Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SPECTRAL REFLECTANCE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44

The nanophase iron mineral(s) in Mars soil

Iron-enriched smectites have been suggested as important mineral compounds of the Martian soil. They were shown to comply with the chemical analysis of the Martian soil, to simulate many of the findings of the Viking Labeled Release Experiments on Mars, to have spectral reflectance in the VIS-NIR strongly resembling the bright regions on Mars. The analogy with Mars soil is based, in a number of aspects, on the nature and behavior of the iron oxides and oxyhydroxides deposited on the surface of the clay particles. A summary of the properties of these iron phases and some recent findings are presented. Their potential relevance to Mars surface processes is discussed.

Banin, A.↗

Observations of Mars using Hubble Space Telescope

The lack of a continuous record of Martian meteorology or of volatile cycles on Mars for extended periods of several Martian years seriously hinders efforts to understand the physics of the Martian atmosphere and surface system. The spacecraft observations are limited to only a few isolated time periods, and the Earth based record is limited by the relatively short periods surrounding oppositions when telescopic observations can yield useful data. To remedy this situation, the authors have embarked on a three year program of Mars observations using the Hubble Space Telescope (HST). Several scientific investigations are being carried out using the images, including: a study of the albedo variations; unit mapping of spectral reflectances; determination of optical depths due to aerosols and condensates; a study of the properties of condensate clouds and hoods; comparison of surface and atmospheric features; observation of size and shape of the polar caps; and investigation of surface atmospheric phenomena.

James, Philip B.↗

Biophysical, morphological, canopy optical property, and productivity data from the Superior National Forest

Described here are the results of a NASA field experiment conducted in the Superior National Forest near Ely, Minnesota, during the summers of 1983 and 1984. The purpose of the experiment was to examine the use of remote sensing to provide measurements of biophysical parameters in the boreal forests. Leaf area index, biomass, net primary productivity, canopy coverage, overstory and understory species composition data are reported for about 60 sites, representing a range of stand density and age for aspen and spruce. Leaf, needle, and bark high-resolution spectral reflectance and transmittance data are reported for the major boreal forest species. Canopy bidirectional reflectance measurements are provided from a helicopter-mounted Barnes Multiband Modular Radiometer (MMR) and the Thematic Mapper Simulator (TMS) on the NASA C-130 aircraft.

Hall, F. G.↗

Vegetation canopy PAR absorptance and the normalized difference vegetation index - An assessment using the SAIL model

Relationships are studied between the normalized-difference vegetation index (NDVI) and absorbed photosynthetically active radiation (APAR) in a vegetation canopy. The SAIL model of bidirectional canopy radiative transfer is employed to compare NDVI measurements that are instantaneous with diurnally integrated canopy APAR capacity. The NDVI measurements - taken at solar-zenith angles of more than 60 deg and sensor views of less than 40 deg from nadir - give stable near-linear estimates of diurnal APAR capacity. Discrepancies in the relations between APAR and NDVI are associated with variations in the optical properties of the canopy and with background spectral reflectance. The results are significant for the practical use of these remote sensing techniques but suggest that instantaneous observations can be used to characterize the diurnally integrated APAR in vegetation canopies.

Goward, Samuel N.↗

Remote sensing of cloud, aerosol, and water vapor properties from the moderate resolution imaging spectrometer (MODIS)

The authors describe the status of MODIS-N and its companion instrument MODIS-T (tilt), a tiltable cross-track scanning spectrometer with 32 uniformly spaced channels between 0.410 and 0.875 micron. They review the various methods being developed for the remote sensing of atmospheric properties using MODIS, placing primary emphasis on the principal atmospheric applications of determining the optical, microphysical, and physical properties of clouds and aerosol particles from spectral reflection and thermal emission measurements. In addition to cloud and aerosol properties, MODIS-N will be used for determining the total precipitable water vapor and atmospheric stability. The physical principles behind the determination of each of these atmospheric products are described, together with an example of their application to aircraft and/or satellite measurements.

