experimentally. User option-61 in the RELAP5-3D input deck, which changes the heat transfer coefficient correlations used for calculating the vapor generation, is also investigated where it is found that by enabling the option, the overall duration of oscillations is increased and matches that from the experiment better. The RELAP5 model is further benchmarked with a header inlet- throttling case where it is observed that the prediction from the model fails to capture some major features observed in the experiment. By using a modified loss coefficient curve for the valve, the accuracy of the prediction is improved where most of the major features observed in the experiment are predicted by the model. Lastly, the model is benchmarked with an inventory depletion scenario where it is observed that despite the modeling limitation of RELAP5, the prediction shows good agreement with the experimental data where major trends and features are captured by the model. Future work will see continued development of the current RELAP5-3D input deck of the NSTF to both improve the accuracy of the model’s predictive capability and continuing serving the experimental program. The mutually beneficial relationship between analysis and experimental efforts has become integral to the parent NSTF program, and the greater objective to fully understand and accurately predict the heat removal performance of a full scale RCCS concept.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2021

Fast ion transport by sawtooth instability in the presence of ICRF-NBI synergy in JET plasmas

JET experiments have shown that the three-ion scenarios using waves in the ion cyclotron range of frequencies (ICRF) is an efficient way to build fast ion population through beam ion acceleration by radio frequency (RF) waves. Here, such a heating scheme is applied to plasmas with at least two thermal ion species. Analysis of mixed discharges with complex heating schemes requires a workflow that allows to model thermal and fast ion transport consistently. This paper is dedicated to modelling of a mixed plasma discharge with significant fraction of fast ions and contributes to development of fast ion transport models. For interpretive analysis with the TRANSP code a JET hydrogen-deuterium (HD) plasma discharge with neutral beam injection (NBI) and ICRF heating has been chosen. The task is complicated by NBI-ICRF synergy and plasma magnetohydrodynamic activity, like sawtooth crashes. D beam ions accelerated by RF waves form a high energy tail in fast ion distribution. Significant difference between the neutron rate computed by TRANSP and measured one is observed if the same diffusivity for electrons and ions is assumed. Sensitivity studies show that uncertainties in input plasma parameters and thermal ion transport models are crucial for modelling mixed plasma discharges and increased D transport is required to reach the plasma composition consistent with diagnostic measurements at the plasma edge. Fast ion redistribution by a sawtooth instability is characterised by non-resonant transport due to reconnection of magnetic field lines and resonant transport caused by resonance interaction between the instability and fast ions. With ORBIT simulations it has been shown that resonant interaction strongly affects fast ions of high energies, like beam ions accelerated by RF waves and fusion products. For the considered case, fast ion profiles simulated by ORBIT remain peaked after the sawtooth crashes.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Effects of the Wavelength of the Plasma Waves on Cross-Field Electron Transport in Partially Magnetized Plasmas

In this article, the effects of increasing plasma density on the cross-field electron transport driven by kinetic instabilities are investigated. A 2-D collisionless particle-in-cell (PIC) simulation is performed on cases with only singly charged ions and with a mixture of singly and doubly charged ions, at different levels of plasma density. It is observed using the PIC simulations that the level of plasma density affects the plasma waves that are driven by the microinstabilities, including the electron cyclotron drift instability (ECDI) and ion–ion two-stream instability (IITSI). Here, the simulation results suggest that the enhancement of cross-field electron transport is correlated with the excitation of smaller wavelength modes and the increased amplitude of the plasma waves.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