King, Michael D.↗

Estimating Lunar Pyroclastic Deposit Depth from Imaging Radar Data: Applications to Lunar Resource Assessment

Lunar pyroclastic deposits represent one of the primary anticipated sources of raw materials for future human settlements. These deposits are fine-grained volcanic debris layers produced by explosive volcanism contemporaneous with the early stage of mare infilling. There are several large regional pyroclastic units on the Moon (for example, the Aristarchus Plateau, Rima Bode, and Sulpicius Gallus formations), and numerous localized examples, which often occur as dark-halo deposits around endogenic craters (such as in the floor of Alphonsus Crater). Several regional pyroclastic deposits were studied with spectral reflectance techniques: the Aristarchus Plateau materials were found to be a relatively homogeneous blanket of iron-rich glasses. One such deposit was sampled at the Apollo 17 landing site, and was found to have ferrous oxide and titanium dioxide contents of 12 percent and 5 percent, respectively. While the areal extent of these deposits is relatively well defined from orbital photographs, their depths have been constrained only by a few studies of partially filled impact craters and by imaging radar data. A model for radar backscatter from mantled units applicable to both 70-cm and 12.6-cm wavelength radar data is presented. Depth estimates from such radar observations may be useful in planning future utilization of lunar pyroclastic deposits.

Campbell, B. A.↗

Helium mining on the Moon: Site selection and evaluation

The feasibility of recovering helium (He) from the Moon as a source of fusion energy on Earth is currently being studied at the University of Wisconsin. Part of this study is selection and evaluation of potential sites for lunar He mining. Selection and evaluation of potential mining sites are based on four salient findings by various investigators of lunar samples: (1) Regoliths from areas underlain by highland materials contain less than 20 wppm He; (2) Certain maria regoliths contain less than 20 wppm He, but other contain 25 to 49 wppm; (3) The He content of a mare regolith is a function of its composition; regoliths rich in Ti are relatively rich in He; and (4) He is concentrated in the less than 100-micron size fractions of regoliths. The first three findings suggest that maria are the most promising mining sites, specifically, those that have high-Ti regoliths. Information on the regional distribution and extent of high-Ti regoliths comes mainly from two sources: direct sampling by various Apollo and Luna missions, and remote sensing by gamma-ray spectroscopy and Earth-based measurements of lunar spectral reflectance. Sampling provides essential control on calibration and interpretation of data from remote sensing. These data indicate that Mare Tranquillitatis is the principal area of high-Ti regolith of the eastern nearside, but large areas of high-Ti regolith are indicated in the Imbrium and Procellarum regions. Recovery of significant amounts of He-3 will require mining billions of tonnes of regolith. Large individual areas suitable for mining must therefore be delineated. The concentration of He in the finer size fractions and considerations of ease of mining mean that mining areas must be as free as possible of sizable craters and blocks of rock. Pending additional lunar missions, information regarding these features must be obtained from lunar photographs, photogeologic maps, and radar surveys. The present study is decidedly preliminary; available information is much to limited to permit even a close approach to final evaluations. As a prelude to recovery of He from the Moon, systematic exploration and sampling of high-Ti regoliths should therefore have a high priority in future lunar missions.

Cameron, Eugene N.↗

Composition of near-Earth asteroids

The continuing goal is to determine whether any of the near-Earth asteroids or the satellites of Mars contain hydrated phyllosilicate (clay) minerals. If these minerals are present, they would provide a ready source of water for propellant generation and use in life support systems. Many of the dark main belt asteroids have been shown to contain hydrated phyllosilicate minerals. Some of the near-Earth asteroids are also dark, but telescopic detection of water on these near-Earth asteroids is complicated because of the faintness of these small asteroids and because thermal emission masks the diagnostic spectral features beyond 3 microns due to water of hydration for objects within 2 AU of the Sun. New techniques for asteroid classification based on spectral reflectance and mineralogy will be necessary to determine whether the water absorption features are present on any of the near-Earth asteroids. This past year, better ways to classify 'wet' vs. 'dry' asteroids in the main belt were looked at. This new classification may allow us to determine the presence of water of hydration in the surface minerals of near-Earth asteroids even when we can only observe them at wavelengths that are not affected by thermal emission.

Lebofsky, Larry A.↗

Low Earth orbital atomic oxygen environmental simulation facility for space materials evaluation

Simulation of low Earth orbit atomic oxygen for accelerated exposure in ground-based facilities is necessary for the durability evaluation of space power system component materials for Space Station Freedom (SSF) and future missions. A facility developed at the National Aeronautics and Space Administrations's (NASA) Lewis Research Center provides accelerated rates of exposure to a directed or scattered oxygen beam, vacuum ultraviolet (VUV) radiation, and offers in-situ optical characterization. The facility utilizes an electron-cyclotron resonance (ECR) plasma source to generate a low energy oxygen beam. Total hemispherical spectral reflectance of samples can be measured in situ over the wavelength range of 250 to 2500 nm. Deuterium lamps provide VUV radiation intensity levels in the 115 to 200 nm range of three to five equivalent suns. Retarding potential analyses show distributed ion energies below 30 electron volts (eV) for the operating conditions most suited for high flux, low energy testing. Peak ion energies are below the sputter threshold energy (approximately 30 eV) of the protective coatings on polymers that are evaluated in the facility, thus allowing long duration exposure without sputter erosion. Neutral species are expected to be at thermal energies of approximately .04 eV to .1 eV. The maximum effective flux level based on polyimide Kapton mass loss is 4.4 x 10 exp 6 atoms/((sq. cm)*s), thus providing a highly accelerated testing capability.

Stidham, Curtis R.↗

Remote sensing of water vapor in the near IR from EOS/MODIS

Consideration is given to the selection of spectral channels in the near-infrared IR which are to be employed for the derivation of total column water vapor using the MODIS instrument on the NASA's Earth Observing System. Data obtained show that the three near-IR water vapor channels on the MODIS instrument enable remote sensing of the total column water vapor with an absolute accuracy of +/- 13 percent. An absolute accuracy of +/-7 percent can be obtained if additional MODIS channels are used to decrease the effect of uncertainty in the spectral reflectance of the surface, subpixel clouds, haze, and temperature profile on the derived water vapor.

Kaufman, Yoram J.↗

Air-surface exchange of H2O, CO2, and O3 at a tallgrass prairie in relation to remotely sensed vegetation indices

Parameters derived from eddy correlation measurements of the air-surface exchange rates of H2O, CO2, and O3 over a tallgrass prairie are examined in terms of their relationships with spectral reflectance data remotely sensed from aircraft and satellites during the four 1987 intensive field campaigns of the First ISLSCP Field Experiment (FIFE). The surface conductances were strongly modulated by photosynthetically active radiation received at the surface when the grass was green and well watered; mesophyll resistances were large for CO2 but negligible for H2O and O3.

Gao, W.↗

Contradictory clues as to the origin of the Martian moons

The meager available information that is pertinent to the origin and evolution of the Martian satellites is contradictory. The known physical properties of the Martian moons (density, albedo, color and spectral reflectivity) are similar to those of many C-type asteroids, the dark 'carbonaceous' objects abundant in the outer belt but scarce near Mars; thus this line of physical evidence suggests that Phobos and Deimos are captured bodies. In contrast, calculated histories of orbital evolution due to tides in the planet and in the satellites indicate that these small craggy moons originated on nearly circular, uninclined orbits not far from their current positions; hence dynamicists prefer an origin in circum-Martian orbit. Ways are described in which these apparently contradictory viewpoints may be reconciled, although a definitive answer to the origin of the Martian satellites will almost surely have to await in situ measurements.

Burns, Joseph A.↗

Green icebergs formed by freezing of organic-rich seawater to the base of Antarctic ice shelves

Samples of Antarctic seawater, basal ice, and green ice from ice cliffs and green icebergs are analyzed in order to examine green icebergs formed by the freezing of organic-rich seawater to the base of Antarctic ice shelves. Spectral reflectance of a green iceberg measured near 67 deg S, 62 deg E confirms that the color is inherent in the ice, not an artifact of the illumination. A constituent that absorbs blue photons is identified by spectrophotometric analysis of core samples from this iceberg and from the Amery basal ice, and of seawater samples from Prydz Bay off the Amery Ice Shelf. Analysis of the samples by fluorescence spectroscopy indicates that the blue absorption, and hence the inherent green color, is due to the presence of marine-derived organic matter in the green iceberg, basal ice, and seawater. Thick accumulations of green ice, in icebergs, and at the base of ice shelves indicate that high concentrations of organic matter exist in seawater for centuries at the depth of basal freezing.

Warren, Stephen G.↗

How diverse is the asteroid belt?

For approximately twenty years, many different asteroid taxonomies, which used many different observational data sets, have been developed to try to group asteroids into classes that contain members with similar spectral characteristics. However, to understand the structure of the asteroid belt, the resulting classes are only useful if they are grouping together asteroids with somewhat similar mineralogies and thermal histories. Until recently, these taxonomies have focused on spectral reflectance data from 0.3 to 1.1 microns and visual albedo. But in the last five years, observational data sets (e.g., 0.8 to 2.5 microns spectra, CCD spectra, 3 microns spectra, and radar albedos) for a small number of asteroids were compiled that can give a better mineralogical interpretation, but whose use in asteroid taxonomy was relatively limited. Analyses of these 'supplementary' data sets show that most asteroid classes contain members with different compositions and/or thermal histories. To understand the diversity of the asteroid belt, the number of objects with these observations must be expanded and used in the next generation of taxonomies.

Burbine, Thomas H.↗

Spectral mixing models of S-Type asteroids

This paper presents the results of an attempt to determine S-Type asteroid mineralogies with the use of Hapke theory spectral mixing modelling. Previous attempts to understand the spectral variations present in this single class of asteroids have concentrated on spectral parameters such as absorption band center wavelengths, band area ratios, and geometric albedos. The procedure taken here is to utilize the Hapke spectral reflectance model to calculate single scatter albedo as a function of wavelength for a suite of candidate end-member materials. These materials are then mixed linearly in single scatter albedo space, and the mixture is converted, assuming intimate particle mixing, back to reflectance for the spectrum matching routine. A total of 39 S-Type asteroids selected from the Bell et al. survey have been matched with mixture model spectra.

Clark, Beth E.↗

Galileo SSI lunar observations: Copernican craters and soils

The Galileo spacecraft completed its first Earth-Moon flyby (EMI) in December 1990 and its second flyby (EM2) in December 1992. Copernican-age craters are among the most prominent features seen in the SSI (Solid-State Imaging) multispectral images of the Moon. The interiors, rays, and continuous ejecta deposits of these youngest craters stand out as the brightest features in images of albedo and visible/1-micron color ratios (except where impact melts are abundant). Crater colors and albedos (away from impact melts) are correlated with their geologic emplacement ages as determined from counts of superposed craters; these age-color relations can be used to estimate the emplacement age (time since impact event) for many Copernican-age craters on the near and far sides of the Moon. The spectral reflectivities of lunar soils are controlled primarily by (1) soil maturity, resulting from the soil's cumulative age of exposure to the space environment; (2) steady-state horizontal and vertical mixing of fresh crystalline materials ; and (3) the mineralogy of the underlying bedrock or megaregolith. Improved understanding of items (1) and (2) above will improve our ability to interpret item (3), especially for the use of crater compositions as probes of crustal stratigraphy. We have examined the multispectral and superposed crater frequencies of large isolated craters, mostly of Eratosthenian and Copernican ages, to avoid complications due to (1) secondaries (as they affect superposed crater counts) and (2) spatially and temporally nonuniform regolith mixing from younger, large, and nearby impacts. Crater counts are available for 11 mare craters and 9 highlands craters within the region of the Moon imaged during EM1. The EM2 coverage provides multispectral data for 10 additional craters with superposed crater counts. Also, the EM2 data provide improved spatial resolution and signal-to-noise ratios over the western nearside.

Mcewen, A. S.↗

Analysis of pyroxene absorptions observed in Martian dark regions

We have investigated the mineralogy of the Martian dark regions by analysis of the pyroxene Fe(2+) absorption band near 1.0 micron in a set of VIS/NIR reflectance spectral images. The data used for these analyses were selected from a larger set, extending from 0.44 to 1.02 microns, obtained during the close 1988 opposition and covering substantially all of Mars south of 40 degrees N. This data set is being used in regional mapping of spectral parameters related to surface mineralogy. Martian dark regions are of interest in reconstructing the geologic history because they contain exposures of unaltered or little-altered basaltic crustal material; mapping differences in composition among dark regions could reveal regional or temporal variation in magmatic activity or mantle source composition. Two types of dark regions are seen, with the pyroxene band present and absent; where present, the inferred composition is in the range pigeonite-augite to very high-Fe, low-Ca pyroxene, with a two-pyroxene mixture possible.

Miller, J. S.↗

Optical effects of space weathering on lunar soils and the role of the finest fraction

Lunar soils represent a cumulative product of space weathering and as such they exhibit distinct optical alteration. In comparison to the optical properties of similar rock powders, lunar soils are darker, have weaker diagnostic absorption bands, and exhibit a characteristic red continuum slope between 0.3 and 4.5 microns. Well-developed (mature) lunar soils have a mean grain size of about 60 microns and may contain more than 50 percent agglutinates (complex, glass-welded aggregates) which were previously believed to be the principal carriers of optical alteration resulting from space weathering. A detailed analysis of the spectral reflectance properties of the bulk soil, size separates, and agglutinate separates of several Apollo and Luna soils has been undertaken to evaluate the validity of the agglutinate paradigm for optical effects of space weathering. The data and results are summarized here which indicate that the finest fraction of natural lunar soils, rather than larger complex agglutinates, carries the principal effects of optical alteration. Bidirectional reflectance spectra were obtained using the small sample configuration of the RELAB facility, which accommodates 5-30 mg of material. Spectra are displayed with the labels for individual samples listed in order of brightness.

Pieters, C. M.↗